That music brought a tear to my eye.

I don’t own a hobie, but watched this either way. 😅

@qwasuae

3 жыл бұрын

So do I.

@Garcia_Familia_Adventures

3 жыл бұрын

@@qwasuae I own one now. 🤣🤙🏼

Sonho de muito caiaqueiro no Brasil um caiaque desse porte

👏👏👏

Where do I find the metal adapter plate for the tripple shot

I would be nice if you did this install with the stock hull minus the hatches you installed. I'm not going that dedicated.

Is there a certain cover plate for a mirage passport 12.0 I am trying to install a Garman stryker vivid SV transducer and it doesn’t seem to fit

Where can I find the wiring kit only. Have my battery already

Does the same video & step by steps apply to a fish finder install for the Mirage 10.5?

Any coming video explaining how is best to install the Hobie anchor trolley system on this kayak? Thanks in advance..

are these Hobie fishfinder installation kit universal? or is there a specific type for a hobie mirage passport?

Is there a video for the passport 12 r? The hole for the transducer is different.

I’m using a Lowrance Hook 2-4x what kit do I need to get

@ about 3:30, when you're making the side hole for the transducer cables, the label states a 325lbs. This is a passport 10.5' not a 12'. My question is why?

@HobieOfficial

4 жыл бұрын

Good catch! This video was filmed using a pre-production Passport 12.0. Sometimes we use stickers we have on hand to mock up the placement of production stickers. The weight capacity of the Mirage Passport 12.0 is in fact 400 LBS / 181.44 KG. The weight capacity of the Passport 10.5 is 325 LBS / 147.42 KG

Is the performance of the transducer affected due to the plastic cover? If yes, what is the expected drop in performance?

@HobieOfficial

3 жыл бұрын

We worked with Lowrance in designing the plates for our kayaks, very little is lost from the signal while the transducer is protected agains scapes on the ground. In the past we would glue the transducers to the inside of the hull and have them fire through the hull but the plate is much better and an easier installation.

@dimitriosroutsis601

3 жыл бұрын

@@HobieOfficial Thank you very much for the quick response. My transducer (GT20 Garmin) also supports the cleaview functionality (photographic image). Would that functionality work with the standard plate or should I use another plate?

@marcelosilva-od3jz

Жыл бұрын

​@@dimitriosroutsis601 ola seu garmin deu certo nelle

@dimitriosroutsis601

5 ай бұрын

@@marcelosilva-od3jz I mounted it at the side of my kayak using an arm mount transducer. I didn't install it in Hobie's hall.

Hi, I am the owner of a new Passport 12.0, and would like to know where to get that fishfinder extension pad to install the transducer with a Garmin model, the dual beam one. I can not find that part anywhere. Thanks in advance!

@HobieOfficial

4 жыл бұрын

Here's the kit that includes all the fish finder thru-hull fittings and extension tabs: 72026217 FISHFINDER FIT KIT PASSPORT 12

Can this work for the humming bird helix 5?

@christopherhobby8391

3 жыл бұрын

I have a humminbird Piranhamax 4. I’m sure it will, everybody has there other brand name fish-finder’s. Doesn’t have to be Lowrance. Just get that Passport 12 fish finder kit.

Is there a transducer plate for a Garmin Vivid striker transducer for my Mirage passport 12.0

@Krozin

Жыл бұрын

ever get this figured out? i'm looking to get striker 4 CV in mine.

@Drumguy48

Жыл бұрын

@@Krozin check out Navarre Kayak fishing they have a adapter for Garmin transducers.

@Maineriverandtide

2 ай бұрын

Have to modify the plate

Drilling sucks lol