No video
GY6 Ruckus rear disk brake kit [HOW TO]
Disk brake kit:
www.rollingwre...
Engine stand:
www.rollingwre...
Become a Rolling Wrench member:
/ @rollingwrench
Do you have a GY6 in your ruckus and want upgrade the rear brakes in a major way? This is the kit! this rear disk brake kit for the gy6 will give you about 5 times the stopping power. no more sloppy cable drum brakes.
Пікірлер: 58
Perfect kit design and great instruction video.
Like your vids man!!! but can you do some vids about the 139QMB so people like me can learn more about that engine.
@scootersonlyrepair6773
Жыл бұрын
It's the same engine just 49cc
Hey bro. Does this fit the maddog icebear 150 cc 2015 ? I love the look I want it
Would love to see this for a 50cc!
@Bert439
3 жыл бұрын
Dual disk on a 50cc does not make sense, still it sounds cool.
Why you use imperial on a metric engine? Is the lug nuts and nuts/bolts in this set metric or imperial?
Is there any chance that this setup should be used with a standard Vento 13 inch rim
Thank you. I have XS1P52QMI Sym crox 125cc Can i Chang to brake disk Waiting answer please
I so much learn from you thankyou so march
@RollingWrench
3 жыл бұрын
Thank you for the support 🙏🏻💯
Is there also a hub for an Aprilia scooter??? so that i can fit a wider 13"wheel....
Is there another way without changing the Wheel ?
i would love to know about the wheel and the hub , the wheel is like have 4 bolt nuts.
What do I do when the caliper hits the bolts on my 2 piece wheels?
Hello do you have for Zuma 125
Hows the price for a unit
Can you please do it with 10 inch wheels
@RollingWrench
3 жыл бұрын
Not enough room ;-(
Is there amy way to put a disk kit on a gy6 139qmb ?
Should’ve gotten the low stretch swap instead of the OEM look. Oh well Revino it is now!
Why is the bleed valve at the bottom of the caliper? that's gonna make it harder to bleed air bubbles out, since they like to float. Otherwise, great kit.
@RollingWrench
3 жыл бұрын
You can switch it no problem. There is a bleed hole on both sides :-)
Hi rolling wrench
@RollingWrench
3 жыл бұрын
Hey Roy! How are you man!
@roywalls5595
3 жыл бұрын
@@RollingWrench I been updated video camera gopro hero 5 black on cellphone! I order sugru glue for chin mount!
Exist a kit like this for zuma 50?
I need one
Can this kit be fitted on a 2018 150 vespa primavera?
@RollingWrench
2 жыл бұрын
No :-(
And what is the diameter of the disk? 200 or 220mm?
@RollingWrench
Жыл бұрын
220
Will this work on a 84 Honda aero nh125?
Love to have agive aways
Won't work with 10 inch? bummer.
Hello. Where do you buy a caliper mount for a moto GY-6?
@RollingWrench
Жыл бұрын
www.rollingwrenchdenver.com
What is a good site to get a 50cc long case engine Amazon apparently doesn't have any
@RollingWrench
3 жыл бұрын
Email us. We can get you one. www.rollingwrenchdenver.com
has my speedfight 3 125cc got a GY6 engine? and is there any mods i can do to make more powerful?
@RollingWrench
3 жыл бұрын
I’m unsure about that model of scooter. If it has a gy6 no problem
Isn’t the bleeder supported to be on the top side of a caliper ?
@asahall7046
3 жыл бұрын
Yes, Ive been burned by that on a disc brake swap before. I had to unbolt and roll around the rotor to bleed. Then re-mount. No big deal really
@RollingWrench
3 жыл бұрын
That caliper has a movable bleeder. But yes, you are correct
Do that make a it for a zuma
@RollingWrench
3 жыл бұрын
Not to my knowledge
Well I have a Genuine Venture. It already had a rear disc setup (with 14" wheel). However, the engine is blown and I want to upgrade to a GY6 (since Genuine wants $1100 for a 49cc engine). Do you sell the kit without the caliper since I already have one? And will this kit work for the Venture? Excellent video by the way.
@austinbayse9120
2 жыл бұрын
How did you get 14" wheel in there is there really enough clearance?
@gregslair4278
2 жыл бұрын
@@austinbayse9120 It came from the factory with 14" wheels.
Sir how much the Ruscus rear break?
@RollingWrench
3 жыл бұрын
$400
Sir how much the rear set?
@RollingWrench
3 жыл бұрын
$400, link in the video description
I see on the website that this fits a 12x8 but not a 12x7. Can you explain why a narrower rim won't work?
@RollingWrench
3 жыл бұрын
The brake caliper hits the wheel with a 12x7 :-(
Nada broken GY6 then, haha
hit the dislike twice, then like. great video