purchased n installed with the cvt cover from ruck shop and used the 5g n 6g rollers i love it dude excellent n i love the new all black clutch bell. thanks

thank you for the actual how to. not just a skim over. keep it up!

Missing some of your shenanigans but this was a great instructional video. Thanks!

@RollingWrench

4 жыл бұрын

Thanks josh!

@4:27 Him: the only thing we’re gonna be using is THIS NUT!” Me: Yo!!! Pause! Put a Pause on that bro!

Nice video. Does the CVT cover fit back over the new clutch bell?

CVT Mirip punya honda vario ( INDONESIA) GOOD JOB Mr. 😁

I did the polini vareator with the 5.6 rollers bike does a easy 45 mph plus.

*_2 Questions:_* *1.* Will your Clutch Bell work with an Anklebiter CVT Cover? *and 2.* With Dr. Pulley Sliders now being a part the Transmission Kit, do you have a slider weight setup that will work well for a rider +200lbs?

I know this video is pretty old but will you restock these anytime soon? Been planning to buy it but doesn't seem like it'll come back

we have two different types of clutch bells. the one in the video is with a open face variator. if you run the cover the clutch bell is still performance, just not with the cooling fins do to fitment

@mosesbatist6008

5 жыл бұрын

Rolling Wrench ATV Scooter & Motorcycle

How fast did the ped go after putting the variator kit on it ?

will this work with a 2017 Ruckus ? What increase in performance can be expected. i.e. top speed

Nice video. How reliable would you say CVTS transmissions are. I’ve read that they are unreliable and expensive to repair in cars. I’d assume the same for scooters?

perfect work ;)

Excelente vídeo, felicitaciones.-

Is the new belt any longer or shorter than the factory Ruckus belt?

It will work with all get motors, it will work for you.

Hey hey! Recently got myself a scoot and looking into making some changes to the CVT! I have myself an electric impact driver but doesn't seem to be strong enough to get the variator nut off from the factory. Any suggestions to get the variator nut off or should I invest in a higher performance impact driver? Thanks for the amazing informative videos!

@matt1357111317

Жыл бұрын

You could try using a variatior tool to hold the pulley still and then use a socket wrench to remove the nut. It might help to tap on the wrench a bit with a block of wood or rubber mallet.

Hello bro, my motorcycle is a Honda click125i, but every time I start to go ,the engine will feel shakes. May I ask which part has problems? Thank you

thanks sir

There’s too much noise coming from clutch box in my scooter . I already changed clutch shoe and belt but still noise coming .will you tell me what to do?

Malossi Variator Installing for honda ruckus ? It comes with 2 Black Spacers / Washers ! 1 Large 1 & 1 Smaller 1 ! But my instructions are so small I can Not read them ! can you please tell me were they go ? Thanks you Very Very Much Thanks George

I already have a Polini variator. Can you just buy the clutch without the other stuff?

could you fit a polini variator in a standard gy6 A or B case? I hope this question makes sense. Thank you for your videos #SuperInformative

How fast does it go after installation?

Hey .... What about a kit for the "Big Ruckus" units.

The parts in this video are different than the parts shown on your web page on your "Honda Rukus/Metro Allready Assembled CVT Transmission Kit" as Listed in your performance parts. This video is accesable on your page when you cick on the CVT Kit. You show using the stock Drive face but the kit comes with the Gold colored lightened Drive face. The clutch bell is also different. Why? Also I cannot get the splined round ratchet part to go on the shaft far enough to engage the ratchet starter. (wont go on far enough. )The rear wheel is not on so I took the radiator off so I can hold the flywheel secure with a 17 mm socket on the nut. Im going to try tighten the Drive face nut that holds the washer on to the ratchet starter that holds the Drive face against the drive face boss to squish the belt to take up the slack. Dont know if this is going to work but I think it will. Your showing using different parts can cause problems as specific parts, specs, etc. are required.

Hey what are the expected gains

Will an open face cvt cover work with this upgrade?

Hi what makes this cvt.kit h.y. PO? Vs stock? What is the cost 2023?

is that the jog reaR PULLEY PLATES? THANKS CHEERS

This roller & bushing please put spacial grease

i was hoping to order the whole assembly kits to build this in my hometown , how to order?

I'm *much* larger than the average rider (6'10" 240). Are the supplied slider weights going to be appropriate for my size?

@RollingWrench

8 жыл бұрын

Let us know in the notes when you order we will put slightly lighter sliders in the kit for you.

@bigmike7801

8 жыл бұрын

Did you order this? Did you see any increase in performance?

@fast49cc78

6 жыл бұрын

Matt Heald Try 8 grams first, then 9 Good luck.

DOES ANYONE KNOW HOW TO GET THE FINAL DRIVE SHAFT OUT that the wheel bolts on to there is nothing online for it i mean nothing i think its a c clip ??? but i cant see it anywhere on the short side maybe under the seal on the long side ??

I have a 2013 eace supper b09 scooter,no top speed on this scooter,what can you do to help?soom say 5 gram fortop speedthank you

i have a 2003 metro. would this kit work for it? also i am kinda a bigger guy 6,4 230 pounds is ther any where i can get a little heavier springs for a metro?

@RollingWrench

8 жыл бұрын

We have used this on metro scooters as well. It works great, however the belt is not going to fit. We would need to find you another belt.

Today, the belt of my Zoomer/Ruckus exploded. I took it apart and I couldn't believe my eyes. The belt had almost no "teeth", they were all gone. The belt was just a bunch of wires and some teeth. Luckily, I was "just" 5 kms from home and the temperature was just 33 degrees celsius. :)

@martind349

6 жыл бұрын

Pedro Gordinho the kind of belt with which i am aquainted is good for 15,000 miles and mine was 11 years old and gave up the ghost at 15,500 miles.

Any videos on install and tuning the 20mm carb you have. I am interested. I have heard they are a pain but nice once dialed in. How much with weather influences the tune. I am in Oregon. Rain, cold, summer and more rain? Thank you.

@RollingWrench

4 жыл бұрын

I don’t have a video yet. That’s what I was kinda waiting on before I put this video out. They can be tricky to tune. If it’s in your budget I have a Plug & Play EFI system that works on the stock GET motor. It’s a 34mm throttle body. You will get the same performance or better than the 20mm carb, but with flawless running. It auto tunes to the atmospheric pressure. This is great for your area. Price is $630, comes with everything and the hand tuner to fine tune. No computer needed and comes with a nice base tune.

@vernonhochstetler7608

4 жыл бұрын

@@RollingWrench Is there a link to this product? I have some more question on the EFI system. I will wait to check it out 1st then Email you instead of here lol. Is this system on your site?

@RollingWrench

4 жыл бұрын

Vernon Hochstetler I haven’t released it. I currently have this system on only 4 other GET rucks. Runs great. I need to wrap up the GY6 system on the site then I’ll move on. But I would be happy to sell you a system

for how many kilometre cvtbelt should be changed

Nice,

is this suitable for honda click 125i sir?

Do you have a performance clutch for PCX150?

This kit is exactly what I've been trying to find! I am looking at it on your website, and I am not seeing an option to select slider weight size...

@RollingWrench

8 жыл бұрын

Our CVT kit is ready to go. We have spent hours tuning this kit so the buyer can just install it and go! I hope this helps :-)

@RollingWrench

8 жыл бұрын

Our CVT kit is ready to go. We have spent hours tuning this kit so the buyer can just install it and go! I hope this helps :-)

Do they make a kit like that for the Zuma?

no grease on the variator rolls?

so THATS how you put a belt on. Me i would just struggle like crazy trying to get it wrapped on. totally not realizing i could just bring in the clutch -__-

Thats the grand axis 100 engine?

what's the size of the spacer?

what does it cost? my metro goes about 35 with my 6' 4" body on it. any idea were i can get a heavier rear spring for a 2003 metro?

@fast49cc78

6 жыл бұрын

Topeka Kansas Amazon

What RPMs is this setup tuned for?

Hey man were can i buy this kit in canada?

My Mz moskito special edition top speed 150kmh

What will the new topspeed be with the new kit? :)

@fast49cc78

6 жыл бұрын

Robin Eriksson Most likely 5 to 7 mph, get a CDI w/rev limiter,

will it fit a metropilitan jazz 2003

@Rolling Wrench - Can you give some rough #s to us regarding the different in top speed before/after this kit has been installed? Also, I've already got a Polini variator on the way - still interested in the clutch and weights though - can you sell me the kit minus the variator?

Please help. Lol i want to mod my ruckus were can i buy this in canada

Does this work for the honda ps 125

"this fits all Honda Ruckus's from 2003 to 2011 GET motor" what about for the 2012 model with stock motor? I'm looking to upgrade

@ciphermkiii

9 жыл бұрын

Ty G GET motor is the same as stock. It's just another name for it. Buy happily!

@PowerBeeEngine

6 жыл бұрын

Damn the "Happy" comments

We have the 2020 Ruckus, we did exactly as you did, x3, the clutch was extremely hard to open to add the belt (for my grandson, 25) you made it look much easier. Could the clutch be faulty? It does happen on occasion. The issue we are having is lost performance, also the spacer is getting chewed up. We are experienced, what could be the issue? Is the spacer NOT needed on the 2020 Ruckus? I am not finding much information on this issue, I did find some info on battlescooter.proboards.com/thread/3383. Thanks for any help!

@heytodd53074

Жыл бұрын

He doesn't reply much

No need for deep 8mm socket. Regular works too.

@RollingWrench

3 жыл бұрын

True

piagio block ?

Why dont put some grease oil in variator?

@RollingWrench

4 жыл бұрын

Not a good idea, if grease gets on the belts that’s a bad thing

Better then the Polini or Daytona Drag?

@robertwatson1688

8 жыл бұрын

Still use with the NCY CDI?

can you still use kit with cvt case cover.

@RollingWrench

6 жыл бұрын

Lawrence Co yes you can :-)

Every time I click on one of these vids, I wait to hear about the new setup... WHAT are you trying to achieve with this setup...not one person mentions what the "Performance" gains are with a different setup. Are you trying to hold a low gear longer? Are you trying to get more top end? WTF is the point of the new setup??? Not one word is said about what the new CVT is going to, or trying to do...I find that extremely Odd.

@Ess5Hundee

7 жыл бұрын

He says it right after a minute in, faster take off and higher top speed. Did you even watch longer than 8 seconds?

@SquillyMon

7 жыл бұрын

I watched the whole thing unfortunately... must have missed it.

@Ess5Hundee

7 жыл бұрын

We know, your time to become aware will come..

@PowerBeeEngine

6 жыл бұрын

1 min 10 secs. he states that improves take off and higher top speed. As to other comments about "more than fucking aware" There is no lower gear to hold longer. It's just one gear. It's a CVT... there are no gears. Come on Son!

@lemonadegrave

5 жыл бұрын

SquillyMon you should just delete your stupid comment, save everybody wasting time reading your foolishness

Will this fit 2005 honda metropolitan?

@Ethan.s..

2 жыл бұрын

Yes

Does the kit work for the 2017 ruckus?

@RollingWrench

6 жыл бұрын

Yes 👍🏻

@mindrunner18

3 жыл бұрын

What about the 2019-20 ruckus

@Ethan.s..

2 жыл бұрын

@@mindrunner18 it works on all ruckus’s 03-22 and probably future models not yet released.

@honeyglazeham9621

2 жыл бұрын

@@mindrunner18 2022 too?

is this kit for nsp50 ruckus?

@EbolaSquirrel

4 жыл бұрын

3 years late but yeah

will this work on a 2022?

@RollingWrench

2 жыл бұрын

Yes. All rucks are the same from 2002-2022

Do you have a kit like this that will fit a 2016 49cc TaoTao?

you should of mentioned that it depends on how much you weigh.. pretty important ..

@jamesjacobs2264

8 жыл бұрын

Isn't that like fuckin obvious? It's a scooter. Don't ride it if you weigh more than 200lb. They are meant for active people in shape not blimps

@joshuamoss9056

8 жыл бұрын

+James Jacobs. what? hahaha 200 lbs guy can ride, theres jets that goes up to 100 and bigger weights/slidders 😂 i ride with others and there was a 200+ guy riding one and hitting 60. nice troll though... 😂

@jamesjacobs2264

8 жыл бұрын

+Joshua Moss Let me reiterate. Yes you can ride a ruckus and weigh 200+lbs. The ruckus just wasn't designed to hold that kind of weight for its speed output. It was designed for skinny Asian drivers not overweight Americans. Do you see my point?

@jamesjacobs2264

8 жыл бұрын

+Joshua Moss Btw, I hate how your average American needs to stretch the ruckus out to drive comfortable. Just consider yourself blessed if your short & lightweight. It's no wonder the ruckus is popular with females

lol, this is probally more reliable then the Nissan car cvt

dude. YOU INSTALLED THE OLD VARIATOR COVER. THAT COVER HAD A WELDED IN RESTRICTION SPACER! YOU WILL NEVER ACHIEVE THAT NEW CLUTCH POTENTIAL. GRIND DOWN THE VARIATOR COVER (BELT RIDE SURFACE SIDE) TO A SMOOTH PLANE -SHAVING OFF THE SPACER. DRAW A MARKER LINE ON THE BELT SURFACE OF THE VARIATOR TO RECORD BELT TRAVEL ON THE VARIATOR SIDE. ON THE CLUTCH SIDE, ENSURE THE BELT SEATS FULLY DOWN ONTO THE SHAFT. THIS WILL ENSURE FULL BELT SURFACE USE THROUGHOUT THE POWERBAND.

why u take the kickstarter off its useless

the background music is SO annoying.

@christopherdillon6303

Жыл бұрын

ROLLING ROCK 🪨 🎶FROM ROLLINGWRENCH..🎶

witout cover this is not good the engine can breake in half

@lawrencelimco

6 жыл бұрын

no it wont brake just chace of stuff going inside cvt case.