Sold! I bought one. I'm going to look at your howto scope videos now hat I'm a scope owner! Thanks again for your channel. Nice to hear you are getting free stuff.

Thank you for the review, very helpful for someone thinking about getting their first oscilloscope, like myself

Thanks for the excellent review

Excellent review 🎉 Going to get one used and your info was very helpful. TY!

Very helpful to view this great video. I just bought this same scope. I will enjoy getting to know it more. Thanks 😎

62 years old and never owned a decent scope. You should box this one up and make my day ! LOL Nice scope.

@PhG1961

4 жыл бұрын

I feel sorry for you and indeed, although I would also like a decent scope, I believe you should get one first ! I'm 58 years, so I can wait a little longer... Go for it ! You have my support !

@antoineblanchard

3 жыл бұрын

well.. I sacrificed a lot to have my first oscilloscope, right at the age of 43. * Previously I used an amplifier connected to a 90 ° rotated coil of a ctr TV and a multimeter at the same time. Greetings.

I'm starting out. ¡Keep sending this guy free stuff to review! 😁 Keep safe dude. Ta for your expert tutorials.

Thanks for your review. I bought it. Waiting for the delivery.

Man, you have a bunch of scopes :) Thumbs up for that!

Paul - LOL - they sent me one of these too:) Its been delayed two weeks in shipping because of the current situation. Now what do I do when I get it?

Really nice scope. Thanks for the FFT section. This one may work for low frequency RF work. Stay healthy Paul.

@learnelectronics

4 жыл бұрын

You should know soon enough...

My old hameg takes up way too much room, it's going and I've just ordered one of these, right angled power plug fixes the main gripe you have, I'm looking forward to using this, thanks.

Nice video !

Well Done

That looks like a nice little scope. I have an older HP 100 MHz analog scope, but it's a big boat anchor. lol

Totally unrelated comment, but Holy crap, this video just got commented on by MrBeast. Honestly, you deserve it bro. I've been learning a lot from your channel. Hilarious coincidence is that your hands, demeanor and knowledge of electronics reminds me of my dad, so that probably why I've kept coming back XD haha

Does it graph frequency? for ex. a time of 10 seconds across the screen measuring a fluctuating frequency 2Khz-10khz and the "picture on the screen would be a wavy line?

Can it do a snapshot? I am not sure how to explain it. I am just now getting into using oscilloscopes. But I am going to be using a photodiode connected to the oscilloscope to measure monitor pixel response. Essentially the photodiode will read the change from say full black to full white. And how long it takes for the pixels to stabilize. According to some articles I read, this is how they are tested. But the change will only happen once. It wont be constant. Will the oscilloscope be able to measure that change and then stop reading? kind'a like a snapshot?

Amazon link its gone and searching for Hanmatek oscilloscope gives no results?

Thank you

Thats cool I got one too

Do you know the number of points on the FFT ?

You could use a right angle adapter or a right angle power cord to reduce the width.

very nice indeed

I've been looking for a video like this that shows on an oscilloscope what a power supply really looks like at each stage and it's more sloppy then i expected. I'd love to see the various filtering stages of that amp you built. And better yet play around with inductors in an unregulated power supply. I won't be making a video but I might beat you to it. I'm in the market for an oscilloscope.

Given the multiple harmonics on the FFT... isn't it almost representing a square wave? The waveform looks very sine-ish, so maybe the FFT is more accurate. Am I reading that correctly? I would have assumed the FFT operation would use the same digital data as the waveform display, but if the FFT is more accurate, then maybe the FFT is processed in hardware or something?

Is there a setting in it's menu to increase the size of the font? It's getting harder to read the math on screen! I'm currently looking at a USB oscilloscope on eBay that is listed at $120AU which looks promising, it's not the hantek but totally different in appearance, it has a silver metal case with blue plastic. The software looks better than what the hantek offers and even has FFT! For me, I can have it display on a bigger screen to make it easier to read.. Someone did a review on it but I can't remember who it was, I rushed out to eBay to check for availability and price... As it stands.... The Australian dollar is worth nothing at the moment so I'm going to wait till things improve around here.

Looks like OWON. Can you compare side by side and teardown as well?

Nice, but I love my Rigol 1054Z. Must be nice to have companies send you toys. Good Job.

I read Hantek so many times, I just realized that it's something else entirely. It's sad when not even they honor their own trademarks. But, NEW SCOPE!!!

@whollymindless

4 жыл бұрын

Controls are nicely spaced for our fingers!

Is this made by owon? I mean I see it's hamntek but it looks like an owon in both buttons and menus

Great review, thanks! You know you can buy a right angled plug for less than $10. Its just a plug and is not really part of the scope.

As far as I can see it’s OWON “lite” scope. Case, letter prints on the front , buttons, and the firmware too.

@ReferenceFidelityComponents

3 жыл бұрын

Yes...looks like the exact same scope

@atexnik

3 жыл бұрын

Of course, it is, because there is no real manufacturer as Hanmatek. Just a brand, made specifically for a german market, probably. Same chinese quality, just labelled differently.

You didn't take a look inside, probably the same as the OWON SDS 1102 you reviewed. Are these the same units but with different brand names?.

Rebadged OWON SDS1102, I like mine, but what is the point with the rebadging?

@learnelectronics

4 жыл бұрын

No idea

Sweet

Looks very similar to the Owon SDS1102!

@antoineblanchard

3 жыл бұрын

yep, is Owon sds1102 from Owon_lilliput rebranding.

Tempting... I like the bigger screen, and the FFT display looks nice, but I think I'll stick with my Tek TDS2024. :-)

Спасибо за обзор 👍

Can the trigger reference position be set to the left side or is it permanently stuck in the middle?

@learnelectronics

3 жыл бұрын

You can move it

@xavieraxiak6866

3 жыл бұрын

But can it be moved in a way that it will stay in the same place on the left when the Time Base is changed?

@xavieraxiak6866

3 жыл бұрын

Absence of the proper setting makes a DSO tedious to use.

Is this the exact same unit as the OWON SDS1102? The hardware and software looks the same.

@learnelectronics

3 жыл бұрын

I believe it is

@AlwaysTinkering

3 жыл бұрын

Also sold as the Mustool MDS2112P

Qual o melhor, owon ou hanmatek?

I'll bet if you take this apart, it will look just like the Owon SDS1102 or the CDEK SDS1102X?

@antoineblanchard

3 жыл бұрын

from lilliput.

Can you define "Gazinda"? Is that analogous to "Huevos"? 🖖 Nice little scope.

Hmmm... Perhaps there's an O-scope in my future. Thanks for the nice review!

@whollymindless

4 жыл бұрын

A scope can answer a lot of questions - after it has made you question your sanity.

Is it normal for a scope ths size not to have a 10MHz Sync?

@learnelectronics

2 жыл бұрын

Yes

I hope that wasn't your son taking your car out for a spin! Haha, "Dads making another video, time to take the hot rod out!" :-)

@learnelectronics

4 жыл бұрын

Lol no

Yeah I would have to make some modifications! #1 90 degree angle power cord running to the back. #2 cooling fan. That's just kind of stuff I like doing though! :-)

@maff909

4 жыл бұрын

Lol modify everything 😆

@ReferenceFidelityComponents

3 жыл бұрын

It doesn't get that hit in use. Had mine on for several hours and it was fine.

you're in Toronto like me I think...(or at least Canada) - and I'm looking for a starter O-scope and of course Amazon Canada doesnt carry this :( Still going to buy the Hantek DSO5102P from Banggood I think

@davidpyper1688

4 жыл бұрын

I have the Hantek DSO5102P. Its a great scope. I have had it for 2 years and does everything I need an oscilloscope to do. You won't be disappointed.

@learnelectronics

4 жыл бұрын

Toronto, Ohio, USA

@808v1

4 жыл бұрын

@@learnelectronics ahhhh, thats awesome...I didn't realize their was another one. Thanks for the videos :)

is the same Owon sds1102 , from lilliput.

Sounds like Hand me down OScope.

Unavailable in the UK ☹️

@alesisplayer2493

4 жыл бұрын

Yes it is I purchased mine last week off Amazon arrived 6 days later its a cool oscilloscope I live in UK West Yorkshire

@maff909

4 жыл бұрын

@@alesisplayer2493 oh yeh I see it now. 200 big ones tho. Maybe another time lol

Who makes US built oscopes?

@markgreco1962

4 жыл бұрын

Clyde Denby my guess no one

@clydedenby1436

4 жыл бұрын

@@markgreco1962 that should be seen as a problem.

@markgreco1962

4 жыл бұрын

Clyde Denby agree

Yeah that side power plug is really a pain.

Strange.. Looks like they tried to re-purpose the Hantek models or something.

how does it compare with the Rigol DS1054Z?

@learnelectronics

4 жыл бұрын

Rigol blows it out of the water

Its A Rebadged OWON

3:32, that side is NOT naked, it clearly has a USB port right there.

@gustavoruiz5637

4 жыл бұрын

On the left, can see it :)

Buddy! Can't you see that this oscilloscope has defects? 1.See the title! He has the letter "N" upside down 2. Look at the divider-probes. They're at 100MHz! And according to the rules, they must have a bandwidth 3-5 times greater than the bandwidth of the oscilloscope channel! 3. Turn on the sweep speed 1 or 5 or 10 seconds and watch. You will probably see that the timeline starts from the right side of the screen! While for all oscilloscopes, the time axis (baseline) should go from the left side of the screen to the right! If your sweep moves from left to right, you're in luck ... I was not lucky! The store sent me a malfunctioning oscilloscope with defects that I indicated to you. The letter in the title is inverted. Incorrect divider probes included with the oscilloscope. And the time line is not working properly. I think that's not all. I do not have the equipment to fully test the specifications of this oscilloscope. But I proceed from the fact that I see there a complete lack of verification of products by a quality inspection. Therefore, we can expect even such an inconceivable defect as an inverted letter in the name of the device on its face or an inverted line of the time axis ... Turn on the oscilloscope and look for surprises in it.

Name is too close to Hantek but not a Hantek. I can't buy it just for that reason lol

Want to sell it?

AC plug is fail trigger in is full fail

LOL, Now... no, Now.... now, please?

Made in China???

@antoineblanchard

3 жыл бұрын

yep.

copy cat? look at the name. it sounds like Hantek

I bought one some days ago, mine is Labloot is the same Hanmaek. Both are Owon clones. Hard to beat for the price. I notice that heat a lot, I make a square hole in the back and install a 12 volts fan, power supply is 5,5 volts only. I use a DC-DC converter.

Please teardown 😁 😁 it sir