I’m impressed honestly. People can pick it apart all they want but that shit is cool

@Phantom-lb7mu

6 жыл бұрын

Thank you, yes stirling engines are very cool:)

@Phantom-lb7mu

5 жыл бұрын

Check out my other video. Working on a how to video now.

@FlatlandMando

5 жыл бұрын

Yes, that's what I thought.

@LangoUsDavidLango

5 жыл бұрын

@@Phantom-lb7mu I noticed that long stem extension of the crank wasn't on camera. Was someone grasping the turning shaft in their fingers? Is that why it kept slowing down? These Stirling engines have 'no' power, so I bet my guess is close!

@BobbyB910

5 жыл бұрын

Phantom 1080 how does it run I’m perplexed

So that’s what my upper neighbors are doing every night!

@monishmeher3901

5 жыл бұрын

😂😂shitty 2am tales

@Sayakuun

5 жыл бұрын

That's pretty damn fast 🙄

@deplorableb.r.4211

5 жыл бұрын

No, he's checking his dipstick.

@RG-xr2rc

5 жыл бұрын

Hahahhaa you killled it!!!

@donrutter6765

5 жыл бұрын

LOL

That’s like 50 hamster power 😱😱

@crimsontide9532

5 жыл бұрын

On grain alcohol she gets 64

@macgyverjenkins1869

5 жыл бұрын

That’s funny as shit

@yvonneortiz754

5 жыл бұрын

And 100 rpms

@LB-om8st

4 жыл бұрын

How much hamster power is equivalent to 1 horsepower?

@MrAcorn911

4 жыл бұрын

@@LB-om8st I need to know for ummm.... science purposes. Its important!

I want a step by step this would be dope to make

@Alfred..E..Neuman

5 жыл бұрын

Ah, yes...You'd have to be a real stoner to make an epic thing like this!! √

@pointlessopinion611

5 жыл бұрын

@@Alfred..E..Neuman Dope* Stoner

@radiergummi9602

4 жыл бұрын

@@pointlessopinion611 qq

@robbiefrentz9427

4 жыл бұрын

R K I resemble that remark. But ya I’d love to make one also

@IfGodWereEvilHedBeMe

4 жыл бұрын

Would be a cool project to do with your kid

I love this no bearings, not balanced, shaking all over the floor and sounding exceedingly great! this made me grin real big in appreciation!!! thanks for the video,

@southerngamer3146

5 жыл бұрын

Just imagine then if you took this design to another level. Bearings, a smooth flywheel, something to lubricate it while it's running, some better type of pistons slightly heavier duty rods, and a centralised heating system? It would be cool as hell

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

@kaedeschulz5422

5 жыл бұрын

A friend's volvo penta 1cylinder diesel boat sounds like that LoL

@f67739

5 жыл бұрын

this is the kind of content youtube was made for, finally recommended me something cool

@iplaygames4431

5 жыл бұрын

Just like my car

This is amazing, but i think you should get the fly wheel checked out before that engine goes into a car

@MHal312

5 жыл бұрын

American Panzer looks like a pizza stone lol

@ripdiptatterchip3851

5 жыл бұрын

American Panzer this couldn’t go in a car

@chevy2061

5 жыл бұрын

More like a crank pulley lol

@americanpanzer4163

5 жыл бұрын

@@ripdiptatterchip3851 r/whoosh

@ripdiptatterchip3851

5 жыл бұрын

American Panzer i’m sick

1:35 When V-tec kicks in

@rowdygaragee

4 жыл бұрын

Nathan Collins 😂😂 true asf

@crispyclubbers

4 жыл бұрын

B-tec

@sed8181

4 жыл бұрын

It makes more torque than a honda

@medic173

4 жыл бұрын

Hahaha

@Karmy.

4 жыл бұрын

Rod knock

Add a sticker, 5+ horse power

@phatmanxxxl

4 жыл бұрын

NOS cans, +10 hp

@juippi420

4 жыл бұрын

Breaks strattorn engine 3 horse power

@GrahamStw

4 жыл бұрын

Or paint it red. +10bhp.

@nathanielluke2084

4 жыл бұрын

_Adds Williams sticker_ (-28 hp)

@bdeyebdeye1465

4 жыл бұрын

Step 1. Locate a pistol. Step 2. Make sure pistol is loaded. Step 3. Suck start pistol.

Too bad he didn't use tomatoe juice cans. Then it'd be a V8, in line 3 cyl. All sorts of confusion

@ethanqs7633

5 жыл бұрын

How could it be a v8 and a 3 cylinder..?

@tjn360

5 жыл бұрын

@@ethanqs7633 V8 the tomato juice.

@TheFlanBot

5 жыл бұрын

Should have had a V8.

@jcMarcell

5 жыл бұрын

That's what I said 😂

@timbuchanan7481

5 жыл бұрын

Hahaa

I can barely make a paper airplane and this dude is making car engines out of beer cans lol

@124mun

5 жыл бұрын

He probably cant make one either tho lool

@leafboy3967

5 жыл бұрын

@@124mun But... he did

@squidward752

5 жыл бұрын

@@leafboy3967 but.. A car engine ISNT A STIRLING ENGINE.

@absolutcabbagery3661

5 жыл бұрын

This is actually a certain kind if swedish submarine engine actually

@leafboy3967

5 жыл бұрын

@@124mun oh i thought you were talking about a Stirling engine

"Hold my beer" goes to the next level.

@coryburns1905

4 жыл бұрын

But how do you harness energy from it

I have the materials to make a v24 in the fridge.

@thatonenigeriansformula

4 жыл бұрын

Easy 300hp

@huberttherock1956

4 жыл бұрын

oh no

The person who made that crankshaft, certainly deserve the heartiest congratulations . I wonder how he made it? What ever he did, it required good thinking and patience.

@extractorfan2143

5 жыл бұрын

Indeed it is beautiful

@rthomas6564

5 жыл бұрын

Looks like he or she or it bent a piece of wire with a pair of pliers

@sbfguy7793

5 жыл бұрын

@@rthomas6564 😂 Ikr

@Phantom-lb7mu

5 жыл бұрын

It certainly did take some planning but essentially it was just bent to the right shape with pliers on the kitchen counter. Thank you for watching :-)

@sbfguy7793

5 жыл бұрын

@@Phantom-lb7mu Simple yet effective as hell... Love it!

If you can get that flywheel balanced, you'll really put that thing over the top. BTW, your crankshaft gets two thumbs up.

@Phantom-lb7mu

5 жыл бұрын

Thanks for the comment. Crankshaft many hours with a pair of pliers! Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

@carvinlambert6899

5 жыл бұрын

me two!! crankshaft kicks Ass!!

@jonahcottrell2879

5 жыл бұрын

@@Phantom-lb7mu holy crap pliers??? You've really lost your marbles hahaha

@JohnRodriguesPhotographer

5 жыл бұрын

@@Phantom-lb7mu maybe a 4th cylinder to improve balance as well? I noticed a few instances where the engine increases and decreases in speed. Do you know what causes that?

@tadghf6891

5 жыл бұрын

@@JohnRodriguesPhotographer crankshaft position sensor

Imagine someone bringing this at the school science fare

@sed8181

4 жыл бұрын

Junayd A.A it would still lose to the baking soda volcano.

@sed8181

4 жыл бұрын

@@smartjunayd yep for sure

@mod91Kauai

4 жыл бұрын

@@sed8181 lol

My car's engine sounded just like that shortly before it self destructed.

We need a tutorial on how to build that! That's genius

@AddisonLarson

5 жыл бұрын

Its fake. Like those perpetual motion videos.

@mabals

5 жыл бұрын

This isn’t fake, it’s an engine that runs of heat, you can literally buy them online

@Wertyhappy27

5 жыл бұрын

@@AddisonLarson perpetual machines are real, unless im thinking of the wrong thing

@chasekruse7047

5 жыл бұрын

@@Wertyhappy27 This is real, its just a normal combustikn engine. perpetual motion machines are fake, and break several laws of physics.

@oliverhahnel2430

5 жыл бұрын

@@Wertyhappy27 no they're not, perpetual machines are those things you start and they'll never stop - - > not possible

Thank you for the nice comments. Yes stirling engines are very cool indeed:) this one was destroying the displacer pistons as it ran which is why it speeds up and slows down. Probably why it may to some look like it’s fake. Really no need to fake a Stirling engine video as pop can stirling engines are actually quite easy to get running. Reliability is the main issue. Currently working on a V12 version using the same type of beer cans:)

@hesperides8280

6 жыл бұрын

Phantom 1080 if you can reinforce the rod holding the flywheel and make the flywheel run true, it will run more efficiently and break down less

@user-cs3zs6jn1d

5 жыл бұрын

Same, the fly wheel needs to be balanced. It would run better for a longer period of time

@travisjohnson3620

5 жыл бұрын

What is used for fuel?

@anim8ted923

5 жыл бұрын

@@travisjohnson3620 Looks like 3 small candles.

@travisjohnson3620

5 жыл бұрын

@ Kevin Thorp yes candles ignighting what kind of fuel though? Even if it's steam.

*Can* it be done? *Yes it's a floor cylinder* *Just needs an adjustment to the can shaft*

@bigbore4498

4 жыл бұрын

This comment should have more likes.

@trashbandit2449

4 жыл бұрын

:( these puns hurt me

@Dataclysm

4 жыл бұрын

@@trashbandit2449 😂

Youre like the Professor on Gilligans Island - makin radios with coconuts and such.

It actually sounds meaner than a lot of 4 cylinder street cars I've heard driving by with big mufflers on them.

@MichaelBCooper

5 жыл бұрын

That's because the engine is uncovered

@AmericanThunder

5 жыл бұрын

@@MichaelBCooper It was.. humor. If you uncovered a 4 cylinder with a loud muffler, it would still sound like a ... 4 cylinder with a loud muffler. lol

@MichaelBCooper

5 жыл бұрын

@@AmericanThunder you have to forgive me, I'm not really a big car guy. I didn't get either joke haha

@grantjones4862

5 жыл бұрын

I don’t get it? Not to try and make you sound dumb or anything but you do realize mufflers make them quieter right?

@92boostedaccord49

5 жыл бұрын

@@grantjones4862 Oh trust me, your statement doesn't make HIM sound dumb.😂 By mufflers he meant exhaust, he is insulting all the little civics that drive around with 3 inch straight pipes.

Actual footage of from the Land Rover / Jaguar engine assembly line

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

@papascabs2767

4 жыл бұрын

Comment made my morning...lol

@johnburton8601

4 жыл бұрын

🤣🤣🤣🤣

@txtamaman

4 жыл бұрын

🤣🤣🤣🤣

@agbeats1687

4 жыл бұрын

Piss offf😂😂

1:36 sounds like an actual engine starting up.

@jmcaes32112

4 жыл бұрын

Enigma it is an actual engine??? Lol what

@berthold64

4 жыл бұрын

Bruh

@DeeDeckerOfficial

4 жыл бұрын

It is. Lol

@moabt.frican7163

4 жыл бұрын

I'm the 69th like, dudes

1:02 I had a poker face but that just made me smile

Make a giant one with kegs !

@feliperodea8316

5 жыл бұрын

A diesel type engine

@jm036

5 жыл бұрын

I wonder if he could combine 2 of them to make a flat 6 stirling engine

@Maxumized

5 жыл бұрын

Let’s drink to that 🍻

@niteshades_promise

5 жыл бұрын

D H instead of horse power should be rated in keg power!🍻

@theeoddments960

5 жыл бұрын

Arvid xd no he’s talking about a flat 6 engine. Why would you know about the old flathead sixes and not the flat 6? Porsche? Some Subaru’s? Tucker? He’s talking about a flat 6.

With 6 cans, would it be a V6 engine or a Sixpack engine?

@Phantom-lb7mu

5 жыл бұрын

Good question lol. Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

@theeoddments960

5 жыл бұрын

Six pack is the number of carburetor barrels on a mopar engine. Not cylinders. So v6.

@kreynolds1123

5 жыл бұрын

More like an inline or strait 6 cylindar engine. With the V designation for an engine, the cylinders and pistons are aligned, in two separate planes or 'banks', so that they appear as a "V"

@theeoddments960

5 жыл бұрын

Keith Reynolds yes but six pack isn’t an engine layout just number of carbs

@kreynolds1123

5 жыл бұрын

6 pack does refer to the number of barrels in a carburator. Nonapplicable with stirling engines. :D

Would be interesting with four 55 gallon drums.

@michelangelosghost2707

5 жыл бұрын

Would definitely sound good

@QueerOkie

5 жыл бұрын

You could power a yacht with that!!

@gamerguy9066

5 жыл бұрын

It would be loud as all hell

@bobbymontenegro3149

4 жыл бұрын

gamer guy but well worth the try!

@gamerguy9066

4 жыл бұрын

@@bobbymontenegro3149 It would be fun as well!

Me: "Just another day of quarantine" Me: **Opens KZread** KZread: "Ay! You wanna watch a home made VTEC?" Me: "OK."

Yes the diaphragms were a bit loose. Also the shaft was very unbalanced and after a few more runs the vibration destroyed the displacer pistons. I was quite surprised it ran at all really:)

@Phantom-lb7mu

5 жыл бұрын

I am working on a how to video at the moment.

Has a slight valve tap. I’d try some Lucas oil xD

@graveyardrumblers

5 жыл бұрын

Motorkote lol

@scratchsupper5883

5 жыл бұрын

Now this is what I like about people with tact. You make a very intelligent dig on it that can be taken whimsically, instead of the normal folks who just spout gibberish.

@Gribbo9999

5 жыл бұрын

Redex top cylinder lubricant should work a treat.

I'm glad it's in my recommend section.

This is one of the coolest videos I've seen on KZread.

I had a Stirling engine that ran on a [hot] coffee cup. No power to speak of, but cute. Three cylinders plus flame heat sure makes a difference.

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

MacGyver's truck breaks down and he's stuck in with no transport...he sees some beer cans and wire in the trunk.

@finharms9439

5 жыл бұрын

Taqveem Khalid trucks dont have trunks

@taqveem

5 жыл бұрын

@@finharms9439 kzread.info/dash/bejne/oqymmKhtcsmfeMY.html 🖕

@kurtfranklyn3019

5 жыл бұрын

And after 20 minutes of emptying the cans properly, ..the rest is history

@toptube8986

4 жыл бұрын

Steven seagull helped

@callidaria8772

4 жыл бұрын

Thousand Times every day in Russia

No one of the people who commented realize it's not regular engine. It's Stirling engine operated by the temperature difference and not by internal combustion. This was my graduation project from university!

@Kitteh.B

4 жыл бұрын

Could you explain why the speed was fluctuating? I'm guessing it had something to do with the temperature rising as it warmed up?

@80goal

4 жыл бұрын

@@Kitteh.B That engine is based on dt (temperature difference). The higher the difference the higher the power. Power is the product of torque and rotational speed. The speed fluctuation was because the temperature is not fully distributed yet on the hot cylinder, it's like the engine is warming so it's not producing it's full power

@Kitteh.B

4 жыл бұрын

@@80goal awesome, thank you!

Hahaha this man literally has made audible horsepower from tin cans haha I don’t know if I can top that kind of creativity 😂

I’ve been getting into cars over the past couple of years, saved up and got an LS400 for dirt cheap and my favorite thing about it so far is the engine believe it or not. Seeing things like this make me happy because it shows you can literally make anything on any scale if you want, this is amazing!

@chapekfabrication2975

4 жыл бұрын

1uz engine is awesome. I have one in my sandrail.

Still faster than a Civic

@casimirobuenabista

5 жыл бұрын

Hahahaha i drive a civic still funny. 😆

@ARaven-xf2lg

5 жыл бұрын

I flipped a Civic on it's side in a snow storm, and I drove it for four years after it didn't even nock out the alinement!!! It did look like a beat up beer can....

@lilskeet185

5 жыл бұрын

My grandma's ez scoot has a better 60 foot then a built K. She hit 1.4 last weekend.

@MrGreatness412

5 жыл бұрын

I have a civic too and thinking about this swap...😂😂🤣🤣😂

@RamonPatrique

5 жыл бұрын

My civic beats any of your cars

This is the second coolest thing I've seen this week! Great job!

@jackiec498

4 жыл бұрын

Link to the 1st coolest?? And please tell me it's on pornhub....

Imagine if the wheel was perfectly round.. And the "armature" was straight.. It would run very smooth.

I love the precision flywheel. I was fully expecting the whole thing to shake itself apart.

Just imagine if you made this 150 yrs ago

@chimpchowder5774

5 жыл бұрын

Luis Rodriguez they had them then! This is old technology. We never really employed it because the internal combustion engine was so much more superior when it came to power

@dontask8979

5 жыл бұрын

Yes because humans lived in caves WAY BACK THEN. Ever hear of a train?

@BlunderMunchkin

5 жыл бұрын

Stirling invented his first heat engine in 1816, over 200 years ago. So building one of these 150 years ago would have been no big deal.

@GENESISISRAEL-bk5gs

5 жыл бұрын

@@BlunderMunchkin pretty sure it was a joke...lighten up

@BlunderMunchkin

5 жыл бұрын

@@GENESISISRAEL-bk5gs Pretty sure I wasn't being snippy or sarcastic at all. Just presenting the facts, because on the internet you never know if someone doesn't know something and presenting the info can be helpful.

That sounds like a deisel tractor music to my ears

Hey bud next you should show us how to build one. That be awesome especially since we have nothing to do during this Covid-19.

awesome work!! but that fly wheels scares me xD

@Phantom-lb7mu

6 жыл бұрын

Ha, cheers yes I just threw it on there last thing. Probably doesn’t need a fly wheel being multi cylinder. Cheers for commenting:)

@obsidian9998

5 жыл бұрын

It's going plaid XD

@glockamole7128

5 жыл бұрын

@@obsidian9998 lulz

People who say your a filthy drunk "Ay check out what this drunk can do."

@sharronneedles6721

5 жыл бұрын

Ive went through the entire comment section and no onee has said that, are you just looking for something to bitch about?

@CattleRustlerOCN

5 жыл бұрын

Hold my beer…

@sickbailey21

5 жыл бұрын

@@sharronneedles6721 who is bitching?

Nobody: KZread recommended : ay you wanna see this dude make an engine with beer cans?

@IrisGalaxis

4 жыл бұрын

Yeee

@imjustbawn

4 жыл бұрын

On jah this is cool tho

@yamingoat

4 жыл бұрын

Hell fuckin yeah I want to see an engine made out of beer cans

I can only imagine how hard it was to pull that crankshaft off.

@way2sh0rt07grad

4 жыл бұрын

Taylor Rutter I meant bending it to shape

U pretty much have a BMW I8 now

@mateuszb.4011

5 жыл бұрын

Danish Ajanee too bad i8 has got an internal combustion engine

@not_herobrine3752

5 жыл бұрын

@@mateuszb.4011 *medieval/steampunk edition

@mateuszb.4011

5 жыл бұрын

not_ herobrine I don't think internal combustion engines are dying

@DanishAjanee

5 жыл бұрын

@@mateuszb.4011 They better not in my lifetime!

@TheRealBleach

5 жыл бұрын

@@mateuszb.4011 Its a joke because the BMW i8s engine was ripped out of a Mini Cooper

You've done it. You've created a sterling engine that produces practical levels of output energy. This is pretty insane, considering heat can come from a very wide variety of sources as opposed to simply fossil fuels, which is where the majority of our energy comes from now

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

This is pretty freaking cool. Awesome little build.

Would love to see a tutorial on how to make this. Awesome project to do with my 13 year old. Can't wait to see what the future holds for your channel.

This is what us men do when we're bored in our garages. I love it

Excellent. . When it picked up speed it was on another level. . Now stick a turbo on it 👍🤪👌

@Phantom-lb7mu

5 жыл бұрын

I am working on a how to build video soon. Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

@savagesock3598

5 жыл бұрын

You cant turbo this lol

this is excellent - greetings from Minnesota

Christian Koenigsegg saw this video and had an idea... Amazing video!!! Thanks for sharing!!!

1:33 sweet cam bro

@CattleRustlerOCN

5 жыл бұрын

crankshaft. Cam shafts open valve lifters normally. There's no cam on this engine

@MississippiMudMX

5 жыл бұрын

CattleRustler it was sarcasm dude. It was loping so I was making a joke

@SuperLocochicken

5 жыл бұрын

She got a cam in er'

@MississippiMudMX

5 жыл бұрын

Tyler Chavez cars and cameras reference?

@bc454irocz89

5 жыл бұрын

Yea it's cammed out bro

I am working on one right now to power my margarita blender.

That's really cool mate, peace and love to you take care bro, some people aren't going to like it.

It's completely crazy! Thanks for sharing

Sounds better than alot of cars lmao

@victorpelini5995

5 жыл бұрын

True afff 🤩😂😂

Did anyone else think this could quite possibly be the coolest thing ever to power an RC plane

@mikebolton2388

5 жыл бұрын

No

@theeoddments960

5 жыл бұрын

Has absolutely no power and heavy. It can barely spin its own crank.

Cool how it's got the old school V8 sound nice work

That's got to be coolest dam thing i have see in a minute!!!

Gives a new meaning to driving while intoxicated.

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

This is how Honda makes their “Vtec” engines

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

@tristanbasson9256

4 жыл бұрын

It's a good joke, I don't like it, but it's good😂

@ambassador.to.Christ

4 жыл бұрын

You can tell this guy got beat by a Honda 😂

@lolinpinguin

4 жыл бұрын

Oh yeah those really die hard and incredibly reliable “Vtec” engines that go 300,000 miles plus

@squaremarco

4 жыл бұрын

LMFAO

Wow,it is the most impresive I have seen last time.

The KZread recommendation algorithms never cease to amaze me. This is pretty sweet!

That's amazing how much work (in the physics term) it is doing off of only 3 little candles. Very cool. I bet if you had a third "crank bearing" on the other side of the flywheel, it would stabilize the flywheel, and it would just purr along even more smoothly.

@Phantom-lb7mu

5 жыл бұрын

Yep definitely needs another bearing on the othe side of the flywheel:)

I was expecting something slow moving patiently.... suddenly wtf :-)

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

Wow this is a super cool project

I am absolutely fascinated by this.

In the next room Jeremy Clarkson is roaring "POWERRR"

Watch out boys, we got a runaway. Pretty cool!

@Phantom-lb7mu

5 жыл бұрын

Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

Wow this is _really_ cool. Now I want to build one.

I once had a ford ranger that sounded a lot like that.😂 Nice job dude!😎👍

This is the coolest thing I’ve seen in a while I would love to build one

Really love this video! Awesome work. That crankshaft is stunning, to say the least!

@Phantom-lb7mu

5 жыл бұрын

Thanks for watching:)

Great project! Thanks for sharing.

This was one awesome video! 👍

And i cant start my weed eater damn it

@carvinlambert6899

5 жыл бұрын

SCuba Do ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha ha. funny right there!!!!!!!!

Stirling engines that operate at atmospheric pressure with air as the working gas are cool toys but not practical for doing serious work. Folks wanting to scale this up for a car don't realize how BIG and how inefficient such an engine would be. You need high pressure and a high temperature differential with helium as the gas to get these engines to be able to handle real work.

Now that is some pro level engineering!

That thing is getting some pretty good rpms. Surprised it works so well

Damn! Now Dom and the mad scientist gotta replace the piston rings you fried!

@Phantom-lb7mu

6 жыл бұрын

Haha yes all part of the fun:)

That made me laugh when it took off, Well done!!

@Phantom-lb7mu

5 жыл бұрын

I am working on a how to build video soon. Thank you for watching this video I am glad you enjoyed it. Please subscribe to my channel, watch my other video and watch this space for more videos to come!

Engine: turns on Wheel: its time to get *funky*

This is incredible! So cool

Sounds like my old Volvo 740 right before she threw a rod.

@gus473

5 жыл бұрын

My old Jeep Grand Cherokee, at 291,089 miles! That last long slope @ 70 mph finally got 'er....

@savagesock3598

5 жыл бұрын

2003 pontiac grand prix gtp supercharged.... 350k miles... Decided to do one last pull

@Reggie-The-Dog

5 жыл бұрын

@@gus473 That same thing happened to me with a 1974 Buick, the last hill killed it and threw a rod right the hell out of the block. I got my stuff out of the car and left it there. And it was a coupe with a 455 which are quite desirable today.

@QueerOkie

5 жыл бұрын

Raymond Kitchen sounds like my Model T on a good day!

Whooooooooooah!!!!!!! You're a genius, brings a tear to my eye!

If you could use focused solar to drive this you have a truly useful little generator. Excellent piece of work.

It doesn’t even need wheels to move. Super efficient!!

Could sit and watch it all day long. !!!! excellent!!!

And the engine management light didn't come on at all. Awesome.

As an Old Navy and Merchant Marine Steam and then diesel engineer this video is badass!

I think the guy in front of me all the time in the left passing lane has one of these under the hood.

wonderful stuff, sounds like a harley and probably as reliable

@emeraldzebra9360

5 жыл бұрын

More reliable, way cheaper, and probably faster too 😂😂

@Mr_Fancypants

5 жыл бұрын

If it doesn't leak oil i'l buy it.

@emeraldzebra9360

5 жыл бұрын

@@Mr_Fancypants fuck oil, my cars not got oil problems but it's had a new turbo, couch, fly wheel, egr valve, and gear linkage! WITHOUT A CRASH! I think this is more suited to my current financial situation 😂😂

At first i was like "aww thats pretty awesome, good chugging sound" then it cranked it to 11 and said ''fuck this wheel"

Old tractor engines actually worked on this principle Like you really had to manually get the engine working Just great 💪🏼

Thats awsome dude wish i had that kind of time on my hands lol nice vid