Honda Civic, Brake System Flush, 8th generation DIY service flushing your brake fluid
Автокөліктер мен көлік құралдары
Flushing and bleeding Honda Civic brake system 8th Generation, easy one man do it yourself job, that saves hundreds in future repairs, step by step instructions.
Please help support my channel by using my Amazon Affiliate links:
Battery Acid Filler: amzn.to/3Ko4ihg
Turkey Baster: amzn.to/4c0suCf
drain Pan: amzn.to/4c0ndud
Ratchet 1/4" swivel: amzn.to/3vY0LSL
Mechanic Gloves: amzn.to/3OcULfu
Safety Glasses: amzn.to/3HvBYbx
One man brake bleeder kit: amzn.to/48SgzoV
Honda Brake fluid: amzn.to/480rbAK
Brake Cleaner: amzn.to/3SDfewo
Brake Bleeding Wrench: amzn.to/3w41jXh
ANPUDS 1/2-Inch Drive Torque Wrench: amzn.to/3THpwfW
ANPUDS 3/8-Inch Drive Click Torque Wrench: amzn.to/3tDkLcI
ANPUDS 1/4 - Inch Drive Click Torque Wrench: amzn.to/41F3mwX
#automobilerepair #brakefluid
Пікірлер: 62
Made my own brake bleeder from a video I found on YT. It's so so. But the one you used seems way more convenient and it has the magnet to attach to the car. Thanks for sharing, you have good videos
@dannysdiygarage
Жыл бұрын
Appreciate the comment👍🏼
Great Danny, will try soon to flash brake system. Thanks!!!
Thank you boss!
I’m so thankful you took the time to make this video.
@dannysdiygarage
27 күн бұрын
Thank you for stopping by and watching, appreciate your gratitude
No it doesn’t damage the master cylinder, yes, that is correct 8 time pushing the pedal is sufficient, the main thing is not to run out of brake fluid in the master cylinder as you’re flushing, once clean fluid comes out you can stop, it could only be 4 times
Awesome video, I just did my brakes 3 months ago completely rebuilt brakes front and rear with new calipers on my 2007 EX Coupe . Flushed system with harbor freight brake pressure bleeder for 34.00 tht connects to brake bleeders and a compressor awesome tool, it took me 45 mins,fluid was black as coal, car from Miami Florida, thks for sharing,
@dannysdiygarage
Жыл бұрын
Awesome story Scott, thank for sharing
Thanks Danny. I'm going to give it a try!
@dannysdiygarage
Жыл бұрын
Easily accomplished, good luck and let us know how it turns out
Thank you for all your videos, it has helped me alot
@dannysdiygarage
Ай бұрын
You're very welcome! Appreciate your support
One step not mentioned…Spray the inside of the brake nipples with brake cleaner then dry them out with compressed air before putting the rubber nipple caps back on.
Good job, Thanks a lot
Thank you for your these videos
@dannysdiygarage
2 ай бұрын
Appreciate your gratitude
Another awesome video Danny. Thanks. Although I did miss your great soft music you usually play. Ha ha
@dannysdiygarage
Жыл бұрын
Appreciate you 👍🏼
Just subscribed. I like your style. Nice tutorial
@dannysdiygarage
7 ай бұрын
Welcome, I appreciate your support
I love the turkey baster idea. I've always used a large syringe. But the plunger tends to degrade over time, so I have to keep buying them. The turkey baster seems like it would hold up longer, plus you can pretty much operate it with one hand, as opposed to the syringe which you kind of can use one handed, but it's not nearly as easy.
@dannysdiygarage
11 ай бұрын
Turkey basters are also cheep to purchase
Great video. Thank you
@dannysdiygarage
10 ай бұрын
Appreciate your comment, thanks
Great video!
@dannysdiygarage
8 ай бұрын
Appreciate you
good video
Danny i love the video. Thanks for making this. I saw another method where you can use a vacumm extractor tool to attach to the bleeder valve and pump the trigger to extract/suck out the brake fluid from the line into a container. Don't need to go into vehicle and pump pedal. Not sure which method I'll use at this time. Question: What product did you use to epoxy your garage floor? Did you DIY that ? or have company come in and do it for you? I'd be interested in you doing a video on how you did your floor if you did it yourself?Thankyou!
@dannysdiygarage
7 ай бұрын
Yes DIY job, I actually have two videos on the garage floor, here kzread.info/dash/bejne/q3uEqdxpmbq0Yc4.htmlsi=rSRg_v1c3N9Sj8ah
Hi Danny, I have Honda Civic X 2018 model and i am planning to flush it's brake system for the first time. Do i need to push the brake pedal all the way down, wouldn't that damage master cylinder seals? Further, what i got from your video is that u pushed pedal 11, 8, 7, 8 times from farthest to nearest. Hope to hear from u soon. Thanks
Great video. Instead of a turkey baster, I use a battery acid filler - you find these in battery accessory section of auto parts stores. Bulb has a bit more capacity.
@dannysdiygarage
2 ай бұрын
appreciate your input, great recommendation, I added it to the description on what to buy to do the job
Thanks for the video… can you please make video on how to diagnose hard steering wheel ?
@dannysdiygarage
Жыл бұрын
I’ll put it on my list, I’d love to know more about your steering issue
@PanjalsDIY
Жыл бұрын
@@dannysdiygarage thanks for the reply… I don’t have any issue with steering, I feel bit hardness while turning at slow speeds even I changed my steering fluid recently but no use I suspect that it is an issue with suspension bearings…
@dannysdiygarage
Жыл бұрын
Thanks, that’s a great idea for a video, (Checking Suspension), appreciate the feedback
Hi Danny, Nice video...! Kindly help me out with following query; Before replacing front and read brake pads, callipers' pistons are pressed inwards and fluid level in reservoir comes to max level subject to there isn't any leak in system. Do we need to bleed air in that case? Thanks.
@dannysdiygarage
Жыл бұрын
short answer is no, check out this video I did on replacing pads, around the 3 minute mark I explain this process about pushing your old fluid back into your reservoir, kzread.info/dash/bejne/pIeHl62Jj5XTfLw.html
Great video thanks Dan. Is there any specific torque to tighten the bleeder screws? Also my son’s car has rear drum brakes. I assume the process is still the same but the different size wrench mentioned at the end? Thanks in advance!
@dannysdiygarage
7 ай бұрын
Yes process is the same, I’m sure there’s a specification, I didn’t use it, tighten it and check to make sure it doesn’t leak and you’re done
@timt7657
7 ай бұрын
@@dannysdiygarage thanks Dan have a great holiday ahead.
@dannysdiygarage
7 ай бұрын
@@timt7657 you also ❤️
Hey Danny, The Honda service manual says bleed order is front left front right rear right rear left. Would you recommend following the Honda service manual in this case?
@dannysdiygarage
Жыл бұрын
I would recommend following the owner manual recommended procedure, mine came out perfect, I should have read the service manual
@vandiyplant921
Жыл бұрын
@@dannysdiygarage I noticed Toyota Camry service manual specified the order you did here. Service Manual for civic and accord state the bleed order as clockwise starting with driver front and ending driver rear (when thinking of a top down view of vehicle)
@niconoypirynn
9 ай бұрын
Perfect and clear. Sped up the video 1.5x and it was perfect. Thank you very much.
Hi,Thanks for the video. Im from Malaysia and i have a 2012 Honda Civic 2.0s (9th Gen). The honda brake fluid that i will be purhasing is 1Litre. Would i need more than a litre of fluid to do a proper flush on all four tyres? Hope to hear from you soon.
@dannysdiygarage
Жыл бұрын
yes that should be enough
@taqlatif
Жыл бұрын
@@dannysdiygarage Thank you. Appreciate it 👌
With drums in the back is it the same process or you just do the front end? Thanks Danny
@dannysdiygarage
Жыл бұрын
Same procedure
@naitch1761
Жыл бұрын
@@dannysdiygarage ok thanks
Danny, would this procedure work the same for my wife Hyundai Santa Fe??
@dannysdiygarage
Ай бұрын
Yes
How much fluid was needed ?
@dannysdiygarage
9 ай бұрын
Two 12 fluid oz bottles was plenty
Do i need to release hand brake while doin this sir?
@dannysdiygarage
7 ай бұрын
Probably a good idea, however it will work either way
My caliper bleeders are snapped off thanks Midwest salt
I'm all for using OEM parts and fluids but any name brand brake fluid will work just as well and be a lot cheaper. Honda doesn't make their own brake fluid.
@dannysdiygarage
Жыл бұрын
Great information, thanks for adding