Harbor Freight Pittsburgh 1/4" Steel Striking Stamp Set Review
63677, here's a review as well as a quick demonstration and some tips on successful use on this harbor freight set. they also have these in 1/8" and 3/8" of an inch they are a reasonable quality for the price. embossing stamp set these are surprisingly handy and can be used heated up to burn wood or melt into plastic as well as stamping traditional metallic items. These are not meant for stamping into hardened steel. . .
Пікірлер: 43
Grind a groove in the side of the stamp so that it faces you and you can feel it with your thumb when making the stamp. Good quality (American made) stamps have this groove already cut. Make a wooden block with holes to hold the stamps. It makes it much faster to pull the stamp as you need it. If you get fancy you can make a cover for the block like a quality set has.
5:00 in order to keep my stamps in the correct direction, I paint a small dot on the side facing me when I use it, so I know that the stamp is positioned correctly.
@sadamkhan-te6yz
6 ай бұрын
Order
These are on my want list. Thanks for the review
Tip for people with poor aim: Use a plier to hold instead of your finger. You'd never guess how I know. I made a jig with wood to hold it at 90 degree and hold.
The problem I always had with these is the actual letter alignment and spacing. When I was in trade school I spent a day or two trying to mill a holder where you can put all your letters in and snug them together with 2 thumb screws. If I remember correctly it didn't work too good. After all the letters where in the holder you basically needed a press to have enough force to deboss all of the letters at once. And due to the shape at the tip all the letters seemed widely spaced apart.
Super helpful - thank you!
A stamping jig that's set on a rack could come in handy if you needed to do a lot of stamping and want to keep them all on the same line.
Some great tips here thank you!
0:35 Wrong! You flip the 9 upside down to make a 6.
@jeremyanton2211
4 жыл бұрын
how to order
SOLD!!Bout to make my keys a lil easier to figure out.
I use these to engrave bottle caps for my business. Where would you recommend to buy for expanding my collection of these?
Hi did you know where find a larger model ? Bigger letters, like 2 or 3 centimeter ? thanks
►►► helpful video ☺ Thanks
Do you know what kind of steel the stamps themselves are made of?
Pretty cool review. I have never seen a real use for these except for our IO-520 to IO-550 conversions. They had a better set of stamps.
Thanks
I’m trying to stamp my initials on to a knife I’m making with This set with steel from Home Depot that’s about 1/4 in thick would it be the same process or is it any different?
@CatusMaximus
4 жыл бұрын
Yep same process just try to focus on keeping the stamp nice and straight and you can always hit it again if it doesn't go deep
@eduardotrevino5325
4 жыл бұрын
Catus Maximus thanks
I bought these to make dog tags for my dog, seem decent enough.
Think this would work for aluminum anodized lower receiver?
@CatusMaximus
4 жыл бұрын
They would work great on aluminum although I would suggest doing a couple practice uses because it's really easy to overdrive them on softer materials
Why not mark the stamp itself on the side of the shaft to indicate the proper position. Just a dot of paint would do.
What about Titanium? Is it easier or harder to stamp than steel?
@loveydovey4u
2 жыл бұрын
Titanium can be hard or soft. There are so many different grades. 6-4, regular Titanium, 6-4 eli...
How buy stamps
How much this price
I got the 1/8 set it has two E no A
@CatusMaximus
4 жыл бұрын
That's how Harbor Freight keeps you coming back... :)
Funny that HF compares these to a Grainger set for over $300. Wow, what a savings! 😒
What about stainless steel??
ADMIN PLEASE IS THIS WORK ON IRON GADAR AND WHATS THE PRICE
@DerpedOutTroll
2 жыл бұрын
😂😂😂 admin?
can you use these for wood?
@roughcutguitars
4 ай бұрын
Yep. Helps to lightly dampen the surface with a moist paper towel to take the impression more deeply.
I just tried the stamping set from Harbor Freight on a boat trailer tongue. It's a no go. Using a small sledge hammer it barely made a mark. I'm getting a refund.
Yah kis kam Mein Aate Hain
6mm
Hi
@CatusMaximus
15 күн бұрын
Hello