so when if you are just topping up you fill it right up and the level will go down eventually and might need to top up a little bit more

How you you open the bleed drakain plug

Great video! I'll try opening the engine bleed valve tomorrow. I spilled some coolant from undoing one of the radiator hoses, but the level in the reserve tank hasn't budged. My car also looses coolant and I can't find the reason. It took 3.5 liters until full and I had changed the coolant a year ago. I knew it was low but I only realised how bad it was after it started to overheat after 20 mins of idling. The heater also feels somewhat weak. Any idea how to bleed the internal cycle?

@enginium6043

2 жыл бұрын

That's a tough one but I would redo it. It sounds like you have a nasty air lock somewhere. Any dampness after being left for a while? If you redo it you can drain everything you have out as it sounds like not much came out. When you change the coolant put the heat on max but the fans on low. Was your coolant clear when it came out?

Hi

@enginium6043

2 жыл бұрын

Hello 👋

How much coolant have you used ? thx

@enginium6043

2 жыл бұрын

Depending on how much you get out about 6-7 litres. I used one and a halfish 5l honda coolant jugs

@jerryorange6983

2 жыл бұрын

@@enginium6043 Perfect thank you. Take care.

@enginium6043

2 жыл бұрын

@@jerryorange6983 let me know how you get on!

@jerryorange6983

2 жыл бұрын

@@enginium6043 I will. In 2-3 weeks

@hemtet5500

2 жыл бұрын

I would really have loved to see the bleeder valve clearly identified and how it was opened? Thanks