Please teach your techniques to others whoever wish to learn. You're a good teacher.

@TinkerBod

3 жыл бұрын

You are a sweet talker, if i could earn a living at it i would restore bikes all day long, cheers for the positive comments...

nice well done i got a blue one here in OZ

Very well done. Proper amount of detail, as if looking over your shoulder.

@TinkerBod

3 жыл бұрын

Thank you very much!

You can open up the oil feed when you install a high pressure pump,but I know your keeping it’s totally standard!👍 I couldn’t ever do this😃

@TinkerBod

Жыл бұрын

I hear you and understand what you are saying but for me this bike had to be as close to factory as i could get it nowadays. I am working (very slowly) on a ST70 DAX which i will be modifying very slightly which will have oil cooler and oil pump, cheers for the positive comments, all the best..

Bro. Your work is very best and vip

A gifted man , brilliant videos,i have learnt alot

@TinkerBod

5 жыл бұрын

Wow Cheers for the kind words. Sorry about the quite bit a 13:12 I got done for copyright infringement for 35 seconds because the radio was on in the back ground, I kid you not. Anyway big thanks, All the best....

@gerraymomd392

5 жыл бұрын

Your welcome

Awesome brother

@TinkerBod

3 жыл бұрын

Thank you very much 👍

Great mechanical and video instruction. Thank you Sir for taking the time to explain in such great detail. My bike is 1971 Honda CT70 4-speed with manual clutch. I have completed rebuilding the bike and will be working the engine next.

@TinkerBod

5 жыл бұрын

Thanks for the comment, appreciated. I will be doing one soon on my ST70 which is very similar to your CT70 (which is well worth a restoration such a lovely bike you have), but centring on kick start slip and how the clutch works as there are so many inaccurate explanations of how the clutch works and why the kick start slips on youtube. Then I dare say there will be an overview restoration video of the complete ST70 but not as detailed as the CF70 vids. All the best, hope your bike brings you as much joy as mine does. 👍

@gusmanley-clarke5634

3 жыл бұрын

@@TinkerBod did you ever get round to a ST70 video?

@TinkerBod

3 жыл бұрын

Yes and no. I have some video done on the ST70 which will not be released yet as i dont think their is enough content. We are moving house and everything has stopped since July when the workshop got filled with house moving boxes, hence the lack of videos. It is coming but im not sure when, regards.....

@gusmanley-clarke5634

3 жыл бұрын

@@TinkerBod I look forward to it. Good luck with the move.

@TinkerBod

3 жыл бұрын

Thank you, all the best

nicely done!

@TinkerBod

5 жыл бұрын

Thank you. They are cracking little engines, toying with another one soon on the ST70. Might end up a video.

Good Video Well explained

@TinkerBod

3 жыл бұрын

Thanks a lot...Cheers!!

Cool 🔥🔥🔥👍👍👍👏👏👏

@TinkerBod

5 жыл бұрын

Thank you sir. 😀

สวัสดี ครับ 😍😍😍

Eu já tenho a dax st 70 Depois honda chaly cf 70 Eeee gorilla z50j😮😮😮😮😮😮

Hi. Did you explain how to set the timing chain tension? Thanks for the video! Awesome work

@TinkerBod

Жыл бұрын

Sure did and blew the myths about getting the cam 180deg out 👍Cheers for the positive comment.....

waiting for part 5

🎥 👍

@TinkerBod

4 жыл бұрын

Thank you....

Could you put valve grinding paste on a sheet of glass?

@TinkerBod

5 жыл бұрын

As long as it was very very fine that would work, I have always preferred the stone method and if far out Engineers blue and a surface table with Tungsten scraper but this would only be for larger castings.

Can you help me with my wiring on my CF70??

@TinkerBod

3 жыл бұрын

Hi, Have you watched the wiring video, did this not help?

@anastasisch2224

3 жыл бұрын

@@TinkerBod which one is the wiring video??

@TinkerBod

3 жыл бұрын

Not as much as i thought watching it through, thought there was more but here you go. kzread.info/dash/bejne/mKFhyqRrp8rVfco.html

Por que le puso cinta negra al cigueñal lado del volantre?

@TinkerBod

2 жыл бұрын

Not sure i know what you mean, where about in the video

@0scarHz

2 жыл бұрын

At minute 53:36, I see that you put black tape on the crankshaft on the flywheel side, why is that?

@TinkerBod

2 жыл бұрын

Sorry for delay, the tape was to stop the woodruff key falling into the engine while it was on its side for the video that's all.

Someone says me that he can make the engine go from 4 gear to neutral when the bike moves with 80+