Homemade plastic welding | how to plastic welding at home
Жүктеу.....
Пікірлер: 81
@pauloinventostube75332 жыл бұрын
Ótimo trabalho 👏 sucesso aí família 🤜🤛
@mr.kumpuni7868
2 жыл бұрын
Thank you so much sir. God bless you and your family.. Thank you for appreciating my homemade plastic welder
@guibabellima4103 Жыл бұрын
Top! Congratulations✌️🙌👍🙌👏
@mr.kumpuni7868
Жыл бұрын
Thank you so much
@faridkaddour510 Жыл бұрын
Super idées😊
@irvinbolinas218510 ай бұрын
Can i use laptop power supply? Output 19v=3.42A 65w?
@mr.kumpuni7868
10 ай бұрын
Yes sir. You can use laptop power supply sir but you must use nichrome wire for staples because nichrome wire is very easy to heat.
@irvinbolinas2185
10 ай бұрын
Also if I may ask what is the best size for the nichrome wire? Wil 0.5 be okay?
@alexansouzaАй бұрын
Um milhão de likes.
@mr.kumpuni7868
5 күн бұрын
Thank you so much sir
@raflisaputra6706 Жыл бұрын
can i use input:100-240 volts~50/60 Hz 0.35 A with output: 12V = 1.0A-·+
@mr.kumpuni7868
Жыл бұрын
You must used high ampere power supply sir. You can use computer power supply sir and it really works good
@raflisaputra6706
Жыл бұрын
@@mr.kumpuni7868 but this power cable belongs to the wifi router modem bro, still doesn't work?
@juice.berryy2 жыл бұрын
Nice work
@mr.kumpuni7868
2 жыл бұрын
Thank you so much.. Please like and subscribe
@nityanandabhusal77392 жыл бұрын
12 voltage howmane amp sir power sapli springs how mane watt whech spring
@amdaniwijaya8250 Жыл бұрын
Thanks for video. Are you sure that it uses ordinary steel wire? Will it not cause a short circuit and damage the adapter?
@mr.kumpuni7868
Жыл бұрын
On this video im using an ordinary wire.. You can use nichrome wire from an old hair dryer and you can use computer power supply for 12volts power supply sir.
@halildemir
5 ай бұрын
@@mr.kumpuni7868The computer does not have a power source, it protects itself
@mr.kumpuni7868
5 ай бұрын
@@halildemir just extend the wire of the 12volts output.. Extend the yellow wire and the black wire 2 meters so it will not turn off.
@mr.kumpuni7868
5 ай бұрын
@@halildemir I have other video using computer power supply for plastic welding
@haykalmadina Жыл бұрын
Bang kok saya malah nyetrum ya pas lagi masang mata las nya padahal belum di on kan , posisi saya bikinnya langsung ke kabel gak pake adaptor charger, apa ngaruh?
@daverayman8865 Жыл бұрын
I like that alot mate thanks 😊
@mr.kumpuni7868
Жыл бұрын
Thank you so much sir..
@poopornrangsarit26487 ай бұрын
i done exactly the same u do but it doesn"t work. The wire not even hot.
@DonAntoniodetucum2 жыл бұрын
Need a supply of tungsten wire, have you tried other type wire?
@mr.kumpuni7868
2 жыл бұрын
Hmnn.. I also tried an ordinary wire and it also works good.. I need to make a new homemade plastic welding because one of my friend need this tool for his motorcycle shop.. Is tungsten wire is good for this homemade plastic welding sir?
@DonAntoniodetucum
2 жыл бұрын
@@mr.kumpuni7868 what you are using is tungsten heater wire. Which has a high resistance and high temperature tolerance before melting. Iron wire would melt unless the current is precisely controlled. Good luck.
@mr.kumpuni7868
2 жыл бұрын
Im also using nichrome wire that i got from and old hair dryer sir.. I use computer power supply to get 12volts power supply sir.. Thank you so much sir..
@DonAntoniodetucum
2 жыл бұрын
@@mr.kumpuni7868 you could use any type of wire if you heat it up with a torch., stainless, copper or aluminum wouldn’t rust like iron or steel
@wilfrednepales3663 Жыл бұрын
Good day sir gumawa po ako nang ganyan pero ung 12v 2amper nd kaya painitin anu kaya problema? Ung nicrome wire ko nabili ko shopee 0.8 ung size matulungan mo po sana ako salamat...
@christianonates9612 Жыл бұрын
Can you use ordanary wire
@mr.kumpuni7868
Жыл бұрын
Yes sir. You can also use an ordinary wire but you need a power supply with a higher ampere sir.
@rico3384ut2 жыл бұрын
Boss, ung ginamit mo bang switch ay 12Volts , 2 amps ? Salamat
@mr.kumpuni7868
2 жыл бұрын
Opo boss.. 12volts po kasi ang ginamit ko na power supply boss..
@UliTechMobile2 жыл бұрын
Nice one though
@UliTechMobile
2 жыл бұрын
kzread.info/dash/bejne/pJdlpMasotGWhJc.html
@mr.kumpuni7868
Жыл бұрын
Thank you so much for watching sir
@paultrimble93902 жыл бұрын
Watch I like it going make one fix 4wheeler fenders. Thanks. I’m subscribing I’ll be watching more videos as soon as fix my 4 wheeler. Lol. Thanks again from your ole hillbilly buddy stay safe.
@irwanariyanto88352 жыл бұрын
Pakek kawat apaan itu yg atas bang
@mr.kumpuni7868
2 жыл бұрын
Thank you so much for watching. Please like and subscribe..
@faragleflegi84492 жыл бұрын
how much voltage and how many amps? THX
@mr.kumpuni7868
2 жыл бұрын
I used 2 amps power supply. Its a transformer power supply but if you use computer power supply supply is much better.
@givano8854
2 жыл бұрын
@@mr.kumpuni7868 I have a power supply from computer but when I try to turn it on suddenly the current breaks off automatically. How to solve that problem? Thanks you
@wilfrednepales3663
Жыл бұрын
Good day sir gumawa po ako nang ganyan pero ung 12v 2amper nd kaya painitin anu kaya problema? Ung nicrome wire ko nabili ko shopee 0.8 ung size matulungan mo po sana ako salamat...
@mamustaq5737
5 күн бұрын
Can I use safety paper pins
@bryanangeloadanzo40942 жыл бұрын
Namamatay po yung ilaw ng 12v adapter ko kapag inoon ko na yung switch tapos hindi umiinit yung wire. Kapag iooff ko na ulit yung switch, iilaw na ulit yung adapter ko. Ano pong adapter po ba need kong gamitin? 12v dc po ginamit ko
@mr.kumpuni7868
2 жыл бұрын
Baka hindi transformer type ang ginamit nyo na power supply or adaptor sir. Mas maganda po na power supply nalang po ng computer ang gagamitin nyo. Yong yellow at black kasi 12volts ito.. Dugtungan nyolang po ng mas malaking wire ang yellow at black na wire sire. Kasi yan na kasi ang ginagamit ko na power supply sa plastic welding ko..
@felipeandresvelizalvarado52312 жыл бұрын
How many amps is the transformer?  How many amps is the transformer?
@mr.kumpuni7868
2 жыл бұрын
I used 2 amps power supply. But if you use computer power supply is much better
@francismdeleon24082 жыл бұрын
Pwdi po kaya jan ung alambre? 🤔
@mr.kumpuni7868
2 жыл бұрын
Pwede naman po. Nasubukan kunapo yan sa isang plastic welder ko kailangan lang na mas makapal na copper wire ang gagamitin nyo sa switch at sa power supply
@edjiedelarosa9343 Жыл бұрын
Sir goodDay Magkano Mo bebenta.ung ganyan or possible ba magpagawa nyan sayo salamat
@mr.kumpuni7868
Жыл бұрын
Saan po sa inyo sir? Pwede kopo gawan kayo. Pwede din po nyo ito gayahin. Mas maganda po gamitin ang power supply ng computer sir at mas matibay..
@edjiedelarosa9343
Жыл бұрын
Sir Ano fb mo Message kta Pasig Po ako
@elasticghar58952 жыл бұрын
Charger jo hai 12 volt ka hai sir.
@mr.kumpuni7868
2 жыл бұрын
I used charger or 12volts adaptor but you can use a computer power supply and it really works much better..
@nityanandabhusal77392 жыл бұрын
This charger how mane voltage
@mr.kumpuni7868
2 жыл бұрын
I use 12volts power supply.. In my other video. I used computer power supply..
@adolfohdez31
2 жыл бұрын
So is it DC power?.. or AC ?
@giseljohnpantaleo3642 Жыл бұрын
Sir pwde po b 14v?
@mr.kumpuni7868
Жыл бұрын
Pweding pwede po boss basta mataas ang ampere nito pero mas maganda gamitin ang power supply ng computer boss may isa akong video na power supply ng computer ang ginamit ko
@francismdeleon24082 жыл бұрын
Anu poba gamit mong wire?
@mr.kumpuni7868
2 жыл бұрын
Ang gamit ko pong wireay galing sa mga sirang hair dyer kasi ito ang nagkakasya sa butas ng blind rivets po
@khalidelkattan6205
2 жыл бұрын
@@mr.kumpuni7868 لو سمحت يعني استخدم اي نوع من الأسلاك ولو سمحت وضح أنا من مصر فهمني
@marizdelossantos300 Жыл бұрын
Boss bakit ayaw gumana son 12v Ilan amp ba ang kailangan ayaw niya uminit
@mr.kumpuni7868
Жыл бұрын
2 amps po ang gamit ko na adaptor pero mas maganda parin gamitin ang power supply ng computer.. Katulad sa video. Power supply po ng computer ang ginamit ko at ang wire na ginamit ko po ay nichrome wire na nanggaling sa mga sirang hairdryer po.
@pablorodriguez-tt9qh2 жыл бұрын
Que grosor o espesor de alambre admite
@mr.kumpuni7868
2 жыл бұрын
I use thin wire. Its depends on you power supply. If you use higher ampere you can use thicker wire. I use chrome wire that i got from a hair dryer because my power supply is 2 amperes
@mhozacmhazic77692 жыл бұрын
Not practical .., looking for nickelin wire more expensive than making the tool.
@mr.kumpuni7868
2 жыл бұрын
You can also use nichrome wire sir from an old hair dryer. If you have higher amp power supply, you can use ticker wire
@usmanmulaitjin1536 Жыл бұрын
Kok tidak panas buatan saya,,apa ada yg salah
@haykalmadina
Жыл бұрын
Udah ketemu masalahnya gan?
@didiksuryadi16852 жыл бұрын
Saya coba buat kok nggak paanas sama sekali.
@23_satriapangestu28
2 жыл бұрын
Sama bang😂
@mr.kumpuni7868
Жыл бұрын
It really works sir. Used the yellow and black wire of the computer power supply sir because it has 12volts output with higher amps and used nichrome wire from an old hairdyer sir.
@cleopatrakabirlalcompany4731 Жыл бұрын
प्लास्टिक वेल्डिंग बाहर से नही अंदरसे करनी चाहिये
@mr.kumpuni7868
Жыл бұрын
Thanks for watching mt video
@giseljohnpantaleo3642 Жыл бұрын
12v? Sir ilang ampers dapat ang powersupply?
@mr.kumpuni7868
Жыл бұрын
12volts po qng ginamit ko na power supply sir. Nasa 2amps po yan. Pwede dib po power supply ng computer ang gagamitin nyo sir kasi mas higher ang amps ng power supply ng computer. Youbg color yellow at black ang gamitin nyo.
@giseljohnpantaleo3642
Жыл бұрын
Hanggang ilang ampers ng power supply or ng computer power supply ang pwde sir?
Пікірлер: 81
Ótimo trabalho 👏 sucesso aí família 🤜🤛
@mr.kumpuni7868
2 жыл бұрын
Thank you so much sir. God bless you and your family.. Thank you for appreciating my homemade plastic welder
Top! Congratulations✌️🙌👍🙌👏
@mr.kumpuni7868
Жыл бұрын
Thank you so much
Super idées😊
Can i use laptop power supply? Output 19v=3.42A 65w?
@mr.kumpuni7868
10 ай бұрын
Yes sir. You can use laptop power supply sir but you must use nichrome wire for staples because nichrome wire is very easy to heat.
@irvinbolinas2185
10 ай бұрын
Also if I may ask what is the best size for the nichrome wire? Wil 0.5 be okay?
Um milhão de likes.
@mr.kumpuni7868
5 күн бұрын
Thank you so much sir
can i use input:100-240 volts~50/60 Hz 0.35 A with output: 12V = 1.0A-·+
@mr.kumpuni7868
Жыл бұрын
You must used high ampere power supply sir. You can use computer power supply sir and it really works good
@raflisaputra6706
Жыл бұрын
@@mr.kumpuni7868 but this power cable belongs to the wifi router modem bro, still doesn't work?
Nice work
@mr.kumpuni7868
2 жыл бұрын
Thank you so much.. Please like and subscribe
12 voltage howmane amp sir power sapli springs how mane watt whech spring
Thanks for video. Are you sure that it uses ordinary steel wire? Will it not cause a short circuit and damage the adapter?
@mr.kumpuni7868
Жыл бұрын
On this video im using an ordinary wire.. You can use nichrome wire from an old hair dryer and you can use computer power supply for 12volts power supply sir.
@halildemir
5 ай бұрын
@@mr.kumpuni7868The computer does not have a power source, it protects itself
@mr.kumpuni7868
5 ай бұрын
@@halildemir just extend the wire of the 12volts output.. Extend the yellow wire and the black wire 2 meters so it will not turn off.
@mr.kumpuni7868
5 ай бұрын
@@halildemir I have other video using computer power supply for plastic welding
Bang kok saya malah nyetrum ya pas lagi masang mata las nya padahal belum di on kan , posisi saya bikinnya langsung ke kabel gak pake adaptor charger, apa ngaruh?
I like that alot mate thanks 😊
@mr.kumpuni7868
Жыл бұрын
Thank you so much sir..
i done exactly the same u do but it doesn"t work. The wire not even hot.
Need a supply of tungsten wire, have you tried other type wire?
@mr.kumpuni7868
2 жыл бұрын
Hmnn.. I also tried an ordinary wire and it also works good.. I need to make a new homemade plastic welding because one of my friend need this tool for his motorcycle shop.. Is tungsten wire is good for this homemade plastic welding sir?
@DonAntoniodetucum
2 жыл бұрын
@@mr.kumpuni7868 what you are using is tungsten heater wire. Which has a high resistance and high temperature tolerance before melting. Iron wire would melt unless the current is precisely controlled. Good luck.
@mr.kumpuni7868
2 жыл бұрын
Im also using nichrome wire that i got from and old hair dryer sir.. I use computer power supply to get 12volts power supply sir.. Thank you so much sir..
@DonAntoniodetucum
2 жыл бұрын
@@mr.kumpuni7868 you could use any type of wire if you heat it up with a torch., stainless, copper or aluminum wouldn’t rust like iron or steel
Good day sir gumawa po ako nang ganyan pero ung 12v 2amper nd kaya painitin anu kaya problema? Ung nicrome wire ko nabili ko shopee 0.8 ung size matulungan mo po sana ako salamat...
Can you use ordanary wire
@mr.kumpuni7868
Жыл бұрын
Yes sir. You can also use an ordinary wire but you need a power supply with a higher ampere sir.
Boss, ung ginamit mo bang switch ay 12Volts , 2 amps ? Salamat
@mr.kumpuni7868
2 жыл бұрын
Opo boss.. 12volts po kasi ang ginamit ko na power supply boss..
Nice one though
@UliTechMobile
2 жыл бұрын
kzread.info/dash/bejne/pJdlpMasotGWhJc.html
@mr.kumpuni7868
Жыл бұрын
Thank you so much for watching sir
Watch I like it going make one fix 4wheeler fenders. Thanks. I’m subscribing I’ll be watching more videos as soon as fix my 4 wheeler. Lol. Thanks again from your ole hillbilly buddy stay safe.
Pakek kawat apaan itu yg atas bang
@mr.kumpuni7868
2 жыл бұрын
Thank you so much for watching. Please like and subscribe..
how much voltage and how many amps? THX
@mr.kumpuni7868
2 жыл бұрын
I used 2 amps power supply. Its a transformer power supply but if you use computer power supply supply is much better.
@givano8854
2 жыл бұрын
@@mr.kumpuni7868 I have a power supply from computer but when I try to turn it on suddenly the current breaks off automatically. How to solve that problem? Thanks you
@wilfrednepales3663
Жыл бұрын
Good day sir gumawa po ako nang ganyan pero ung 12v 2amper nd kaya painitin anu kaya problema? Ung nicrome wire ko nabili ko shopee 0.8 ung size matulungan mo po sana ako salamat...
@mamustaq5737
5 күн бұрын
Can I use safety paper pins
Namamatay po yung ilaw ng 12v adapter ko kapag inoon ko na yung switch tapos hindi umiinit yung wire. Kapag iooff ko na ulit yung switch, iilaw na ulit yung adapter ko. Ano pong adapter po ba need kong gamitin? 12v dc po ginamit ko
@mr.kumpuni7868
2 жыл бұрын
Baka hindi transformer type ang ginamit nyo na power supply or adaptor sir. Mas maganda po na power supply nalang po ng computer ang gagamitin nyo. Yong yellow at black kasi 12volts ito.. Dugtungan nyolang po ng mas malaking wire ang yellow at black na wire sire. Kasi yan na kasi ang ginagamit ko na power supply sa plastic welding ko..
How many amps is the transformer?  How many amps is the transformer?
@mr.kumpuni7868
2 жыл бұрын
I used 2 amps power supply. But if you use computer power supply is much better
Pwdi po kaya jan ung alambre? 🤔
@mr.kumpuni7868
2 жыл бұрын
Pwede naman po. Nasubukan kunapo yan sa isang plastic welder ko kailangan lang na mas makapal na copper wire ang gagamitin nyo sa switch at sa power supply
Sir goodDay Magkano Mo bebenta.ung ganyan or possible ba magpagawa nyan sayo salamat
@mr.kumpuni7868
Жыл бұрын
Saan po sa inyo sir? Pwede kopo gawan kayo. Pwede din po nyo ito gayahin. Mas maganda po gamitin ang power supply ng computer sir at mas matibay..
@edjiedelarosa9343
Жыл бұрын
Sir Ano fb mo Message kta Pasig Po ako
Charger jo hai 12 volt ka hai sir.
@mr.kumpuni7868
2 жыл бұрын
I used charger or 12volts adaptor but you can use a computer power supply and it really works much better..
This charger how mane voltage
@mr.kumpuni7868
2 жыл бұрын
I use 12volts power supply.. In my other video. I used computer power supply..
@adolfohdez31
2 жыл бұрын
So is it DC power?.. or AC ?
Sir pwde po b 14v?
@mr.kumpuni7868
Жыл бұрын
Pweding pwede po boss basta mataas ang ampere nito pero mas maganda gamitin ang power supply ng computer boss may isa akong video na power supply ng computer ang ginamit ko
Anu poba gamit mong wire?
@mr.kumpuni7868
2 жыл бұрын
Ang gamit ko pong wireay galing sa mga sirang hair dyer kasi ito ang nagkakasya sa butas ng blind rivets po
@khalidelkattan6205
2 жыл бұрын
@@mr.kumpuni7868 لو سمحت يعني استخدم اي نوع من الأسلاك ولو سمحت وضح أنا من مصر فهمني
Boss bakit ayaw gumana son 12v Ilan amp ba ang kailangan ayaw niya uminit
@mr.kumpuni7868
Жыл бұрын
2 amps po ang gamit ko na adaptor pero mas maganda parin gamitin ang power supply ng computer.. Katulad sa video. Power supply po ng computer ang ginamit ko at ang wire na ginamit ko po ay nichrome wire na nanggaling sa mga sirang hairdryer po.
Que grosor o espesor de alambre admite
@mr.kumpuni7868
2 жыл бұрын
I use thin wire. Its depends on you power supply. If you use higher ampere you can use thicker wire. I use chrome wire that i got from a hair dryer because my power supply is 2 amperes
Not practical .., looking for nickelin wire more expensive than making the tool.
@mr.kumpuni7868
2 жыл бұрын
You can also use nichrome wire sir from an old hair dryer. If you have higher amp power supply, you can use ticker wire
Kok tidak panas buatan saya,,apa ada yg salah
@haykalmadina
Жыл бұрын
Udah ketemu masalahnya gan?
Saya coba buat kok nggak paanas sama sekali.
@23_satriapangestu28
2 жыл бұрын
Sama bang😂
@mr.kumpuni7868
Жыл бұрын
It really works sir. Used the yellow and black wire of the computer power supply sir because it has 12volts output with higher amps and used nichrome wire from an old hairdyer sir.
प्लास्टिक वेल्डिंग बाहर से नही अंदरसे करनी चाहिये
@mr.kumpuni7868
Жыл бұрын
Thanks for watching mt video
12v? Sir ilang ampers dapat ang powersupply?
@mr.kumpuni7868
Жыл бұрын
12volts po qng ginamit ko na power supply sir. Nasa 2amps po yan. Pwede dib po power supply ng computer ang gagamitin nyo sir kasi mas higher ang amps ng power supply ng computer. Youbg color yellow at black ang gamitin nyo.
@giseljohnpantaleo3642
Жыл бұрын
Hanggang ilang ampers ng power supply or ng computer power supply ang pwde sir?