Great shop project!

@bellevuesnekkeri

9 жыл бұрын

Carl Jacobson Thank you Carl for the kind comment, much appreciated

Fantastic Roy....see this happening in my shop someday. Wish I had your massive stash of hardware and BB plywood.

@bellevuesnekkeri

9 жыл бұрын

***** Thanks Tyler, Just start collecting other peoples throw aways....and youll be loaded:) I am lucky to be able to get all the free BB. Thanks for watching and commenting

Thank you for the nice editing job and for not talking on and on about your life, problems and ideas!

The best i've watched so far because the design makes perfect sense! Great stuff, thank you so much for this!

@bellevuesnekkeri

4 жыл бұрын

Thank you very much. It has served me well, and still functions good. Thanks for watching and commenting👍😀

Good one!

@bellevuesnekkeri

9 жыл бұрын

John Heisz Thank you John, much appreciated

@juliomorales4100

9 жыл бұрын

Smart

@bellevuesnekkeri

9 жыл бұрын

Julio Morales Thank you Julio

very cool - I'm loving that rotary vacuum joint - and thanks for the shout out, I really appreciate it!

@bellevuesnekkeri

9 жыл бұрын

Nick Ferry Thanks a lot Nick, it actually keeps the seal suprisingly well. No problem Sir, you deserved it, and please bring on more cool projects and you great attitude.

ABSOLUTELY FREAKING BRILLIANT!!

@bellevuesnekkeri

5 жыл бұрын

Thanks Gary, glad you liked it

what an awesome little build. Love it.

@bellevuesnekkeri

7 жыл бұрын

Thanks Angie

Love it!!! Fantastic idea and execution of it.

@bellevuesnekkeri

9 жыл бұрын

P Lemieux Thank you very much for the kind words

Thats funny.. makes me laugh with joy to see work like that so clever... save hundreds going to the hardware store. Excellent craftsmanship.:)

thank you i learned very much from this video

AND THAT TRICK WITH CUTTING A CIRCLE BY PUTTING A SCREW IN THE MIDDLE....AMAZING!!

@bellevuesnekkeri

5 жыл бұрын

Thank you

Great idea and works really well.

@bellevuesnekkeri

9 жыл бұрын

David Lowe Thanks a lot David, I am very pleased with the result

Oh yeah! Way better. I need one of those for my compressor hose reel too

@bellevuesnekkeri

9 жыл бұрын

WoodRodent Thanks, There are great commercial available ones for compressed air, as I think the fitting for the swivel would have to be pretty tight not to leak from the forces of the compressed air. Thanks for commenting and for watching

@fredflintstone8048

9 жыл бұрын

I bought a pretty nice reel for my compressor hose at Harbor freight. So far it's working great and the pivoting union doesn't leak. Regarding this vacuum hose reel, it would be nice to rig up a crank handle on one side. My Harbor freight compressor hose reel has the crank and it makes it really nice.

@bellevuesnekkeri

9 жыл бұрын

Fred Flintstone Hi Fred. I did not mean that commercial ones would be in danger of leaking, only a DIY version, considering the pressure it is under, but of course with some metalwork it would be possible. I did some fiddeling and may do a video on a motorized version, but its really fast to reel it in, so we´ll have to se what happens.

@fredflintstone8048

9 жыл бұрын

Bellevue Woodshop Hello Bellevue. Understood. My comment about the union not leaking on the inexpensive Harbor freight unit was meant mostly as a recommendation. The rotary union looks a lot like the rotary units used for fittings on compressed air tools and auto oilers. The rotary union on the HB unit looks something like this: www.ebay.com/itm/FIT-COMPRESSION-ELBOW-04A-Swivel-use-on-air-engine-1-4-Tube-to-1-8-NPT-Male-/281391973625?pt=Motors_Car_Truck_Parts_Accessories&hash=item418444c4f9&vxp=mtr

Great job! I especially like how you ffward the boring bits.

@bellevuesnekkeri

8 жыл бұрын

+Edward Jahn Thanks Edward. I try to not include to much repetition and boring stuff, but still want to show most of the process. Thanks for watching and commenting

I have an idea for an upgrade! Add a setup like your power feeder to reel the hose back in ! Great project Roy I would do this but I don't have a long enough hose to bother with !

@bellevuesnekkeri

9 жыл бұрын

Tom Howbridge Thanks Tom. i did fiddle with the idea of motorizing it, but then again I would have to make the controls easily available, but we´ll see what happens. It is very fast to unroll it and roll it back. But then again, automated stuff is awsome. I actually found the hose in the dumpster. its for a central vacuum hose.

That was awesome BW!!!

@bellevuesnekkeri

8 жыл бұрын

+All-Pro Quality Garage Doors Inc. Thank you

Great job!! Great idea!!

@bellevuesnekkeri

9 жыл бұрын

paulsjunkcars Thank very much

I've been on KZread for years and have never seen 800+ thumbs up and ZERO thumbs down. Impressive.

@bellevuesnekkeri

9 жыл бұрын

Jason Ray Thank you Jason. Yes I noticed that now.....how did I manage to not offend anyone?, but it would bee cool to get 1K and still zero thumbs down:) Thanks for watching and commenting

Muito bom , organizaçao sempre é bom! parabéns.

@bellevuesnekkeri

9 жыл бұрын

Leonardo Rinaldes Muito obrigado leonardo, é muito mais fácil de usar e que não está no caminho

dude that is pretty cool

Fantastic! Would you mind sharing the diameters of the spool and crank wheels. Thanks

Awesome! Well done!

@bellevuesnekkeri

8 жыл бұрын

+JonnyK2025 Thank you. Glad you liked it

Well done, great joint connector to allow for swivel, I will have to try and make this, thanks...

@TtHampton

9 жыл бұрын

U can't do it

Great job, wanted to see if I could do something similar as here in the uk can’t seem to find one you can buy unless getting one shipped from overseas.

@bellevuesnekkeri

3 жыл бұрын

Thanks. Glad you found it useful. That was my main motivation as well, as this is not available here 😀👍 in Norway either

Sanno Baby, Sanno. Super clean job and great vid, thanks.

@bellevuesnekkeri

9 жыл бұрын

divyajnana Thank you Sir,

Pure genius

I have got to build one of these! I have never seen a "Lazy-Susan Turntable" used before like that! This will very handy in my small work area!

@bellevuesnekkeri

9 жыл бұрын

richie4ohio It is a real space saver. The lazy suzans worked out great as they have the donut hole to accomodate for the pipe in the middle

@richie4ohio

9 жыл бұрын

Where is a good place to buy that much hose?

@bellevuesnekkeri

9 жыл бұрын

richie4ohio I found my at the dump. Its an old vaccum hose from a central vacuum system. I would check your local supplier of central vacuum system if they have a returned faulty one. I bet you will get it cheap

Wow, I like this a lot!

@bellevuesnekkeri

9 жыл бұрын

***** Thanks Fredrik

Grande ideia...gostei das ligações. Obrigado

@bellevuesnekkeri

9 жыл бұрын

Filipe Soares Muito obrigado Filipe. Que bom que você gostou, e obrigado por assistir

Very nice.....what a difference that made.

@bellevuesnekkeri

9 жыл бұрын

WestCoastMods Thanks, I was in the shop today, and used the shopvac on 3 different tools that i propably would not have bothered before this one

@WestCoastMods

9 жыл бұрын

Bellevue Woodshop I know the feeling....

Nice job!

@bellevuesnekkeri

9 жыл бұрын

Ron Briz Thanks Ron

Great build! I need the diy version of the Rockler hose reel just like you made it. I envisioned it the same. What diameter lazy susan parts did you use and were the metal plates on the outside just for extra reinforcement?

@bellevuesnekkeri

3 жыл бұрын

Thanks Jason, I think it was a 4 or 5" lazy susan. The fixingplate was just how these came when I purchased them. Thanks for watching and commenting

Nice job 👍

clever, and well made!

@bellevuesnekkeri

9 жыл бұрын

ChicoMillion Thank you very much

Great idea, now that i've seen it I need it! One question: do you note lower sucking power?

@bellevuesnekkeri

9 жыл бұрын

Marcos Magnasco Thanks Marcos, glad you liked it. The resistance of the 30 foot hose will of course affect the suction power, but I did not notice any major difference that connecting it directly

Excellent build! Thanks! How does the non rotating hose (outside) connect to the inner pvc which rotates?

@bellevuesnekkeri

7 жыл бұрын

Thanks. The swivel from the vacuum cleaner has a locking shoulder. you can see it here 1:16

@MRrwmac

7 жыл бұрын

Bellevue Woodshop So sorry to make you go to the trouble of pointing that out to me! I really appreciate it! I thought I saw every second but obviously I missed it. I should have rewatched it a couple times to answer my own question! Thanks again!

@brianflower5490

4 жыл бұрын

Bellevue Woodshop 9

Great cool job!

@bellevuesnekkeri

5 жыл бұрын

Thanks

well what can i say but THANK YOU was thinking i could do with something like this for my shop can i ask where you got the metal pars from please

@bellevuesnekkeri

8 жыл бұрын

+joseph woodhouse Thank you for watching and commenting Joseph. Glad you found it useful. The bearings are often called lazy suzan bearings. I bought them at a woodworking store in the UK

Nick you're awesome thanks

@bellevuesnekkeri

4 жыл бұрын

Nick?

Nice 👍🏼

@bellevuesnekkeri

5 жыл бұрын

Thank you

Great video!

@bellevuesnekkeri

9 жыл бұрын

Zach BudanoThank you Zack

Where did you get that hose? Is it one continuous length? What is the inner/outer diameter? Is it a pool vacuum hose? Thanks in advance.

@bellevuesnekkeri

5 жыл бұрын

The hose ia an old vacuum hose from a central vacuum system in my home. It is 10 meters long. I think it is 36mm OD

Very good idea. Thanks for sharing

@bellevuesnekkeri

9 жыл бұрын

***** Thank you for the kind words, glad you liked it

Nice work. I was intrigued by that hole cutter. Was that homemade or purchased and if so where? I have a need for one like that.

@bellevuesnekkeri

9 жыл бұрын

Mike Kapotsy Thank you Mike. The hole cutter is an adjustable commercial cutter. The cutterblade is adjustable and there are 2 in the set, so it can cut sizes from aprox 22mm up to 75mm. the auger at the end thou, makes it useless unless you predrill for it. The threads are way to aggressive for the size of the cutter, and it stalls any drill I have tried, or nearly breaks you wrist. It is bought here locally at a store chain much like Harbor Freight in the US

@MikeKapotsy

9 жыл бұрын

Bellevue Woodshop Thanks, desperately need one. The one I bought from Harbor Freight didn't do the trick but one like yours definitely would. I may have to fabricate one like it on my own.

@bellevuesnekkeri

9 жыл бұрын

Mike Kapotsy PM me your email adress and I will send you some closeup images of it if you need any details

@MikeKapotsy

9 жыл бұрын

Ok I tried to do that, hopefully you received it. Let me know if not. Thanks.

@bellevuesnekkeri

9 жыл бұрын

Mike Kapotsy I di not recieve any PM. try bellevuesnekkeri(at)gmail.com

Neat Idea.

Отлично получилось, мне очень понравилось!!!

@bellevuesnekkeri

9 жыл бұрын

titaniki Спасибо за комментарии и делиться видео

Is the white fitting from inside the reel floating within the black hose connection from the outside?

@bellevuesnekkeri

4 жыл бұрын

Yes Sir, that is correct

Very nice design and build......

@bellevuesnekkeri

9 жыл бұрын

Jim Pell Thank you Jim, for watching and commenting

Where did you purchase the "rotary vacuum joint"? or did you make it?

@bellevuesnekkeri

6 жыл бұрын

The rotary function is just from the swivel of the snap on hose connector from the vacuum cleaner

Where did you get the adjustable drill bit your using a 1 min 22 sec in the drill press?

@bellevuesnekkeri

4 жыл бұрын

I purchased it at a local hardware store like HF here in Norway, it is adjustable, but has an auger in the centerr, and if you do not predrill you are in for a supprise!!!, the pitch is waaaay to large for the cutter to be able to remove the material. You might be able to find it on ebay though

Excellent!

@bellevuesnekkeri

4 жыл бұрын

Thanks William

Nice vid.... But where do you buy the parts to connect the reel and have it spin?

@bellevuesnekkeri

4 жыл бұрын

Thanks Tony. all the white parts are regular 40mm waste pipe. The swivel action is from the snap on connector already attached to the vacumm cleaner hose. It swivels on the thin plywood plate

Great idea.

@bellevuesnekkeri

9 жыл бұрын

Ray Parker Thanks Ray

nice as hell

I need to do this for a 30 ft shop vac hose. ROCKLER has one but it’s $200 which is insane for what it is. Thanks for the idea.

@bellevuesnekkeri

2 жыл бұрын

Thanks for watching

Очень полезная штука для настоящего мастера !!!

@bellevuesnekkeri

7 жыл бұрын

большое спасибо

I love this idea. Could you post a more detailed explanation of the hose connection that allows for the spin?

@bellevuesnekkeri

8 жыл бұрын

+TT OKC Thanks. If you check out at 1:16 you will see the vacuum hose has a bevel/taper that makes a sort of a seal with very little friction. When the hose is snapped in place and locked with the 2 spring loaded plastic clips on the hose 1:27 it seats the connector on the hose inside the pipe. the pipe of course has to be fixed to not move when the fitting is pressed against it at 2:32. Hope this makes sense:). Thanks for watching

awesome...always wondered how to make the static connection

@bellevuesnekkeri

4 жыл бұрын

Glad you liked it

hey that's pretty great!

@bellevuesnekkeri

9 жыл бұрын

EL CHAPPY TAN Thank you very much

Veldig kjekt! Tror du det ville vært vrient å lage trommel som trekker seg automatisk tilbake? Jeg har ingen anelse om hvordan slike tromler egentlig fungerer, så vet ikke om det er vanskelig eller ikke. Vet bare at det er veldig praktisk!

@bellevuesnekkeri

9 жыл бұрын

Bjørnar Magnussen Begynte å bygge inn en retract fjær laget av bandjern, litt likt slikt som på en startfjær på en påhengsmotor startsnor. Var nok for lite carbon i det stålet, og det mistet mere å mere kraft for hver gang jeg trakk den ut og inn, så ble aldri noe prosjekt video av det. større sjanse for en motorisert retur.

impressive..

Brilliant.

@bellevuesnekkeri

9 жыл бұрын

Mark Hazlewood Thank you Mark

Is that a square metal flange (bracket with a round central hole)? What size is that?

@bellevuesnekkeri

5 ай бұрын

It is a off the shelf LazySusan. Not sure of the dimension

Hey Roy. What a great idea! I bet there's a lot of people out there that could do with one of these in their workshop. Does it lose any suction through the rotating centre?

@bellevuesnekkeri

9 жыл бұрын

David Handley Thank you very much David, it sure beats trying to untangle the 30 foot hose every time i nedd to use a tool. The reality is that it never got used before. I have not noticed much loss. I did plan to put an O-ring on the swivel part, but it has a taper which you can see at 1:20 that makes it seal good. the two pipes is also a reasonable tight fit

Hadde forventet automatisk opptrekk av slangen, kanskje det kommer i v.2 ?` Ellers kjempegreier som alltid :)

hahaha that's absolutely fantastic!!! =D

@bellevuesnekkeri

9 жыл бұрын

Nelson Baietti Thanks, glad you liked it

Neat idea.

@bellevuesnekkeri

7 жыл бұрын

Thanks

Nice vac hose reel. Is that a 50' x 1.5" hose & what size turntables are those ? Is there a parts/cut list/website ? Thanks.

@bellevuesnekkeri

3 жыл бұрын

Thanks Pat. Yes I think it is close to these dimensions. It is an old hose from a central vacuum system for domestic homes that I trash picked. If I remember correct I think those are 6" x6". o plans for this one unfortunately, but check out my website for my other plans at www.bellevuewoodshop.com👍😄

Neet, thankyou...but wheres the roller upper handle?

@bellevuesnekkeri

8 жыл бұрын

+Coffieman5150 Thanks. I have not found the need for one yet

very good👍👍👍

@bellevuesnekkeri

6 жыл бұрын

Thanks

we made one of this but the hose makes a terrible howling noise as soon as we turn the hoover on. it only stops when we pull all the hose out and keep it straight. don't you have the same issue?

@bellevuesnekkeri

6 жыл бұрын

I cannot say I have noticed this issue, but some howling noise will always be present. My 30 foot home central vac hose make some noise to

You sir, are a Genie's Arse ! Absolutely brilliant : ) Only thing I didn't recognise was the rotating ring affair : ( Looked like a dis-assembled castor base plate but… ? Maybe a sturdier mono mount could be possible to make a cranking handily an option ? Not the hose length needs it though : ) Have you seen Alex's work on the TehDoor channel, I think you'd appreciate his ingenuity and philosophy on how to as well. Thanks for sharing, I'll stash this one away in the good idea's file : )

@bellevuesnekkeri

9 жыл бұрын

John Smith Thank you John for the generous word, it is much appreciated. The rotating ring is a lazy Suzan (just google it if you are not familiar with these) Monomount is an option, or maybe a motorized version, as someone else commented. I have subbed to TehDoors channel for some time now, and that dude sure has amazing ideas and contraptions, it is absolutely worth recomenting

Thank you

Nice and clever. I need to make to of them. Someday. Seems like all I get to do these days are change diapers.

@bellevuesnekkeri

9 жыл бұрын

finn127 Thanks Finn, The day will come, trust me....I was in your shoes just a couple of years ago

Hvor kjøper du så fin kryssfiner? Byggevarekjedene har jo bare møkk 12mm. Vet GustavsenAS har, men bare BYRE småplater..

@bellevuesnekkeri

9 жыл бұрын

Stig øvreberg Hei. Nå er jeg i den heldige situasjonen at jeg jobber på en fabrikk som produserer baderomspanel, med kjerne av baltisk bjørkefinèr i møbelkvalitet. Har nærmest ubgrenset tilgang til noen prøveplater som brukes for å måle herdermengde med. Disse måler 400mm x 1250mm x 9mm, og er supre til jigger og maler. men Ville sjekket firmaet som Bjørnar referer til, og så har du jo Oslo finèrfabrikk om du befinner deg på østlandet

Have you written plans for this? Thought about a solution for a hand crank, motor, or spring retraction? Would love to build something like this for my garage ceiling, for pulling down the hose when needed, then retracting when done.

@bellevuesnekkeri

9 жыл бұрын

David Marcus I have not made any plans for this yet, might write up some free plans, but the plan would have to be suited the length and diameter of hose and the lazy susan one have avaialble. But there might be a simple free sketch on my website. I have fiddled around with some ideas abaout and i did motorize it, but felt it overcomplicated the build. But in the case of having it as a pulldown unit in the garage, as you mention, some kind of retracting would be necessary. I think some kind of spring return would work best, and I have not given up the idea on that yet

Quick Question for you... could you please let me know the manufacture (and part number if you have it) of that exact white plastic 360 mountable hose clamp you used towards the beginning of your build? I have been looking for these things for a while! thanks in advance. CH

@bellevuesnekkeri

8 жыл бұрын

Hi Christian. I am not sure what fitting you mean. Could you supply me with the timestamp in the video, and I will look into it

@netpixels

8 жыл бұрын

+Bellevue Woodshop timestamp @ about 2:55

@bellevuesnekkeri

8 жыл бұрын

Di you mean the white clamp holding the black hose? The one with the click latch on the top?

@netpixels

8 жыл бұрын

+Bellevue Woodshop yup

@bellevuesnekkeri

8 жыл бұрын

I think i bought the in a local hardware store here in Norway. Not sure where you are located

good

КЛАССНАЯ ИДЕЯ

@bellevuesnekkeri

8 жыл бұрын

+Romich 988 большое спасибо

where did u get the hose from

@bellevuesnekkeri

4 жыл бұрын

I picked it up at the city dump. Hose from an old central vacuum cleaner

What did it cost to make this ?

Nice

@bellevuesnekkeri

Жыл бұрын

Thanks

El taller no lo había más pequeño

Where can one find that kind of vacuum hose? Brilliant idea

@bellevuesnekkeri

8 жыл бұрын

+Conrad Designs Its an old vacuum hose from a domestic central vacuum system. I found it at the dump

@djrudy1977

6 жыл бұрын

Catholic Woodworker u can get an 11/4 hose at a swimming pool store. Various lengths

@Fredengle

3 ай бұрын

you have stated to use a swimming vaccum hose as the alternative to or poormans model to standard shop vac hose ? well than my question to you is do you find it is ok with both dust and meta shavings l as well as liquids ? thoughts please thank you !!!!

WOWWWWW !!! TY John :)

That, sir. Is frick'n in genius.

@bellevuesnekkeri

9 жыл бұрын

bigjuicyone Thank you very much for the kind comment

You could like, put a automatic spring mechanism with a lever locking mechanism =) So when you push the lever, it will roll the hose automatically.

@bellevuesnekkeri

7 жыл бұрын

I did make a torsion spring, but it wore out to fast, A spring for an outboard start coil might do the trick

@henriquecorrea1562

7 жыл бұрын

Good luck then! =] Hope it works

How much did it cost to make ? I'm wanting to do this for my mobile detailing business

@bellevuesnekkeri

3 жыл бұрын

Just the cost of the 2 lazy susans, a couple of 90 degree pvc elbows .And some scrap plywood

What the name of 360 braket ?

@bellevuesnekkeri

4 ай бұрын

Lazy Suzan

a crank is missed to spin it, and it's a nice tool

@bellevuesnekkeri

9 жыл бұрын

abderrahmane abdoune Might even a motor!!!!

@dahmanus2002

9 жыл бұрын

why not

👏👏

what was the cost to build this?

@bellevuesnekkeri

5 жыл бұрын

I only had to pay for the 3 lazy suzans, and I guess that was aprox 8 usd a piece, the rest I had laying around

Hiya I like very much what you done there for your pipe good idear, I have a wood workshop I’m Just Searching for ideas. Can you tell me have you got your pipe attached to your Hoover please. Waiting for reply sender mark...

@bellevuesnekkeri

6 жыл бұрын

Thanks for the kind feedback Mark. I use a large shop vac connected to this hose

Very clever! It just needs a handle to turn it.

@bellevuesnekkeri

8 жыл бұрын

+Thomas Thomsen Thank you Thomas.I thought about, but have not found it necessary yet

@ThomasT1976

8 жыл бұрын

Ok :-).

Great DIY project but just a suggestion that you might want to move your fluorescent lighting away from it-You’ll end up with glass all over your worktable

@bellevuesnekkeri

3 жыл бұрын

Its in the danger zone, but no accidents this far😄👍

Did I miss what the swivel cuff looks like? That's what makes this thing work or not. Is the "lobe" action mechanical or "air resistance"? I think this thing is great. Everyone seems to want something for nothing, and begrudge you doing the hard part of the project for them. Did you notice they all say I "can" or I "could" this? That means they don't have one, didn't think of it, and want it for $1. You sell them the CAD & kit, they'll make 3, sell 2, and STILL be out $75 after NOT paying themselves for their time, or their use of their CNC @ $125/hr. Give the guy who thinks this stuff up the money & be happy. You could have shown the "pockets" a bit better; the comment about end grain didn't notice them, nor did I.

Got plans for this?

@bellevuesnekkeri

7 жыл бұрын

Sorry Tony, no plans for this

Link for vacuum hose?

@bellevuesnekkeri

5 жыл бұрын

Its a 30 foot hose for a central vacuum cleaner i picked up from the dumpster.

What's the hose? Looks like a corrugated corrugated wire

@bellevuesnekkeri

3 жыл бұрын

It is an old hose from a central vacuum cleaner👍😀