Thanks for the video mate! It helped to save a lot of time.

@thebraapfarm

7 ай бұрын

You are most welcome

Hey mate, cheers for the vid. I installed the weight this weekend and this was a great help. One thing that you may need to check is the torque setting of 80nm. I have a 2022 se 300 and my manual states 60nm

@thebraapfarm

Жыл бұрын

Hey Toby! You are most welcome mate I’m glad the video helped. I have a 2022 250/300 2T Sherco Workshop Manual and it states the “Ignition Flywheel Nut” at 80NM. What manual are you referring to?

@dirtyoffroader2093

Жыл бұрын

My 2021 300 SE manual says 60nm .. but the 2022 model manual definitely says 80nm 👍 So how are you finding the difference with the weight fitted?.. is it smoother?

Est-ce que cela résout le problème de la grande vibration?

Perfect video bud..! Straight and to the point. U need more bottom end grunt..!!😂🤣 how did it turn out did it take anything away from the top end.

@thebraapfarm

Жыл бұрын

Cheers Jeff 🤘 The aim is to smoothen out bottom end power rather than add grunt, already got plenty of that! Haven’t been for a proper test ride yet, but expecting it will have some impact on the top end, or at least how snappy/revvy it feels getting to the top end if that makes sense. Will report back once I’ve done some testing

Seems I’m having trouble locating a flywheel puller so where did you end up getting yours from?

@thebraapfarm

Жыл бұрын

Ebay. Here’s the link: www.ebay.com.au/itm/303907608239?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=Ch2bD-abR3-&sssrc=2349624&ssuid=uLaf5kV8Sh-&var=&widget_ver=artemis&media=COPY

What ignition case cover are you using? I am looking for something that doesn’t interfere with my slave cylinder guard on my se250. Thank you

@thebraapfarm

9 ай бұрын

Hey Jesse, it’s a polisport cover, just need to trim a little bit away to work with the EE case saver 🤙

@stangindude99

9 ай бұрын

@@thebraapfarm thank you!

Would this put additional stress on main bearing?

@thebraapfarm

Жыл бұрын

Potentially? Don’t think it’s an issue though. I know of several guys running extra flywheel weight with no dramas. Time will tell!

Not sure it’s needed on the Sherco? Curious what your initial thoughts were on the first ride? Who makes the weight?

@thebraapfarm

Жыл бұрын

Popular modification for hard enduro on the Sherco’s. At least amongst the top riders here in aus. All personal preference at the end of the day, haven’t done any testing yet just a short ride in the back yard, noticeably harder to stall. Will report back after more riding. FM-parts make the weight

@danssubscriptions

Жыл бұрын

I’ll be interested to hear what you think once you’ve had time to test it.

Would this be worth doing to ktm 300? My 2015 always stalls.

@thebraapfarm

Жыл бұрын

Hey mate, I’m not too sure to be honest, don’t know too much about that year/model of KTM. How confident your jetting is on the money? Getting it set up right can have a big impact on engine characteristics and how easy it stalls etc

@benduroaustralia4661

Жыл бұрын

Oh I'm sure my jetting as well as a bunch of other stuff Is wrong. Maybe I should focus on that before I bolt more mods on

Have you been for a ride yet?

@thebraapfarm

Жыл бұрын

Yep. I love it Check this video: kzread.info/dash/bejne/gn6cs7KmZtm6g6g.html

Hi uncle dame