HICAS Delete Tutorial

Автокөліктер мен көлік құралдары

Tutorial on how to remove the full HICAS system from Nissan chassis. I try to explain everything and show how to do it rather than miss steps like other people. I wanted to keep it but under hard accelerations I can feel the rear moving around and I would rather it be in a fixed position. Although, I understand and have used the system when driving into corners!

Пікірлер: 20

  • @LNR6SPD
    @LNR6SPD3 жыл бұрын

    I have been dreading doing this to my s13. Thank you for the video man, I am going to attempt tacking it this weekend!

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    No problem!!! I love the Hicas but under more HP it starts to act up

  • @macallen6889
    @macallen6889 Жыл бұрын

    Hey bro what wire from the hicas loom did you have to earth ? I’ve just done this on my r33 GTR aswell. Your altessa video sent me here

  • @92AcuraGSR1
    @92AcuraGSR13 жыл бұрын

    Nice work

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    Thanks!!

  • @TikiTechGaming
    @TikiTechGaming3 жыл бұрын

    I used two sockets and c clamp

  • @TikiTechGaming
    @TikiTechGaming3 жыл бұрын

    Don’t forget to snip the white and green striped wire on the hicas ecu

  • @LeroyGTR

    @LeroyGTR

    3 жыл бұрын

    ? what would this help? the light coming on the dash?

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    I would like to know also and thanks for the input

  • @TikiTechGaming

    @TikiTechGaming

    3 жыл бұрын

    @@Nismology33 yes, it will cut the hicas light off. I’ll take a picture of the exact wire i cut and send it to you

  • @LeroyGTR

    @LeroyGTR

    3 жыл бұрын

    @@TikiTechGaming ahh...in the trunk...under the shelf..its the small box. I googled R33 hicas ECU...took me right to it. Yea, its a fix for the light and system all together just to cut that wire

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    @@TikiTechGaming well aren't you just a bundle of knowledge lol.. Thanks my guy 👍🏾💯💯

  • @LeroyGTR
    @LeroyGTR3 жыл бұрын

    i need all the smoke..lol i was going to ask you about this next! did you have to cap off any lines? of just a plug and play application of just the hardware. Also, any warning lights on the dash since removed?

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    The R33 and 34 are electronically controlled Hicas, whereas r32 are hydraulically. So just remove electrical connectors and I'm going to remove the Hicas bulb in the dash.

  • @LeroyGTR

    @LeroyGTR

    3 жыл бұрын

    @@Nismology33 Ahh ok. i have a tuned haltech ECU installed. not to sure if that can control hicas But, i always thought for our 33's we had to cap off some hydraulic lines...good video i just ordered my kit today

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    @@LeroyGTR no lines to cap off.. Only 32s

  • @LeroyGTR
    @LeroyGTR3 жыл бұрын

    So, did you end up cutting the green/white wire on your R33 or took out the bulb for the hicas light to shut off?

  • @Nismology33

    @Nismology33

    3 жыл бұрын

    I cut the wire

  • @LeroyGTR

    @LeroyGTR

    3 жыл бұрын

    @@Nismology33 ahh ok. I think i just took the bulb out a while ago. I did the delete and dont see a hicas light no more. Was a while ago when i just took it out (guess i forgot) good video. Had to press them bushings out was the hard part. And today i seen a front axle boot torn smh..so ill be watching your other DIY on that one. Thanks

Келесі