I've never seen a S2000 engine this clearly. That is a beautiful engine.

@lot2196

11 ай бұрын

My father in law owned one for 14 years. Loved that car.

My favorite thing about these engines is that they made a huge amount of power for their size and revved like crazy, and yet they use regular oil, they’re pretty reliable and they’re incredibly simple. It shows that with proper engineering, you can make a high performance engine without making it super delicate like the BMW S-engines and all of the Italian exotics.

@tjroelsma

Жыл бұрын

Yes, but it also shows how holding on to a concept for too long will see diminishing returns. When Honda introduced the V-Tec concept, everyone was blown away. And although Honda kept developing it somewhat, the competition didn't sit still and the VVT-L (Variable Valve Timing and Lift) concept simply outperforms V-tec. I think it's fair to say that what put Honda ahead of the competition with their innovative solution, also has held them back to the point of falling way behind that same competition.

@scarea2691

Жыл бұрын

@@tjroelsma are you talking toyota’s VVL like on the 2zz or VVL in general? because the k20 and f20 are VVL engines, vtec and vvl might as well be the same dual cam grind system, just different branding. The b18c still was just as good as the 2zz years behind the release of the 2zz and the k20 blows it out of the water

@2strokeFORever

Жыл бұрын

​@@tjroelsma im confused as to what you saying. VTEC is VVTL and iVTEC is VVTL plus VCT

@tjroelsma

Жыл бұрын

@@scarea2691 VVT and VVT-L in general. Other brands use pretty much the same system, but because Toyota has the rights to VVT and VVT-L they have to use different names.

@Oddman1980

Жыл бұрын

I notice that even with a sophisticated variable valve timing/lift system, they thoughtfully included some screw and locknut valve adjusters.

The S2000 was a hot little number - hot enough for Johnny Tran to win a sweet VW Jetta back in the day

@afrozen10-02

Жыл бұрын

Assuming you put 100 grand under the hood.

@brianl8983

Жыл бұрын

@@afrozen10-02 with overnight parts from Japan

@Dave-ms3ri

Жыл бұрын

Too soon, Junior.

@brianl8983

Жыл бұрын

@@Dave-ms3ri winning is winning

@sqmotorsports9230

Жыл бұрын

Slow clap for this comment and every reply. I live my life 1/4 mile at a time.

They're not just nice, high-revving engines, they're also reliable. My F20C1 has ~180k miles on it.

@monikhushalpuri

9 ай бұрын

Nice what oil change intervals you do? By the looks of the engine in the video the owner was fond of 8000+mile oil changes lol

@dudeman8323

6 ай бұрын

I ran the absolute pee out of mine and it has been simply incredible. Mine is at about 145k and it sits in my driveway mostly for the last decade. I'm the guy that blew the transmission at high speeds, the engine now has a slight tick but I am also a very sensitive listener to my machines. Definitely the best car I purchased 24 years ago...

@dudeman8323

6 ай бұрын

​@@monikhushalpurigoing to say my intervals were the 7500 miles as per the owners manual... made it 145k so far hard use... my Duramax just passed 740k with 15k intervals. Seriously, new owners screwed up big time by thinking "Oh it's new, lets change the oil at 1k..." which did not let the engine break in as intended with the factory fill. They continued to burn oil and lack full power. Actually, it was found early on that these engines needed a blend of synthetic and dino oil for good compression because 100% synthetic was a bit to slick for the piston rings in a newer engine.

These F20 series engines are very well engineered, reliable and pretty tough. So to see one blown up like this speaks volumes to how hard this engine was abused. They’re forgiving to an extent, this is what happens when you go over that limit.

@bradcomis1066

Жыл бұрын

Probably missed a downshift and went to 14000rpm for about 0.25 seconds.

@Spudchucker92

Жыл бұрын

@@bradcomis1066 The dreaded ‘money shift’ 💥😭

@lutomson3496

Жыл бұрын

maybe a track day though no baffles in the oil pan and oil starvation could have caused this also all the stuff in the oil pump meant it was still running after the damage...

@tanyav7888

Жыл бұрын

Mechanical over spin while going from 3rd gear position to 2nd instead of 4th. If you were to extract the DTC information from the E.C.U., you might possibly find 11,000 RPM failure!

@pedrodaniellopesferreira2916

10 ай бұрын

Japonese engines are usually good, so my guess is as good as anyone's guess here. Low oil over revving it seems to fit the scenario, but there is that 1.1% chance of something else.

Incredible engineering went into this engine iteration. They were miles ahead of their competitors. Not an inch of fat on this engine, superior use of space. I love watching your tear downs you are so explicit in your approach.

gets home from work (on a Saturday no less) with a fresh Domino's pizza and a tear down video. Perfect

I felt the presence and tears of angels while you were tearing down this gift from the engine gods. There is an S2000 in my family so I've experienced what a sweet engine the F20 is. It's amazing. Really a shame that this happened. The oil rings all looked like they were done. The engine probably ran low on oil and the rod bearings bore the brunt. Very sad. I need a drink.

@mfree80286

Жыл бұрын

Makes sense. If you're sucking air from the oil pan, you won't be pushing bearing material up to that solenoid screen.

@g2skinny

Жыл бұрын

Yeah dude hate to see something that cool just run past the redline for no telling how long those are cool little engines too bad it died

@mfree80286

Жыл бұрын

@@g2skinny I don't think it was running all that fast, maybe oil starvation from cornering or just running dry suddenly wiped out an already marginal rod bearing. One or two good hits against the cylinder head probably cracked the rod or jammed the rings wider than the cylinder taper (older engines develop a taper) and on the next downstroke it popped without blowing the corners of the crown off. Nasty amount of damage for not having a lot of heat signs though, when that bearing went it was sudden and violent, "go" to "blow" in probably a quarter second.

Wouldn’t even be surprised if this is the old engine from my brothers S2K. He money shifted it on the highway and it totally grenaded itself

@mediocreman2

Жыл бұрын

You mean he grenaded it lol

@diablocls55

Жыл бұрын

@@mediocreman2 pretty much

The original f20c had a factory redline of 9k rpm but in the AP2 generation was a stroked version, the f22c and it had a lower rpm in favor of some extra bottom end power. I would say that engine was 100% money shifted going from 2nd to 3rd. Its super easy to do plus the only way to rev the engine high enough to grenade a rod journal.

@antiochiaadtaurum3786

Жыл бұрын

you're saying they put it in 1st gear instead of 3rd?

@TheChannel1978

Жыл бұрын

@@antiochiaadtaurum3786 usually it's money shifted from 5th into 2nd, instead of to 4th. I don't think it's possible to money shift into 1st, the synchros won't let you (unless you are a total tool and force it).

@antiochiaadtaurum3786

Жыл бұрын

@@TheChannel1978 good point ,that would be one crunchy push into first

As a GM V8 guy. I appreciate how very well engineered and built Honda engines are. But I don't like to work on them. But I guess if you do the proper maintenance and don't overrev them. There's not much you need to do. I like the way the timing chain went to one gear that fed the 2 cam gears. Very robust looking design. It's a shame modern engines are so focused on fuel efficiency they have thin rings, plastic parts, and don't last as long

@pashaga3695

Жыл бұрын

I think you are confusing Honda with GM. Honda does not require any major maintenance, they are really easy to work on, but you really shouldn't have any real reason to work on them because they are reliable, unlike GM

@UnknownJinX

Жыл бұрын

​@@pashaga3695 While I would pick a Honda family car over a GM one for the most part, Honda did have its own duds. Ask any J35Z2 owners(there was even one teardown of it on this channel) or 98-05 V6 Accord auto trans owners and they will tell you. American automakers just can't quite figure out 4 cylinders. They are all designed by either their Japanese(Ford with Mazda, Chrysler with Mitsubishi) or European(GM with Opel, Chrysler-Fiat with, well, Fiat) partners.

@randymagnum143

Жыл бұрын

​@@pashaga3695 I don't know, an open deck siamesed bore engine would never last in an industrial setup. The cams running in bare aluminum would spell a short death too. The 350 GM engine was used extensively industrially, notably the Gleaner M combines. The Honda engine would never last in a caprice cop car, or a pickup truck, either. The Honda works OK in a lightweight, low stress application.

@jaredlancaster4137

Жыл бұрын

​@@randymagnum143 Agreed. Honda car engines are absolutely built for light cars, and only barely good enough to last in a light car. Really would not hold up too well in anything a whole lot higher stress.

@billdang3953

Жыл бұрын

Don't forget things like low tension piston rings, direct injection and open engine decks all in the name of worshipping the false gods of efficiency.

The way Eric always comments on how beautiful the timing chains are sometimes has me worried about what he does with them after work

@sat_sonic

Жыл бұрын

There is an enormous used parts market for every part.

@cirrusupdraft

Жыл бұрын

@@sat_sonic yeah, I understand that part, but it’s the way he says it that makes me worried about what he does with the chains

@chriscord6524

Жыл бұрын

Maybe him and his wife like to run a train on the chain? Or maybe it’s a chain bang? Or …..

@snoproblem

Жыл бұрын

Self-flagellation? Ouch.

@Evil12monks

9 ай бұрын

No kink shaming lol

I would love to see a teardown of a volvo t5, t6, or xc90 v8 motor, especially a s60r motor. Love your videos. Keep up the great work!

@bobkonradi1027

Жыл бұрын

I'd definitely like to see a Volvo 8444 V8 engine come apart. Its definitely an exotic engine. The one thing about Volvos, though, they employ the "excessive engineering" concept, so their engines might be a little more fragile than some others. BUT, a Volvo V8, 4.4 liters would be a good project. One thing I didn't know until recently is that this engine forms the basis of the Yamaha 4-cycle outboard marine engine, except its turned 90-degrees on its tail, and increased in displacement from 4.4 liters to 5.6 liters with a longer stroke crank.. Whatever. Go for it.

@bigman7293

Жыл бұрын

​@@bobkonradi1027wanna talk about over-engineering? The 3.2 straight 6 in the XC90 is another great start 🤣🤣 have fun doing a "basic" serp belt on one of those!

@GrimpakTheMook

Жыл бұрын

the S60R/V70R engine is awesome. It as an issue tho. I might be mistaken but the block is still the 250hp t5 one, but due to the extra HP and torque, the stress might cause the blocks to crack. Both cars (S60R and V70R) benefit tremendously having a blockguard put in the motor and a reinforced transmission link from the gearbox to the rear transmission shaft, two of the weakest spots in those guys.

@pubbiehive

Жыл бұрын

@@bobkonradi1027 The Volvo V8s were made by Yamaha so it makes sense.

What a beautiful engine. The cylinder head is a thing of beauty, the ports are so nice. There’s no casting flash anywhere either.

@dan4age

10 ай бұрын

Proper factory performance engine most aftermarket parts make it loose power

@slidey1788

9 ай бұрын

​@dan4age Hondas good engines seem to all be like that. I got a dc2r ( for rally purposes) that had a set of aftermarket headers on it. When they cracked, a factory exhaust went back on as a stopgap measure and the dyno reported 10 more hp.

This engine is a beauty of engineering - so well designed and built. It must have seen some serious abuse to grenade like that

@g2skinny

Жыл бұрын

Looks like about 8000 or so rpm got that one dude

@TheyCallMeMrMaybe

Жыл бұрын

@@g2skinny or a Honda bro decided to remove the rev limiter."yeah bro, my S2K can do 10k RPM easy."

@mediocreman2

Жыл бұрын

@@g2skinny Stock redline was 9k

@nitehawk4067

Жыл бұрын

Misshift from 3rd to 2nd gear while revving 9k ... How to destroy high revving engines

@quest8795

Жыл бұрын

Generally the bottom end holds together when the F20c is over revved, however the valve retainers are known to crack and cause them to drop valves, which does cause total failure if repeatedly over revved

I always love the Honda teardowns, but the F20c1 was a real treat. What an amazing piece of engineering. Thank you for the great video.

As someone who drove an AP2 S2000 for 7 years, I found this very interesting. Thanks for sharing it with us.

Never expected this engine! Nice find!

@quest8795

Жыл бұрын

I'm on 122k, I'd be interested if you've had to do any major maintenance on yours in your time- needed to change bearings or anything? I'm planning on doing rod bearings and valve retainers this year, as a bit of preventative maintenance

I'm a fairly recent subscriber, but love viewing the disassembly videos. Such a relief to watch someone working who really enjoys what they do combined with the gentle humour in the commentary, the first time I heard "disconnecting rod" nearly choked on my coffee. Also a relief to watch a channel that's not trying to sell us everything from VPN's to financial services. Yes of course you've a business to run and promote but it's done in a no nonsense, not shoved down your throat fashion. Love it 🎉🎉👍

I really enjoy you aren't just destructively ripping things apart. You follow the proper procedure to loosen cams, heads and cranks ❤

@slidey1788

9 ай бұрын

"This part is in really good shape" [tosses part across shop]...

F20 stock ran to 9k. Only the less interesting, but higher torque F22 revved to around 8k. Most likely this was a mechanical over-rev. Based on the aftermarket VTEC solenoid and the K&N filter, that guy had no idea what he was doing. So no surprise that he money shifted it.

I used to drive an AP2 S2K. Mine had the F22C1. Such a fun and responsive car. I hate to see them abused like this since they're so rare and beautiful. Thanks for posting this one!

first thing I noticed is that they have the wrong oil filter on it. There've been some reports that aftermarket oil filters can cause issues on this engine due to the OEM ones having been designed for a very high flow rate that the aftermarket ones might not be able to keep up with

Your vast knowledge of these engines and their components is amazing, a true technician in every sense. Bravo.

Rest in pieces F20C1 you will never be forgotten

I bought a 2007 S2000 that the engine failed shortly after I bought it. The first thing I found was crank end play of .125 and upon tear down I found thrust washers in the pan. Other damage was scored cylinders, three spun bearings, damaged crank, and damaged block. I suspect the previous owner neglected to check the oil level and ran it low. I was lucky to find a used engine for $4500 that came out of a 2007. I really love my S2000, it a thing of beauty to drive.

If only you would have removed that sweet k&n oil filter and cut it open to see how well it did or didn't work.

When the VTEC kicks in yo’

Something small that I love about your videos is where you put the links for your websites. They're always out of the way, and never block anything that you would want to see. Some you-tubers just slap them up and have them covering stuff you're interested in. You don't do that. Thanks!

I like how you were like, "Hey! This isn't bad at all. It's in great condition!" Then just launch it across the shop. 😂

Had a 2007. This engine was special, but the transmission was literally the best manual ever made in a production car. Also, whoever put a crummy K&N oil filter on this was a fool. It requires a special Honda OEM filter to survive at 9k. I'm very surprised there are any S2000s that have depreciated to the point of sloppy maintenance.

@bradcomis1066

Жыл бұрын

They were pretty damn cheap back in 2009. I bought one for $13.5k USD that year.

@randymagnum143

Жыл бұрын

Laughs in NP A833

@quinlansmith5857

Жыл бұрын

First thing I noticed too. That and the after market Solanoid. This engine was not cared for properly

Wow that’s a sad sight. Often touted as one of the best 4 cyl engines … it met a sad demise. Thanks for the tour. Owned a B18C engine and they are a great motor from a great era.

Always enjoy watching these tare downs! Engines I've never had the opportunity to work on.

Eric, with the S2000 engine it was all about NOT exceeding the piston speed, you really didn't want this baby to rev any higher than it was designed too. Things start to go badly if the rev limiter doesn't do it's job correctly. Thanks for showing us this beautiful engine in detail, and thanks for another nice video!

@brysonshires9742

Жыл бұрын

People spin k24's to 9500rpm. Granted they're built

@ericecklund676

Жыл бұрын

@@brysonshires9742 You can do that with a racing K24, by balancing all of the components and also tearing it down frequently to check your bearings, gaps and tolerances. I advise against doing that to a Built-for-the-Street K24, unless someone else is paying for your engines.

@brysonshires9742

Жыл бұрын

@@ericecklund676 I agree.

@volvo09

Жыл бұрын

​@@ericecklund676 yeah, I don't care "what other people are doing" I have gotten 100k miles so far of reliable daily driving supercharged enjoyment out of my k20. I only raised the rev limiter by 300rpm and I never really go that far anyways, I usually stick to the stock 8300 if I'm winding it out. Other people can blow up their engine or wear them out prematurely revving the nuts out of it on the street.

@ericecklund676

Жыл бұрын

@@volvo09 I have nearly 100k on my NA K24, in my Honda Accord. It's a fun grocery getter.

Love the hybrid chain/gear driven cams. Had a Suzuki TL1000 motorcycle that used the same design, which made removing and resetting the cams easy, which was needed as it used a standard (for bikes) shim under bucket system for valve lash. I noticed the gears are split with the teeth offset a bit. Couldn't see in this video, but in the TL there were springs tensioning the "split" gear to take up gear lash. It had a wonderful gear whine sound. That engine redlined at 10,500 RPM and it made 135 HP at 9,500 RPM. I believe the rev limiter kicked in at 11K. Bikes are awesome. The S2000 engine is quite motorcycle like in some respects.

Another great video Eric! I've learned a lot watching you tear down all kinds of different engines. I know you don't normally do VW/Audi engines, but I'd love to see a blown up VR6 get torn down!

We love the carnage!! Thank you!! Keep up the good work!!

Cool that you could snag one of these motors for a tear down. I owned an 06 S2000 for 10+ years and it was dead reliable thru lots of miles and autocross runs.

my car!!! i’ve been asking for this one for forever!!! thank you so much!!

Again, nice editing. It keeps the action interesting.

Happy Saturday! Really intrigued to see this one.

As an old gear head who has never torn down a modern engine, I find your tear downs relaxing and very interesting. I've now watched quite a few, and was wondering what would be considered a serviceable/reusable part, like aluminum bolts from a merc bi-turbo, cam gears, "exotic" chains, etc. Thanks for doing a great channel!!!

Dammit! No dipstick foibles. Excellent engine for teardown. Cheers and thanks 👍

I literally wear that same sweater everyday at work too lol. I've become known as the guy with the black Milwaukee hoodie on sites. 🤨 Love your videos though, it's always interesting to see a catastrophic failed engine being opened up. 👍

Very cool video, I've always wanted to see that motor torn down. Thanks again for all of your hard work, it's super entertaining!

Something about this channel makes me want to check my oil every Saturday.

@dennisgoans701

Жыл бұрын

And change it every other Saturday

Wow as an s2000 (AP1) owner to b specific it is a treat to see how my motor looks , thnk u .

I would love to see a W12

@A_Green_Plastic_Watering_Can

Жыл бұрын

I second this!

@nicholasvinen

Жыл бұрын

It would be a 17 part series but I bet it would be fascinating too.

I learn so much from this show

Almost 2 hp per cubic inch. Impressive

@Benzyl

Жыл бұрын

As impressive as a CBR125?

@ramblin327

Жыл бұрын

@@Benzyl no. Cbr125 only has 1.75 hp per cubic inch, and only has a total of 14hp.

If I'm correct, the cams for the vtec in the early to mid 2000 decade were ground at the Mushahi Auto Parts plant in Battle Creek, Mi. That plant made certain gears for Honda automatic transmissions. They were made from round stock, chopped off by a press, forged, lathed and hobbed there, then to heat treat, then shot blast, then final lathing with special cutting inserts in the machines. They shot blasted the gears, but they would have been cleaner and better finished using vibratory bowls, like the Roto Finish machines, but what do I know?

Love hearing your philosophy on auto makers leaving hp/to on the table. Much respect to the Honda engineers who designed and built this with that in mind.

This engine was designed to run at high RPMs, but with any I.C.E., the more you rev it, the more likely you are to damage it. Great video!!!

@LJC370

7 ай бұрын

This is where the quality of your oil choice really plays a role, most of these owners use cheap mobil1 and etcetera! Trust me!

I miss my S2000's, both of them, a 2002 and 2006.

Thank you! My wish list is complete now.

Awesome video Eric. That is a very small oil pump

Id love to see a teardown of the Volkswagen 5 cylinder 2.5L motors from the previous generations of Golfs and Jetta, do you see many of those engines?

@HenryJPB

Жыл бұрын

And the VW VR6 engine.

@aygwm

Жыл бұрын

There are plenty of those videos out there…

Intake ports look amazing given everything the engines been through. A beautiful engine to look at and review.

Never underestimate the holding strength of Hondabond. Without question it's one of the best RTV's on the market. Thanks Eric for another entertaining teardown.

Another great teardown video. Thanks

Great job as always 👏

Much love my brother, reminds me of the show "Scared Straight". Finding out what that little red line on the tack means can be very expensive.

I really miss the simplicity of those engines compared to what’s out now plus the good reliability.

I’ve always wanted to see inside of a blown up s2000 engine. Well done sir!

Reminds of my 2001 s2000 man I miss that car!

My college buddy had a Prelude with the same engine & man was it a fun car! It was a perfect car for school: MINIMAL MAINTENANCE BESIDES OIL CHANGES! He sold it with 350K miles & I was tempted to buy it, but I knew how it was driven & who knew what was left in it. Regardless, it was neat seeing this video as it was a trip down memory lane for sure!!!!

This is a wonderful video.

Genio...desde Argentina...keep it up

I enjoy watching you take apart these engines but the one thing I always think is that you must have the most incredible collection of bolts and fasteners in the world

Thank you sir again for a perfect video 👍

I wish Honda made an inline 6 version of this engine (or the K series). That would be awesome!

Honda seems to specialize in things with way more interior space than they should have (like that oil pickup) and engines that are designed at 90% or more of their ultimate potential that'll run forever if you treat them right.

K&N filter killed it for sure!

@joshlopez9056

11 ай бұрын

what’s wrong with them?

Great to see S2k engine finally! I hope I don't money-shift (over-rev) and destroy my engine. My S2000 is still strong with 250k miles while driving hard (redline every gear) like I ride my motorcycle. And yes, both S2000 and cbr1000rr seem to have same torque numbers...

@BobSmith-mc7uq

Жыл бұрын

Gooney....your luck will run out! Most likely through the side of the block.

Dude I wasn't expecting this one!

Loved this. I owned 2 S2000’s back in the days before I had kids. An ‘01 AP1 and an ‘04 AP2. Wonderful engines, wonderful cars.

Thanks for the video take care of yourself and family and be Blessed ❤️❤️ it. Almost bought one of those cars 05-06 but didn't.

I like how you disassembled this one like "Come on. Old Gill really needs these parts."

Hey peckawood, you a real cornball. I do love it.

Great video, very well done

Love this video. I wanted to see a teardown of an F20C!

Loved the design of the upper end of this motor.

That oil pan design itself shows how well Honda built this engine !

I recently felt that it was Saturday, that your video was coming, and that I had no beer. Well, too late now. I have never watched this channel sober before.

These engines are the closest you can get to having a high strung bike engine in a car. High revving, light, makes good power for size. Pretty sure the s2000 was a nimble chassis as well. Granted our bikes are 200+ BHP nowadays and only .9-1L while revving to 14k+ so not exactly the same, but same idea. Light and tons of reliable N/A power. Very cool engines and cars. Cool to see what makes one tick👍

@BigUriel

8 ай бұрын

If you want the bike engine in a car experience that's what the Mazda rotaries are for.

I love how you say "oh no" like you were gonna put it back together lol

Just wanna take a second to tell anyone who might be curious: the guys at importapart are grade A. Highly recommend checking with them if you're looking for something off the wall, or even something simple. Had an inquiry and response all within a couple hours. They didn't have the specific part I was looking for (headlight assembly for a Cadillac ETC, which are hard to find in good condition), but the customer service was excellent- to the point where they will be one of my go-to places for used parts from now on. Seriously, give them a shot

I like how you tear down engines like it's storytime.

Whoa! Didn't see this one coming.

Your Chanel is awesome brother

Seen this engine featured on jay lenos garage. Nice to see the tear down of it as well. Remarkable engine

A phrase normally heard on I Do Cars : "oh no that is not supposed to be there!"

One of my favorite cars! That motor revs like crazy but you can drive it like a civic. Hope to own one again someday

@volvo09

Жыл бұрын

Yeah, thankfully I got to drive one once when I was working at a dealer. It feels like a small displacement sport bike engine in a way... Meaning if you don't downshift a few gears and rev it out it's not really going anywhere, and the power builds as the revs climb. Very fun car, very reliable car.

Thanks for finding this engine

That was some interesting Honda potpourri in the oil pickup. You haven't tried to sneak "Cam the crack caps loose." on us in quite a while. I'm almost disappointed.

Love how high revs this engine would do. Great car.

Sitting in my RV, parked at turn 15 Sebring Int'l Raceway, enjoying the fine Florida weather. Watching the JP races (new series) and the WEC practices in preparation for next weekends 1000 Mile WEC race and Saturdays 12 Hours of Sebring Weathertech race. But I can't do without my weekly dose of destruction and mayhem courtesy of Eric. Great work as usual. See you next week. (Hey, maybe I can find you a Lambo V10 for a forensic study)

I think you have a awesome KZread channel

We love it when you disassemble unique engines and not the usual stuff. What we'd really like to see is you import a broken Ford Barra I6 from Australia, they are dirt cheap over there and you'd prob get on for little above import cost. I was over there for Summer Nats in Canberra in Jan and super high hp turbo Barras were everywhere. With few mods those I6s make well over 1000hp, reliably and we'd really like to see a standard one torn down to see what makes them so special and your opinion on them after the pulldown.

Wow good find! Definitely not common