Paul, I've got to hand it to you. Don't know anyone else who could make filing a saw blade interesting enough to watch the whole thing. And find it interesting. Hats off. As they say here in Texas.

A hint for those like me that get lost easily. I would mark all the valleys with a permanent marker before I started sharpening. As you sharpen the black mark is removed and you know where you left off.

@Paul.Sellers

8 жыл бұрын

+Katie Dotson (K8-T) You don't really need it if you remember the adage, sharpen the back of the tooth leaning away from you.

@drumboarder1

3 жыл бұрын

@@Paul.Sellers you seem to forget that I'm retarded

I've just bought two S&J saws with the sole intention of doing exactly what you show in this video - converting one to rip saw. Nice to see how easy it is to do and how well it performs when done.

As I have started to (attempt) to switch from "DIY carpenter/function over form" guy; to "woodworker", I've found that no one on youtube can explain both the easy and hard concepts better than Mr. Sellers. Thank you sir!

@danhartman9087

4 жыл бұрын

Oh my gosh - I have a woodwork twin! My problem is, I waited 40 years to go from function over form, so now we're teaching an old dog new tricks! Gave up "mechanicing" after over 45 years as a hobby - high performance and vintage car parts (and of course - the cars they go on) got way too expensive for my budget. Mr. Sellers is a blessing. I must say though - less wood is going into the fireplace!

@russellmckay8896

4 жыл бұрын

Dan Hartman it's funny you say that about less wood going in the fireplace. I've actually started grabbing pieces of oak firewood to rip and cut stock out of for building small boxes. It's much for satisfying to me personally to take my wood from a rough split piece to a hand ripped, hand planed, beautiful piece of stock

@trackie1957

4 жыл бұрын

Deadly Chicken in that case, you might save some work if you get a froe for splitting (riving) out of the log and a hatchet to hew to rough shape. A lot less sawing! Check out Peter Follensbee’s videos on hewing. He makes fine furniture using stock that is split, hewn and planed.

After watching this video last year I bought one of the S&J saws. I didn’t sharpen it or change the set - it works pretty well for both rip and crosscut. I rarely need a perfect crosscut if I’m using a panel saw anyway and it works great at rip. I did use some acetone to remove that varnish - it goes through the wood way easier now.

Paul! You have saved me during difficult times with your videos! Please keep up the good work and the love for the craft! best regards.

Your commitment to helping me so much in woodworking is awesome

I’ve been searching for a rip cut saw for a long time with no success. Thank you so much for sharing this.

Dear Paul! Just hand cut my first really fitting moritise/tenon using your videos & technique. It is really rewardig seeing a simple piece of wood shaped to your own imagination. Up to now I did some furniture in my house mostly with screws or dowels. I'll do our coffee table with more traditional joinery. Thank you, thank you, thank you for all the inspiration. All the Best.

As a novice diy woodworker I have had some confusion of this subject. But thanks to you for expaining it with so clearly. And the closeups also helps a lot. Thanks again Paul. You are the best 👍

Paul, I like very much your videos showing simple and low cost solutions and the simple techniques to improve them. You got me into using the axe and carving a spoon. A vice instead of clamps will be the next steps. A lot of respect and thanks from Switzerland.

Very grateful, sir. It is always a pleasure to learn from you. It is definitely a privilege to have your knowledge. A greeting from Barcelona, Mr. Sellers.

As always it was an excellent demonstration and teaching. I just bought a handsaw from a Sheffield saw maker, they claim to be the last English saw makers. This video clip is going to be very useful. Thank you Paul Seller for your service to craftsmanship.

I learn more from you then anyone else. Thank you sir. You're a pleasure to watch.

just when I think I couldn't learn something from one of your videos, you throw in a jem of wisdom! thank you sir and I'll be waiting for the next one!

Thankyou for taking the time to make those oversized visual aids. I now clearly understand the difference between the crosscut and rip tooth pattern. Thanks for the effort involved, this novice appreciates it!!!

Thank you so much for such an in-depth video on those saws. Very helpful as always.

Paul, you have the gift of being able to explain calmly and clearly complicated things. It is so nice to listen to your narrative. I would like to know how you feel about modern saws with 'hardened" (blue) teeth. Can they be sharpened or should they be tossed on the scrap heap once they are dull?

Thank you for adding this to the information out there, great examples of wisdom beginners dismiss by rushing but then don't know where to go when they do realize the mistake.

I've just filed an old S and J following this video and am over the moon with the result. It's a good feeling to know I'm not forced to buy a new saw every time many thanks.

Thank you so much for these types of reviews of more economical tools!

Thank you Paul I ordered the spear&jackson yesterday and today i found this Video Iam Happy to see that my decision wasnt bad Greats from Germany

I never had a handle on the difference between Cross and Rip before this video. Subscribed.

Thank you, Paul! This is a lesson to be learnt by me. Essential basics to coping with handsaws.

This was so informative and helpful, Paul. Thank you!

Paul, love the videos! I have only sharpened a handful of saws in my lifetime but I feel compelled to offer a tip to a veteran such as yourself only in the hope it may be of use. If you get an old magic marker and run it down the top edge of the teeth lightly you should never miss a tooth again for rip cuts. For crosscuts, as the teeth are set first to one side and then the other, you can mark every other tooth by running marker down the side touching only the back of the teeth set on that side. Repeat on other side and it will mark the teeth set opposite. Thanks for sharing!

Three cheers for the Saw Whisperer. I suppose the 5 dislikes are people who have an overstock of hand made saws.

@tonyy5482

6 жыл бұрын

:D And envious, competing, woodworking video makers perhaps?

Interesting video Paul, thanks for sharing!

@drthunder8827

6 жыл бұрын

Bert de Weert I was actually just wondering why your videos aren't longer like these

I very much appreciate your explanations,precise and easy to understand. In one episode,I noticed what looks to be a book shelf in the background. This is something that I have been looking for. I am wondering if it's possible to share or purchase the plans? You make it a joy to watch your videos,and showing how any one can make hand tools and maintain what we use,to get the best results. Thank you very much.

Thanks for another great detailed video Paul.

I’m not planning on sharpening a hand saw any time soon. However, I learned a lot about saw teeth and the differences between rip cut and cross cut saws. Never knew the blade is tapered from top to bottom. Another great learning tool experience. Thanks!

@bighands69

3 жыл бұрын

Get into the habbit of filing and sharpening them.

A good video. I like the continuous presentation style and real-time teeth sharpening.

I was looking for a sharpen-able saw and saw the S&J which seemed to fit the bill but I wanted to be sure before I actually ordered it since I couldn't see it in person first. This video cemented my decision, I've bought just one for now and will use it as it comes and then at a later date I'll buy a 2nd one and do the rip modifications. Sounds like it's a solid tool that I'll be using for a long time. Thanks for the great video, as always!

And that's why I love your videos Paul :) Thank you

This is GREAT. Thank you Paul. I love this channel.

Thanks Paul, I have learned so much from you!

Hi Paul, great video again thanks for uploading. if you're ever running out of ideas for a video I'd love to see a demo of all of those handmade planes that are above your left shoulder on the video. loved the video you did on your spill plane, would be great to see the rest of them.

What a great video Paul! Thanks!

Hi there from Portugal, Another great video, and I love all of them :D Thanks Master PSellsers

Paul, thank you, my confidence & learning builds with each video watched. Looking at the high end saw in the video, the toe end top of the plate has been shaped differently, does this serve purpose or is it just fancy design ?

Great video, thanks Paul! Is any triangular file suitable for the sharpening or does it have to be a special saw sharpening file? I know the latter are sold at some specialist stores, the former in any hardware store and cheaper, too. Thanks, Bjorn

Hello Mr. Sellers, I'm a woodworking mastercraft subscriber and love your lessons and tutelage. I'm wondering if you have done a video or could do a video on restoring an old rusty hand saw like you did with the hand plane restoration. Would be very useful. Thank you.

In the local hardware stores around here, the rip cut saw is totally absent. Everybody concentrates on selling throw-away junk for sawing two-by-fours with nails and concrete in them for house construction. Getting a quality tool is hard, it's either from online or second hand.

@hankrearden20

7 жыл бұрын

apinakapinastorba But that is why I love these videos, and feel that they are so vital for the continuation of the tradtion. Paul is showing you how to convert a run of the mill commercial saw to whatever you need or want. When I worked in construction as a framer, I always heard this old saw "Be smarter than the wood", or something similar; and what he is teaching is something that I'm lacking. The knowhow to overcome our modern day commercial driven carbon copy drek. Which makes me wonder if he has made any of his own saws in his youth?

@andrewcady9443

6 жыл бұрын

The rip saws will be found, in circular form, 10" diameter.

@whitacrebespoke

6 жыл бұрын

Not knowing where you are in the world it’s difficult to advise but look out these spear and Jackson ones. If not look at Flynn and garlick saws from Sheffield or bad axe tool works. Avoid these lie Neilson saws they are not what they want you to think they are far far to thin and wander in the cut

@VestigialHead

5 жыл бұрын

@@whitacrebespoke Interesting about the Lie Nielsons. I always linked them with quality - their marketing is good. Is it just their saws to avoid or is all their gear a bit Meh?

@whitacrebespoke

5 жыл бұрын

Kutulue mostly just the saws the plates are far far to thin they say it will follow its own line and it’s operator error it it won’t cut straight. I brought a back saw and took it back as every time it will follow the grain and the plate bends to follow. The planes are good quality. Although I don’t like the dovetail marker much either

great show, so much information.........

Great video Paul. Just the sort of advice novice woodworkers need. Me, being from Sheffield, find it a bit sad that the Spear and Jackson saw was made in Taiwan, but such is the way of the world now. It would be nice to see a similar video comparing back saws.

@agungsuherman9515

2 жыл бұрын

spear & jackson very good hand saw, but stanley fatmax is the best forever 👍

The Spear and Jackson saw is currently $109.99 on Amazon here in the US...great video Paul, trhanks.

Great info as always! Thank you.

Thanks Paul, I learned a lot, always wondered what caused the saw to vibrate on the pull stroke .do you think vibration is mostly human error??

Thanks Paul for another great lesson :)

Thanks for taking the time to make the video. Where do I buy years of experience?

@tonyennis3008

5 жыл бұрын

They're free!

I really like your videos. They're so informative yet so simple to understand. I bought a bunch of hand tools at an estate sale a few years ago. The hand saws are duller than a Meril Streep movie. I've been meaning to sharpen them .. along with my grandpa's saws, my dad's saws, my uncle's saws and a few others.. lol I'm curious though. Why was there a notch missing from the tip of one of those new saws? One of mine has the same notch and I thought the guy I got it from needed a small strip of tool steel, maybe for cutting threads on dowels.. but now I'm stumped.. what's the purpose of the notch?

the video really looks fantastic. great info as well

Thanks for the video, and thank you for demostrate that not all time de more expensive tools are much better than a cheapest.

Thank you very much for the thorough explanation. Do you have experience with japanese saws? I will certainly want to know you opinion about them. Have a good one!

Excellent as always ... love your videos

You make great woodwork teacher Mr sellers.

paul , you have more planes than ryanair

thank you paul, always like your films, all best andrew

Cheap induction hardened saws have their place in any woodworkers toolkit. They are ideal for keeping in the back of the car, or for first cuts on reclaimed timbers... As for IH saws being un-resharpenable, well, that's both true & untrue. Sure, you can't resharpen the original tooth pattern, but the rest of the blade can be cut & sharpened quite easily. What you need is a couple of lengths of angle iron, a big vise, and a metal scoring knife (I make mine from hardwood offcuts & old hacksaw blades). Clamp the saw between the pieces of angle iron, teeth up, with roughly 1/4" of clear blade showing. Score the sawblade several times with the scoring knife, using the edge of the angle iron as a straightedge. (The trick is getting behind the hardened edge, but you'll easily be able to see if you're hitting the hardening with the scoring knife - if you are, reclamp with slightly more of the sawblade showing & re-score.) Using pliers, flex the scored blade back & forth until the old cutting edge breaks off. Clean up the new edge with a file. Hey-Presto, you now have a blank saw blade, ideal for practicing your saw sharpening skills on. Better to practice on a cheap blade that would otherwise be binned, than on your more valued workshop saws... BE SURE TO WEAR SAFETY EQUIPMENT - Leather gloves & safety glasses people!

@normiewho

4 жыл бұрын

You could also use a diamond file, they aren't as expensive as they used to be, but quality still costs money and the real cheap one are not worth buying.

Excellent tutorial.

This is unbelievably helpful.

Paul, Do you ever use the japanese-style pull cut saws?

Used to keep hedgehogs for pets but always released them in the wild after a while. They always did a weird burp after i fed them crepes. They loved crepes.😀

I like you , sir , you are so good in lecturing , I like being so clear , and calm . I remember every word you say though my mother tongue is Arabic , thank you , gentleman .

I love using my $30 Japanese saw, but I hate the idea of just throwing away an old blade. Thanks for the sharpening lesson. I think the next saw I get will be one I can sharpen.

Paul, do you ever use a diamond stone on your saws? or just a file?

Most informative as usual.

Thank-you, Paul!

excellent as always!

@rooseveltthompson8026

6 жыл бұрын

SkillCult n Sharpening lkjhgffdddss

Very good Paul thank you.

The audio and visual are both very sharp and clear! Have you changed cameras?

@Paul.Sellers

8 жыл бұрын

No.

@mooncabbagere

8 жыл бұрын

+Nathan Tonning I think this might have been filmed in the new shop. The lighting is far and away better than ever before.

@awldune

8 жыл бұрын

+Nathan Tonning It does look outstanding.

@newinspiration2108

8 жыл бұрын

+Nathan Tonning his new shop is all that matter, there are new lighting and new space, more importantly, new atmosphere, hence the better image quality

@MosquitoMade

8 жыл бұрын

+Nathan Tonning Weirdly I was thinking the same thing too. Looks great now

So helpful, thank you

If you wanted to replace the rivets with proper saw nuts, how do you remove the existing rivets?

+Paul Sellers I have to rewatch to check if it was mentioned, but is there any insight(adage) on when|why to upgrade to a more expensive saw if all you've ever known is cheap stuff?

Thanks for another great video

You remind me of the guy who taught me James Price, we gave him shit as a class but we all respected and listened to him because he couldn't be beaten in skill, he actually also taught my father when he was in college.

you are an angel master paul. thank you so much

Thank you friend 😀

Can you do cheap vs expensive vs vintage handsaws?

Muy bien Paul me has enseñado mucho !!!

great video. Very interesting for beginners like myself ^^ Especially because i need to buy a saw. Seeing all the different kinds of saw in the store, i felt really lost and bought nothing. :D

@bighands69

3 жыл бұрын

Understand the teeth and you can then choose the saw for your purpose.

I am about to convert a 8 ppi crosscut saw into a rip saw but I wonder: the crosscut saw has some rake to it and I am concerned that the rake will cause some problem if I only file across while following the (raked) gullet. Do you think I can treat the saw just like Paul did or should I try to eliminate the rake as well? Thankfull for help

Does the set matter going from what I assume is a wider set cross cut to a mildly set rip

any advise on purchasing your first router plane?

Even if I could afford that LN, I deserve the S&J more for what I will ever be able to do with hand tools. Sadly, the less expensive saws are not as easy to come by in the states. I did find some nice vintage saws but getting my sharpening skills up to snuff is not all that easy after leaving that for 40 years. Thanks for posting this!

@bighands69

3 жыл бұрын

I would suggest if you can afford it buy some good tools. S&j are a good beginners tool.

top notch instruction

On a side topic it would be awesome if they would make blades for sawzalls that are wide like handsaws

I bought the 24 inch 9515K to try. It's OK for cross cut but not so great for rip cuts. I am debating whether to invest in refiling it and then trying again. I will point out though, that my blade measures 1.0mm thick, pretty consistently throughout, and that matches the spec sheet on the S&J website. Maybe it has changed since this video where Paul measured it at 0.81-0.85 mm? 25% difference.

Thank you!💜

Thank you very much for the video. And...how about to convert a rip cut saw into crosscut? Is that possible and so straightforward?

@Paul.Sellers

6 жыл бұрын

Both these saws come as crosscut saws and we resharpen them as rip cuts but you can go both ways once you reach a certain skill level.

Could that bit of vibration with the S&J be caused by the varnish on it? That must have some effect…

Great video Paul, much appreciated. Any chance you could make one to show us lesser mortals how to cut square and true? Not so much across the width of the timber, a knife wall solves that issue - I mean when you cut down into the timber. I guess practice is the answer, but is it the only answer?

@adamlynch4607

8 жыл бұрын

The saw can be a big issue to excessive set or set to much on one side will cause wandering issues. Once you have a decent correctly set saw it then come down to practice. Like any tool a saw will try to follow the grain so it's just a case of keeping it cutting true with your hand placement.

13:24 They dictate to you what you can buy and don't really give you what you really need. Amazing as usual.

@ericerdelyi9881

5 жыл бұрын

Rip se Qw

Aren't rip cut saws more accurate when ripping though? I feel like they may be able to stay straight line cut more reliably than if you use a saw with crosscut teeth or with "universal" teeth

I do remember in a previous video you used a Dimond file on the saw. if you used it on this would it have made a difference? I am working with several different handsaws I purchased new and used. I am trying to get a better idea of what I need in the shop. I have saws ranging from 8" to 28" and at least 2 of each size. should I go through the process of making sure one is set to rip and the other is set to crosscut? Is it only for the larger size of 24 and up? should I have a bow saw set for both? Sorry for so many questions.

@Paul.Sellers

6 жыл бұрын

Generally, I don’t use diamond abrasives for saw sharpening because technically they cannot produce the same surface you get from a standard file. I have used a diamond file to put a micro bevel on the back edge of saw teeth to increase the length of sharpness but this doesn’t need to happen generally. It’s just an alternative sharpening method.

Paul. You are the man!

Although an obsessive woodworker I am also a builder for a living, and as such use hard point saws all the time. I use the spear and Jackson predator saws and when new they are unbelievably sharp and cut an absolute dream. ( cross cutting more so than ripping, and now I know why) My question is, having never used a traditional saw, is a freshly sharpened traditional saw as sharp, as a good quality hard point saw ?

@danoi99

Жыл бұрын

Yep

What would be a good budget option for usa?

Thanks Paul I learned a few new tricks today ! I have some old Sandvik hand saws and the blades have a slight curve . The teeth edges are not a straight edge. I hope I explained that right. Why is the bottom of the blade curved and what is this called?

@Paul.Sellers

5 жыл бұрын

I guess you mean the back of the blade. This is called a skew and the saw is called a skew-backed saw. The reason for it is that it makes the saw easier to steer in the cut. A slight bend along the blade usually does not affect the saw but you can bend it quite hard in the opposite way and often this is enough to straighten it. The teeth if they are not even will need jointing or topping. This is using a flat file to straighten them which means the teeth have to be filed to the new level too. Not an easy task for a novice.

@fredericb

3 жыл бұрын

Not to contradict Paul, but if you mean the teeth edge, it’s called a Breasted Toothline. A breasted saw is supposed to make the use of the saw more comfortable for long sawing sessions, since it suits better to the natural swing of the arm when it comes to full length strokes.

Are these tempered? Could you re saw a cheap home depo type saw