New DreamView G1 Gaming Light vs T1 Pro TV model: kzread.info/dash/bejne/gpNh3KyodZuvZZs.html

For anybody recently purchasing the dreamview P1 bars. I just set mine up yesterday and I noticed the same issue with the colors displaying as mostly red and pinks when my screen was actually displaying darker or cooler tones. I mostly fixed this issue by adjusting the white balance setting in the app. Play around with this setting as it will be different for each display. The default setting was set to the warmest setting. I actually had to set mine to the coolest setting. Seemed counter intuitive but it appears to have fixed the issue so far. Hope this helps!

@Kayoshu999

Жыл бұрын

Thanks I just bought mines

@GreeKurdChannelMilan

9 ай бұрын

Does it have the same problem now? or has there been any update patch to fix it?

I've been searching for this EXACT video for a week or so. THANK YOU for making this video! Your review style is top-tier and deserves to be recognized. Keep it up!

@MrTekSuggest

3 жыл бұрын

Much appreciated! I’m glad it was helpful!

@allenlejeune3303

3 жыл бұрын

@@MrTekSuggest Or you can just cut some pieces of the led strip to make it smaller 😬 😬 😬

@MrTekSuggest

2 жыл бұрын

Make sure to check out my latest upload of the Strip and Bar combo!

Thanks for this fantastic review of these lightbars! I've been looking at different options, and your overview is hands down the best on youtube. You've not only gone into the details of installing them but also went further to provide helpful tips that really actually, well, help. Looking forward to your other videos!

You are an example of an awesome KZread creator. Good timing, mixing and plain clear dialogue and explanations made it much better than anything else available on KZread about this product line. Keep on doing the great job!

Thank you for the video, I’ve wish they had the strips for smaller tvs but now that I’ve seen this I think the bars should be just fine

I just got the immersion kit! This helped me ton!. Thank you!

@MrTekSuggest

3 жыл бұрын

Awesome! Glad to hear it helped out!

Wow, amazing video. You cover all the bases and then some. Thank you so much for this!

@MrTekSuggest

3 жыл бұрын

Appreciate it! Glad it was helpful!

Thank you for info on a gift I purchased for my friend. Helped him install today. Just sent your vids for the best settings. Waiting for night time to see the results since his tv is by a glass door LOL

Watched this after buying the strip to see if I wanted the bars and your video made me 100% confident in my decision! Keep up the great work bro :)

@MrTekSuggest

3 жыл бұрын

Awesome, love hearing when my reviews help buying decisions!

The way you go over the pieces and capabilities is so awesome, can't express enough how excited I am when I see that you have a video for a piece of hardware that I'm interested in.

Glad I decided to rewatch this! Just got the flow pro and I already have the immersion, definitely need to recalibrate. Thank you for the tips!

@MrTekSuggest

3 жыл бұрын

You bet!

@patrickyeary

3 жыл бұрын

@@MrTekSuggest can I ask you something? What do you keep your brightness/saturation levels at for either product?

@MrTekSuggest

3 жыл бұрын

@@patrickyeary strip brightness=70/saturation about 15%. Bar brightness I keep below 20% when using with the strips so they don’t wash them out. Saturation about 15% as well

@patrickyeary

3 жыл бұрын

@@MrTekSuggest thank you! That’s close to how I had mine set up

Glad I watched this as I was just about to purchase the bars but didn't realise they did split the colours on video mode. Maybe a software update will fix it... Thanks for a great review

Awesome detail. GREAT production. Thank you. I had questions. I don't know. Thanks. Sharing this.

@MrTekSuggest

3 жыл бұрын

Appreciate it!

I use my AmbiVision for two years, and now I can not imagine watching TV without it. I have just bought the second TV and waiting for the new AmbiVision kit. It's awesome 👍 🤩

@MrTekSuggest

3 жыл бұрын

Nice what iOS are you using for your TV?

@kakamistrz1990

2 жыл бұрын

@@MrTekSuggest as I know AmbiVision's does not care about OS - it captures screen by fast camera. It is good idea to test it on the channel, as they are with this technology for 3 years already and looks much better than govee.

Super in depth review. Thank you! I was considering getting these last week for the back of my monitors to prevent eye strain, but ended up getting the Hue Play bars instead because there wasn't enough information on these, yet. Although, I'm really happy with my decision these would have worked for my purposes especially now that I know they provide good warm and cool whites.

@MrTekSuggest

3 жыл бұрын

Super! Glad that you enjoyed!

This is awesome. Thank you soooo much.

Thanks for your great reviews, always clear & concise! The Immersion is finally available in the UK. Do you know how far the camera sticks out? I need to see if it will fit behind a soundbar.

@MrTekSuggest

3 жыл бұрын

You bet, and that is awesome. FINALLY! The camera protrudes about 4" inches outward from the TV

Great video. I appreciate the detail and of course the pro tips. I just found your channel. I subbed.

@MrTekSuggest

3 жыл бұрын

Awesome, glad it was helpful!

Great review and insights - thank you!

@MrTekSuggest

2 жыл бұрын

I appreciate it!

Yeah good point about splitting that color signal. We can manually do it, wish the video modes had it as well. Perhaps it doesnt have the power to it live?

Melhor vídeo que encontrei sobre o assunto até o momento! Parabéns pela explicação e honestidade da opinião!!! 👏

@MrTekSuggest

3 жыл бұрын

Eu agradeço! Obrigado por apoiar!

I didn't know they had light bars!! Ordering them now! Going to have both on my tv for the ultimate experience

@MrTekSuggest

3 жыл бұрын

Haha, very nice!

@MrTekSuggest

3 жыл бұрын

@sw3d3r 2 cams are unfortunately required for the dual set up. Tutorial here: kzread.info/dash/bejne/g42hp7J8cZXcl7Q.html

@RememberingEverything90s

3 жыл бұрын

You don't even notice them. To be honest. I love the Govee lights. I have them on all my tvs!!

@RememberingEverything90s

3 жыл бұрын

@sw3d3r yup. One for the immersion and one for the flow bars. I love it. Getting flow bars for the bedroom tv next. I love that the whole wall lights up now

Guess I’ll have to give the immersion kit a try, really wish they had a dedicated option for 70”+ TVs. Hopefully the birghtness of the LEDs is enough to give the same effect on larger TVs

@MrTekSuggest

3 жыл бұрын

It’s definitely worth a shot. They’re a ton but of fun!

@iceman62509

2 жыл бұрын

They have one now. And I’m doing my research on it.

@iceman62509

2 жыл бұрын

@@MrTekSuggest question for you . Durability.. you made this video 9 months ago. Is your lights still working perfectly ? I’m thinking about going with the immersion strip kit for my 77 inch oled.

Your voice reminds me of Greg Eagles (voice actor, metal gear solid and others) which is a great thing kept me engaged and nothing was too much or not enough. Great review

@MrTekSuggest

3 жыл бұрын

Much appreciated! Glad you enjoyed! I’m not super familiar, so now I have to look him up haha!

gonna try the light bars and the immersion leds behind my 75 inch tv like youve suggested here. Im from Australia so having to use an american power adaptor but none the less im fkn excited! thanks for the videos bro

@MrTekSuggest

3 жыл бұрын

Hey mate, greetings! Lmk how this goes. Definitely check out this video here for a camera hack to manage the 2 cams kzread.info/dash/bejne/eoiis9SMoLTfZqQ.html

Fantastic side by side comparison 👏

Again fantastic thanks for the recommendation to this video, what camera/settings do you use to record sub good quality videos with both the TV brightness and the dark backgrounds... it looks stunning

@MrTekSuggest

2 жыл бұрын

Hey man I appreciate it. I shoot a lot with a Sony A6400 using sigma lenses. I do not use picture profiles very much, as I feel like I get a less natural looking image that needs more adjustment in post. In low light I generally shoot with a very low f-stop 1.8-2.0 roughly

Another great video. So glad I stumbled upon your channel. I seriously suffer from review fatigue and usually tune out at some point during many lengthy review videos, but yours keep my attention throughout and I come away with more clarity and memorable information rather than more confusion and being further paralyzed by indecision. Keep it up, my dood! 👊🏾💪🏾🥷🏾 (**sorry, corrected some spelling mistakes because I suck at cellular telephones.**)

@MrTekSuggest

3 жыл бұрын

RESPECT 👊🏽

Great video? I love the color changing ideas for movies and etc. how does this work with music. Is there a music sync options for like karaoke and etc? Another note - is the flow bar issue with them syncing the same color still an issue? At the time of this video, if one want. Other the flow bar and backlit, do I still need separate cameras?

Awesome review! The previous immersion kit I had from Govee I returned, because white was shown as pink and blue as purple. How do you find the color reproduction on these? Is it accurate?

@MrTekSuggest

3 жыл бұрын

The color reproduction is significantly improved on the 2.0 immersion. Have you check out my previous Govee video? kzread.info/dash/bejne/epuJr5p9mrOYpdI.html

I enjoyed this video. Its helped me to make the right choice. of course I have subscribed to your channel.

@MrTekSuggest

3 жыл бұрын

Glad that it helped you out!

Great review and great video What do you use for the video while testing out the colors?

Works with my curved 55” LG perfectly 👌🏼

@MrTekSuggest

3 жыл бұрын

Nice! I actually had the original installed on a curved 55 inch as well.

Got my bars setup the other day. Notice they doing same color on both sides. Was messing around and seen a update was out for the bars. Now they actually show correct colors on the tv like the leds strips.

@MrTekSuggest

2 жыл бұрын

kzread.info/dash/bejne/g52OltSolpDel5c.html

Dang MrTek…very comprehensive!

Out of every one your a G bout yours homie. Nobody was good enough to explain the right way. Not everyone will understand tech talk and that’s what these fools be doing so it makes it harder to understand.. but the problem with these lights is most people like myself has the tv hanging so the bars are a lot lower. So I had to build either a wall mount or an adjustable speaker stand.. I know this is an old video but gots to appreciate it regardless.. I have the T1 version of this. And it didn’t have the option to stick these on the back of my tv. Soo I just used my Mexican ingenuity lol and made them stick a certain way bcuz mine are rounded unfortunately and I have my ps5 behind my tv I wanted it to look in the front as ghosted as possible.. I’ll tell you what homie it makes a bigger difference bcuz it adds on to the already strip of lights .. so those colors you mentioned at the end of this video I have not had that off color. It takes time to figure out and adjust the lights but the bars over power sometimes the led’s , so if one side is green and red bcuz I followed your style it’s pretty much on point. At first I wasn’t going to put the bars on but after watching videos and seeing yours and I ended up calling govee customer support and asked bunch questions.. there the ones that actually laid it down bout why the bars sometimes don’t catch that right light. So now everything spot on .. I know with certain games or things that are very fast the lights 90% stick with the games for most part. Nothing is gonna be spot on and I’m really hard on everything to be just right or spot on but in reality it’s not.. anyways much respect homie..

I want to know where u got the funky triangular background wallmount ? Looks really good.👍

Amazing video keep it up!

@MrTekSuggest

3 жыл бұрын

Appreciate it!

Another great video!!!! I am might skip the bars Might LOL 😂 I just don’t want to have 2 cameras. So I’m going to wait and see if a new product update comes out. Awesome review by the way!

@MrTekSuggest

3 жыл бұрын

Appreciate it!

Great review

I’ve got a 49 inch curved tv and thinking about getting one of the light packages for gaming. Do you know if the curved aspect causes any problems with placing the camera onto the screen?

excellent review.. I had the same findings as you. If you have a reflective screen that can affect the camera's interpretation.

@MrTekSuggest

3 жыл бұрын

Thank you!!

So out of interest there's tips for larger displays, but what about smaller displays, I'd love to get something like this running with my 48" but the strips never work overly nicely because of being too long so it doesn't work out as nicely as it could, any tips for dealing with that?

Under rated reviewer. Subbed 🔥

@MrTekSuggest

3 жыл бұрын

Appreciate it!

Super helpful review! What song was playing during the comparison demo? Super sick!

@MrTekSuggest

3 жыл бұрын

Appreciate it! Glad it was helpful. Song: “Tak” by Bobby Richards

Hey great video didn’t know they made this your video help me out a lot. just wondering that if you get a usbc splitter male to 2 female and you plug 2 light strips in to the govee box do you think that it would work in stead of having 2 cameras. 2 immersion kits 1 camera with the splitter.

@MrTekSuggest

3 жыл бұрын

I actually got around to trying this, even though Govee me doesn’t recommend. No luck unfortunately with using a Single camera to power both of the devices

The combo is AWESOMENESS❗

@MrTekSuggest

3 жыл бұрын

They’re a lot of fun together. Thanks for watching!

@JakeSulinjr

2 жыл бұрын

@MrTek Suggest Reviews or @MrSoundsLikeHeSuckingNastyJollyrancherWhileDoingThisReview has got a point but be aware there is significant color timing delay. My Phillips Hue setup is far superior but you can't beat Govee when it comes to price. I personally use Phillips Hue in my Theater room and Govee in my living room.

Love your video bro

Thats a pretty sick voice over! nice vieo man! Just got my Flow Pro today, it had a valentine deal. Had been checking Philips Bars but for simply "try and see if i like it" i found that way to expensive. So far i think the flow pro is nice. Im gonna try to use Velcro so i can switch between laptop setup and tv setup

@RomboutVersluijs

3 жыл бұрын

One thing i do hope they change or update, is the power output. it looks like its exponential. At 50% you almost at 100 already. there is hardly any difference. 1% feels like 10 already. I also hope they make a desktop app

@RomboutVersluijs

3 жыл бұрын

ONe other thing i dislike. The wire comes out at the bottom, in all their images they retouch out that wire. I wont push them down completely since that will stress the cable. They should putten a cut in the stands so the wire could pass through and wire it out from the back of the lights.

@RomboutVersluijs

3 жыл бұрын

One other thing i would suggest to them is lower the angle of the camera. With a lower angle it will capture more of the display. Currently it just grabs about 1/3 if your lucky. If its tilted down it will see the top corners better. At least i think. First time i saw these i could not understand why it could only be placed at the top. At the bottom its less distracting. Gladly they made that possible now. BUt i guess it doesnt really matter. I think the older version will work upside down

@MrTekSuggest

3 жыл бұрын

That’s a great idea!

@RomboutVersluijs

3 жыл бұрын

@@MrTekSuggest Well i need to clean the velcro on one side of all vibers. Even i do got 3M tape it wont hold properly. Went tking them off the tape doesnt hold. But i found another easier method. Because they are angled i put them side by side at the top of my monintor mount. I got a dell with a vertical stand. Then i use a hair rubber band to hold them together and the band goes over the top of the monitor stand. The bars rest on the cables which come through the hole. And because the are 45deg angle they glow outwords. It works perfectly !!! Its was even easier vs the Velcro setup :)

Been waiting on this one ☝️! I have the strips on my oled but now I have the flow pros coming in on Monday to try on my 49in ultra wide this will be challenge forsure I’m thinking my camera won’t be able to be mounted on the monitor but we’ll see

@MrTekSuggest

3 жыл бұрын

NICE

@dmo848

3 жыл бұрын

Put it on the desk, you'll have much better control of the camera that way

Is it possible to mount a light bar at the rear top and rear bottom of the tv? I would rather have more color projected from the top and bottom.

Take it off game mode and only use movie mode. Game mode flickers if u look closely. I thought with games it would be distracting but it's really not. Just extra color pop is all which is a plus in my book

Thanks for the review. I’m a pass on the bars and stick with the Immersion Kit only. Besides, it’s only temporary as I’ll be getting another TV and going with the Hue setup.

@MrTekSuggest

3 жыл бұрын

You bet! The bars actually just got a huge update. Game changer

How thick are the bars? My concern is how bulky they are to mount on the back of the TV.

thanks for such great reviews, both this one and the immersion kit... I was wondering since this is a couple of months old, are now the bars able to display different colors?

@chonzy

3 жыл бұрын

man, you're miles ahead of me, just realized you made an entire new video on this, thanks!

@MrTekSuggest

3 жыл бұрын

😁

This is pure gold!

@MrTekSuggest

3 жыл бұрын

Glad you enjoyed!!

Hi and congratulations on your reviews. You know if I can connect an RGBIC strip to the Flow Pro controller and get the same effect as with the immersion kit? I think the bars need a little more brightness. Thank you and greetings from Mexico City.

@MrTekSuggest

3 жыл бұрын

Hi there, greetings! Unfortunately no. The immersion strips function with zones whereas the bars do not

You sir earned a sub.

Govee now has a kit to combine both while using 1 camera. Unfortunately you’re SOL if you already bought both kits separately.

can you use a USB C splitter to the control box if you want to run both the bars and strips off the same camera to make sure they are getting the same info?

I'm noticing on the tv light kit in your video that it doesn't produce yellow. And it doesn't track and place the other colours on the wall apart from BLUE.

Hi Can you tell me where did you get those videos to test the lights? i think they look awsome

I'm here since the lightstribes mkt working for my tv since it's to small ..goove told me the lamps would fit

Great review. I have 49 inch TV does the Immersion TV Light Kit gonna work?

I'm a little burnt out on watching videos and doing research the past two days, so I apologize if I'm asking a question you've already answered. I currently have a LGb7a 65" model and the back panel has a raised section -- a hump, if you will -- and due to that fact, I'm leaning more towards these Flow Pro Bars since I don't think the strip lights will be easily applied. Of course, it seems like the bars are better suited for a smaller model TVs and should probably figure out a way to implement the strip lights. What's your suggestion?

@MrTekSuggest

2 жыл бұрын

Hey man, no problem at all. I would really try to get the strips to work first because I really think that you would be much happier with the experience for your screen size. For a 65" TV, you will not be able to install the strips right to the edges anyway. What model TV do you have specifically?

could you combine 2 sets of the pro flow bars or sync another non camera bars that are longer for the top and bottom for smaller tvs

Would 2 sets of regular light bars be best (brightest) kit for the buck?? Not looking at camera version bc I run 2 55" 4k tvees as monitors for my workstation. TIA!!!

Great vid and Great content on your channel! Now I know that the Flow Pro bars are meant for screens that are under 45", however, i was wondering if it was possible to use them on a 55" without too many issues, if any?

@MrTekSuggest

3 жыл бұрын

Appreciate it! As for your 55, I think that the bars held their own fairly well with my 65 , which is shown in the test run. So I think a 55 would do fine. Are you planning on mounting them or freestanding them below

@Nayarito

3 жыл бұрын

@@MrTekSuggest I was just gonna let em sit next to the tv whilst having the strips on the back

This was super helpful. I’m really interested in the bars for my 43in tv but seeing that they can’t produce the separate lighting on each when in the video mimicking mode is disappointing. Trying to decide between going with the bars or the backlight which would mean trying to snake excess strip behind the tv

@MrTekSuggest

3 жыл бұрын

Really glad to hear that you found it helpful! My aim in making this video was to shed light for folks with dilemmas just as yours. With a 43 you'll definitely have to do some snaking, but it is doable. As for the bars, I'm hopeful that we'll get a few updates down the road to improve their video performance.

@zacharykoplik6135

3 жыл бұрын

@@MrTekSuggest thanks for the reply, in your experience has govee updated their products a lot? I would definitely be interested in the bars if there’s just some hope they might fix a few of the flaws.

@MrTekSuggest

3 жыл бұрын

Govee does keep the app fresh with updates and bug fixes. Something like this would require a larger update than usual, if it is indeed doable via software. I will say it is easier to dip your toe and perform a test run with the bars than it would be with the strips. Because once the strips are installed, it will be quite a hassle to remove and return

@zacharykoplik6135

3 жыл бұрын

@@MrTekSuggest thanks lots, I think I’ll go with the bars for now

Why is it when I'm watching a trailer for Mad Max, something that's mostly orange, I'm still seeing purple appear at the bottom of my screen. Is this normal for these lights? They seem to only perform their best during those amoled videos

Great review, did you ever think of comparing the Govee Immersion Kit VS Hyperion? Keep up the great work!

@MrTekSuggest

3 жыл бұрын

Appreciate it. I have not tried a Hyperion set up personally. I’ve seen a few videos on them though. What seems tough with this kind of set up, is that parts and software can vary and therefore individual results as well. Are you currently running?

@bigal5068

3 жыл бұрын

@@MrTekSuggest Not yet, I am trying to decide between Hyperion and the Immersion TV light. I like the lower cost of the Immersion light but that camera is really an issue for me. Hyperion is more complicated but does support bigger tv sizes. I look forward to watch more of your videos.

I have a 59 inch TV. Is the flow pro a better choice?

Will using a USB Y splitter allow you to connect both the Immersion & Bars to one control box?

@MrTekSuggest

3 жыл бұрын

It will not unfortunately. It is not recommended, and I have actually tried using a hub splitter. To no avail a dedicated camera is required for each

Nice video. What's the show/movie you have playing at 13:42?

I have a question would the light bar be best for a 32 inch monitor

you think govee would just make a universal system that can connect to one camera and use several lighting elements dynamically depending on positioning. Wonder if thats just a software upgrade away

I think I'm going to grab this. Thanks for the video very well explaind. How did you get those beautiful colorful images on you tv they look amazing

@MrTekSuggest

3 жыл бұрын

Hey there, glad you enjoyed. Here is a good one! kzread.info/dash/bejne/eahq2a19nqqWqKQ.html

@Joe-if5rq

3 жыл бұрын

@@MrTekSuggest thank you

Hello! I just found this video, so awesome! Maybe is too soon to ask but I see a month has passed, did any SW update arrived or do you know of they are going to fix the color sync issue in the bars?

@MrTekSuggest

3 жыл бұрын

Hi there! And appreciate it. Not as of yet. I have reached out for an update in that regard. I’ll let you know what I hear back.

@elnetocc

3 жыл бұрын

@@MrTekSuggest thanks a lot for the info! Anyway I went ahead and bought the immersion light kit first! But I'll be waiting for the flow pro bars feedback for sure!

Do both cameras have to be mounted next to each other or can you mount one on top and the other at the bottom?

Could you put these behind you? Do they have to be near the computer? Reason being I would like to use them as back lighting during my streams.

Have you find a way to set up the immersion for Tv 43’’? Thank you

@MrTekSuggest

3 жыл бұрын

Hey there, 43” is a real stretch for this particular immersion kit, but nothing is impossible if you are determined to make it work. You’ll have a good deal of excess strip to “snake” behind the TV.

Where do you get those awesome demo animations?

good stuff brah

@MrTekSuggest

2 жыл бұрын

Appreciate it bro!

Well made video. Subscribed.

@MrTekSuggest

3 жыл бұрын

Much appreciated!

Hey, I really like your wall behind the tv

@MrTekSuggest

3 жыл бұрын

Thanks, they are the Art3d panels. You can find a link in the description.

Nice testing

Can i use these horizontal taped to the back of the tv cabinet??

seeing as though I have the 48 inch lg cx I think the light bars are good enough for me for my setup. After getting the original tv led strips and being disappointed at how much I had to fiddle with the camera to get it to pick up the tv and it still being largely inaccurate, its great to see govee improve upon the design of the camera and the accuracy of the lights on their immersion kit. Unfortunately Im done with the led strips, so the bars are perfect for me. Plus they added the half screen update, which makes this more than enough for me to get that extra immersive experience. Goood vid!

@MrTekSuggest

3 жыл бұрын

Hey, thanks for sharing your experience with the immersion. I hope the bars work out for you!

@tombeech9920

2 жыл бұрын

Happy with your purchase? I have the 48inch cx too

@WillzMaster85

2 жыл бұрын

@@tombeech9920 yes I am! Although I will say, the bars is much better if used as a COMPLIMENT to the immersion led strips. I made my decision of not buying the strips based off my experience with the older version of it, but after seeing how accurate the bars were with the colors and brightness, I wish I got the immersion strips first, and then the bars. But overall I do recommend if you want a quick immersion setup. For the 48 inch, it’s very bright and extremely accurate 95% of the time . Just stick it onto the sides of your tv and you’re good to go!

@tombeech9920

2 жыл бұрын

@@WillzMaster85 Good to know. Did you get the immersion strip for your 48inch? Would have thought its too small. Cheers for the reply

@WillzMaster85

2 жыл бұрын

@@tombeech9920 no, which was also another reason i never got it, however, I have a friend that have installed it on his tv (48”) and it works well. Just have to adjust it when installing by leaving a bit untaped on the corners when installing so that it can accommodate the smaller tv. He said it took him a while but he got it to be accurate because at first, it was showing colors on the bottom of the screen that’s supposed to be on the sides. After adjusting and a little ingenuity, he got it installed properly.

Could I use these lightbars on lg oled c1 instead sticking leds to the back of tv

If I am not using a sound bar beneath the tv like yours, do you recommend the camera for either light to be on top or bottom of the tv?

@MrTekSuggest

3 жыл бұрын

Hey there, I actually saw very similar perforce with the top or bottom mounted setup, as long as the TV was perfectly flush against the wall. However, when tilting the TV slightly downward (I have low seating), the colors performed better with a bottom mount, sound bar or not. Hope that helps!

Great vid. I have 1st gen will flow pro still work or would i need 2nd gen? Thanks

@MrTekSuggest

3 жыл бұрын

Glad you enjoyed! The Flow Pro Bars operate independently from the immersion light strips, so YES! The bars will work with the 1st gen light strips.

Hey man this a great review btw 13:42 what show is that?

@MrTekSuggest

3 жыл бұрын

Thanks! The show is “ Altered Carbon: Resleeved”

Hey man, love the videos. Was wondering, do you think this kit (H6054) would be a good alternative for those with smaller TVs? (sub 55")

@MrTekSuggest

2 жыл бұрын

Hey man definitely check out my reco here for smaller displays kzread.info/dash/bejne/hKeJtMOtdcTIqZM.html

@bansheekiller

2 жыл бұрын

@@MrTekSuggest perfect, thanks!

Light strip for the win

What is the pyramid shaped stuff on your wall? and where can I get it?

In theory, can you use a USB C male to 2 USB C female adapter splitter cable to the control box to connect the light strips and the light bars to 1 camera and control box?

Hey man great video! Please tell me how can i make the wall behind the tv like that. I would really appreciate it

@MrTekSuggest

3 жыл бұрын

Appreciate it! And you bet. They are the Art 3D panels. You can find a link in the description.

@ProsixOfficial

3 жыл бұрын

@@MrTekSuggest you are amazing! Thank you so much!

What’s the difference between the 2 light bars in both kits?????

What's the name of the song during the demo?