Great video man- You're a pro !

@JoeysGarage

5 жыл бұрын

Thank you for the comment.

@arrowstheorem1881

5 жыл бұрын

Is the excitor coil expensive ?

@pandemiccovid2643

4 жыл бұрын

I’ve followed every step but I still couldn’t figure out why I’m still not having any spark. I’ve replaced the stator, ignition coil for the spark plug the cdi box still no spark can you help me figure out the issue. Or know what’s the next thing to check thanks.

@coryoaks6388

3 жыл бұрын

Joey's Garage door open and then yes aSzzzzzàà A

@phitness2429

2 жыл бұрын

@@pandemiccovid2643 same here!!!!!!!!!!!!

Even 6 years later this video is the best on all of KZread for no spark troubleshooting. Thank you my man!

Finally... a point to point process of checking the main symptoms of electric faults. Thanks very much matey! Excellent presentation and advice!

@JoeysGarage

6 жыл бұрын

Thanks brother. One of my first videos. So many things I wish I could have done differently and better

its videos like this one that make youtube a great place to turn to for help

@luckyaffpv343

3 жыл бұрын

Amen!

I replaced every electrical component on my 49cc with no results. This video saved me! I started testing and found that the old and new spark plug wire was bad. I combined the two to make one good wire and I got spark! The scooter starts fine again!! Thank you so much for this information!

@eddietrujillo172

2 ай бұрын

How do u did that how u combine that smh

Man that was the most clearly spoken and well explained troubleshooting video I have had the pleasure to watch! Very helpful thank you

@jamiemeadows1463

4 жыл бұрын

Will the $100 sports parts get 50-60 mph out of my 2918 SSR motor sports Md 50 qt-10 scooter. I don't vhave the money if it don't work. Pm or call me at 606-612-9627

The absolute best informed video ive ever seen for checking and identifying spark problems! Congrats brother! Youre awesome and thank you for doing this free help video! You just made a huge amount of mechanics mad as HE**! I will pay it forward too!!

Amazing instructions on diy "how to" Joey! You've single handedly help me start a repair shop. I started with an old Tomberlin 150cc that was neglected for years and I brought it back to life. Now I'm working on a "DC" Hammerhead Twister GT 150 that was in a fire. I'm changing the whole setup from DC to AC. I'll keep you posted on how it's going.

Great tutorial. Very clear and informative. I have a gy6 equipped buggy that's in need of an electrical diagnosis and repair and with your guidance shared here I think I can handle it. Thank you for taking the time to help those of us less familiar with this little engine.

Excellent, been a real fix everything mechanic for 63 years and for a young man absolutely excellent.

great video joey i wish there were more people willing to help . you explain everything in great detail thank you some much got my gy6 running (bad cdi) great job thanks again

Joey - you're the absolute man. Extremely thorough and well defined every step of the way.

@joeybee1697

7 жыл бұрын

+Aaron Hill Thanks man. Do me a solid and please share the video. I need all the help I can get.

You are the man!!! I really appreciate a complete, well explained video. Thank you

I would definitely trust you working on my bike. I like how you test each part, no short cuts. Really professional. Nice vid! *_Thumbs up!_*

@JoeysGarage

8 жыл бұрын

Thanks a lot. That's really cool saying that. I tried to make it as simple as possible.

A very thorough and concise tutorial. Excellent job with diagnostic technique, and videography, totally well done! I will suggest always touch probe tips together before every continuity test to verify ohm circuit in meter.

@JoeysGarage

6 жыл бұрын

Good tip. One of my first videos. So many things could have been done better

@michaelswain8414

4 жыл бұрын

Also, for people who don't use multimeters often, DO NOT use the OHMS / RESISTANCE settings on your meter to test anything that still is in a powered circuit. The meter is not going to be expecting any outside voltage to be present when doing resistance measurements. Best case the fuse blows; if your luck is like mine then the whole $20 multimeter dies. Even God wont be able to save you if you do this to your dads Fluke... Edit: for clarity, the video showed the correct way to do this. I just want to add emphasis for the inexperienced ones out there who might have inadvertently put 12v across the meter leads while doing a resistance test.

@michaelbearse4733

3 жыл бұрын

This is where I'm almost sure i went wrong!?! Because I tested it by doing the short circuit. But that doesn't fix the problem. Cause everything else in the electric system works! So it's obvious then! Good looking out mydude.

Love the way you explained it more than once. If you explain it like you did, it’s easier to remember when you are actually trying to figuring things out! Very helpful video.

@rogergrant2557

2 жыл бұрын

A

The best scooter fix video by far and I watched a lot of them. What I really liked is how showed the multimeter down to the proper position of the dial.

Awesome explanation bro, learn a lot from this video. Keep up the good job thanks

Extremely helpful, THANK YOU!

YOU ARE THE FIGGIN MANN! I LOVE HOW YOU BROKE DOWN EACH AND EVERY PART! GREAT JOB MAN. THANK YOU. THIS DEFINITELY ISN'T JUST THE GY6 THIS HELPS SOO MUCH OUTSIDE OF THAT EVEN. THANK YOU

Great video, easy to follow and under stand exactly what what Joey is doing! Thank you!!

you explain so well, great video

@eddiemorales1000

5 жыл бұрын

My spark plug wire keeps going and I keep changing it with same problem what could it be its a 50 cc tao tao 2017

Just a follow up, fitted new stator (after having to destroy the flywheel getting it off as it was stuck on) and once back together got spark and fired up. Again, thanks for the tutorial as I was ready to scrap it but now it's a runner. Cheers

@JoeysGarage

8 жыл бұрын

+Stu Pot Love it bruv. CHEERS MATE!!!! Share and subscribe. More is coming.

Just subscribed the other day, great video, love the multimeter insets as you go thru the steps. Good work man.

Thanks for putting this video out. You saved me.. I hadn't had my moped out for quite some time.. My oldest son is now old enough to ride it. So I took it out of storage. When starting it I had no spark so I replaced my battery and coil. Still no spark. I saw lots of videos and went through my bike thinking I MAY have to replace a lot of parts to get down to the problem. when I saw your video I didn't get pass the kill switch. I totally forgot about the kill switch.. So thanks for reminding me lol

@JoeysGarage

6 жыл бұрын

That’s awesome it help. I’m super happy it helped. Thanks for watching, and I pinned the comment to top.

Very well explained Joy 😊😊, even a layman can understand 👍👍

@JoeysGarage

5 жыл бұрын

Thanks

Hey Man, love your videos, they are easy to follow and you explain what things are and how they should work correctly. Keep up the good work, kind regards to you.

@JoeysGarage

6 жыл бұрын

Thanks for the kind words and watching. This one was one of my first

Joe , you are amazingly helpful with these instructions!! be blessed man!!

In this video, I understood how the ignition system really works, and now I can fix my scooter by this video, thanks pal, you're a certified pro

Thanks to you bro, you saved my scooter! I was about to give up, until I discovered this video. I have to say.....you did an excellent job and kept it very simple, and straight to the point. Thank you a thousand times and please continue to help people fix their scooters. I'll be ordering my stator soon.😁

@JoeysGarage

8 жыл бұрын

Rock on!!! I love seeing these kind of comments. It's the whole reason I did the episode. Don't forget to share it with others. I have new vids lined up

@Johnson1281

8 жыл бұрын

+Joey's Garage Gonna go check out your whole channel...🇺🇸

@JoeysGarage

8 жыл бұрын

Thanks man. I appreciate it.

Hey joey Great videos,keep up the good work

@JoeysGarage

6 жыл бұрын

Thank you for watching and the kind words. Share the video online; knowledge is power.

this is the best ignition troubleshooting video I have found. So easy to follow and clear. THANKS SO MUCH FOR THIS!

@JoeysGarage

5 жыл бұрын

I’m happy it help. If you can help the channel, share the like.

I can't wait until work is done so I get to go home and go through this process of troubleshooting. I'm newer to this and after beating my head into the wall over and over, this video gives me hope that I can finally figure it out. Thanks in advance!

Great video thank you for sharing you are really good with the scooters :-)

@kevinmillan1715

6 жыл бұрын

virberello i need your help with a 2008 scooter no spark

@JoeysGarage

5 жыл бұрын

Same here. I try and answer as many as I can. But with hundreds coming in, it’s hard.

you are a life saver when it comes to scooters I like that showing it helped me a lot thank you so much for your help thanks agin,,

Solid tutorial; great job! Step-by-step with no non-sense editorial in between. Keep up the good work!

55 seconds into this video I found the issue with my scooter. Almost feel cheated not having to go through the rest of your troubleshooting steps. Great vid. Thanks for the help!

amazing video,great explanation

@JoeysGarage

7 жыл бұрын

+ANACONDA AN Thanks brother.

hey man..thanks a lot..

Excellent Job Joey! Well lighted subject area & demonstration! Thank you!

This was the most outstanding instructional video dealing with spark plug troubleshooting. Thank you.

thank you for this video

Thanks a lot! Now we will attack the Chinese baby dragon in the garage with my son and fire it up with your advice. Cheers from Finland!

@JoeysGarage

6 жыл бұрын

I hope my guide helps. Thanks for watching. Cheers

@tracyburnette5452

3 жыл бұрын

This video has been very helpful to me thanks

Very good video. Easy to understand, good audio, good picture and not trying to sell something. Others could learn a lot from you. Now back to the garage for me!

Thank you! Very detailed. And very helpful. Am going to go try this step by step.will let you know how it goes!!

Hi Joey, need some advice. Bike was running great but for some stupid reason whilst it was idling I decided to disconnect the CDI (6 pin) and engine cut out. When connected back up wouldn't start so I connected another CDI I have that I know works but still wouldn't fire up as I now have no spark again. Any ideas? New stator still good as did the tests but my limited knowledge has been used up. I must have done something to electrics as it can't be a coincidence that won't fire immediately after disconnecting CDI. Thanks

@boigudgood7552

6 жыл бұрын

Same problem, did you ever figure it out

@brucebubacz7224

5 жыл бұрын

Bmx at coil wire transfer

hi joe so that needs a new stater it might ovious you cant repare the old stayter good vid thanks ian

@JoeysGarage

8 жыл бұрын

Ian, I have seen videos of people repairing starters. I tried it once and failed miserably at it. Had to buy a new one..... Thanks for watching. I hope I helped.

You are top notch sir! Knowlage is so important when dealing with these problems. Thank You!!

@JoeysGarage

6 жыл бұрын

Thank you very much for the kind words and watching. All the best.

This is a really great video. Thanks for taking the time to produce this, it is very much appreciated.

How did you end up fixing that part that was wrong on the magnets?

@barryc.768

4 жыл бұрын

Can't be fixed... You buy a new Stator... Install and simply plug it in to the existing outlet.

This may or may not be my main culprit, but I’m glad I watched the entire video as it taught me a few things. I’m a rookie and appreciate your time and generosity!

This video is great as he makes the whole process simple. I have a no spark issue with my Honda Elite scooter after a long storage time but I am going to do all these steps and who knows it may be a stator wiring problem like this one. My compression doesn't seem right but I want to find out why I have no spark first. Thank you very much!

hmm i think im gonna try these steps on my Chinese quad since its has no spark

@JoeysGarage

6 жыл бұрын

Give it a try. Steps should help you find the problem. Thanks for watching

@bryanthawks6762

3 жыл бұрын

Somebody show methe wires are butchered and I bought a new Horner's to be installedyou could send that to Bryant Bryant Hawks Hawks number 2 at gmail.comand now it would be all small Captain's all the help would be appreciated a video on how to wire a quad four-wheeler

i replaced my stator, ignition coil, spark plug ,cdi, solenoid starter and new battery and still no spark

@PeterKropotkin42069

6 жыл бұрын

How did you remove the Flywheel? If you used a hammer it could have been demagnetized.

@adiraiden

6 жыл бұрын

the same situation :))

@oplisstewart1979

6 жыл бұрын

I'd check the stop switch and or key switch.if you have short to ground it will be just like cranking with key still turned to off position

@kristi8431

6 жыл бұрын

Luis Chavarria Same thing here. Have a new auto choke/cillinoid on the way. Hopefully that does the trick.

Thanks a lot! I had the sameproblem. No grounding throughout the CDI power cable. Keep it going!

Great video! I'm familiar with testing no spark on a car but bikes have slightly different parts, etc, so this video was a great orientation for me. I'm about to help a friend with his scooter that has no spark after someone tried (unsuccessfully) to hotwire it.

I'm an idiot. I checked everything but the coil. The coil was bad, put on a spare and all sorted (till next time!!!!!!!!).

@JoeysGarage

7 жыл бұрын

+Stu Pot Love it!!! Two wheels back on the road. CHEERS!!

But you did not test the spark plug on its own!

@JoeysGarage

7 жыл бұрын

+Bob Eden Thought I did check the resistance of the plug. It's very small, but possible.

Weeeeelll done seven years later , being a mechanic I come across this video looking for wire diagram and bam job took 10 mins no tracer hook up no looking probing over and over just done , same problem staters junk! Thank you great job

Gy6 trouble shooting for dummies. Your sir deserve a medal. Saved me lots in repairs.

Thank you so much for posting such an articulate video on how and what to check! Teachers such as yourself are priceless treasures 😊

Excellent tutoriel 👍 sans comprendre l'anglais 😎 tellement c'est bien filmé et expliquer calmement. Merci chef ♥️

Thanks so much you have explained everything very well and I am very pleased of the results. My stator was damage and was cheap and easy to replace. Thank you again

Brilliant diagnostic tutorial. Fault finding like this, with a intelligent host, is always productive for myself and i believe every single person who watches clips on this level. Very good work and thank you for sharing your experience with us. Regards

@yourepicminecraft

Жыл бұрын

I forgot to mention that your video lead me to identifying my faulty on stator, and that AFTER i tested it... Great work again thanks

Clearly explained and detailed, great info on how to check the Stator, I'll put it in practice tomorrow. Thank you so much!

@klintchamberlin6996

2 жыл бұрын

I have a yardsport ys200 utv with a gy6 motor turn the key and nothing checked everything I could think of, please help

Dude.... this is EXACTLY what i needed to see... I've been having an issue with my scooter randomly breaking down. I'll check it out and let you know if i found the issue! Thank you man!!!

Thanks I've learned something, I have a BAJA 150 quad and needed to know how to test the electrical components. Take it easy Joey

Very thorough & informative on the trouble shooting process. Great video btw!

Thank you so much for your knowledge, I’ve definitely benefited from you. I’m building my own pit bike/motorized bike 🚲💨💨💨💨💨 and I’m wiring up lights brake lights etc. again thank you 👍🏿👍🏿

WOW Thank you, very informative video, going to work on mine tomorrow, no sparks. Thank you again.

Dude, in the video you were advising us about referencing which wires go where on the coil. Thank You! That was it! I feel dumb! My Hammerhead GTS 150 dune buggy WILL LIVE AGAIN!!

Probably the Best explanation for the Electric System for GY6 Scooters and scooters in general! mad respect for you!! , thanks alot :)

@JoeysGarage

5 жыл бұрын

Thanks! One of my first and most popular video. Really showed me the reward of trying to help others.

@thecoooollove

5 жыл бұрын

@@JoeysGarage it is very informative and i really learned alot from it! appreciate it brother , and keep up the good work, helping others with info always pays off

Im proud of you and thankfull for the information u delivered to everyone and the most important is that u understand what ur explaining and how and why u are able to explain in details. Great work god bless u keep good work

Thanks for a great video. I'm new to CDI's, this helps out a lot. Well explained.

Your video really helped me understand the working and identify the steps to debug my issue. Thank you.

Your methodical approach is very good.

Out of all the videos I've watched (billions) this has been the most useful (🤞hoping). gotta get back out there tomorrow and chase some more wires. Thanks for the great upload!

This is probably the best video I've seen on this subject Thank you

You are so nice to put these out.... and thorough.

Very informative, thank you for taking the time to make a video on this subject.

Awesome video. Well shown and explained. Like how you show settings on the multimeter.

THANK YOU SO MUCH THIS IS THE BEST VIDEO SUPER WELL DONE, CONGRATULATIONS THIS IS THE WAY TO MAKE A REAL VIDEO. WAY OF GO, KEEP GOING MAN

Is the best video I've ever come across easy to understand how to check the stator I have the some issues with my polaris magnum NO SPARK Thank you Legend you are the best

8 Years later, this video got me to buy a meter to test my scooter for NO spark... thanks ❤

Thank you so much for this incredibly informative video - I was able to follow your instructions and determine the issue was the ignition cable. You saved me time and money, so cool.

Ty so much for this video, I’ve been messing with a little quad with the same motor for days now. She’s up an runnin now

Nice job kid... You're very good! Great explanation of each component and how to test... I'm impressed.

Thank u Joey. Your vid helped me fix my Buddy 125. The little pulse coil or trigger coil has been falling for a long time. The really difficult thing was that the bike would run perfect. Sometimes it would hiccup after climbing a long grade. Then it would b fine for days. It would even ohm out with the meter like it was ok. I threw all the parts at it. CDI, coil and plug. I even bought an original equipment CDI from Robot’s Scooter place in San Diego. Turns out the cheap ones on Amazon work just fine. Finally the scooter pretty much quit and the pulse coil read open circuit with the meter. I replaced the stator and now it purrs like a kitten. Thanks again! In my tool kit, I will carry an extra stator. I already keep a drive belt, CDI, coil and plug. I also carry a Ryobi 1/2 impact, and a flywheel puller. It all fits under the seat and it’s super handy for trips to Pick your Part. I’m gonna check out your info on fuel injection.

Great video, thanks! You make it easy to troubleshoot a no-spark issue.

After watching a lot of videos, this is the easiest and best to follow. Thank you, bro.,

Thank you man! Amazing video,this 20 min worth too much money and experience!

Hey Joey, that's what's up brother! Thanks for sharing! The knowledge is a blessing!

Thank you. Absolutely fantastic explanation. You are definitely a fantastic instructor

Please everyone, Don’t ground ever to your carburetor. I know it maybe a small chance to blow yourself up but why risk causing a spark and having a bad! Thank you for the great video!

VERY COOL VIDEO. I AM GOING TO MMI IN PHOENIX AZ (DEER VALLEY) IN DEC 2018 AND TRYING TO ABSORB AS MUCH INFO THAT I CAN. I HAVE WORKED ON CARS IN PA. BUT NEVER BIKES SO THIS IS A NEW CHALLENGE FOR ME. THANKS...

One of the best GY6 no spark troubleshooting vids.

THANK YOU !!! ABSOLUTELY BRILLIANT - FINALLY A CLEAR ,STRAIGHT FORWARD. NO BS VIDEO ! AWESOME

Great video I had no spark and I'm new to this. Very informative

Very good tutorial. Easy step by step. Other videos assume you know how to use a multimeter in conjunction with the troubleshooting process.

i really appreciate this step by step in diagnosing no spark problem that was awesome