How to convert a Tyco US-1 dump truck into a slot car track cleaner.
Жүктеу.....
Пікірлер: 52
@hootowl21122 жыл бұрын
So oddly satisfying to see a little truck come out and drive around cleaning the course before the cars come to race. It's just like in real life, in a way.
@johnniehobby5 жыл бұрын
I'll definitely need to do this when I finally dig out my Tyco track that has been sitting in a box for at least 10 years. Sure beats using the nickel trick, the pencil eraser method, and especially the system of running a car until it stops, then pushing it across the dead spots about 100 times.
@Metal-Possum6 жыл бұрын
That's a genius idea! I always thought conventional track cleaners were a failed idea if the track was dirty, especially for those of us who only play with their slot cars on the floor once in a blue moon. Battery backup makes perfect sense, or just straight battery power.
@bell96207 жыл бұрын
Really cool demo, I'm going start building one tomorrow.
@douglaskirk25435 жыл бұрын
GREAT idea, have been doing it the hard way for many years. THANKS . . .
@sikkslotsho90247 жыл бұрын
Nice job on the track build ... & great idea on the cleaner. Going to build one now 👍🏻
@H.O.Joe26677 жыл бұрын
I got that same green dump truck.........going to build one now!
@Rahchasportstalk3 ай бұрын
Great idea👍🏾 that's ingenuity for you
@davidquick94607 жыл бұрын
Very ingenious. You could even glue wet and dry sandpaper to your pick ups and run the vehicle purely on the battery. Your idea sure would save a lot of set up time.
@NomadicSociety
6 жыл бұрын
yeah 320 grit poked threw the rear guide pin would do it quick! front pickup shoes still make contact also!
@BartBade7 жыл бұрын
I tried a lot of things but this is a great idea. Thank you👍
@filmtajm356 жыл бұрын
Very cool indeed! Thank you for sharing!
@42lookc6 жыл бұрын
Great idea and nicely done. Subscribed.
@kenchall65034 жыл бұрын
You have an awesome track layout.
@mojopitdog Жыл бұрын
Beautiful track man love it!!! Great job
@bobmears17045 жыл бұрын
Built this setup. Great idea! Works fantastic! Thanks!
@fulltiltspeedways
5 жыл бұрын
Glad you like it Bob.
@N-Scale6 жыл бұрын
I am not a slot car guy but used to be and this is a great video. Mike
@thehooverfamily95894 жыл бұрын
Amazing idea! Thanks for sharing. HO Slot Car Racing 2020
@CClub-cj8vp2 жыл бұрын
World's first hybrid slot car! Cool!
@HarryWechslerMR7 жыл бұрын
Good Idea, good Information..cool Project..!!
@ronniemoorer84482 жыл бұрын
Great idea!! Gonna make one simular to yours. Thanks for posting!#
@nigelpez5056 Жыл бұрын
I use a micro scalextric car to keep the track clean, they have steel brushes for contacts and scrub the track as the go 👍
@WR3ND6 жыл бұрын
I like it. Maybe you could even use a 9V NiMH rechargeable and use the track to keep it topped off.
@Bluddphart5 жыл бұрын
Kevin, I just found this vid and because of it I've just subbed. Awesome tip! I've got several complete in the box tracks including the one with this and the rest of the trucks. I don't yet have a place to set everything I have up but until and when I do I'll be referencing your channel sir. I'll be looking through your archive and watching what vids you have on this subject! Thanx,....Fred
@fulltiltspeedways
5 жыл бұрын
Thanks Fred!
@Bluddphart
5 жыл бұрын
No worries.
@paulfabyanic3 жыл бұрын
Pretty slick
@markod19772 жыл бұрын
Great idea
@ChrisRubeo3 жыл бұрын
Briliant.
@28axekilla4 жыл бұрын
I like your power supply I was wondering how to do connect that to the track or make it work in other words
@brickchamp41994 жыл бұрын
Hey Kevin, nice, practical way to clean the track. How many laps does it take to get the track clean like yours?
@shawsgarage3635
4 жыл бұрын
Brickchamp it depends on how dirty and oxidized the track is to begin with. I would say 10 laps or less usually
@bertsbug7 жыл бұрын
sweet
@craigmonteforte14784 жыл бұрын
Cool
@jurgenihlau40527 жыл бұрын
Are you able to write down, what you have done with the truck. I did not understand, what you are talking about. THX!
@_SamUSA_2 жыл бұрын
Is that an alkaline 9V battery? If so, when the voltage from the track is higher than the battery, you will be charging the battery as you mentioned. Charging an alkaline battery can result in leaks or even explosions. If you use a rechargeable 9V battery, that may be safer, but you still have the possibility of over charging without a BMS chip.
@derrickgates427 жыл бұрын
genius
@JaredBathurst5 жыл бұрын
Cool idea!! Too bad you can’t have the truck tow a nickel on a weight to clean it even more. Or maybe the weight will slow it down. Just a thought.
@JasonTylerRicci3 жыл бұрын
I have an older Artin slot car track that uses brushed cars. It's assembled and the rails are quite dirty/rusty. Can I clean them using this method?
@shawsgarage3635
3 жыл бұрын
Possibly. It would be worth a try.
@rcreviews98947 жыл бұрын
I got a question that's totally off subject hope you don't mind but what kind of track is that and where can i buy one of these sets like carrera , afx or scalextric they are so hard to find!!! You can only find them online like ebay and amazon and they are just the basic sets not the high end ones as far as in stores and hobby shops they don't exist!!! Did they go out of business or what ???
@sikkslotsho9024
7 жыл бұрын
Ben Pyka Try your local Hobby Lobby .... They sell CARRERA set 1/43rd and track extensions 👍🏻
@NomadicSociety
6 жыл бұрын
there are so many local hometown hobby shops that sell on ebay with buy it now prices on huge sets!
@shakorasharp1796 жыл бұрын
Make me two
@cal-tana29772 жыл бұрын
Where are you located at?
@jveronica8127 жыл бұрын
Battery go boom lol
@WR3ND
6 жыл бұрын
Internal resistance on alkaline batteries is pretty high. I'm sure you're probably fine at 9V or maybe even 10V. You could even run the track a little lower than 9V and just let the battery find equilibrium. Either way, alkaline batteries are notorious for leaking and ruining stuff. Not sure if they make a 9V NiMH off hand, but that might be a better option.
@tinanielsen17253 жыл бұрын
Can I buy this somewhere?
@shawsgarage3635
3 жыл бұрын
I don’t think so. You will have to build one.
@stanlee22002 жыл бұрын
what used to be? so sad
@SLOTCARZBYMATTHEW7 жыл бұрын
THATS COOL I LIKE YOUR IDEA I USE THE SAME TYPE OF METHED HERE . ALSO YOU CAN USE 1000 GRIT SAND PAPER IN THE GRILL AREA ,,STICK IT BETWEEN THE GRILL AND PICKUP SHOE AREA AND MAKE IT ROUNDED OUT FRONT UNDER THE GRILL AND IT WILL PUSH THE SAND PAPER IN FRONT OF IT AND SAND THE TRACK NO PROBLEMS , I LIKE YOUR VIDEOS MAN . IF YOU HAVE A MIN OR TWO CHECK OUT MY HO SLOT CAR VIDEOS OF THE COOLEST CARS AND FASEST TRACK IN THE SOUTH FL.
Пікірлер: 52
So oddly satisfying to see a little truck come out and drive around cleaning the course before the cars come to race. It's just like in real life, in a way.
I'll definitely need to do this when I finally dig out my Tyco track that has been sitting in a box for at least 10 years. Sure beats using the nickel trick, the pencil eraser method, and especially the system of running a car until it stops, then pushing it across the dead spots about 100 times.
That's a genius idea! I always thought conventional track cleaners were a failed idea if the track was dirty, especially for those of us who only play with their slot cars on the floor once in a blue moon. Battery backup makes perfect sense, or just straight battery power.
Really cool demo, I'm going start building one tomorrow.
GREAT idea, have been doing it the hard way for many years. THANKS . . .
Nice job on the track build ... & great idea on the cleaner. Going to build one now 👍🏻
I got that same green dump truck.........going to build one now!
Great idea👍🏾 that's ingenuity for you
Very ingenious. You could even glue wet and dry sandpaper to your pick ups and run the vehicle purely on the battery. Your idea sure would save a lot of set up time.
@NomadicSociety
6 жыл бұрын
yeah 320 grit poked threw the rear guide pin would do it quick! front pickup shoes still make contact also!
I tried a lot of things but this is a great idea. Thank you👍
Very cool indeed! Thank you for sharing!
Great idea and nicely done. Subscribed.
You have an awesome track layout.
Beautiful track man love it!!! Great job
Built this setup. Great idea! Works fantastic! Thanks!
@fulltiltspeedways
5 жыл бұрын
Glad you like it Bob.
I am not a slot car guy but used to be and this is a great video. Mike
Amazing idea! Thanks for sharing. HO Slot Car Racing 2020
World's first hybrid slot car! Cool!
Good Idea, good Information..cool Project..!!
Great idea!! Gonna make one simular to yours. Thanks for posting!#
I use a micro scalextric car to keep the track clean, they have steel brushes for contacts and scrub the track as the go 👍
I like it. Maybe you could even use a 9V NiMH rechargeable and use the track to keep it topped off.
Kevin, I just found this vid and because of it I've just subbed. Awesome tip! I've got several complete in the box tracks including the one with this and the rest of the trucks. I don't yet have a place to set everything I have up but until and when I do I'll be referencing your channel sir. I'll be looking through your archive and watching what vids you have on this subject! Thanx,....Fred
@fulltiltspeedways
5 жыл бұрын
Thanks Fred!
@Bluddphart
5 жыл бұрын
No worries.
Pretty slick
Great idea
Briliant.
I like your power supply I was wondering how to do connect that to the track or make it work in other words
Hey Kevin, nice, practical way to clean the track. How many laps does it take to get the track clean like yours?
@shawsgarage3635
4 жыл бұрын
Brickchamp it depends on how dirty and oxidized the track is to begin with. I would say 10 laps or less usually
sweet
Cool
Are you able to write down, what you have done with the truck. I did not understand, what you are talking about. THX!
Is that an alkaline 9V battery? If so, when the voltage from the track is higher than the battery, you will be charging the battery as you mentioned. Charging an alkaline battery can result in leaks or even explosions. If you use a rechargeable 9V battery, that may be safer, but you still have the possibility of over charging without a BMS chip.
genius
Cool idea!! Too bad you can’t have the truck tow a nickel on a weight to clean it even more. Or maybe the weight will slow it down. Just a thought.
I have an older Artin slot car track that uses brushed cars. It's assembled and the rails are quite dirty/rusty. Can I clean them using this method?
@shawsgarage3635
3 жыл бұрын
Possibly. It would be worth a try.
I got a question that's totally off subject hope you don't mind but what kind of track is that and where can i buy one of these sets like carrera , afx or scalextric they are so hard to find!!! You can only find them online like ebay and amazon and they are just the basic sets not the high end ones as far as in stores and hobby shops they don't exist!!! Did they go out of business or what ???
@sikkslotsho9024
7 жыл бұрын
Ben Pyka Try your local Hobby Lobby .... They sell CARRERA set 1/43rd and track extensions 👍🏻
@NomadicSociety
6 жыл бұрын
there are so many local hometown hobby shops that sell on ebay with buy it now prices on huge sets!
Make me two
Where are you located at?
Battery go boom lol
@WR3ND
6 жыл бұрын
Internal resistance on alkaline batteries is pretty high. I'm sure you're probably fine at 9V or maybe even 10V. You could even run the track a little lower than 9V and just let the battery find equilibrium. Either way, alkaline batteries are notorious for leaking and ruining stuff. Not sure if they make a 9V NiMH off hand, but that might be a better option.
Can I buy this somewhere?
@shawsgarage3635
3 жыл бұрын
I don’t think so. You will have to build one.
what used to be? so sad
THATS COOL I LIKE YOUR IDEA I USE THE SAME TYPE OF METHED HERE . ALSO YOU CAN USE 1000 GRIT SAND PAPER IN THE GRILL AREA ,,STICK IT BETWEEN THE GRILL AND PICKUP SHOE AREA AND MAKE IT ROUNDED OUT FRONT UNDER THE GRILL AND IT WILL PUSH THE SAND PAPER IN FRONT OF IT AND SAND THE TRACK NO PROBLEMS , I LIKE YOUR VIDEOS MAN . IF YOU HAVE A MIN OR TWO CHECK OUT MY HO SLOT CAR VIDEOS OF THE COOLEST CARS AND FASEST TRACK IN THE SOUTH FL.