Just bought! Thanks for the advice and the review from Italy !!

Yeah so cool, looks like it awesome rig., awesome place to go RC heaven . Appreciate you sharing I'll keep watching for more

Please more videos like this!!!! Great video man!

Cool man nice look at it and good run with it

Great video bro 👍👍 I love Bruiser

@RunThatRC

4 жыл бұрын

I was expecting to break it but it surprisingly handled ok for a stock rig.

Oh man, thats such a nice place to drive these!

@RunThatRC

3 жыл бұрын

It really is!

Hi,My Man.I Got to Say This is one of the best Crawling Video's I have seen in a long time.look's like you have set up that Rig just sweet.My Man.I Also Love the The other Rig in the video Run's sweet as well.That's a thumb's up from me My Friend.Keep up the Good work. Alway's like you vid's.

@RunThatRC

4 жыл бұрын

Thanks! I really appreciate the kind comment and your support. The other rig is a actual rock crawler turned trail truck. It's my friends Kyosho Rock Force it's a classic now and practically indestructible!

@ruflasto1

4 жыл бұрын

@@RunThatRC Thank's for the reply.Both Rig's look Cool together.Nice.

Really enjoyed this video!!

@RunThatRC

2 жыл бұрын

Glad you enjoyed it!

@JurassicJordan808

2 жыл бұрын

@@RunThatRC its funny bc after months of looking online for one under 250usd and that would not take like 3 months 2 get 2 me I had given up. Your video came up randomly and I was like let me try fb market which I don't go on for cars ever and no lie bc of ur video sparking the want for the truck again I found one... that had literally been posted while I was watching your video. I just met with the seller last night I got it and I am not let down at all. So I want you to know bc of you I now own this truck!!! So ultimately thank you!!!!

now thats what i need i love that rig

@RunThatRC

4 жыл бұрын

Everyone needs one of these! It's a cool looking rig for sure.

So cool 😎 love the way it came out . Great idea to mount the servo. Totally agree the extra cab piece looks kinda funny looks so much better with out it. Use a piece of lexan to make a back window for it.

@RunThatRC

4 жыл бұрын

I'm probably going to leave it just add a frame to make it look more normal. It's a good place to carry this heavy beast from lol.

@modelnutty6503

4 жыл бұрын

a single roll bar / light bar could be cool, agree about the triple tube look being too "out there". top mounted lights DO get wrecked in a rollover so maybe no to lights there. make a custom roll bar?

@ToyotaGuy1971

2 жыл бұрын

I rather like my Bruiser's sleeper cab. It's a late-70's - early-eighties monster truck, and that sleeper cab with the duel, off-set bubble-widows, is reminiscent of the cool custom vans that were so popular then. So they give it that little extra, fantasy-custom look of the late-70's van scene I love so much. That's also why I prefer the original utility tires; because when monster trucks were just beginning to get popular; that's what they had, so as a monster truck from the late-70's, early-80's; it's perfect, just the way they made it. Everything on it, is perfectly scaled, for what it is; big bumpers and all. You have to think of it as what it was meant to be; or you can't fully appreciate it's glory.

That location looks like a great place to trail on😲👍

@RunThatRC

3 жыл бұрын

its a great location for these and the full size stuff too. I enjoy this location.

Looks great

@RunThatRC

3 жыл бұрын

Thanks!

I gotta get one everyone seems to enjoy these. I’m still using Tamiya version. Fun video sir!✌️

@RunThatRC

3 жыл бұрын

its a fun cheaper option. I like it

he how are ya i asked you about the bruiser you were right it was the gear change servo so it is all good now thank you for helping me i really apreciate it cheers mate

@RunThatRC

3 жыл бұрын

glad it helped. Now go hit those trails!

For the price it's great. I love mine.

@RunThatRC

4 жыл бұрын

and they look awesome!

Nice video need to do a video over mine again been a while

It beautiful there

@RunThatRC

4 жыл бұрын

It is a nice place to run Rc truck for sure!

looks nice David. im almost done with mine... but we scored a used traxxas summit 1/10 newest gen with the BT transmitter,2x nimhs and charger. for 275usd Ish could pass on that deal. oure p407 i also got some Tamiya 51324 tires. light kit... and spare motor/esc kitt. Surpass Hobby Waterproof F540 3300KV supposed to be a nice little upgrade for this truck. but yeah the steering, i scratched my head when i was trying to install this......"nope, this needs modding" XD

@RunThatRC

4 жыл бұрын

Yeah I just really wanted to drive this so zip tie steering servo it is. It surprised even me how solid those zips are. Not one little movement from the servo. When I get a better drill i will drill a servo mount to that plate but I will run it like this because I think it's funny lol.

Really beautiful Toyota truck..... nice..

Nice place man!

@RunThatRC

4 жыл бұрын

It sure is!

Donate him some better and nicer wheels and tires and this thing is awesome for its money! Even the leave spring suspension works just fine 😮

Makes me want a 407

@RunThatRC

4 жыл бұрын

Its a looker. Very nostalgic

Zip ties! Excellent idea.

@RunThatRC

3 жыл бұрын

hahaha yeah it's still on there. I do have a 3d printer now so I could print a proper mount for it but these heavy duty zip ties haven't let me down! It was just a mock up of where I have seen others transfer the servo location to and its been a permanent mod for now.

@udoworner4399

3 жыл бұрын

Best idea with the zip's, i do it same.

Dats a dope rig r u goin to put a light bar on it or some other style bumpers

@RunThatRC

4 жыл бұрын

Maybe in the future. For now its going to stay this way.

really SWEET no BS steering servo mount mod right there! old school just like the Tamiya it copied and not a thing I don't like about it, while at the same time I'm thinking what the gearbox (axles too?) might do with 4 link and long travel coil overs, because a bruiser was always kinda stiff. might be aftermarket leaf springs could get it to be a little more limber? don't know so asking, is the steering servo horn long enough to get full steering lock to lock? with the drifting C-24 I did file some of the stops away at front outer carriers to get a few more degrees steering from it, can't go too much or the dog bone ends can begin binding, losing contact etc. didn't do that to WPL type crawlers, those parts seeing more torque.

@RunThatRC

4 жыл бұрын

The servo horn could probably be one or two holes longer but it's close to full lock. For my drift build im going to install the newer u joint style front hexes for more steering angle.

It would be nice if for every model you did a standard top speed test on your sidewalk or street.

@RunThatRC

4 жыл бұрын

2 high=8mph, 2 low=6mph, 4 low=4mph. This is with a 1080 hobbywing esc on 2s 5000mah lipo.

I did like you sit on the steering servo I replace the steering servo

Do the front wheels steer slowly, e.g. halfway instead of sharp left or right.

@RunThatRC

3 жыл бұрын

they are fully proportional.

Good work with the zip tie. Screwing paying so much money for a simple plastic mount.

@RunThatRC

3 жыл бұрын

I do have a 3d printer now and should have printed a mount already. It is still holding strong though lol.

Love the video 😍. Is your setup stock or modified (apart from the extra can removal) really thinking about getting it for my birthday

@RunThatRC

4 жыл бұрын

its mostly stock with the springs in the shocks removed and running only on one leaf spring on each corner(stock is 3 leafs each corner). Hobbywing 80a esc, flysky tx/rx and 2 budget 20kg servos.

@reginaa.s7773

3 жыл бұрын

@@RunThatRC hi, how do you oilfilled the shocks?

Really cool truck, does it look more scale with crawler wheel/tires instead of the stock monster truck combo? Nice video as usual 👍🏾

@RunThatRC

4 жыл бұрын

They would look more scale with like a 1.9 tire and wheel combo but you will need an adapter to use other wheels. I will try to do mods to this in the future.

@3TRCGarage

4 жыл бұрын

It’s really cool how your channel has gotten so popular. Your content has alway been really good but your filming, editing, builds and reviews just keep getting better and better. 👍🏾👍🏾

@RunThatRC

4 жыл бұрын

@@3TRCGarage thanks for the kind words brother! I definitely appreciate it!

Love your videos and also the HG-P407 bought one a while ago and done some mods to it as you have done. What kind of leaf spring setup have you done? It's very hard and springy with the original setup.

@RunThatRC

4 жыл бұрын

I removed the spring in the shocks and for the leaf's I left only one leaf in rear and front. Still needs more mods for flex. But I like it the way it is. Its oldschool awesomeness!

@bengtmowitz5012

4 жыл бұрын

@@RunThatRC okay, no problems with torque distortion of the springs? I thinking of that is a big amount of torque emitted to the axles, that want to rotate the axles. I was thinking of adding the second largest spring to the inside (on top of the larger one) in order to counter measure that, what's your opinion?

@RunThatRC

4 жыл бұрын

@@bengtmowitz5012 I haven't noticed any twisting of the axles but it might be, just don't notice it. I am going to run a different setup in the future and if it's any good I will have an update video on it.

@bengtmowitz5012

4 жыл бұрын

@@RunThatRC Great, looking forward to that as always. Your thoughts and experiences are very important for the community of rc-car freaks like me 😂👌👍

May i know the model of the other truck? So much articulation, I love that!

@RunThatRC

3 жыл бұрын

the other truck is a old comp crawler. It's a Kyosho Rock Force with a proline jeep body modded onto it.

Awesome video brah! I really like the way you showed a pretty much stock truck and a built crawler going head to head! I have 2 original Bruisers so I'm a big fan!! Aloha brah! 🤙🤙🤙

@RunThatRC

4 жыл бұрын

Nice! I wish I owned a original version. I do like this "cheaper version" haha. That just means the original performs well specially for its age!

@clydem7899

4 жыл бұрын

@@RunThatRC haha! Might perform ok but parts were not made of strong matrrials. My "runner" Bruiser pretty much only uses the chassis and leaf springs. Aloha brah🤙🤙🤙🤙🤙🤙🤙

Hi, i have HG P407 too, but it's RTR version. I want to ask, can i use 3S battery with the stock ESC and Motor? If not, what should i upgrade?

@RunThatRC

3 жыл бұрын

I'm not sure what the rtr comes with for electronics but I dont really recommend this on 3s. Its a fragile truck for what it is and 3s will just lead to breakages for sure. But if you still what to give it a try like I did just take it easy and you will or may need a new 3s capable esc like the 1080 hobbywing.

Keep it as it is, keep it real. Some crawlers have articulations that are just ridiculous. Even your mates RC in this video is ridiculous. The more real it is, the more thinking you need when crawling.

@RunThatRC

4 жыл бұрын

Im probably not going to change it. I like it as is.

lol @ back when he was younger. :D

Do you believe this 1080 hobbywing esc can a the 370 motor upgrade on the WPL

@RunThatRC

3 жыл бұрын

1080 may be overkill and too hard to stuff under a wpl.

Did you have any rust issues with the axles, motor, or Bearings? None of that is sealed.

@RunThatRC

2 жыл бұрын

no rust issues so far I did spary it with penetrating oil a couple days before and dried and sprayed again after.

@Guns_N_Gears

2 жыл бұрын

@@RunThatRC 👍

What size is the shift servo in that truck?

@RunThatRC

4 жыл бұрын

Im using a 20kg servo. Same as steering servo.

need some advise, i have a brushed motor esc, can i use a 2s or 3s battery for it?

@RunThatRC

3 жыл бұрын

depends on the specs on the esc. what esc do you have?

@bryanalejandro7385

3 жыл бұрын

@@RunThatRC i have a Tamiya TEU103bk dual motor brushed esc. cant find anything on the net that says it can take a Lipo battery

I would not recommend zip tying your steering servo. It might be something that you could do for a servo winch and not really suffer the consequences on the trail but steering servo need to be bolted down

@RunThatRC

4 жыл бұрын

I normally would not do it but the way the servo sits under that metal plate and the way it is zip tied it really doesn't move even a little bit. I used heavy duty zips and have ran 6 packs through the rig already and so far it's been good. It was just originally for fitting but when I tightened the zips it was solid so I figured let's see how this holds. Just bring extra zips when I trail lol. I don't think these cheap jx servos are waterproof anyways so I do expect to break it and probably when I install a better servo I'll make a mount for it. It shouldn't be too hard.

@modelnutty6503

4 жыл бұрын

naaw, in this case the way it's secured it's not about to budge at all.

what do you recommend? having one of this? or 3 WPL KM RC? thanks

@RunThatRC

3 жыл бұрын

really depends what size rc you want. I like all scales and the small stuff is fun because it is easy to bring anywhere due to taking less space.

Here is the rear cab window part if you need one: www.ebay.com/itm/Tamiya-1-10-Toyota-Hilux-Bruiser-Mountaineer-Rear-Cab-Clear-Hard-Plastic-Window/221250371198?hash=item33838cbe7e:g:yAkAAOSwyWZZTbr9

@RunThatRC

4 жыл бұрын

nice! thanks for the info bro!

More vides like this PLZ!!!!! SUBd

@RunThatRC

2 жыл бұрын

thanks for the support!

@Guns_N_Gears

2 жыл бұрын

@@RunThatRC U betcha!

hi mate i have a new HG P407 i worked fine for a little while but now when i turn it on and run it it goes for about a minute and stops the esc and the seroo gets hot can you work that out thanks

@RunThatRC

3 жыл бұрын

Im not sure what could be going on. If the tx has adjustments maybe they need the endpoints turned down. Servos might be binding and causing the esc to cutoff from overheating. I have the kit version and provided my own electronics. I have no experience with the ready to run version unfortunately sorry.

@gregatkins5413

3 жыл бұрын

cheers mate the tx hasn't got end points i am going to return it to banggood for waranty thank you for contacting me

That keeps body is mounted to high at the end

@cobybertasso8609

4 жыл бұрын

Jeeps

@RunThatRC

4 жыл бұрын

yeah unfortunately its the lowest it can go on that crawler chassis. Its a kyosho rock force underneath.

Nice. Like the fatty tires!

The stock ESC has 2 jumper switches but no labels or information. Anyone know if one of these is to switch between LiPo and NIMH as I only have NIMH batteries.

@RunThatRC

4 жыл бұрын

if the esc has a jumper and only one jumper it is likely to be a lipo cutoff setting. you shouldn't have an issue running 7.2v nimh packs if thats the case. If you know the model of the esc you can probably search the specs on the esc.

@Veganarchy-Zetetic

4 жыл бұрын

@@RunThatRC It has 2 jumpers and I am guessing 1 jumper is for reversing the motor rotation? If so at least there is no risk of damaging anything by just playing around with the jumpers until I find the NIMH mode. I have searched everywhere and not found any information online so far. Thanks again for the replies.

@RunThatRC

4 жыл бұрын

If it has 2 jumpers. One is probably for forward back reverse or forward reverse only modes. You will know which mode your in when running it. The nimh battery will sag causing a low voltage cutoff situation. Just switch the jumper when that happens and you should be in nimh mode.

@Veganarchy-Zetetic

4 жыл бұрын

@@RunThatRC O.k thank you very much for the help. Glad I can use all these NIMH batteries I just bought as LiPo seem pretty scary.

compared to Remo Hobby 1093 ?

@RunThatRC

4 жыл бұрын

I don't have a Remo Hobby truck. But if I had to guess out the box the Remo may be a better crawler platform.

Gd

The only i hate is the body is too small they need bigger so its real scale and normal height the stock body is looks like monster truck

@RunThatRC

4 жыл бұрын

Your a youngster so I get it. But back it the 80s and 90s this was how some of these hilux trucks looked like. Specially when I lived in Hawaii. Mini monster island truck style. It looks sweet to me.

@modelnutty6503

4 жыл бұрын

David YUP, my college buddy 35+ years ago custom built his. wider chevy axles turning 35" wheels, gave up 200cc swapping out the Toyota engine in favor of a BMW putting out 60 more ponies, total beast!

I'm building one just like it my name is Robert B's wanger