Interesting, thanks for the video. And yes more upgrades.

@andreoli118

4 ай бұрын

No problem thanks for watching man

The two wires going to the carb. Goes to a carb heater. The choke is on the other side.

💯 going to do this as well. Yes please more upgrades!!!

@andreoli118

3 ай бұрын

Hell yeah man!

Nice!

@andreoli118

4 ай бұрын

Thank you

Did you gain any top end speed?

Nice upgrade, what part in Florida you in?

@andreoli118

3 ай бұрын

In south Florida dude

Hi all XR150L owners , The new carb sounds great but what carb is it and a link and parts number would be helpful , the carb boot number also would be nice along with the new air filter . And how much did the upgrade costs $ . And last was top speed improved and hill or wind made easier with more torque . Thanks for the video . Please add your thoughts and comments .

@andreoli118

4 ай бұрын

I will add the links of the parts i used. The carb made a huge difference in mid range/high rpm. Gained a ton of torque tru the whole rev range. It does burn a lot more gas but its way better. Im in Florida no real hills here but with wind it doesn’t loose its speed. Definitely worth it. Total spent was about 100$. You will have to play with the needles and jetting to make it perfect. Found this out after some more testing. Can post the needle and jetting settings used if you want them let me know.

@philipcloutier2553

4 ай бұрын

I would appreciate your settings, it will give us a good starting point , I am under 200 ft. , so that's good for me . I am curious as to the boys in Portland testing a 222 cc. Cyl. Big bore kit . with a cam . Sounds fun .

@philipcloutier2553

4 ай бұрын

Thanks for your listing and prices . Can't wait for another video with pics of speedometer top speeds . I am interested in what jets you picked and needle slot you picked . Again Thanks for your research and advice .

@remskiidadula7114

4 ай бұрын

What's the size of the new air filter?

@philipcloutier2553

4 ай бұрын

​@@remskiidadula7114 He listed the links the airfilter in the "description" along with carb and carb boot .

What exhaust are you running? Sounds good!

@andreoli118

3 ай бұрын

Stock with the baffle removed

Mine is a pz27 carb with a a 66mm bore, definitely have a nice power but thinkn of upgrading to 28mm to balance the speed

@andreoli118

4 ай бұрын

Defense worth it man.

@philipcloutier2553

3 ай бұрын

Am I correct in the size at just under 200cc. And what top speed did you get to . I am looking to go at least 70-75 mph.

Did you have to bore out the intake side of the motor to 28mm for the carb to work or did you literally just bolt it up? I want to upgrade to carb on mine.

@andreoli118

2 ай бұрын

Just bolted it up man, if you port the head to match the new intake tho it will help even more

@dustysteele5408

2 ай бұрын

Awesome!! What size jets did you end up using?

Thanks for the video. I bought one of these and put it on my XR150L. What size main jet did you end up using?

@dustysteele5408

24 күн бұрын

Have you figured out the jetting yet?

@dustysteele5408

24 күн бұрын

I can help if you need it.

@atherton-62

23 күн бұрын

@@dustysteele5408 I never got it running right, so I went back to the stock carb. What size jets did you use? I tried pretty much every jet, different clip locations on the needle.

@dustysteele5408

23 күн бұрын

@@atherton-62 what size carb did you end up getting? I was able to get a 28mm to work but it wants a 25 pilot with a 135 main at 6000’ in elevation. That’s with a cold air intake and a de-restricted exhaust. I also ported the intake and exhaust. Really the bike wants a 26mm. 28mm is recommended for 170cc-190cc. My bike is at 222cc now and I’m going to install a 30mm PWK.

@dustysteele5408

23 күн бұрын

I have a wideband setup to know for sure with tuning.

any idea if it will work with xr 125l 2004? ;) carb looks identical

@andreoli118

2 ай бұрын

Not really sure but it probably will work there all basically the same motors still

As someone looking at this bike to purchase, what's the difference in power that you'd get in changing the "jets" in the carb' verses adding a whole new carb? I get that this is an upgrade but I'm a linear guy....lol, I try to put numbers to paper so it's easy to see the difference? I've seen several people change the needles but you're the 1st I've seen doing this. I expect it to have a different sound & smoother run but do you know what the claims on this carb are, increased power wise? I'm sorry to be a pain in the butt, I like seeing the upgrade & I'm thinking about the bike so all this is important to me. thanks & peace

@ashtonpauley1382

Ай бұрын

Lmk what you find out coz same, got my eye on this bike

@user-dv7hb2sc9m

Ай бұрын

Wat'z Up Aston, I'm not an expert on bikes but since I don't have much money I don't mind researching & asking a lot of questions.... The idea of a new bike w/o any broken stuff that I can't see is a good reason to buy this. A new bike ain't like a used one that they didn't take care of. That said, this bike has been around in S.America/Asian countries for a lot of years so it's a proven reliable bike unlike the crappy Amazon/Chinese stuff for $2,000, you get this one for $2,800 + Dealer Fees($3,500) total. There's really nothing wrong w/ the carb on this bike except it will die on you like as you're leaving a stop sign if you don't give it lots of gas. Same on trails, in low gear you have to do a lot more gas/clutch to keep from stalling & that's why everyone talks about doing the carbs. This bike is not gonna get much more power no matter what you do & there is a big bore kit(piston & head) that'll make her a 220cc bike but even w/ that upgrade you still won't be carving up the Interstate Highways. This little bike is a town bike & you can safely ride her on a 60MPH Road but even then I'd let cars by you if they wanted by, you got the right to a lane but best to let em' go by you to be safe. But in town she's got enough to get ya where you're going. The carb fix is changing both JET's inside to a little larger to give more fuel but you don't have to do it & it doesn't make the bike faster, just keeps ya from stalling her which you'll learn to do anyway. You can open the airbox & fix the carbs all for cheap & it might get you a little more but not much & you really don't have to do anything right away. The 1st things I'd do is get a better set of tires & if you ride 70% on roads, 30% on trails, buy a decent tire for a 70/30 ride but only after using the ones on it for 2k miles or so. Overall, it's a good bike that'll get you around for cheap & that's why I'm looking hard at her. Also, when ya get ready, look for last years model b/c it will be less money for the same damn bike. Honda ain't doing major upgrades to this b/c if they do it's mess with all the Emissions & they are competing w/ Chinese Bikes that cost less so they don't wanna go to high. I'm an old guy looking at this bike b/c she's light & reliable, don't need much upkeep so ya ride her for a few yrs & leave it on side the road. Not really but she's a good bike for 1sr bike. Let me know if ya buy one? peace

@ashtonpauley1382

Ай бұрын

@user-dv7hb2sc9m fs man, it'll be closer to fall when I get mine. I plan on buying it out flat. I'm looking to make it my daily on decent nights to go to work. Thank you for your feedback really helps me out. I'm pretty sure imma get her just a matter of time

@dustysteele5408

23 күн бұрын

28mm is too large for the stock bike. It’ll work though. At 6000’ with a 30 pilot jet and a 135 main, it’s too rich at idle and actually wants a 25 pilot. (Also cold air intake, ported intake and exhaust, de-restricted exhaust) 28mm is recommended for 170cc-190cc. I have 222cc now and it’s still rich with a 28mm and 30 pilot. 30mm is recommended for 222cc. I’ll be able to give an update on jet sizing with a 30mm here soon. Upgrading the carb doesn’t really gain top speed, just more power in each gear. The 222cc definitely allows for higher top speed and hill climbing power. Need to test different sprocket ratios to test for higher top speed. An upgraded cam and heavy duty valve springs would also really help.

@dustysteele5408

23 күн бұрын

I can climb long hills now in 5th gear and it gains speed instead of loosing speed and having to downshift.

If only there was some sort of device that could hold the camera for you. Someone could make a lot of money with such a device.

@andreoli118

3 ай бұрын

Some should come up with it man!

@GSBW_

3 ай бұрын

This guy blinks one eye at a time. He might not even be human.

@andreoli118

3 ай бұрын

@@GSBW_ maybe not who knows