No lever lock on it??? And, most RIGHT handed folks fish, and land fish on the RIGHT side of the kayak, so you want the trolley on the LEFT side out of the way, anchor lines out of way...
@Machria23Күн бұрын
RIDICULOUS this is NOT installed from factory!!! Hobie should be ashamed of themselves.
@gettingoldsucks34122 күн бұрын
I bought a new one years ago for about 5k. wished I would’ve bought it used for half the price.
@martinbonilla35644 күн бұрын
I have a hobie mirach revolution, it uses v1 pedals, can I put this model on it, is it compatible???
@Ben_Drankin14 күн бұрын
Problem with my rudder is with the handles straight my rudder is turned at 45 degrees. I have to take both handles as far left as they go in order for the kayak to track straight in the water. To make that adjustment do I need to remove the middle screw on the half wheel in the back?
@IntegralKing19 күн бұрын
now THIS is pod racing!
@IntegralKing19 күн бұрын
what IS that thing?
@thlee320 күн бұрын
do people put motors on these?
@jacobbergren769121 күн бұрын
This shit is gay
@JohnDenver-zj7dq27 күн бұрын
what do you recommend if steering rod disconnects from handle? I've tried applying adhesive/electrical tape to no avail. Going in through the hatch to access is very difficult and even worse if you're trying to ensure a good connection is made
@JSabhАй бұрын
Lol, I am glad the patent ran out. Way too much for anything hobbo. F you.
@paulaurАй бұрын
This is just "any" stabilizer from china. Aliexpress is selling this shit
@alecharper515Ай бұрын
Clear video. Love it. Thanks for putting this together.
@donnastormer9652Ай бұрын
I just bought two of these for my revolution Il and I don’t want the bulky straps on it so I just took an old pair of socks and cut them to fit on the bottom and then I use that to slide it into the molded fitting and it is holding it perfectly tight. I wish they would’ve designed that better so that it fit in those molded holes the way the old ones do . For the price I had to pay for two of those things you would’ve thought they would’ve done a better job with that fitting ! I’ll just have to remember to replace those socks several times during the season because the saltwater will deteriorate them pretty fast.. other than that I absolutely love this for the revolution because it has no room for rails. It definitely was a game changer for me for trolling.
@cgc6761Ай бұрын
So, this video is still being recommended, in 2024, for the installation of a Lowrance Triple Shot transducer into a Hobie PA 14 360 Guardian plate…but it is no longer compatible and the parts included with my new 2023 Hobie no longer work with the Triple Shot transducer. I have the guardian plate pulled from my kayak and find the nose guard doesn’t properly cover the front of the transducer and the mounting arms will not accept the wider transducer mount. Why no update? Why no warning? Now what??? Very disappointing that Hobie does not provide the consumer a heads up.
@PartyOnGardyАй бұрын
how do the fins 'push back forward"? I have this drive and it works but I want to know, do the fins need to be full submerged in water to "push back forward"? I just replaced the set screws and Im heading out on a big trip this weekend. When I peddle out of water (just using my hands) the fins don't snap back into the engaged position. Thanks
@clinicapontes1445Ай бұрын
Where to order?
@johncoon3132Ай бұрын
Hope Hobie starts getting these back in stock! I been lookin for them for a year now!
@KevinKnox-lq9nbАй бұрын
What a beautiful sail color scheme. Love it!
@bullpuppy6892 ай бұрын
can the mega still be purchaced ????
@Kgoutdoor2 ай бұрын
- after replacing the rudder bracket mount - it snapped. It will not steer. I was trying to tighten the black line where you pull your the rudder… but for some reason my steering handles are not steering at all. I want doing circles in the river. Since buying this pro angler 12 2016 it has been an issue every time I take it out. Going on three different times taking it out. First time I got out after 2 mins. Second time i paddled with my arms because the steering does not work. So i address a broken part and it’s still not working. For this much money- why does it have so many issues?
@kpdunfee59602 ай бұрын
How do you fix tye steering mechanism onthe hobiemirageeclipsepeddleoard???? 3:56 😊😊
@achristianson40592 ай бұрын
My lowrance fs 7 elite barely picks up targets, bottoms and sides an def doesn’t work
@williamjohnson84212 ай бұрын
I need to replace my factory standing pad. Does that piece come in the kit? Is there a video on the best practices to remove the old glue?
@melissamay77782 ай бұрын
Still a little confused as to how to protect drive in shallow water .. both fins up or just one ??
@chasebroussard35322 ай бұрын
Perfect video thank you
@lhez2 ай бұрын
Can you do a video for the i11s’s rudder upgrade? Thanks
@Peterskillz2 ай бұрын
The homie Kevin! Fishy ass dude right there, that guy knows how to fish 💯
@lhez2 ай бұрын
What’s the diameter of the forward accessory mount?
@rubencampos18732 ай бұрын
YOu do not have to take the rudder line down
@manifestgtr2 ай бұрын
I’m buying one of these this season for my bass fishing…I’ve been fishing out of an old Raddison for years and it’s just not working anymore…it’s a sail if there’s any wind whatsoever. I find myself paddling/maneuvering/avoiding 50-70% of the time instead of fishing. It’s just not built for serious bass fishermen. The thing I like about it is that it’s stupid light and rooftops with no effort…this seems like it fits the bill as an updated/modern replacement for that concept…especially when it comes to fishing.
@paulduberek29912 ай бұрын
😢❤
@gregmerrill86442 ай бұрын
Does the same video & step by steps apply to a fish finder install for the Mirage 10.5?
@charlesarcher96262 ай бұрын
Thanks so much for all the clear instructions about the Hobie We use to sail and race the H16 and H22...we are now buying two of the mirage adventure kayaks...
@charlesarcher96262 ай бұрын
Thanks so much Well done.
@roblofthouse52263 ай бұрын
Can anyone tell me how long these are from mounting hole to mounting hole please? Going to retro fit them to my kayak if they're long enough.
@Hyokano3 ай бұрын
I want this so bad. I’d buy it right now but I need to make room in storage and add a mount on my car but also make my car mountable for the mounts. Too many steps in the way before I bc an get there lol
@edivaldosilvagomes40983 ай бұрын
Moro no Brasil, nao tem lojas da hobie brasil 😮
@omidriahi21473 ай бұрын
I tried many different methods but this one is the only one works. Great job
@anthonyvespia66623 ай бұрын
I love my Hobi compass. I r7n my J2 PP-768 Bixpy, the 180 drive, k8ck up fins. Allot of Hibie PA accessories I've added. Especially the gear track rails and antew other electronics. Fir myself at 5ft 7 156 lbs, i can sight fush, stand and fish, and just started my earning fly fishing for tarpon, snook, and other finesse baits. 🛶 🎣 💯
@destinsailingadventures3 ай бұрын
Will this fit Hobie aspire kayak?
@RgcobasPesca3 ай бұрын
Es un asiento increible, muy comodo, fuerte y liviano. Realmente es tan sorprendente como el sistema de pedales. El mio es 2018, y lo uso todos los fines de semana. Felicitaciones desde Argentina!
@beatrizorlandini52193 ай бұрын
Just love this ! Not found in Rio, Brazil … It rocks. I want one… Any commercial representation in the Rio de Janeiro area?
@3000KTM3 ай бұрын
on a $6000 kayak things like this should just come with it or a seat so good you don’t need it , i get you need to make money but ffs you are the the single most expensive brand , send it with the best parts
Пікірлер
No lever lock on it??? And, most RIGHT handed folks fish, and land fish on the RIGHT side of the kayak, so you want the trolley on the LEFT side out of the way, anchor lines out of way...
RIDICULOUS this is NOT installed from factory!!! Hobie should be ashamed of themselves.
I bought a new one years ago for about 5k. wished I would’ve bought it used for half the price.
I have a hobie mirach revolution, it uses v1 pedals, can I put this model on it, is it compatible???
Problem with my rudder is with the handles straight my rudder is turned at 45 degrees. I have to take both handles as far left as they go in order for the kayak to track straight in the water. To make that adjustment do I need to remove the middle screw on the half wheel in the back?
now THIS is pod racing!
what IS that thing?
do people put motors on these?
This shit is gay
what do you recommend if steering rod disconnects from handle? I've tried applying adhesive/electrical tape to no avail. Going in through the hatch to access is very difficult and even worse if you're trying to ensure a good connection is made
Lol, I am glad the patent ran out. Way too much for anything hobbo. F you.
This is just "any" stabilizer from china. Aliexpress is selling this shit
Clear video. Love it. Thanks for putting this together.
I just bought two of these for my revolution Il and I don’t want the bulky straps on it so I just took an old pair of socks and cut them to fit on the bottom and then I use that to slide it into the molded fitting and it is holding it perfectly tight. I wish they would’ve designed that better so that it fit in those molded holes the way the old ones do . For the price I had to pay for two of those things you would’ve thought they would’ve done a better job with that fitting ! I’ll just have to remember to replace those socks several times during the season because the saltwater will deteriorate them pretty fast.. other than that I absolutely love this for the revolution because it has no room for rails. It definitely was a game changer for me for trolling.
So, this video is still being recommended, in 2024, for the installation of a Lowrance Triple Shot transducer into a Hobie PA 14 360 Guardian plate…but it is no longer compatible and the parts included with my new 2023 Hobie no longer work with the Triple Shot transducer. I have the guardian plate pulled from my kayak and find the nose guard doesn’t properly cover the front of the transducer and the mounting arms will not accept the wider transducer mount. Why no update? Why no warning? Now what??? Very disappointing that Hobie does not provide the consumer a heads up.
how do the fins 'push back forward"? I have this drive and it works but I want to know, do the fins need to be full submerged in water to "push back forward"? I just replaced the set screws and Im heading out on a big trip this weekend. When I peddle out of water (just using my hands) the fins don't snap back into the engaged position. Thanks
Where to order?
Hope Hobie starts getting these back in stock! I been lookin for them for a year now!
What a beautiful sail color scheme. Love it!
can the mega still be purchaced ????
- after replacing the rudder bracket mount - it snapped. It will not steer. I was trying to tighten the black line where you pull your the rudder… but for some reason my steering handles are not steering at all. I want doing circles in the river. Since buying this pro angler 12 2016 it has been an issue every time I take it out. Going on three different times taking it out. First time I got out after 2 mins. Second time i paddled with my arms because the steering does not work. So i address a broken part and it’s still not working. For this much money- why does it have so many issues?
How do you fix tye steering mechanism onthe hobiemirageeclipsepeddleoard???? 3:56 😊😊
My lowrance fs 7 elite barely picks up targets, bottoms and sides an def doesn’t work
I need to replace my factory standing pad. Does that piece come in the kit? Is there a video on the best practices to remove the old glue?
Still a little confused as to how to protect drive in shallow water .. both fins up or just one ??
Perfect video thank you
Can you do a video for the i11s’s rudder upgrade? Thanks
The homie Kevin! Fishy ass dude right there, that guy knows how to fish 💯
What’s the diameter of the forward accessory mount?
YOu do not have to take the rudder line down
I’m buying one of these this season for my bass fishing…I’ve been fishing out of an old Raddison for years and it’s just not working anymore…it’s a sail if there’s any wind whatsoever. I find myself paddling/maneuvering/avoiding 50-70% of the time instead of fishing. It’s just not built for serious bass fishermen. The thing I like about it is that it’s stupid light and rooftops with no effort…this seems like it fits the bill as an updated/modern replacement for that concept…especially when it comes to fishing.
😢❤
Does the same video & step by steps apply to a fish finder install for the Mirage 10.5?
Thanks so much for all the clear instructions about the Hobie We use to sail and race the H16 and H22...we are now buying two of the mirage adventure kayaks...
Thanks so much Well done.
Can anyone tell me how long these are from mounting hole to mounting hole please? Going to retro fit them to my kayak if they're long enough.
I want this so bad. I’d buy it right now but I need to make room in storage and add a mount on my car but also make my car mountable for the mounts. Too many steps in the way before I bc an get there lol
Moro no Brasil, nao tem lojas da hobie brasil 😮
I tried many different methods but this one is the only one works. Great job
I love my Hobi compass. I r7n my J2 PP-768 Bixpy, the 180 drive, k8ck up fins. Allot of Hibie PA accessories I've added. Especially the gear track rails and antew other electronics. Fir myself at 5ft 7 156 lbs, i can sight fush, stand and fish, and just started my earning fly fishing for tarpon, snook, and other finesse baits. 🛶 🎣 💯
Will this fit Hobie aspire kayak?
Es un asiento increible, muy comodo, fuerte y liviano. Realmente es tan sorprendente como el sistema de pedales. El mio es 2018, y lo uso todos los fines de semana. Felicitaciones desde Argentina!
Just love this ! Not found in Rio, Brazil … It rocks. I want one… Any commercial representation in the Rio de Janeiro area?
on a $6000 kayak things like this should just come with it or a seat so good you don’t need it , i get you need to make money but ffs you are the the single most expensive brand , send it with the best parts
Just got one for $850