@Noah Krankowsky it is hard to say without testing it, but some metals are just to hard or too thick to stamp into.

Pauline we are using blanks intended for stamping, usually made from copper, brass, pewter, or silver plating on one of those. Some of them are available on our site, though we carry limited styles: www.thebeadco.com/CategoryProductList.jsp?cat=Tools:Metal+Stamping+Supplies

The masking tape tip...Excellent!

Thanks! This helped a lot in making my medic alert dogtag!

Many thanks,very informative.

what material do you recommend for jewelry, aluminum seems popular on amazon?

How many times do you have to hit it to put an impression in Vanadium Tool Steel, with the smallest letter set?

This would make a fun hobby. Thanks for sharing!

@Potomacbeadco

Жыл бұрын

You're so very welcome!

Excellent video. 😊👍

What size blank are you using when you did the one letter with the 6MM stamp?

Would this work with steel sheet metal (about 1mm and 1.5mm thickness?)

What about logo stamps, can you create a stamp for my logo to fit on 15mm metal snap button?

Where can I buy all this ? How can I get a custom stamp and what metals can I stamp? Stainless steel? How thin? Thanks!

I want to get it.

Could've used the clanging sound effects from the Mark VII logo.

Hi is it possible to stamp on stainless tag 2mm thickness ??

You have lovely hands and Sweet voice.

@ManTazkaree

2 жыл бұрын

Can i mark serial number on my pistol barrel with these stamps? Slide and barrel are made of 41/40 steel. Glock 26 pistol plz Answer

How do you sell stamp"s or where?

Sister, where can I get these stumps? I needed a lot more

Hi, good video. I have a "925" stamp and I want to use it on the back of some pendants I am making. Is there a surface or something that wont mess up the front of the pendant when I stamp the back? Thanks.

@Potomacbeadco

10 жыл бұрын

I would probably just put it on top of a bead matt or something similar that will keep the front from scratching. Unless there is a cabochon or something you don't want to damage, you should be ok with that.

Will this mark good on plastics?

Hi! I loved your video. Where can I find the letter stamps? I would like to purchase similar to what you used in your video. Thank you!

@Potomacbeadco

3 жыл бұрын

I would recommend Rio Grande to purchase from for the letter stamps (we used to carry them but they are crazy heavy and a ton to ship).

Hi can u tell me the Engraving depth of stamp punch please ?

Hi! I just can’t manage to get the stamp to appear! What am I doing wrong?

Hello! What kind of metal do you exactly use? I've made tons of beautifull aluminum discs, but now I really can't stamp them well. My dad can, but when I stamp as hard as I possible can, there only is a little mark...Whilst I thought aluminum is the most soft silver coloured metal (apart from real silver). In the other reactions I saw someone say 'brass", but brass is gold coloured, right?

@paulienleppers

9 жыл бұрын

It look so easy when you do it.. I hit so hard (with a very heavy hammer), my wrist really really hurts. When I compare my hitting with yours mine is so much harder. I really don't get it. Why does it go great when you hit, but not when I do? :-(

@channe_

2 жыл бұрын

@@paulienleppers me too, i was tried to hit the pendant so hard but it doesn't leave a single mark

@ouissaltribak6643

2 жыл бұрын

@@paulienleppers Hi, can you tell me from where did you get your stamps? Thank you in advance

Thanks for nice video xx

@Potomacbeadco

6 ай бұрын

You’re welcome 😊 We have a library of Better Beader episodes that cover a range of bead weaving and jewelry-making topics that you may find helpful! Feel free to browse! www.potomacbeads.com/how-to/better-beader/

Hii i have rvs hangers but I have to hit it like 5 times before it becomes properly vissible, how to fix??

Sara no you don't have to have a hammering block if you have something heavy/substantial (that won't be damaged) on which to hammer.

Cool!! Thank you.

@Potomacbeadco

3 жыл бұрын

You're welcome!

do I need that metal block thing? and that hammer? can I just do it on concrete with a regular hammer?

@Potomacbeadco

7 жыл бұрын

+Nicole if you have a hard thick surface that would probably work. Concrete may be ally scratch up what you are hammering, or actually crack. Probably any hammer that isn't rusted should work fine.

I wonder if this method is viable for stamping the engine number on my bike's new crankcase

@Potomacbeadco

3 жыл бұрын

i would think so!

I want to buy

Still an educational video, thanks.

@Potomacbeadco

Жыл бұрын

Glad you enjoyed it!

Do I have to have the hammering block in order to do this? Or can I substitute it with something else?

@tufaznail

9 жыл бұрын

Did you ever figure it out? ;)

@Nicole-sn4mg

7 жыл бұрын

yes we can use anything as long as it can take the hit

Ye kis name se milega

Do i have to buy special stamps of can i just get a set of leather stamps?

@Potomacbeadco

10 жыл бұрын

We have never used leather stamps, so you can certainly try them. If that doesn't work we (and other bead stores) sell various stamping kits with all of the letters in the $20-30 range.

Every time I try to stamp. They are never even and stamp moves with my hammer strikes. So image is distorted and it looks like I hit it 10 times. Lol how do I fix that

@tommywest7892

2 жыл бұрын

not sure

what metal should i use to stamp words into titanium?

@Potomacbeadco

6 жыл бұрын

Sorry not sure, we have never tried stamping titanium.

Thank you!

@Potomacbeadco

10 ай бұрын

You're welcome! Thanks for watching!

What material are the stamps made of?

@Potomacbeadco

6 жыл бұрын

Generally brass

Where did you get your stamps?

@Potomacbeadco

7 жыл бұрын

They are carried in Potomac Bead Company retail stores, and sometimes offered online here: www.potomacbeads.com/Metal-Stamping-Supplies-s/2498.htm

That was only 2 tappies on the J, Jess!!! Lol.. Thanks for the clip all bs aside!!

Is there any machine available .. I mean without this painful hammering ?

@Potomacbeadco

4 жыл бұрын

No, that would only be at a factory level. The hammer is light and the hammering is just tapping, in the case of stamping metal, just a single tap.

Good video

@Potomacbeadco

2 жыл бұрын

Thanks!

Hello what size is it on your punch stamps

@ID-8491

6 ай бұрын

7 years has passed without any answer.

A bit of advice from a Machinist....get a bigger hammer....hit it one time.

@aertybhujm1

6 жыл бұрын

I have finished watching this video completely. (我看完這部影片了) I am a Taiwanese who cares about the global affairs. (我是一個關心全球事務的台灣人) And, sadly, most of my fellow Taiwanese don't really care about the world. (但是，很不幸地，我大部分的台灣同胞不那麼在意世界。) Hopefully Taiwan can become increasingly globally-aware and globally-competitive. (希望台灣可以越來越有全球意識與全球競爭力。) God bless Taiwan. (天佑台灣。)

@AteuCu

5 жыл бұрын

Yeah, q16 oz or so..

@lonoaeaohana4586

4 жыл бұрын

Lol wish I read this earlier...😒🥴 wasted a perfect good gold filled bar black...

What size are those tags? Please and thank you

@Potomacbeadco

2 жыл бұрын

They are about 1 inch!

How we get this stemps to do at home

@Potomacbeadco

Жыл бұрын

Here is a link to our available stamp supplies! www.potomacbeads.com/shop?search=stamp You can find more on Amazon etc!

Perfect for my 80% lower build!

@DaveSmith-cp5kj

7 жыл бұрын

I bet 90% of people here have no idea what you mean. :)

@brandonr.2807

5 жыл бұрын

haha....also why I am here

@milleniumann28

5 жыл бұрын

lmao why I'm here also..... they have no clue indeed!!!!!!

@milleniumann28

5 жыл бұрын

And she's cute with no ring 💍 wish she could stamp my lower if you know what I mean!!!

@brandonr.2807

5 жыл бұрын

Sadly, I couldnt get this to work on my lowers. Its just too dense. if anyone has any luck make a video!

I got some for my metal blank business cards

@Potomacbeadco

Жыл бұрын

Thank you for watching!

3 hard taps..???, jeez, that metal she banged on must have been soft aluminium.

What’s the material of the pendant?

@Potomacbeadco

Жыл бұрын

metal!

Thanks 🫡

@Potomacbeadco

Жыл бұрын

You're welcome!

Can I get the Stamps from my local Post Office? 😃😃😃

Where is he avalable sir

@Potomacbeadco

2 жыл бұрын

You can get it here: www.potomacbeads.com/metal-stamping-supplies

neat

can you stamp titanium?

@Potomacbeadco

5 жыл бұрын

Hello, Alfredo. Yes, you can stamp titanium, however, you need more generous stamping.

@alfredom877

5 жыл бұрын

Thank you so much I will subscribe to ur channel

@Potomacbeadco

5 жыл бұрын

Looking forward ^_^

I have finished watching this video completely. (我看完這部影片了) I am a Taiwanese who cares about the global affairs. (我是一個關心全球事務的台灣人) And, sadly, most of my fellow Taiwanese don't really care about the world. (但是，很不幸地，我大部分的台灣同胞不那麼在意世界。) Hopefully Taiwan can become increasingly globally-aware and globally-competitive. (希望台灣可以越來越有全球意識與全球競爭力。) God bless Taiwan. (天佑台灣。)

Why my stamp aren’t stamping?

@Potomacbeadco

3 жыл бұрын

Perhaps what you're trying to emboss is too hard?

Did she ever hammered her own finger ????

Any one else stamping Fire/Safe markings on home manufactured AR15 receivers? Lol

@Potomacbeadco

10 жыл бұрын

Steel can be harder to stamp than a lot of the brass supplies that we sell, but we wish you luck with it. Be sure to stamp hard!

@DaveSmith-cp5kj

7 жыл бұрын

AR receivers are aluminum which is softer than steel (unless you are using welded flat spot receivers). You are fine, but be aware that the walls of the aluminum is thin. Extruded aluminum is strong, but potentially you could crack or shatter it. Stick apiece of steel between the gaps and rest on a solid surface to be 100% sure you don't damage it. Keep in mind the BATFE doesn't actually require serial numbers unless you sell back... then again they don't follow their own rules anyways so...

@BuildBreakFix

6 жыл бұрын

Who needs a saftey..... more like fire and fully auto....

sounds good for skull stamping to identify deceased corps.. just saying..

@FrancisR420

5 жыл бұрын

Or make dog tags which is also used for that

You should hold the hammer at the end of the handle. This is the wrong way to hold it.

I am going to, I am going to, I am going to bed

Wow, pretty cute girl!

Haw muth 5mm

You only picked up one S, there are two in Jess. :-)

Humm the ( J ) you tap only 2 time ???

Er ... why not simply TAPE the letters TOGETHER ?? ... that way your name will be STRAIGHT ... Also, use a heavier, bolster hammer and your stamping will be sharper.

@Potomacbeadco

6 жыл бұрын

Because you can't hammer all of the letters at the same time. It will dilute the force and the stamps will bounce around.