Looking amazing dude!!

Love the frame onto the engine rather than engine into frame 🫡

Finally someone who know how seat and Tank should be positioned on a naked bike build! Nice one!

@danpolk

5 ай бұрын

That’s how the gs750 is made.

Very nice build 👌🏼 it’s a great feeling seeing everything come together.

looks cool. hope it rides well

THE BEST AWESOME PERFECT AMAZING WORK.....😁👌👍

Very clean and really shows why we sometimes say less is more

Your are so focused so concentrated into assembling this GS750 perfectly! Amazing!

20 years and I never thought to fit the frame to the engine. I am feeling dumb as.

@dougbloom3672

Ай бұрын

I was just marveling over this technique myself. 🤔

I couldn’t help but smile when you rolled that front wheel between those forks to install it … and then seeing it all together 😍 Looks fantastic! Great job!

simply stunning - great work

I just saw a running 1976 GL1000 for sale for peanuts. I smell a café racer project.

Super looking bike. Concerned I didn’t see a torque wrench used once though 😮.

Awesome video! I'm putting these same forks on my SV650 now. Those wheels are awesome. Nice bike!

I am completely in awe. Incredible job.

Gorgeously gorgeous gorgeous bike love that clean look I was waiting for this final assembly and now can't wait for you to ride it the first time however I got an idea if you wanna see it works I think if you throw a tiny fender on the rear wheel it will look awesome but I love this build anyways and also nobody had to see your face when you turned the power on first time we all heard the joy in your voice instantly Congrats on this beautiful build again.

A very comprehensive assembly video thanks. Very jealous of your garage and tools,makes mine look shabby. Great stuff will subscribe.

Wow, bike looks great! Love the rims.

Just subscribed. Lovely work, minimum of narration (ASMR). Calming, informative, enjoyable. Thank you. I build 1/12 bikes. Yours is terrific!

That looks sick, very much like a ccm with a single sided swing arm and a hefty four cylinder, great work 👍✊

yo this bike looks mad!

Bravi bel lavoro complimenti

Excellent work 👌

If i were to chose this over a brand new bike...i would still choose this. Realy nice project

Great job so far,,looks awesome

Very beautiful looking bike 👍

Very nice

Stunning!!

been watching since day 1, cant wait for the test ride video

Nice shop!

👍👍 Beautiful

what a badass build you killed it!!!

So clean, instrument panel is stealth tek😁 hidden battery, you can see the carbs, the rear shock looks good. the offset rim with brakes inside is great, you are good at this.

Can't wait for see it on the road❤

Ficou linda! 👍🏼

Sweet

Exellent, thanks

Looks great

Nice build.

I love motocycle, nice....good luck and sucses for your konten creator👏👏👍👍👍

Damn 😮

Nice Custom, so Yeah!

Gravity: **Surprised Pikachu Face** So simple, yet that wouldn't have crossed my mind if I was the one to assemble it. 👍

Fantastica!

Gonna do any motovlogs on this epic machine.

looks sweet, just picked up a 99 gsxr750 parts bike so I can pull the front end and swing arm off for my 80 gs750 doubt its gonna come out anywhere as good as this but I'm looking forward to the project it's gonna be.

A work of art. Beautiful

awesome machine you have created, really enjoyed watchin the build, congrats fella

Very cool, try to balance your bike. With a straight touring handle bar you will seat more upright and it´s perfect for hill climp and to feel front and rear tire grip. Beautifull motorcycle😍😍😍

Slick, the frame looks skinny in my eyes, but still a beautiful build.

Amaze...

i'd suggest you to change up the seat it doesn't sit well with everything.. other than that the bike is just simply fabulous the color and contrast of the wheels are insane same goes for the wiring as whole...damn man you did great

I haven't watched your videos in a long time... I hope you will always be successful in the future

Bad AF bro!

u r amazing..

Hola saludos desde Chile!!! Genial trabajo Y me gustaría saber... ¿En cuanto esta evaluado el trabajo y la Motocicleta con el resultado final? Sigan así Da gusto ver sus trabajos

Crisp 👍🤞👊🏼

Sick! 👍👍🎉🎉🎉🎉🤘🏻🤘🏻

It's the 10 Crack commandments

Awsome

Such a brill classic looking bike , next build gsxr 1100 motor, or k1 gsxr1000,. Then it will go as well as it looks .

Looks clean,brutal,pur and sexy😊

Big enough motor?

How do those short intake manifolds perform? Longer would give you more torque from what I understand

👍

Beautifuk build! Inlove the carbed 4 cylinder❤ did u say the forks were powdercoated? I was thinking about serakote?

Nice clean build, did I hear you say: 'points' ! Electronic ignition sourly?

Nice one sir o need help for my gs 650g parts head

What kind of wheels are those? Looks cool 😎

That is Art right there! 😎🤝 And what carbs are those if you don’t mind me asking please

@Benji...

11 ай бұрын

Keihin CR Racing

Fastis in '76'!

Прекрасная работа! Только я не понял, в чём смысл микро крыла на переднем колесе, от чего оно защищает?!

Are you worried about heat issues with the reg/rec installed above the engine? Amazing work bro

@Benji...

11 ай бұрын

a little but i’ll have to see. gsxr’s have them right next to the radiator so this can’t be any worse

Gidday from Australia great work mate but i think your front wheel mud guard is to close to the tire if you get a rock stuck could puncture your tire

@Benji...

Жыл бұрын

You may be right there we'll see how it runs. I may have to re-visit and raise it a bit

Beautiful work BTW your front tyre is in the wrong direction

@Benji...

11 ай бұрын

you made me second guess myself, but tire direction is correct here 👍

Hi, I really enjoyed this video, what headlight did you use on this build?, please let me know, I love it, thanks

@Benji...

10 ай бұрын

Headlight is from purpose built moto

So you put a diode going into a "light emitting diode"?

What kind of mono shock that you used?

I wish I knew how to do this. I dont even know here to start

Wait does that swing arm just fit perfectly onto the frame or did you have to fab something

@Benji...

3 ай бұрын

I wish, had to make it about an inch wider to make it fit

I wonder if a Yamaha tracer 700 can converted to a motorcycle like Yamaha tenere?

Hi mate I’m interested in the build can you send me some info on your bits like wiring and digital with this please whatever you’ve got I’m really happy that you’ve got that thank you

El velocimetro donde lo puedo comprar bro?

Not a single torque loading applied?

@Benji...

3 ай бұрын

what is this torque loading? :)

What rims / wheel did you use on this bike ? May i know ? Thanks

@Benji...

9 ай бұрын

wheels are Jonich

How much?

friends how much does it cost for 1 GS750 motor

Exhaust?

Ummm not sure if it's was just in the editing but I hope you packed them bearings better that the video shows.

@Benji...

11 ай бұрын

yes bearings are packed well 👍

@thomashayden4522

11 ай бұрын

Killer bike !

what kind of battery you use on the bike，the battery size is so small ，i need a same one on my bike，she need a clean shape

@Benji...

Жыл бұрын

battery is an anti-gravity lithium ion

Great build!! But if you grease wheel bearings like you greased the neck tube bearings your wheels would fall off!!!😂 smearing grease on a bearing is not sufficient! They need to be packed.. you can do it by hand just watch a video or get a packer that works with a grease gun….

What gauge is that?

@Benji...

6 ай бұрын

Gauge is from motogadget

bro .i have a advise for u ..why dont u try old ducati 748 exhaust setup...u have to mod it..but it will suite your swingarm too.....i know u have already something on your mind for this...but just saying..

@Benji...

Жыл бұрын

I like the twin pipes coming up the side and may do something like that, I'd probably make it a shorty though

@suchet25

Жыл бұрын

@@Benji... .only real petroheads know when a bike starts talking...she wants something gnarly now...

@suchet25

Жыл бұрын

and break some lines ..dont go traditional cafe racer..it will be unique .

What cute old analog speedometers. Thank goodness my bike still has them. The bike is beautiful, aesthetically beautiful. I wouldn't have put anything digital at all. That's for today's terrible factory bikes

where is battery ?

@Benji...

9 ай бұрын

I hid it under where the swing arm mounts to the frame. Good to know you can't see it!

@AZ-qn3xq

9 ай бұрын

@@Benji... looks great! But what battery do you use? It should be small size

You look freakishly like a guy i deployed with.

I don’t understand why professional people don’t use simple zip-lock bags to pack bearings with grease🤔 Easier, less messy & go from bag the position without a drop anywhere except in the bag😉😎

20 yrs? It’s still a piece o crap dude.

Hope you didn’t spend a lot of money😂. Looks like a stripped down piece o crap that no sane person would ride on a regular basis😳. Seriously?

If you do not now what it means to "do the ton" you should not be allowed to own a "cafe racer"