I can't imagine a more glowing endorsement of a motor than your maniacal giggles.

@ExocagedRC

4 жыл бұрын

lol I could never play poker!!

The giggles says it all.

When the video starts off with a giggle you know it's gonna be good 👍👍👊

@ExocagedRC

4 жыл бұрын

LOL I could never play poker

Holmes makes the best motors

Your channel is always awesome , love the course and all the content.

@ExocagedRC

2 жыл бұрын

Thanks!

I can't wait until mine shows up with the brxl

Silky smooth startup.

That has made that truck amazing

A buddy of mine got me to buy a HH motor finally. I got the black and red can 8t 550 motor 5 slot. I ain't gunna lie it sounds like a big block with cherry bombs hahab especially when going slow hahha added sound makes it scale. I love HH motors now. Went from a mamba x 3800kv system to brushed again.

Awsome motor awsome video

I love how they epoxy balance 👍 so nice. I wish they they would make a serious bashing brushless motor i bet it would be amazing!

@ExocagedRC

4 жыл бұрын

He has a few long can brushless motors, I'm out of sensored motors at the moment so I may see if I can order more of his for tests and projects.

Holmes is a mad genius! 😈

@ExocagedRC

4 жыл бұрын

Yep!!

Wow. What's more awesome, having a beautiful masterpiece or getting a magnum from Mr Holmes himself? 🎂🍴

@ExocagedRC

3 жыл бұрын

I gotta say I'm happier with this combo from him than I have ever been with a brushless.

@jeremybaity7002

3 жыл бұрын

@@ExocagedRC Something about direct contact when dealing with electrical by theory is gonna out do brushless. Even a trailmaster feels better IMO. Now for speed thats a whole different ballgame

I just put in a stubby 11t magnum and holy crap!!! The most drag brake I have ever experienced! It’s top shelf for sure.

@ExocagedRC

4 жыл бұрын

awesome what did you put it in?

@linglingbraps

4 жыл бұрын

Exocaged RC a gspeed v3 element conversion! Kinda like your comp rail redcat. Nice motor for a nice chassis.

@oldblueeyes3322

3 жыл бұрын

What tooth pinion did you end up using @super Motard

@linglingbraps

3 жыл бұрын

@@oldblueeyes3322 10t pinion in a tgh 2low trans

that was the best Nasty Crawl i have ever seen.......WOW oh WOW!!!!

@ExocagedRC

4 жыл бұрын

Me too, I've NEVER completed it that easy before.

Most people would just say "drop a brushless system into it" but those people probably have never experienced the smoothness of a quality hand wound brushed motor either.

That magnum motor is just damn good I run two 16t and they are nuts

@ExocagedRC

4 жыл бұрын

I almost got the 16t, are they fast as well?

@robertdale7453

4 жыл бұрын

@@ExocagedRC I use them in a wraith 1.9 and my trx sport and they are more than enough, speed wise it's faster than my walk, and the capra has a 20t to keep that high ration in check. But that instant punch is nuts even the 20t they spin wheels

@rezzrollinrc

3 жыл бұрын

Good vid mr exo! But question is for Robert if u dnt mind srry but what is ur trx4 sport geared at spur and pinion with the magnum motor? Thxs.. keep up tha awesome wrk mr exo!!

Haven't had a brushed motor since my Trinity days Joel Johnson and such 👊🏾nice run.

@ExocagedRC

4 жыл бұрын

Joel Johnson. Wow I haven’t heard that name in many years

@mikep.9338

4 жыл бұрын

@@ExocagedRC yeah bro we had a carpet and dirt track over in cburg named dads day off in the early 90's that's where I picked up my first Traxxas it was the Sledgehammer 💪🏾

@lischultz14

3 жыл бұрын

@@mikep.9338 yeah you just dated yourself on that one. lol

@mikep.9338

3 жыл бұрын

@@lischultz14 Bahahaha ikr👍🏾👍🏾👍🏾

I love your truck..... But here in Montréal there are only a few like me that are in crawler...my gen8 is a a good compremize I have a tone of goodies....next it will run on a new motor....Thank a lot to make me decide what to buy.....

Man i need one of these in my life cuz i dont want to go brushless with my trx sport i got the 21 turn from holmes but that thing looks amazing im going tonsave my pennies

About time Joe. After you mentioned it...I was waiting on the video. Hahaha. That's just BEAUTIFUL!!! That'd make a Revolver /Puller Pro fan go back to brushed. Notice the very slight over-lap on the armatures. Quality is freaky....hence the price. Is it me or did that burst of throttle on the rocks seem like the motor overpowered the slipper? You're definitely a hell-of-a better driver than you were a few years ago...and doing it one handed. Hahaha Love your enthusiasm. Hahaha

@ExocagedRC

4 жыл бұрын

Thank you and yeah I had only hear people talk about these motors but never wanted to pay the price for it. I'm glad I did!!! Its possible it slipped the slipper, there are no springs on it, just a plastic spacer but its possible. This motor will stay in here for sure. Thanks on the driving comment, I drive a lot of trucks one handed and sometimes going from a UDR to a crawler within an hour being totally different can take a few minutes to adjust.

Wow Joe that magnum is an animal 💪💪

@ExocagedRC

4 жыл бұрын

yes sir it sure is!!

@sprather84

4 жыл бұрын

@@ExocagedRC 150 is a heafty price but seems well worth it I prefer the feel of a brushed set up over brushless I just haven't been able to bring myself to pay that much for a motor that's going to have to be rebuilt but watching this video is about to make me dig deep in my pocket 😂🤣👍💯

Nice video amigo

A grown man should never have a higher pitch giggle than a my 4 yr old daughter

What gearing would you sugest starting at. Im running trx4 sport 1.9 wheels and do all rock crawl no jumping or bashing. i run all brushless but want to build one and run brushed

I miss the thunderstorms sounds born in ok and moved to Southern California not much rain here

@ExocagedRC

4 жыл бұрын

We get it almost every day during the summer months.

Looks like I have a new motor for my new 10iii build

What esc are you running?

JRH makes some sick motors, I have a pair of his custom handwounds and they are smoooooooooth..! Skewed armatures are bitchin!!! :]

Can Holmes Hobbies Motors be used with Factory ESC like the trx4 xl5 hv

I don't compete, and I'm not into braggadocious pissing contests( I lack a fellow aficionado/friend to do so with). But if my budget allowed I'd upgrade to one of these in my Capra, or TRX-4, or Bomber(or all three) in a heartbeat. Holm's hobbies should link this video to his KZread video as well as his webpage on this particular motor.

@ExocagedRC

4 жыл бұрын

about a year ago I was all brushless or nothing, but I've found out these brushed motors are no joke!!! Truly epic motors!!

Axe with the punch setting to max I feel like will be equivalent. Love my Axe. Every HH motor I've had has kicked the bucket. Good video though Joe. MAGA 2020

Hey Exo. I have a capra 4ws stock drive train. I upgraded my esc to a qiucrun 1080. I am currently running 2.2 tires.I mainly crawl and need slow speed torque with a punch if I need it. Could you please recommend a brushed motor for me. Thank you in advance

Good morning... I've heard amazing things.... Oh baby...

Hm, kind of curious how this would do in a non solid axle vehicle with a bit less torque focused gear ratio's like say a tamiya tt02b or similar. Also watch the temperatures on that motor neo magnets don't like too much heat + it being brushed I'd imagine it would heat up quite a bit.

Should my void warranty the recommend taking theirs brushless motor apart and cleaning them when in mud or water

I was interested in this 11t Magnum for my Basecamp. I was wondering if you had and recommendations for a stock Basecamp?

Witch ESC are you using with that Magnum…?

What jack stands are those

I think maybe this might be the ticket for my TRX4 Sport over dropping $230 on a brushless 550 setup. Seems more torque and smoothness than the Axe

@ExocagedRC

4 жыл бұрын

Its awesome but I'd highly recommend the Crawmaster Pro 550 10t for the TRX truck

@jonthomas8487

4 жыл бұрын

Exocaged RC yeah I’d be interested in the difference between the Crawlmaster Pro vs. Sport 550 10T. 80% more cost for the pro

What is the best budget motor for a 8lbs rig my crawl master sport with the 1080esc dosen't have enough drag break on steep descents it doesn't roll fast but I would like more would the crawl master expert handle it better

@ExocagedRC

4 жыл бұрын

you'll need to make sure its a 550 size, obviously the better motor you can get will give more drag brake, keep in mind they all will slowly drift down no matter what brushed motor you choose. The only system that can stop smoothly and completely hold is the Hobbywing Axe.

@johnhagerman320

4 жыл бұрын

@@ExocagedRC ok that puts it more in perspective. I didn't know they would still roll and will definitely be upgrading. Thank you so much and I appreciate you actually answering my questions. Most everyone else seems to busy to help. And as soon as the world gets back to normal I plan to join as a member

Trying to get some recommendation for running the 9 turn magnum stubby in my element build. The smallest pinion size i can find is a 13 tooth 48p. Going to be running 3 and 4s. Just curious if its small enough to keep it cool our you would recommend it.

@ExocagedRC

3 жыл бұрын

With the magnum you may want a few teeth more on that.

@oldblueeyes3322

3 жыл бұрын

@@ExocagedRC maybe 15 or 16tooth?

So, what did you change gearing wise to put this in so you didn't burn up the motor? I know it's not the same gearing probably as the SCX-10III (just built, smoking 2 motors so far), but doesn't that kind of gearing (including the portal reduction) wreak havoc on these type of speedy motors?

@ExocagedRC

3 жыл бұрын

11t pinion. It’s a 5slot so it’s not as fast as you may think. I’ve got them quite warm, almost hot but they take it well.

@TRKISH324

3 жыл бұрын

@@ExocagedRC I don't mind slow, just want to use it, and not smoke motors and the esc to shut off. I have plenty of speed in my Wraith Spawn (Trailmaster Pro 3800kv/Mamba X).

Now we know who 'Mr Giggles' is. That runs so smooth with such great low rpm response and control. Did you say what ESC you paired it with?

@JustinDDavis

4 жыл бұрын

BRXL from Holmes Hobbies I believe.

@ExocagedRC

4 жыл бұрын

Yeah BRXL ESC

do you break in your motors be for installing

@ExocagedRC

4 жыл бұрын

No sir. When I had this one open you could see where it was tested so I just put in right in.

I just got online and the 11t is the only one available. Is that why you got it? I love wheel speed also so I’m not doggin you, but I am curious. I honestly want as much wheel speed as possible just because I like to move just like you do.

@ExocagedRC

4 жыл бұрын

When I ordered mine I was able to choose, I went with the 11t because I need wheelspeed from time to time and my experience with the 8t Crawlmaster Sport 550 was very good so it was an easy choice for me.

What ESC your running with this motor ?

@ExocagedRC

3 жыл бұрын

Holmes BRXL

Careful with the neo magnets, it’s easily crack and break..

@ExocagedRC

4 жыл бұрын

well I was trying to not let things smack into the can if thats what you're referring to

@HL-OOI

4 жыл бұрын

Exocaged RC ya especially when u remove the can in the vid..😁

Whare can i get that motor?

Wat size rims and tyers do you have on here

@ExocagedRC

4 жыл бұрын

1.9 beadlock wheels and 4.75" Jconcepts Landmine tires, there are links in the description to get them if you want

Does the crawlmaster magnum 11t run warmer?

@ExocagedRC

3 жыл бұрын

Yeah it does run a bit warm. Holmes will tell you it’s a competition motor and not a basher motor.

@hacksaw8988

3 жыл бұрын

Thanks for the info. Btw, how many minutes do you run your magnum?

Good replacement for a Bomber???

@ExocagedRC

3 жыл бұрын

No, not suitable for that, if you want to throw down money on a brushed motor for the bomber I'd go brushless, this motor is about $160 and for about $200 you can get a mamba X 3800kv motor and be way way better off.

How do you think this’ll work in a trx4 sport?? Since it’s a 540

@ExocagedRC

4 жыл бұрын

probably run well but I'd go with the Crawlmaster Pro 10t 550 size, $100 so its about $60 less and a better fit for the TRX

@braddahdussifyoumuss596

4 жыл бұрын

Exocaged RC about the same speed🤷🏼‍♂️

@ExocagedRC

4 жыл бұрын

Yeah about the same

Have you ever tested their revolver series?

@ExocagedRC

4 жыл бұрын

Yeah in the past, they are awesome motors but insanely loud on camera

@that1slow3.75

4 жыл бұрын

Exocaged RC sound like a bunch of pissed off bees 😂

Forgive me for this stupid question.. Does fewer "turns" give more torque?

@mattconnelly9889

4 жыл бұрын

Fewer turns means more rpm.

@joefranklin7345

4 жыл бұрын

@@mattconnelly9889 oh ok thank you very much Matt!! :)

@ExocagedRC

4 жыл бұрын

Nice answer Matt, 100% correct, also to add, fewer turns also tend to pull more amps.

@joefranklin7345

4 жыл бұрын

@@ExocagedRC Much thanks Mr. Exocage!!

Gotta see the speed on the trx4 in 2nd gear!!!!!!!!!!

hi, will i be able to run this magnum stubby motor paired with HW1080 esc?

@ExocagedRC

Жыл бұрын

Yep

@fxnvibes2761

Жыл бұрын

@@ExocagedRC okay thanks. How about the revolver v3? Can i pair it with Quicrun wp 10BL60?

Can I build a truck just like this? If so can I get some info on where a parts list

@ExocagedRC

4 жыл бұрын

Yes you sure can. All you need is a Capra kit and a chassis from spare time hobbies. Look in the description for a link to the chassis and Optimus bundle.

@mercycarpetcleaning9403

4 жыл бұрын

Exocaged RC thanks bud thanks for the info and help. Sweet build. Also how you get it to turn like that? Will the kit just happen to have a great turning radius

Will that motor fit motor fit in the scx10 iii?

@ExocagedRC

3 жыл бұрын

any 540 will bolt in, 550's may require removale of the pulley stuff at the front.

@kamyeung6607

3 жыл бұрын

how many T fit in the scx10iii?

Cant imagine the marbles required to take the new motor apart immediately.

@ExocagedRC

4 жыл бұрын

In the end it’s just parts and pieces.

What body is that and who makes it? i always loved flat fendered Willy's trucks

@ExocagedRC

4 жыл бұрын

JConcepts Creep body. There are links in the description for it

@crazylarryjr

4 жыл бұрын

@@ExocagedRC Thank you sir

What ESC??

@garyg1848

4 жыл бұрын

Got it thanks

These motors are top quality. But you'd think for the price they would put it in a little bit better of a package.

@WayneStark626

3 жыл бұрын

Exactly was just thinking that

Still out of stock! Dammmm

does anyone else make a brushed motor with those magnets ?

Don’t ya mean That’s a “383” stroker Lol Yeah. I’m a car guy. & that old

@ExocagedRC

4 жыл бұрын

Mine was a 414 stroker in a 351w block. bored and stroked with about 10-1 compression. mean little motor. The 383 is a legendary motor build for sure.

@tomlucasrccrawlers9108

4 жыл бұрын

@@ExocagedRC In my 67 Fastback I have an aluminum 351 Dark block all put together by Keith Craft at Unique Performance. They built the Eleanor Motors for Carroll Shelby. They called the motor The 427 Special. But they punched it out to 440. It was the top small block before going to an FE Bigblock on the GT500....well there were like four or five small blocks. The top two was mine with a single 950 Quickfuel carb or with four Webers. Because I wanted to run a 1970 Boss 302 Shaker Air cleaner I went with the four barrel. They had or still have a 385 series 460 stroked to 514. In all honesty I should've went with that motor. But the small block runs hard. I have a good front-to-back weight ration and it dynoed at 600hp/580tq and weighs 3100 pounds. Funny thing...horsepower isn't everything...I still love the 303/342 Stroker I put in there before the Keith motor. It matched my driving skill better and was extremely reliable...it made 430hp/430tq.

@jdsrcs8061

4 жыл бұрын

Ours was a 540 for the jet boat we had many years ago. Good (but crap in your pants) times!!! 🤣🤣🤣🤣

@Chon-c

4 жыл бұрын

Exocaged RC Lol. Lort. I couldn’t afford them big block builds. Lol. They’re a more nasty beast. Lol. If ya can afford to build them. But on another note ..Man ,That new Holmes motor sure does sound good tho. Lol Definitely unique. It’s the first time Ive saw it ran.

HOW MUCH THAT MOTOR RUN YA? -ANSWERED MY OWN QUESTION. 150$.

@ExocagedRC

4 жыл бұрын

LoL yeah not cheap

@choke666

4 жыл бұрын

@@ExocagedRC YEA LOL, NO DOUBT. I WAS QUITE SHOCKED TO SEE THE PRICE! THEY DEFINITELY HAV THAT LOW END CONTROLABILITY THO THAT BRUSHLESS CANT CONTEND WITH.

@douglaselliott8298

4 жыл бұрын

Yeah; you either need to have a serious justification or money is simply the least of your problems. For the rest of us, the $20 Traxxas Titan motors need to suffice.

It's a 396 Chevy, not 393...just sayin'.

There is no sound

@ExocagedRC

4 жыл бұрын

Silent? Really?

@ExocagedRC

4 жыл бұрын

I’ve got sound

@upgraderc8617

4 жыл бұрын

@@ExocagedRC I don't know what was going on it's working now. That motor seams amazing I might have to go buy one for my comp truck. Holmes sponsors some of the guys I compete with.

I dont understand why you would want a fast motor in a crawler. Kind of defeats the purpose