I just wanted to mention that this option is also available in GeForce settings > General > Image scaling, and does it to Only to games, not windows itself.

@josueaguilar1563

2 жыл бұрын

Thank you

@themusketeer9458

2 жыл бұрын

How does it work? I use it and have green nis, but no more fps.. do i have to also reduce res in game? I have it at 4k and the nis is green, it was blue when i used it on windows aswell, because i needed to reduce res in game for it to start. Is it the same here? It's weird because you set the res in geforce, but it doesnt seem to do anything

@zZiL341yRj736

2 жыл бұрын

I rather turn it one in GeForce Experience

@FreedomBU

2 жыл бұрын

I’m pretty sure if you turn it on in GeForce experience it turns it on in control panel, the only extra benefit with GeForce experience is that now you can optimize the game settings with that specific 85%/77%/ect image scaled resolution without entering the game to change the settings yourself. Tho sometimes the optimizations in experience is not as nice as optimizing game settings manually.

@FreedomBU

2 жыл бұрын

@JackTyler if your windows is its native resolution, like with my setup how one monitor is native 1440p and the other is native 4k, it will only image scale the monitor not running its native. Kinda sucks cause I run most of my games in borderless mode and I wish I could use image scaling on just the borderless games without fucking up my desktop config on both my monitors.

I understand that NIS is an open-source project, it is normal that it has problems, hopefully the community can also help together with those of Nvidia.

@rick_takahashi

2 жыл бұрын

NIS was made to sell DLSS. I think it's crap - implementation is utter crap. FSR and XeSS will be the best open source solutions.

@ProtoType4588

2 жыл бұрын

​@@rick_takahashi even if that would be true...they need to be implemented in the game by a developer while nis doesn't need to be implemented by any developer it just works straight away nis can be implemented by devs to make it perform even better dlss on the other hand you know why it works better right? while fsr and nis just is a smart pixel scaler they lack the information of the objects in the render they upscale the hole thing meanwhile dlss can ai upscale and knows the objects in the scene and can work with that data to adjust the pixel priority on say like text in some cases dlss can even look better then native like in cyberpunk 2077 the text is way clearer with dlss then it is native dlss is way more complex then fsr or nis and to put it clear once again dlss needs to be implemented meaning there is no way nis can sell dlss if the feature isn't being implemented in every game out there if anything dlss support and fsr support might decrease due to nis since why implement a feature that already has a driver base solution?

@rick_takahashi

2 жыл бұрын

@@ProtoType4588 Hence why I said poor implementation.. imagine, actually manually setting your resolution lower for it to work and actually thinking this is "a good solution". There's a setting in GeForce Experience but you still have to manually set it. FSR and NIS are spatial scaling and clearly one has better implementation whilst the other one has better "marketing" and current mindshare doesn't even help distinguish how lackluster it is.. see BF2042 with NIS. FSR can be implemented globally, see MagPie. DLSS is a blackbox approach. It is better in quality no doubt but because of its proprietary approach and the amount of work developers has to do for it to work.. I don't think it will be a sustainable solution (same as G-Sync, which even Nvidia has adopted the AMD's open-source Freesync and rebranded it as if it's their own). Intel's Open Source XeSS, which is also Temporal scaling will be a better choice for devs and I think will be long term solution unless if Nvidia does something about it (or fanboys will continue to blindly follow Nvidia). Proper OpenSource solutions will ultimately be the long game here. NIS has a short vision and is only made to sell DLSS. Think about it, FSR only needs at least 2 hours to bake into a game but why not integrated on most games... Nvidia's 💵💰 play huge influence. Will be interesting when Intel joins this circle early next year.

@ProtoType4588

2 жыл бұрын

@@rick_takahashi imagine actually needing to select lower resolutions for performance its the same story with normal resolutions you do it to gain fps having the feature related to a resolution slider doesn't require developer implementation tell me how could they have done it different without it being on by default with no option to change it you want a button a slider wel bad luck for you those sliders and buttons require to be coded into the interface everyway you possibly shape it there are no real other solutions then having a developer develop it into the game again nis cant sell dlss if dlss will never be implemented in older games and again not every developer even wants to bother implementing the scaling features your stuck with what developers want not what you want fanboys get that shit out of here only thing that mathers is performance i had both amd and nvidia cards i had both intel and amd processors it don't mather what their rep is performance numbers define what i pick up in my case it was a rtx 2070 super before the pandemic so prices were normal meanwhile amd offering here was over 100 euro more expensive but the best balanced card for me still is the rx 580 8 gb need to get me 1 again for backup rip it costs around 600 euro now if amd beats nvidia in performance then the next main card would be amd again simple as that that should answer your question if I'm blind or a fanboy as I'm neither but what you are my man is a amd fanboy probably got a amd card a amd processor even your ass says made by amd its either that or 2 other reason's 1 : your salty that you don't have a nvidia card to test this 2 : your part of that disgusting ignorant aholes that only likes to talk shit about technical advancement nobody is allowed to like new stuff because that's bad the only one selling dlss right now is you because with nis dlss lost a lot of its value but at least i can say thanks for letting me know magpie exists it gets added to my compatibility and game enhancement folder anyway hope one day you realize that fanboying doesn't get you anywhere and see it from the perspective of a gamer that just wants to game that doesn't give a shite what brand or manufacturer and then you realize mmm yes even if moneymaking was the reason the feature exists it still is free performance :)

@rick_takahashi

2 жыл бұрын

@@ProtoType4588 I agree with your opinion on fanboys.. I don't like fanboys and I also don't like people who are just repeating the marketing material of a certain company without independent 3rd party or their own validation; basically "parrots". Whilst we could have had a good discussion, it seems like you have come to defend Nvidia on my criticism on NIS, and instead redirect your 'attacks' to myself. This is called Ad Hominem --> and this is why I hate fanboys, they will never get into a good discussion without attacking another person because they couldn't take criticism of their favourite brand. Ironic, because you mention that you hate fanboys but couldn't even focus on the 'topic' without displacement. If you scroll up, I focused on the NIS' issue. One problem with your current argument, as well.. is that you thoerise all these things BUT you actually don't have any modern hardware, or even tested all of these features with modern hardware. These are the modern cards that I currently 'have' Gigabyte Aorus RTX 3080 Palit GameRock RTX 3080 Palit Gaming Pro RTX 3080ti EVGA RTX 3080 EVGA RTX 3070 ASUS Dual Mini RTX 3060Ti EVGA RTX 3060 MSI RX 6800XT Sapphire RX 6700 XT MSI RX 6700XT Sapphire Pulse RX 6600XT Sapphire Pulse RX 6600 Ryzen 5600X Test system Intel 12600K Test system I actually test PC hardware and validate these things on my main channel. Can you say the same thing? Or are you going to defend a company, which you probably haven't even invested stocks in.

There's a little tip here (even from Nvidia it self), do not use it directly on your windows desktop. Keep your desktop resolution at native and enable overlay indicator to see if NIS work or not. so you can enjoy the 144hz with NIS enabled Blue NIS = only sharpen Green NIS = scaling + sharpen

@BeerHunter2008

2 жыл бұрын

*Unless you play games like Halo where you can't change your resolution, then you have to change it on desktop.

@stickboy8219

2 жыл бұрын

@@BeerHunter2008 on halo my nis is only blue is that fine as I've not seen it go green yet is there anything else I need to do

@lastsonofkrypton25

2 жыл бұрын

@@stickboy8219 Go to settings in GeForce experience, and enable NIS from there and select a resolution to scale from, in the Nvidia control panel , select your native resolution, start the game and in the graphics settings, select the one you selected on the GeForce experience. That should work, you don't need to mess with windows resolution. Your resolution should be always on the recommened and in the Nvidia control panel in your monitor native as well.

@BeerHunter2008

2 жыл бұрын

@@stickboy8219 You have to change your resolution to one of the resolution nvida nis provides on desktop, it's the only way with Halo.

@mrpandazz

2 жыл бұрын

mine is red?

Thank you for the informative video! Do we have to select the new resolution options? Or can i keep mine at 4k60hz and then when i lower the resolution in game, NIS kicks in

this setting is honestly awesome

I turned it on on my gtx 1050 ti xD and my valorant graphics and fps improved ^^ the lighting in valorant looks like it has shaders even with all low settings

@raimeeee4117

2 жыл бұрын

What resolution did you set in valorant?

@lntkling8138

2 жыл бұрын

@@raimeeee4117 bruh he literally say all low at then end🥴

@raimeeee4117

2 жыл бұрын

@@lntkling8138 I said resolution i'm not saying about low settings

@ankubains1752

2 жыл бұрын

Hey how u upgrade ur standard gtx 1050ti drivers...standard ones r not updated on nvidia website since last year

With lower end GPU it scales 720p to 1080p quite nicely and makes sharp image but if using shadowplay to record gameplay it only captures at 720p even if in-game res looks like 1080p.

@furkanbayat7811

2 жыл бұрын

What sharpening % do you use?

@YoStu242

2 жыл бұрын

@@furkanbayat7811 I use 25% because default 50% was a bit too much and made me feel like I had eaten wrong kind of mushrooms lol

@gamechanger2324

2 жыл бұрын

Because it's upscaling the image and not native 1080p. If viewers use their image scaler to watch using the same settings KZread will still only be up to 720p but it will upscale your 720p video properly as intended. Sharpness is more down to personal preference.

Thanks, helped me tweak my Nvidia settings

My image scaling box in my Nvidia does not look like this, I have 2 rows or decimal boxes. Any help here? Do I need some other type of update? Thanks

Thanks for the info Bro.

For Ultrawide you gotta set a custom resolution. NIS still DOES NOT support ultrawide. My monitor is 2560x1080p so I have to make a custom 2176x918. That would be 85%. For 3440x1440 you gotta set it to 3151x1271.

Thanks For Explaining Dude

DO NOT SET NIS ON YOUR NATIVE DESKTOP! You may choose to use overlay on NIS under Nvidia Geforce Experience. NIS scaling resolution appears in your 'game' video settings for selection. Green NIS will appear at top left corner of screen when you play games with resolution change. Blue NIS for sharpening only. Sharpening does not affect your framerate - for best results use 15% to 25% for sharpen. Best returns for framerate is at 85% scaling - any lower you start to have diminishing returns because of lower resolution.

@vanshnigam6074

2 жыл бұрын

Wdym?

@whizkid4690

2 жыл бұрын

@@vanshnigam6074 In short, under Nvidia control panel -> Manage 3D settings -> enable Image Scaling to "On" -> Set sharpening to 20%. Save/Apply settings. Then under Geforce experience, go to settings -> Enable ingame overlay. set image scaling to 85% (Take note of your render resolution). Sharpening is at 20%. Launch your game. Goto your game video settings, check and select same video resolutions (same as render resolution), apply it. If all is well, NIS in green appears in top left corner of your screen. If you didnt change in game resolution, Blue NIS appears for sharpening in effect for the game. To do further adjustments, in the game , press alt-Z key to launch Geforce overlay, adjust your sharpening further according to preference, keep style at OFF. Enjoy increase FPS.

@highlanderknight

2 жыл бұрын

If I have to use Geforce Experience, I will pass...

@whizkid4690

2 жыл бұрын

@@highlanderknight You need not have to use Geforce experience, if you do not intend to adjust any settings on the fly.

@vanshnigam6074

2 жыл бұрын

@@whizkid4690 thank you sooo much,I owe you

Does Nvidia's Image Scaling from control panel work on custom resolution I created or do I need to use one of the generated resolutions by NIS?

If I understand this correctly, this is not a good option to have on for Ultrawide monitors (4330x1440), correct?

Is there a way to enable image scaling only on specific games?

think you manged to bric my gaming experince ... thx dude

i've been using this for a coupe months and i like the extra fps but its getting really frustrating to have a second-long black screen every time i tab out. Anyone have a way around this?

I updated my drivers, butni domt have this option. I dont even see any of the display options idk what to do

I can use that image shaperning in my native 1080p monitor ,like the amd image sharpening? In amd you can use image sharpening anytime without changing resolution

for fortnite would you use gsync or fixed refresh? i have 3080 ti 240hz monitor

They said that it was available in the driver for years right? How do you enable it before? What was it called before?

the last driver of my gt 740m in 2019 . why they didnt release new drivers ??

Have you done some tests with NIS enabled but inactive on native resolution? I've seen some benchmarks that shows that NIS cuts performance by around 2-3% on native resolution when it's enabled globally (even without sharpening) vs NIS disabled at native resolution.

@pandar3n459

2 жыл бұрын

it's a know buy, disable NIS on desktop, and only apply NIS in game reso

@merlinch5453

2 жыл бұрын

sadly, NIS must be enabled globally i use 1080p 144hz with that on and didn't see any performance drop at native resolution

@pandar3n459

2 жыл бұрын

@@merlinch5453 you must do it inside the geforce experience so the desktop won't be affected and only turns on with games

@merlinch5453

2 жыл бұрын

@@pandar3n459 not really, i don't install gefore experience and it still work in all of my games difference between the two is just how you control the sharpen

@pandar3n459

2 жыл бұрын

@@merlinch5453 how did u know the difference if u haven't tested it? I tested it myself and it works, different desktop resolution no sharpening and in game sharpened and upscale 100$ works and I tested it

Its really helpful with the more demanding games. Like Metro Exodus. I can set the resolution at 720p and it looks really good. However it doesnt work if im using the DX12 api since DX12 dont seem to run in true fullscreen or something.

Doesn’t work with an Oculus Rift CV1 connected to a GTX1650. Could be because it’s deemed “not VR ready” so it just doesn’t come up as an option at all even though the Oculus actually works just fine with the GTX1650. I think they are just protecting their more expensive cards?

what about 16:10 panels ? will nis work out of the box ? Is there any support planned for 16:10 ?

I have a 4K monitor in my laptop and only 4K scaling resolutions show up (not 1080p, which is the resolution I play my games at). Any idea how to fix this? I tried changing my desktop resolution to 1080p and more and NOTHING... :-(

What to do if i dont see the option for image scaling? I have gtx 950m

Hello, i have a problem on the 3D-setting part. When i hit apply after turning on the image scaling my screen turns black, it stays on for 1 second and i can see that it is used but it instantly turns black and disables it. I have been searching for a solution for a while and would like some advice solving this.

@oberon9705

2 жыл бұрын

Btw im using a laptop with an external display

@oberon9705

2 жыл бұрын

Nvm i got it working through nvidia experience

Whats best gaming resolution scaling for an ultrawide 1440p monitor when using NIS because I don't know please tell me

@stickboy8219

2 жыл бұрын

I was using 1080p and looked awesome still

For my RTX 3060, it's not available in nvidia control panel but I'm able to use it in game settings. For example Forza horizon 5

question: when streaming in obs in 1080p, while NIS is on will OBS stream what it is capturing in your game screen or the lower res that is upscaled by the NIS? ty

@beardalaxy

2 жыл бұрын

it depends on what method you use for capturing. if you use game capture, i believe it will capture the game's actual lower resolution. if you're using window or display capture, it might capture the upscaled one.

Turned it on and my gtx1650 got a nice boost on all my games. I run at 1600x900 and its set to upscale 30%. All my games got a boost. Best example my aliens fireteam game went from 1080 with all low and 50ish fps to 1600x900 upscaled all high preset and 75ish fps.

So does this cap your monitor's refresh rate at 60hz? I have a PC with GTX 1060 and a 1440p monitor.

@TroubleChute what streaming software were you using to capture this? I've been trying to troubleshoot FH5 with streaming software and I'm always getting stutter counts? I'm wondering if it's the streaming app or just something isn't optimised on an rtx 3k series card.

@yamusa85

2 жыл бұрын

Try OBS. Stuttering may occure if you use highly loaded decoder type. Try using Nvenc (gpu decoding) or x264 (cpu decoding) to compare what decoder is best for your use case.

@paulrivieras9762

2 жыл бұрын

@Jono Cooper Try CapFrameX and capture the Frames for at least 10 to 15 Minutes so your Card gets heated up enough during Gameplay. Also, depending on which Game you use it for, try to get into Heavy Scenes (Lots of Gunshot, Explosions etc...) to see how low your FPS and high your Frame Times go in those Scenes. You usually get the smoothest Experience if your lowest FPS stays above 60 FPS as anything below that will feel really stuttery, even on higher HZ Monitors.

I only get Image sharpening not scaling, then the next step is greyed out?

tbh I'm planning to go from AMD to Nvidia. I would really like to know if the cards of Nvidia don't have that many driver problems

Gforce kept my games info easier to Re D/load but stopped working jan 2022 again if i update drivers mite work i only use basic for my 2080. s

Can this be used to make lower quality video like iptv 720p look better?

Currently Noticed An FPS Diffrence In Escape From Tarkov OF At Least 13-25 FPS on .75

@CatchyNameman

2 жыл бұрын

Wow that’s awesome

@paulrivieras9762

2 жыл бұрын

Since you render roughly 25% less Pixel, you should see an increase in FPS even if you use higher Graphic Settings.

@grim2882

2 жыл бұрын

It didn’t impact my game by even a single frame. I wonder why.

@sunburntstrapon6449

2 жыл бұрын

Here aswell! Big Tarkov fan, NIS helped me gain 40% more FPS and I cant tell the difference between normal 1080p and this "upscaled" 1080p. This as said is a godsend for Geforce owners.

I gained 40 fps using this and hitting a solid 240fps in halo infinite now so its pretty damn good

@sinba.

2 жыл бұрын

How the image quality ? any considerable drop ?

@yamusa85

2 жыл бұрын

@@sinba. -It is hot and ready. -But is it good? -Hot.And.Ready.

@stickboy8219

2 жыл бұрын

@@sinba. I find its quite nice I dont notice the difference tbh

@GloomToon

2 жыл бұрын

@@stickboy8219 what gpu do you have?

@stickboy8219

2 жыл бұрын

@@GloomToon Asus tuf 3080 oc

Actually the lever on the Nvidia Control Panel, in addition to setting the sharpness in percentage, also sets the scaling. They merged the two functions. It also says above the lever itself: "GPU Scaling & Sharpening"

What is the difference between lowering the resolution to 1080p from 4k the nornal way and doing it with scaling resolution 50%?

It sems like it works differently dpeending on the monitor. I am still able to keep my native refresh rate when using NIS.

I have a GTX 1080 ti and the latest NVIDIA driver installed but dont get the scaling option in NVIDIA control panel ? Do you know why? I have my PC connected to an OLED TV and not a montior ? Thank you

Hey got a question how to keep all the settings but I want remove the nis logo on the right side of my screen it anyway

Can anyone please help me? I can't find an answer to a question I have regarding NIS. I have a top end PC that can run any game at full maxed settings with high frames but now that I've learnt about this new Nvidia feature, I'm worsening if I could benefit from it at all? Any input will be appreciated. Thanks

I'm on a nvidia geforce gtx 1070 7th gen GE63VR 7RF Raider, I don't see the display settings or image scaling in nvidia control panel (which is a laptop btw)

Hey. if i choose image scaling in my 3d setting to on and apply it - it turns intantly off. But if i turn Image scaling in my Gforce Experience settint to On it works. So i must do it via Gforce Experience ?

@FurioMil

2 жыл бұрын

I uninstalled Gforce Exp. In 3d setting it works fine

how do i get back old Image Sharpening? it worked better for me when i have to duplicate displays than new Image Scaling options for my example i have a dedicated streaming PC i'm capturing my main desktop on and without old Image Sharpening, it makes some of my games look like they're being zoomed into 4k when my main resolution is 1080p -_-

my issue is that my monitor native is 1440p but when I turn on NIS, windows always brings my monitor to 4K active signal resolution, and then downscale to whatever lower desktop resolution i set, including games. so with NIS on, NIS is detecting my active signal resolution as 4K, and going to 50% I have to set ingame as 1080p, which is pretty high and this lags my game. I have spent like 7 full days trying to solve this but in the end, it is unsolvable because it always goes to 4K when I turn on NIS, negating the benefit of NIS. same goes for DLDSR, it gave me like 6.8K and 8.6K resolutions at 1.78X and 2.25X of 4K. I have learn to just play at 1080p, and let my GPU / Display scale it to a 1440p screen.

Im running NIS for windows itselft, while windows changed refresh to 60, i just went into advanced display properties in windows and selected 120hz again and im having it all enabled all the time

Nice.. about 10% fps increase on 4K upscale is pretty good … that would mean about 60% on a regular 1080 resolution… and even more in VR

@crispinotechgaming

2 жыл бұрын

how are you supposed to get more at a lower resolution??

@iJaviXR

2 жыл бұрын

@@crispinotechgaming Because its not the same a gtx1060 trying to renderize 2k and scale it to 4k, and renderize at 720p and scaling it up to 1080p (for example). Your gtx can pretty much run much better a game at 720p than at 2k/3k.

Cant even se the option in nvidia control panel? Have tried everything. Have an 32:9 monitor (samsung G9) i dont know if its not suppored but the option should show up anyway right?

i enable this on Valorant but whenever i alt tab into desktop my screen mess up like jigsaw puzzle i dont know how to fix it.

I have three monitors connected to nvidia surround and it does not work, the badge does not appear and I cannot change the monitor resolution

Thank you very much !!!

it worked, but the next day it didn’t?! and nis text isn’t in the top left corner anymore, even though i checked my settings and my driver is updated, please help ..

04:20 I'm a little bit confused, why exactly would I want more fps if my screen gets locked on 60hz instead of 240hz I'm running it ATM?! It would still look like 60fps even If you get like 363747 isn't it ? 🧐🤔

the NIS on the top left of my screen can I take it off or it has to stay there?

Stretched resolution with NIS doesnt work for me, it just gives me black bars

it doesnt work when you use Resolution Slider in game like for example 1080p but in 95%, it only works when you change the whole resolution unfortunely, at 900p the difference is just too big

in nvidia control panel there is not image scaling but image sharpening. i updated my drivers and still have same problem

New world 1660 Super regularly get 40-60 fps depending where I am. With this I get 70-85

@SLAPI_GR

2 жыл бұрын

Make this gpu Overclock?i dont Want to burn my gtx 1660 super sorry but in New on pc

Btw, i want a talk, NVIDIA Image Scaling Is Support For Another Gaming Laptop Too?

I have had good luck with it. Pathfinder wrath of the righteous I got like a 18 fps boost reliably but in witcher three it was only an 8 fps boost so what I have found is the boost depends on the game. Baldur's Gate 3 I actually had it perform worse just to add but idk if that is because it is still in development or not. It's good but I don't understand why they just didn't make it work on anything 4k or even 1440p and lower. Having to change the resolution of an 1080p monitor just to get it to activate just seems ridiculous to me and I would say it is pointless but it did make the I think it was 1650x1050 look way better imo just sucks that you have to pay all this money for a high end monitor just to reduce the resolution for maybe a 20% boost in performance at most when the program literally will work on 1080p even 1440p as long as it is not the native resolution. Anyone else feel this way? Also I've tried to reduce the resolution lower to 1600x900 and it didn't give anymore performance then at any other lower resolutions. Idk if this is the experience all around but figured I'd state that.

so please if some one can explain this to me ,, i got 1050ti and i run fh5 on custom settings between medium and low but i don't experience that much frames drop i get like 40 to 45 i think i actually don't care because i want to play with decent graphics and i don't like it when i get fps drop ,, so when i enable this image scaling do i need to optimize my in game graphics settings? or keep it as it is

I have a nvidia mx330 card and it has latest drivers but I don't see image scaling option anywhere

i'm on a rtx 3060 omen, 17 inch 1440p laptop and i was exited to try this but any reslotion i put with sharpening and scaling enabled just looks awful so i'm not sure how this works :(

I can't see image scaling option under manage 3d settings, can anyone help? I'm using rtx 3080 laptop gpu. Thanks.

My NIS overlay isnt working. I think its upscaling but its hard to tell. Im running at 85% of 4k to save some fps so it does seem to work. But there is simply no overlay, anyone know how to fix this?

does this settings affect the whole windows settings or it will just upsclade the game?

your having problems because your changing your native res on your desktop lol. my 21:9 has no problems. You just have to use utrawide downscaling resolutions. This seems to work better than FSR or DLSS so far. Its about on par visually with performance mode for FSR but gives more frames.

Enabling this option causes programs that use hardware acceleration to display media as a flat green screen for me. The scaling is pretty good otherwise, though!

i dont have NIS/ image scaling in nvidia control panel ??? my graphique card is gtx 1660 ti

I don't know why but when I try and enable NIS it doesn't work, it refreshes my monitor and then it's on but then it does it again and turns itself off for some odd reason

i dont know why i have this problem everytime i hit enable the scaling and hit apply its always switched back to off i try enable overlay also got same result always switched back to off no error warning no anything it just went off

For me image scaling for any application (that has a fullscreen option) is grayed out. Only when global settings are turned on, then I can customize it per application. But then I am stuck at 60hz no matter what I do (in-game control panel, nvidia control panel, windows settings, highest is 60 hz). What am I missing?

Its not availaible in laptops , im using a acer predator with rtx3060 and it only says "image sharpening" but no image scaling, and yes i have all the latest drivers. plus i dont use hdr if youre gonna say turn hdr off.

i have the latest nvidia drivers and i dont have the option, idk if its because i have laptop or what. can u help?

not seeing this global option on laptop with gtx1050 4gb "card". yes software is up to date.

This doesn’t work for me my fps are the same. Desktop I’m at normal 1440 and in game I change the resolution to the recommend NIS the indicator turns green but I get same fps.

NIS is not working for me. There's a constant blue "NIS" text displayed, no matter what resolution I set. I have two screens, and I tried disconnecting one to use only the main screen, but it didn't help. The screen's native resolution is set to 1920x1080.

@K.E.A.9.4.

7 ай бұрын

There’s an option to turn the text off

Doesn't work on my laptop. Have an external monitor, it does scale image but doesn't boost my fps ☹

Can anyone tell me why i don't see the option? My system is compatible and all.

Is this for videos & games or just gaming images only?

Can somebody help me my screen resolution is 1366×768 how much sharpen should I use

Ok image scaling doesn't show up with latest driver and I have a 3090. Are you missing an Nvidia setting for image scaling to show up instead of image sharpening? Like the monitor settings in the control panel?

@user-mx2qx4rl9o

2 жыл бұрын

I dont have image scaling either on 3050 laptop

@mmhoss

2 жыл бұрын

the new cards are DLSS capable, which is way more powerful

@nickm8651

2 жыл бұрын

It's Nvidia drivers not working with certain monitors and hardware. My Samsung Neo G9 shows image scaling when monitor is set to 120 Hz but when set to 240 Hz image scaling goes back to image sharpening. I've contacted Nvidia support and they are working with me on this.

@nickm8651

2 жыл бұрын

@@bahaazamzam1529 Nvidia said they may have a solution later for the Neo G9 monitor

Can we use NIS also in VR G2 . If yes, do we need setup different parameters ? Thank you.

@poolhallshark

2 жыл бұрын

I saw your post and I have the exact same question. Have you been able to find an answer to the question elsewhere ? Greetings from Norway

@jpvanderhaegen

2 жыл бұрын

@@poolhallshark No answer at this moment, sorry

@poolhallshark

2 жыл бұрын

@@jpvanderhaegen No worries m8. Let me know when and if you know ? I'll do the same.

@saossamo419

2 жыл бұрын

following

hi, does it also work with triple monitor? Thank you

So, it's like using DLSS but without AI, right? Pretty useful for GTX but not for RTX. Am I wrong?

@misenko856

2 жыл бұрын

Not really because actually only bunch of games support DDLS

Why did you test it on both 3440x1440? You use image sharpening on lower resolutions, while having the same amount of clarity.

So that's why it's not giving me 21:9 resolutions properly. Darn it! thanks for the info , glad it's not just me.

CAN SOMEONE HELP ME?? for some reason the option for image scaling doesn't appear on my Nvidia control panel i've updated my drivers :(

@wolfkane1986

2 жыл бұрын

What gpu u have?

Hello Trouble, been fan for quite sometime. Just wanted to say you're the best at explaining stuff. Your talking manner is absolutely amazing. Anyways, I've installed latest drivers 497.09, but I do not have the Image Scaling option in my control panel. My rig is: Asus ROG Zephyrus G15 513QM with ryzen 9 5 series and rtx 3060, gotta say it's a beast of machine. But I'd like to have that NIS neat option available, cause I've just bought a 27 inch 1440p monitor, and playing on higher resolution rather than standart 1920x1080p dropped my fps a tad. (15-25) fps so yeah, any idea whats going on ? Maybe gotta enable some developer settings or something ?

@stakkd4380

2 жыл бұрын

i have a 1080p monitor plugged to my laptop closed lid and i have the same driver update 497.09 but i have a 3050, i also have a different control panel setting, my image scaling has sharpen: 0-1.0 and ignore film grain: 0-1.0, and i do not have an overlay option. p.s i now that i have an external monitor for my laptop shouldn't i have control panel display tab now? i don't but just wondering

@Flajukas

2 жыл бұрын

@@stakkd4380 i bought an external monitor aswell, no new panels appeared either, nothing with laptop screen nothing with external aswell.

If you're a laptop gamer like me and you're not getting the NIS Option in nvidia control panel, you might have to connect an external monitor to get the option. That's what worked for me . I hope this is helpful :)

@AdhiWulung

2 жыл бұрын

Thanks, i will try later

@Mirdax

2 жыл бұрын

Disable optimus

@MinymanPlays

Жыл бұрын

Thank you

When I open it, the screen refresh rate is 30fps from 60 fps to 30 fps

I have multiple monitors like you and everytime I try to use the scaling it messes up my other monitors kind of like what it did to you but it does it every single time I use it so I don't use scaling at all

@paulrivieras9762

2 жыл бұрын

Use scaling only in-game and NOT forced on the Desktop or the like. You can also sometimes edit Game Files (like config ini Files) to enter a specific Resolution only for that Game. You then would only have to enable some Sharpening perhaps, and it shouldnt affect your Monitor setup at all (I have a 4k and 1920p Monitor Side by Side and it works fine)

does this work for laptops? I can't find the 'image scaling' setting.