Thank you

This is clean. Very impressed. I’m sold.

@DENALIElectronics

2 жыл бұрын

Love it! It is a killer setup!

Seriously cool! I'm going to get this setup, when I get my bike!

@DENALIElectronics

Жыл бұрын

You will love it! The AT is a sweet bike, but customizable lighting takes it to another level.

What a great company - I was just about to order the OE Honda ones.. Glad I found this in time.

@DENALIElectronics

2 жыл бұрын

We are glad you found this too! We hope you enjoy your new DENALI gear!

Love from DeKalb Mississippi USA 🇺🇸

@DENALIElectronics

2 жыл бұрын

Appreciate the love!

@aishkan

2 жыл бұрын

How, when we can get this exact setup for standard DCT 1100

This set up is clean. Best plug and play I've seen so far. Specifically I love the controller and it's functions. It would be nice if you can make same one for right side of the handlebars to control aftermarket heated seats. Every single one on the market right now it's bulky and looks like does not belong to the motorcycle.

@DENALIElectronics

2 жыл бұрын

Thanks for the kind words! I will pass on your suggestions to our design team about the heated gear.

Hi, I'm thinking about installing the D3 on my Africa twin, but I would like to take advantage of the installation now, and take advantage of the fn button. (I live in Spain) Could you upload a video with that upgrade fog kit you have? I would like to see a video

any plug and play applications for the Rebel 1100 yet (without positap splicing)?

@DENALIElectronics

2 жыл бұрын

We do not currently offer this option. I will pass on your comment to the design team!

Hi Denali, on this 1100 Africa Twin, can i install only a set of S4 pods with the Denali wiring, the Denali Datadim Dual intensity controller & the Denali Switch plug eliminator?

thats top!!! are u working for DARPA? amazing vid

@DENALIElectronics

Жыл бұрын

If you have a connection on securing government contracts, let us know. We can design lights for any application!

I did a fair amount of research then chose Denali D-4 with Data Dim for a Yamaha FZ-07. Just found a video where a yootooober did some comparisons. I finally got around to installing crash bars which should be a good place to mount the D-4's. I hit a deer over a year ago. I had to replace headlight assembly , Radiator , Forks ect.. I won't know until after I try them how much Improvement the D-4's will give me. I replaced my OEM Halogen bulb with an LED bulb in the OEM headlight. I can adjust the headlight angle so it is correct for high beam or correct for low beam.. If the Low Beam is focused correctly then the high beam will be too high . I suppose I will adjust the High beam to Optimum ..and hope the D-4's on 50% will help me a lot on Low Beam. Anyway looks like this yoootoob channel has many great videos on auxiliary lights.. kzread.info/dash/bejne/l5mbw6qonNLQlLw.html

@DENALIElectronics

2 жыл бұрын

You will love the D4's, especially compared to stock. Even at 50%, they are drastically better than any OEM headlight that we have seen. Abikething is one of our dealers in Europe, his videos are great! 👍🏼

@mikeskidmore6754

2 жыл бұрын

@@DENALIElectronics Thanks, Yes I assumed the D-4's will still make a big Improvement. At age 61 I just got my first prescription driving glasses which are always fogged up on the motorcycle or snowmobile. I have been told I am early stages of cataracts. I bought a new Snowmobile in 2014. I thought the headlight was really bright , now not so much. Skidoo makes a bolt in place flood light .. with a 3 position switch. The sled was already wired for the light . all I have to do is bolt it on and plug it into the OEM wire harness and sockets and install the 3 position switch .

Hola, i am from colombia, i working in Honda Dream. in the place medellin. I really like what they do for the Africa 1100

@DENALIElectronics

Жыл бұрын

Thanks for watching our video!

Hi if i want to order the whole set is there any category show them all together on the site?

That sold me. Will it work on a 2021 AF ES DCT?

@DENALIElectronics

6 ай бұрын

Yes!

good video. Im trying to decide whether to buy the dialdim harness or the cansmart. What exactly are the main differences? The use of stock buttons and switches?

@DENALIElectronics

9 ай бұрын

denalielectronics.com/blogs/blog/denali-dialdim-versus-cansmart-which-is-right-for-me

Hi does the battery running out quickly by installing D7 lights?

Great lights, great quality. Could you let me know which cable you connect to the high beam? I have tried both: low beam and high beam, but the lights did not work correctly. When connected to the high beam (blue wire from the trigger harness to the black wire with the blue stripe on the motorcycle) the light works opposite: I can dim them on the high beam, and only full power on the low beam. When connected to the low beam, the dim function does not work at all. Please help. Thank you.

@DENALIElectronics

2 жыл бұрын

It is pretty tough to troubleshoot via KZread comments, give us a call or a chat online and we will get you taken care of: denalielectronics.com/pages/contact-us

Can you please list the posts to install this lights? It's a little confusing ( harness, dual dim, van smart)

@DENALIElectronics

2 жыл бұрын

Which part is giving you difficulty? In this video we outline installed the DENALI DialDim Controller. The DialDim has the harness included and you simply connect it to your battery and connect your DENALI lights to the harness.

all nice and professional Then Use a Positap

@DENALIElectronics

Жыл бұрын

The kit shown in the begginning of this video is our universal DialDim that uses positaps to install on any motorcycle. The install shown is using the plug and play adapter specific to the CRF1100 Africa Twin. No positaps are needed to install this product to an AT. denalielectronics.com/products/dialdim%E2%84%A2-lighting-controller-for-honda-africa-twin-1100

FYI, my 2021 has the pre-wire for fog lights, but no settings in the computer when you jumper the DTC port. I'm curious if the settings only show up after you terminate to a light?

@AT2021Rocker

5 ай бұрын

Did you ever find out? I’d like to wire to mine as well but there doesn’t seem to be info available. It’s gotta be easy to use the factory plugs?

@eformance

5 ай бұрын

@@AT2021Rocker my research indicates the NA bikes didn't have the software to control these plugs. I just bought an EZ-CAN and got on with life. I even went so far as to dissect the software update, looking for references to the lights, based on the Honda instructions for UK bikes.

I have the same 2022 adv sport. Now in Chicago. No one seems to know how to install these here. Any recommendations on shops ? Thanks

@DENALIElectronics

Жыл бұрын

No one knows how to install the DialDIm? The included instructions are about as straight forward as it gets. Any shop should be able to install the DialDim. If your mechanic has questions, they can always give us a call.

@Asdfghjkl1234

Жыл бұрын

@@DENALIElectronics ok. Ordering now. Of any issues will reach out. Thank you.

One of my D4s flickers a little bit with the Data Dial. Any ideas why?

@DENALIElectronics

2 жыл бұрын

Reach out to our customer service team for specific assistance on your lights/bike: denalielectronics.com/pages/contact-us I have my personal D4's setup with the DataDim and a switch on my old commuter car. If I don't turn my headlights on while my D4's are switched on, mine will flicker until I turn on the headlights.

Magnifique , je voudrai faire la même chose sur ma Honda NT1100 DCT de 2023 , hélas Honda France m’a dit que le faisceau été multiplexé et qu’on ne pouvez rien modifier . Je voulais mettre le tout nouveau top case GIVI Maxia 5 Limited Edition avec clignotants et feux stop intégrés au top case , il parait que c’est impossible . De plus dans le courriel reçu de HONDA FRANCE si je modifie l’éclairage , je perd la garantie de la moto . c’est vraiment pas sympa 😱. j’aimerai tellement mettre vos éclairages avant et le Klaxon , car malgré que ma moto soit une GT elle n’a pas grand chose coté équipement . Je pense que l’Africa Twin est similaire à la NT1100 , même châssis , même moteur donc au niveau du faisceau électrique ça devrait être pareil ? à Bientôt Marcel Muller de Toulon , sud de la France 😉

Have to admit I was surprised to see Denali still used micro USB on the ezcan product like we are are still living in the 2010. At least add USBC but why wouldn't you just add Bluetooth and make a mobile app to update settings on the fly?

@DENALIElectronics

Жыл бұрын

There are solutions in the works for bluetooth integration, but as of now micro USB is still reliable and works great for this application!

@imopn

Жыл бұрын

@@DENALIElectronics jeez mate micro USB is dying so quickly. Many laptop don't even have regular USB A anymore. Heck the amount of people who don't even buy laptops anymore is also growing. Europe banned any small Device to charge with anything else than USBC forcing even apple to comply. There is no way you can defend still using old micro USB in 2022 Let's hope you get a Bluetooth version soon with a mobile app. It is 2022 afterall...

Does this work with crash bars? Say altrider bars?

@DENALIElectronics

2 жыл бұрын

the light mount? It likely doesn't fit with the AltRider bars. I suggest simply using our bar mount to the crash bars: denalielectronics.com/collections/universal-light-mounts/products/lah-00-10300-b?variant=15068397863012

spielerei !