How to remove get access replace change charge or jump start a dead battery on a 2003 2004 2005 2006 2007 2008 2009 Harley-Davidson VRod
Жүктеу.....
Пікірлер: 50
@jamess16972 жыл бұрын
the best how to mechanical video I've ever seen on you tube .. thank you so much
@choochootrayn5 жыл бұрын
I've replaced mine twice. First time was total PITA, mainly due to the rubber hold down strap. I took it off, and played hell getting it back on. The second time, I left the rubber hold down strap in place, and slid the old battery out. Was able to stretch the rubber strap over the new battery, and slide it in. Much faster and easier.
@Quinnjavi Жыл бұрын
Straight to the point and VERY helpful. Thank you!!
@happygilmore60224 жыл бұрын
Great video! Also what a great idea having the bike set up for a quicker instructional video! Thanks
@Timo12764 жыл бұрын
Thanks you! With everyone being stuck home and Harley Davidson being closed, I changed the battery myself after watching your video. Stay safe everyone.
@FlyingWheels
4 жыл бұрын
Ride safe. Keep both wheels down😁
@jdshemp
4 жыл бұрын
Is your dealer closed due to virus?
@Timo1276
4 жыл бұрын
@@jdshemp Starting today all non-essential businesses are closed. Harley-Davidson in Queens already closed shop yesterday.
@jdshemp
4 жыл бұрын
@@Timo1276 Thanks,told Boston Harley to release my bike from winter storage,hope they don't shut down.
@kenshumaker59622 жыл бұрын
You did a great job and didn't waste time with bs. Thank you
@perejosepr88025 жыл бұрын
This video is very practic, thanks a lot
@lnsvett13 жыл бұрын
Just bought a 05 vrod thanks for the great video. Thumbs up and subscribed!!!
@mylife52372 жыл бұрын
Thank you for the video. It's clear and we'll instructed.
@julianm54504 жыл бұрын
Thank you good and helpful video Changed the battery of my fathers V rod 👍🏻☺️
@JayBerckley5 жыл бұрын
Short and sweet - makes sense and was very helpful! Thanks bro-
@GreznykGaming3 жыл бұрын
Thanks man! Just changed my 2014 night rod special battery on an o’Reilly’s parking lot thanks to your video. Haha.
@dme28 Жыл бұрын
Bro, thank you very much! Done in 10 minutes.
@mellymel68863 жыл бұрын
Thank you very good video 👍
@yocramlet4 жыл бұрын
nice and easy brother. thanks
@PJCookAC-1305 жыл бұрын
On a 2008 Night Rod (maybe all 2008+?) model there is an additional 7th clip on the rear end of the Air filter cover. Just an FYI.
@420ghoul
3 жыл бұрын
On the 100AE im using theirs a 7th
@mrx-od3ji
2 жыл бұрын
2002 vrod has 7 clips
@oriondevil793 жыл бұрын
Thanks dude!
@jks23273 жыл бұрын
Good video. Thanks. 66gordo
@yusufbabacan63623 жыл бұрын
Thanks man
@alexmarois19413 жыл бұрын
Thank you
@skymiller5304 ай бұрын
WOW. My 2012 Muscle is nothing like this. What year is the Vrod in the video?
@danielgroce5088 ай бұрын
Sorry if this is a silly question, but after removing everything to get to the battery, is it safe to jump and start it with all those parts off?
@SuperBigcheese454 жыл бұрын
Thanks
@stephenmarble22533 ай бұрын
I have that exact same bike.
@DD-OO6 жыл бұрын
Forgot to add to loosen the screw from the rubber hose attached to the filter air box
@frederickwoodford3474
5 жыл бұрын
How to?
@imonittonite5 жыл бұрын
How can you possibly jump start the bike with the MAF sensor disconnected?
@REDMAN298
5 жыл бұрын
The ECM would go into default and it will run.
@bly4233
3 жыл бұрын
It’s only an intake air temp sensor. Very different from a mass air flow sensor. That’s why you can run the airbox “topless” with the sensor just nearby, and it runs great.
@keithfarmer91195 жыл бұрын
good job, do you know the allen wrench size for the stacks??
@tl8065
Жыл бұрын
6mm
@todorelojconfernando6 жыл бұрын
What a hot mess just to get to the battery, God Bless battery tender 😁
@FlyingWheels
6 жыл бұрын
Collecting Vintage Watches exactly!
@stevep1705 Жыл бұрын
I'm trying to remove my battery on my 02 V-Road and the alarm goes off every time I disconnected a terminal. I can't find any information anywhere for disabling the immobliser. Anybody out there who knows?
@tommyjuanadiaz74 жыл бұрын
What size allan heads? Tool
@tl8065
Жыл бұрын
6mm
@johnnymax4624 жыл бұрын
Just to add...don't pull the metal spring clip off the mass air sensor, just push it down.
@bly4233
3 жыл бұрын
Intake Air Temp sensor, not mass air flow.
@tl8065 Жыл бұрын
Some steps left out. Front clip, gasket problems and hoses
@tl8065
Жыл бұрын
Agreed
@melindafrazier35034 жыл бұрын
You did not show how to put battery back in which is the hardest part.
@charliedrake247 Жыл бұрын
What a lot of fluffing around I was going to buy one I don’t think I bother .
@metatronmen24313 жыл бұрын
The battery seats almost in horizontal position, is a sealed acid battery, gel or lithium?
Пікірлер: 50
the best how to mechanical video I've ever seen on you tube .. thank you so much
I've replaced mine twice. First time was total PITA, mainly due to the rubber hold down strap. I took it off, and played hell getting it back on. The second time, I left the rubber hold down strap in place, and slid the old battery out. Was able to stretch the rubber strap over the new battery, and slide it in. Much faster and easier.
Straight to the point and VERY helpful. Thank you!!
Great video! Also what a great idea having the bike set up for a quicker instructional video! Thanks
Thanks you! With everyone being stuck home and Harley Davidson being closed, I changed the battery myself after watching your video. Stay safe everyone.
@FlyingWheels
4 жыл бұрын
Ride safe. Keep both wheels down😁
@jdshemp
4 жыл бұрын
Is your dealer closed due to virus?
@Timo1276
4 жыл бұрын
@@jdshemp Starting today all non-essential businesses are closed. Harley-Davidson in Queens already closed shop yesterday.
@jdshemp
4 жыл бұрын
@@Timo1276 Thanks,told Boston Harley to release my bike from winter storage,hope they don't shut down.
You did a great job and didn't waste time with bs. Thank you
This video is very practic, thanks a lot
Just bought a 05 vrod thanks for the great video. Thumbs up and subscribed!!!
Thank you for the video. It's clear and we'll instructed.
Thank you good and helpful video Changed the battery of my fathers V rod 👍🏻☺️
Short and sweet - makes sense and was very helpful! Thanks bro-
Thanks man! Just changed my 2014 night rod special battery on an o’Reilly’s parking lot thanks to your video. Haha.
Bro, thank you very much! Done in 10 minutes.
Thank you very good video 👍
nice and easy brother. thanks
On a 2008 Night Rod (maybe all 2008+?) model there is an additional 7th clip on the rear end of the Air filter cover. Just an FYI.
@420ghoul
3 жыл бұрын
On the 100AE im using theirs a 7th
@mrx-od3ji
2 жыл бұрын
2002 vrod has 7 clips
Thanks dude!
Good video. Thanks. 66gordo
Thanks man
Thank you
WOW. My 2012 Muscle is nothing like this. What year is the Vrod in the video?
Sorry if this is a silly question, but after removing everything to get to the battery, is it safe to jump and start it with all those parts off?
Thanks
I have that exact same bike.
Forgot to add to loosen the screw from the rubber hose attached to the filter air box
@frederickwoodford3474
5 жыл бұрын
How to?
How can you possibly jump start the bike with the MAF sensor disconnected?
@REDMAN298
5 жыл бұрын
The ECM would go into default and it will run.
@bly4233
3 жыл бұрын
It’s only an intake air temp sensor. Very different from a mass air flow sensor. That’s why you can run the airbox “topless” with the sensor just nearby, and it runs great.
good job, do you know the allen wrench size for the stacks??
@tl8065
Жыл бұрын
6mm
What a hot mess just to get to the battery, God Bless battery tender 😁
@FlyingWheels
6 жыл бұрын
Collecting Vintage Watches exactly!
I'm trying to remove my battery on my 02 V-Road and the alarm goes off every time I disconnected a terminal. I can't find any information anywhere for disabling the immobliser. Anybody out there who knows?
What size allan heads? Tool
@tl8065
Жыл бұрын
6mm
Just to add...don't pull the metal spring clip off the mass air sensor, just push it down.
@bly4233
3 жыл бұрын
Intake Air Temp sensor, not mass air flow.
Some steps left out. Front clip, gasket problems and hoses
@tl8065
Жыл бұрын
Agreed
You did not show how to put battery back in which is the hardest part.
What a lot of fluffing around I was going to buy one I don’t think I bother .
The battery seats almost in horizontal position, is a sealed acid battery, gel or lithium?
@bly4233
3 жыл бұрын
AGM: Absorbed Glass Mat