Seriously this was a quick and very informative video thanks!!

I know this video was done 7yrs ago but mate it's great information as I've just got a hardbrake pedal & i was going to clean out the lines first but I'm going 2 check the lines first & the valve, tks for posting, hi from Dublin Ireland 👍☘️🇮🇪🇮🇪🇮🇪

Thanks bro,helped alot.

Awesome, fast clear and nice explained good video boss!

Quick and concise.

Thanks for sharing!!!

thanks for the video

this is a really good one very quickly, please sir could you explain how to check clutch whether it is bad or good..

Excellent 👍👍👍

This is great. I just have a question i have a hilux 2003 and when i go high speed my brake pedal is hard and its not stopping properly when i push the brake but when I’m in normal driving its working properly, what could be the cause of this Thanks

I had to replace a check valve that snapped off now they brakes are spongy.. Does that sound like a.common issue after this repair..Must I bleed ..Thanks from UK

i have hard brakes on my Toyota Coaster mobile home. it hasn't been on the road 10 years I have bought it and I had it for two years I have done somebody work to it and decking inside of it and is time for me to look at the brakes. my brake booster is on the dashboard. I need to take my speedo out to have a look and check the pipes

I have a 2001 honda crv only get a good brake pedal when the engine is off. As soon as i turn it on the pedal goes straight to the floor. I noticed when i removed the vacuum hose from the booster side i had a good pedal. When i put my finger on the end of the hose i felt the vacuum pulling and the engine was about to die. Mind yiu i replaced the original booster with one from the junkyard before all this and the car still acts the same. Can it be the intake manifold. I really don't know anymore.

Which direction should the one-way face

Good video. I like It. Just a question, is there difference if I change the original vacuum hose for a generic one? Will it affect? Regards

@GarageGurus

6 жыл бұрын

Do not use generic hose or fuel line for the Vacuum booster hose repair. It may collapse and cause a loss of braking. Look for EPDM tubing for vacuum and emissions systems. It should be at least similar or better than SAE J1037 or J942b standard hose. The tubing should not deteriorate from heat, weathering or ozone, and it maintains its flexibility at low temperatures.

@NotoriousNuno

4 жыл бұрын

@@GarageGurus We have cold weather here, and yesterday I accidently hit mine with my hand, and the rear tube behind the engine snapped, leaving the plastic end inside the connector. I was hoping your video was going to show the procedure of removal & re-install!!! lol

My brake pedal is hard, the brake booster was rebuilt and I’ve checked for vacuum leaks. Everything is working as it should, however the brake pedal is still hard and even though I try to brake as hard as I can the wheels never lock up. Any help will be appreciated.

@tottirei1

9 ай бұрын

Did you find out what the issue is? I have the same thing going on

Help ! Was working on my 5.7 vortex distributor when I’ve noticed the brake booster vacuum connector that is attached to the intake manifold has snapped off due to old age and fallen in the engine when I started the vehicle it started making a loud knocking sound

@gabrielhugo7

2 жыл бұрын

i know im asking randomly but does anybody know of a tool to log back into an Instagram account..? I was stupid lost my account password. I love any assistance you can give me!

@noeulises7631

2 жыл бұрын

@Gabriel Hugo instablaster =)

@gabrielhugo7

2 жыл бұрын

@Noe Ulises Thanks for your reply. I got to the site through google and im waiting for the hacking stuff atm. Looks like it's gonna take quite some time so I will get back to you later with my results.

@gabrielhugo7

2 жыл бұрын

@Noe Ulises it did the trick and I now got access to my account again. I am so happy:D Thanks so much you saved my account!

@noeulises7631

2 жыл бұрын

@Gabriel Hugo happy to help =)

I drive a 2015 golf tsi 1.8 and I came across a situation where, when I am idling, as I compress the brake pedal I can hear a hissing noise or (air escaping) and then the pedal becomes hard. Can someone please help. I checked the vacuum lines and they all seem good and relatively new. I also pulled the check valve form the booster and heard a small hiss, not very much but it was there.

@American_Devil

3 жыл бұрын

What was the solution?

@Dustytrailzzz

3 жыл бұрын

@@American_Devil brake booster. The blatter inside the pump had a small tear

@American_Devil

3 жыл бұрын

@@Dustytrailzzz I replaced the pads last night and now I’m getting soft pedal and sounds like I’m stepping on a bag of air in the brake pedal. I just dropped it off for brake inspection. Thanks for responding so quickly

@Dustytrailzzz

3 жыл бұрын

@@American_Devil well hopefully it’s not the brake booster. It cost me 900$ CAD