God Bless you, best instruction, i was configuring two mast and two door stations, i couldnt get the masters to talk then i saw your post. Thanks.

How can I remove the call id 1-1-1

Hello there! In this video and others, i dont see any of the videos showing how it is wired up, so my question is, how do you wire up ds-kis603-p with 2nd extension screen of ds-kh6320-wte1? Do i need a poe junction box? I have 2 power adapters from kis603 kit and im planning to connect the indoor station direct to my router using poe cable. I just couldnt find any further info elsewhere...

@securityproducthelper2971

3 жыл бұрын

It just need a normal POE Switch to power up and connection.

Hi! Do you have a SIP configuration and Hikvision DVR setup online camera preview?

@securityproducthelper2971

3 жыл бұрын

Nope, haven’t available yet

I have a DS-KIS603-S set and a second indoor station connected to the first via WiFi. The second one has an icon that it has connected, but there is no video preview. Where could the cause be?

@securityproducthelper2971

3 жыл бұрын

It might be firmware issue, kindly look for Hik local support to get latest firmware of all ur model, cause I encounter this before. I upgraded the firmware and it work well.

Without wifi i can use it or wifi must??

hello, but is it necessary to buy the monitor? can it only be used with smartphones? thank you

@securityproducthelper2971

3 жыл бұрын

this need come with set during configuration. IF looking door bell with HIK Apps, I suggest take this model, kindly contact ur home country for this "KB6403-WIP"

@SteeIT

3 жыл бұрын

@@securityproducthelper2971 thankyou! unfortunately this is in wifi not in lan cable

In vdp kv6113 after connecting door sensor, where do we get the door staus and where do we configure the same.

@securityproducthelper2971

5 ай бұрын

i believe it on ivms-4200 to know the door status due sensor. I believe it on Monitoring (under iVMS-4200)

hi ur video is really useful but I cant seem to reset my extension and set the wizard / ip

@securityproducthelper2971

8 ай бұрын

if extension have problem. better all uprade to latest firmware, Please get the firmware from www.hikvision.com/

i can connect to nvr this thank you

@securityproducthelper2971

3 жыл бұрын

ROKET Ali yes, u can and tested fine. My suggestion, better just do as what they design as intercom will do.

How i will I know my ip address or where to get it from

@securityproducthelper2971

2 жыл бұрын

If u connected to your own network, u can check on ur router or u network adapter at your computer.

How can i reset the admin password which i forgot. Guide me through it please

@securityproducthelper2971

3 жыл бұрын

This u required to get “xml file” from SADP(u can download it from Hik vision website directly). However, the file need sent to Hik Vision Support to process on it, kindly looking Hik Vision Support or Service Center in ur country will do. After that they will generate another xml file, so u can change the admin password.