This is the only video where somone shows what they're doing and shows no kinks at all , best video on pipe bending

@RightOnJonCrane

6 ай бұрын

Right On! 🙌 Thanks for the compliment! I appreciate it!

You're the, "FIRST" UTUBER WITH A SHOW THAT HAS REFERENCE UTUBE AS A GO TO SOURCE OF Valuable info they use to learn DIY hands on skills/whatever...others stumble along wasting time when the could have used this wonderful resource...Hope Momma doing well, tanks for sharing

@RightOnJonCrane

Жыл бұрын

Right On Tom! 👍🙌 Yes KZread is an amazing resource! Even if it’s something I know how to do there might be a better way or some useful tips. I’ve learned so much on KZread. Mama cat is doing really good! She’s fixed now and enjoying retirement! 😄 Lots of chasing squirrels 🐿!!

kinked a few top rails, thanks for this clip, it saved me from wasting more money.

Grits from Poland. Excellent job.

Great looking railing. And made for life!

Followed your method to build my railing. Thank you, it worked perfectly

wow wow wow...I learned so much from this video, thank you so much... I had a bender like your I bought 24 years ago, never thought to mark out in 1 inch increments like you did, I just tried doing in one shot...... best wishes from Florida, Paul

Very nice build. Lots of cool tricks in the fabrication world. I've been working on making a Hossfeld bender. I have the frames done and now working on some of the tooling.

@RightOnJonCrane

Жыл бұрын

Oh right on! 👍 That is great. Those benders are awesome. I used to work in a shop that had one. All the amazing things that can be made. There are some good old instructional videos on KZread about the hossfeld bender.

Good demo, should've capped the ends... Agree with fastcap, DeWalt anchor bolts, easy pease... Nice job..

Made hundreds of feet of handrails back in the day but it was always using fittings, never used a bender but it looks like fun.

@RightOnJonCrane

Жыл бұрын

Right On Raw Bacon! 🥓 Those fittings are nice! This bender is a little crude but with a little persuasion it gets the job done ✅🙌

Thank you best video..Papua New Guinea❤

Best video I've seen to date. Helped me alot . Thank you

@RightOnJonCrane

4 ай бұрын

Hey Right On! 🙌 Thats great to hear and I and I appreciate the comment!

Looks great!

Thanks for the tips (nice welds too)

Beautiful shop, and thank you for sharing your knowledge. Hopefully, my bullbar on my project International Scout 2 turns out well.

Great tips in this video!

Best video and only one!!!!!

Excellent work mate very helpful indeed!

@RightOnJonCrane

3 ай бұрын

Right On! 🙌 Thanks for the nice comment!!

Nice job !

Very nice job Jon. Your welding looked great! Right On Jon!!👍😎🇺🇸

@RightOnJonCrane

Жыл бұрын

Right On Roger! 👍 Thanks! 🙌 ⚡️⚡️⚡️⚡️

Very enjoyable and interesting. Thanks for showing us.

@RightOnJonCrane

Жыл бұрын

Right On Tony! 🙌👍 Thanks for watching!

Nicely done Bud!! Jon Crane will figure it out!!☻

@RightOnJonCrane

Жыл бұрын

Right On Roadking! 👍✨ No more slipping on those stairs!

Hi Jon ☺, neat job my friend, and looked right on when fitted, those pipe benders make easy work of it. Good to see you again, stay safe, best wishe's to you and your's, Stuart UK.

@RightOnJonCrane

Жыл бұрын

Right On Stuart! Always good to hear from you. 👍🙌

Real nice job Jon. Nice demo with the bender.😊😊😊😊😊😊😊

@RightOnJonCrane

Жыл бұрын

Right On Randy! 👍 I’ve got a backlog of lots of videos. Just need to sit and edit. Lots of work in the shop lately.

Very good tutorial, I am about to make my first tube bending project and I this method will also work with aluminum tubing. Thank you for sharing...

@RightOnJonCrane

4 ай бұрын

Hey right on! 👍 That’s cool. It’s not the fastest method but slow and steady wins the race! 🙌 Thanks for watching and hope your project comes out great.

Right on! 👍🏼

Another nice job...just need more...🖖

@RightOnJonCrane

Жыл бұрын

Right On Chuck! 🙌👍 Right! 🖐🖐

Your level of precison amazes me. I am so impatient, no doubt i would rush thing and try and make that 90 in one shot. Outstanding work. Cheers

@RightOnJonCrane

Жыл бұрын

Right On Joe! 🙌👍✨ Thanks for watching. I appreciate the kind compliments! Hope all is great in Florida! 🍊

Awesome project Jon! I went to buy a small piece of Black Pipe yesterday and was shocked at the price! They must think it's Brass! Crazy... Great stuff

@RightOnJonCrane

Жыл бұрын

Right On John! Thanks! 👍🙌 Yeah steel prices are way up! That cheap black pipe ain’t cheap anymore. 😳 At least plywood isn’t $110 for a 1/2 sheet!

Nice bend 👍

@RightOnJonCrane

Жыл бұрын

Right On! 🙌Thanks!

That’s a great way to do those bends without having a very expensive bender. Nice that you showed how to generate the radius you needed. With expensive tube benders you need the radius dies required and they too are expensive. My only comment would be to have an air over hydraulic cylinder. Sure saves time and effort. BTW Harbor Freight I believe makes a nice knob to open the valve. I made my own before I found out you can buy them. However being a toolmaker it was just another fun little project. Great Video though !

@RightOnJonCrane

4 ай бұрын

Right On! 🙌 Thanks and that’s a great tip about closing the valve with a knob. I will look at Harbor Freight or make one. Thanks for the comment!

@Lwimmermastermetalart

4 ай бұрын

@@RightOnJonCrane 👍🏼👍🏼

Very nice work! How did u conclude that you needed 15 pumps… was it just trial and error for that pipe or some kind of formula?

9:0 5, love that Wells Saw

great video. I have been thinking about cutting a viewing port so I can more easily measure the angle of my bend. Don't think it will compromise the strength of the bender. What do you think?

Can this method be used for a shallow arc? Would it be the same number of pumps for each bend or would the throw be different for each bend?

For marking steel I like to sharpen the tip on a 3 point file with a grinder and make it into a scribe, then use the scribe to scratch the mark directly into the steel. Eliminates the problems with thick paint markers, which can lead to errors in your final product. I think the machining industry term is "tolerance stacking". If you've ever plotted multiple azimuths on a map with a thick pencil line, all the differences add up. I learned from experience to use a mechanical pencil to save myself a lot of walking and/or getting lost. A lot of skills you learn overlap into other disciplines.

@QuicksilverdotFX

6 ай бұрын

Why would you overcomplicate this? Leave it to metal workers to give people advice.

Where did you get those clips for the metal ruler???

👍👍

3k Likes 👍

very nicely explained how to use a bender, 90 percent of the video is explained incorrectly, I believe that you need to know how to handle this bender and most of us don't know...

What schedule is pipe

@RightOnJonCrane

8 ай бұрын

Right On John! It’s schedule 40 👍

My harbor freight bender leaks oil everywhere if I put it on its side, even though it has feet for that exact purpose, and the manual says it will do that and to NOT lay it dow. What happened? Is the new version worse?

@RightOnJonCrane

Жыл бұрын

Yes, mine leaks a little too! There is a modification that can be made by adding a tube inside. It makes it so the Jack can also be used upside down. Perhaps I’ll dig into it and make a video! 🙌

Im completely torn between the more rugged ethic DIY cheap way for clout, or just dropping 2k+ for baller status lol... i only have an off road bumper planned for now, but if i buy a nice one ill probably open the door for more projects...

@RightOnJonCrane

Жыл бұрын

Oh get the nice one! 🙌✨ This one will get ya through for the short while but if possible get the goods. 👏

Fast Cap??? They make that glue. P2-10??? They make rulers? Gotta see what all they make.

@RightOnJonCrane

Жыл бұрын

Right On Alex! Yeah, Fastcap makes all kinds of cool things! Check ‘em out!