No video
Harvest Right Freeze Dryer 1st Oil Change in Premier Pump
In this Video I walk through the first oil change for my Harvest Right Freeze Dryer Premier Pump.
#adventuresinfreezedrying #FreezeDryer #HarvestRight #Retiredat40
In this Video I walk through the first oil change for my Harvest Right Freeze Dryer Premier Pump.
#adventuresinfreezedrying #FreezeDryer #HarvestRight #Retiredat40
Пікірлер: 43
A little tip on the "O"ring is to put a dab of Vaseline on it to hold it in place. Tis an old mechanics trick.
@adventuresinfreezedrying
Жыл бұрын
That is a great tip!! Thank you for sharing,
LEAST complicated oil change video thus far. Thank you!!! I’ve been avoiding this for too long because I thought it would be too difficult!!
@adventuresinfreezedrying
Жыл бұрын
Thanks! All about helping everyone know and feel that they can do this too!
@Andrea-LovesYouStill
Жыл бұрын
@@adventuresinfreezedrying THANK YOUUU!!! Back to freeze drying and have done 2 huge batches after watching your video!!! 💜
Nice job. You're a good soul. Appreciate the video! Most helpful.
@adventuresinfreezedrying
9 ай бұрын
Thank you for your kind words! Thank you for watching
Mine has the same flaw. I guess I got lucky and put it on the right way as I didn't know it mattered. Thanks
@adventuresinfreezedrying
5 ай бұрын
YW! Thanks for watching
Good to see more FD videos, I subscribed, How many cycles do you get with the Premier pump, I've heard up to 25 before changing, I have an older standard pump that's good for 2-3 cycles, So thinking of investing in a Premier.
@adventuresinfreezedrying
2 жыл бұрын
Hi Tim, it was somewhere in the 20-25 range for me, I think it is based on running hours more than loads, so in the summer with higher heat and in Iowa higher humidity loads are taking longer so may not be as many loads.
Thank you for this video. I want to purchase a freeze dryer and there’s quite a bit of difference in price between the models. My question, is there a gauge on the side of the motor to show the oil level or how do you tell when you have poured enough oil? Thanks
@adventuresinfreezedrying
11 ай бұрын
There is a window on the front, however it lags behind the fill, so once you see it in the window it’s good to stop and wait a minute or two for it to catch up before continuing with the oil.
Just wondering if you've thought of putting your used/filtered oil in the freezer to remove any excess water.? It'll freeze and be removable from oil. I've seen it in the forums numerous times.
@adventuresinfreezedrying
2 жыл бұрын
I am going to stick with what Harvest Right suggests, and I think I will only reuse once based on the comments on Facebook from some engineers who know vacuum pumps.
@meganwinters5163
2 жыл бұрын
@@adventuresinfreezedrying thanks for the reply 👍 awesome I'll do that & only keep it back in true emergencies
How many times can you refilter the oil before it has to be completely replaced? How many uses do you get out of a filter, just one?
@adventuresinfreezedrying
Жыл бұрын
I have only ever filtered once…oil is cheap, a new pump is not.
Just did my first oil change on my HarvestRight premier pump. I filtered the oil with the supplied Brita style filter, but when I added the filtered oil back in, the gage on the pump never showed I added any oil back in, and it's been over 15 min! Have no idea what the issue is, and unfortunately it happened on the extended 4th of July weekend. Anyone have any ideas what's going on here?
@adventuresinfreezedrying
2 жыл бұрын
I have not had this happen yet, sorry I can’t help.
@Heb4Seven
Жыл бұрын
I see its been 2 months since you wrote this... How did it turn out? Did you call the Harvest Right helpline?
You said you just finished using your freeze dryer in the video. How many minutes did you wait until you pour the oil out? The oil must be very hot right after.
@adventuresinfreezedrying
Жыл бұрын
I let it run for about 5 minutes in the test screen where you can turn the vacuum pump on and off.
@user-qq3be3dw8w
Жыл бұрын
Thank you for your reply. I have another question to ask you. Can you use filtered oil for another 20 batches?
@adventuresinfreezedrying
Жыл бұрын
@@user-qq3be3dw8w yes you can
Does the dryer's software tell you when to change the oil (I assume you set the type of pump in the settings)? So, after you change do you have to tell the machine?
@adventuresinfreezedrying
2 жыл бұрын
Yes, the machine told me 1 time. I did one more load and it didn’t say it again… I did not put anything into the machine… my guess is it tells you every x number of hours the machine has run to change your oil.
@wlb-comments7596
2 жыл бұрын
@@adventuresinfreezedrying So.. I guess it is just a time and resets after the warning. Good to know. I have my dryer now.. but waiting for the space it to go into to setup. So frustrating to have it... yet not using it yet.
@adventuresinfreezedrying
2 жыл бұрын
That would be frustrating! I had surgery in February on my left arm, they broke it and put pins back in... (I haven't been able to use Freeze Dryer because I couldn't use my left arm and it really takes two hands to navigate) just this morning finished my newest video, Pears, where I show the screen that prompted me to do the oil change. I am finally able to bear weight on my arm so I will be getting back to freeze drying this morning and trying Morel Mushrooms...
@adventuresinfreezedrying
2 жыл бұрын
@@wlb-comments7596 hope you have been able to get set up and started! It is frustrating to have it sit and not be able to use it.
@wlb-comments7596
2 жыл бұрын
@@adventuresinfreezedrying I wish.. still waiting on the extra funds to tile and paint the room. I was almost tempted to set it all up somewhere else just to get started, but realized I just need to wait.
Hi mam may I ask, can you put the new oil together with the filtered oil? Thanks
@adventuresinfreezedrying
Жыл бұрын
I have topped off my filtered oil with a little new :)
My change oil light is still on? How do I get it off
@adventuresinfreezedrying
11 ай бұрын
Mine automatically turns off after the next load or two. If yours isn’t turning off you may want to try turning off your machine, unplugging it and let it sit a few minutes then plug back in and turn back on.
You need to clean the oil out of the dimister
@adventuresinfreezedrying
Жыл бұрын
I do not clean the demister regularly. If your pump is functioning properly it does not need cleaned every oil change.
You didn’t take the filter out and clean it
@adventuresinfreezedrying
3 ай бұрын
You don’t need to clean the demister every time…I clean mine about once per year
When using the pump does the oil level drop?
@adventuresinfreezedrying
9 ай бұрын
Yes it does drop some which is why I personally always make sure I am at least halfway between min and max, however never exceed the max or you will get oil mist.
@SeekChrist82
9 ай бұрын
@@adventuresinfreezedrying ok thank u so much.
@adventuresinfreezedrying
9 ай бұрын
@@SeekChrist82 you are welcome :)