Google Pixel 7a Teardown! - can't handle the heat...
Тәжірибелік нұсқаулар және стиль
Today we take apart Googles least expensive phone - the Pixel 7a. Grab one of my Teardown Skins for your phone HERE: www.dbrand.com/7a-teardown the smartphone tool kit I used in this video can be found here: amzn.to/2OwequL
Get my Shirts and Razor Knife here! www.jerryrigknife.com/
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
LARGE tool kit: amzn.to/2DURcr7
Travel Tool Kit: amzn.to/30LKXOY
Mega Tool Kit: amzn.to/2OwequL
Plastic Pry tools: amzn.to/1Tu57pI
Metal phone opening tool: amzn.to/1WdOFv0
The camera I used to film this video: amzn.to/2p7GtkX (GH6 amzn.to/3LyfW8d)
The Lens I used for this video: amzn.to/1QOXDw2
Wide angle lens: amzn.to/2qiYM4u
And this Metabones adapter: amzn.to/2iZ67Ty
This is the drone I use: click.dji.com/ACnP4TvUoTN-kdV...
TO SEND ME STUFF: See my P.O. Box on my 'About page': / jerryrigeverything
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
Пікірлер: 599
As a disabled person myself, I would love to see an updated review as to how your elevator is holding up.
@ThomasWood3DPrinting
Жыл бұрын
Feels like it's one of those "no news is good news". Though, I think an update would help those that need it to ensure that it's worth putting a hole in your floor for that product.
@ChrisJones-yu9rz
Жыл бұрын
Have you seen their “Not a wheelchair” products yet by chance? If so, what do you think about them?
@binarywizard69420
Жыл бұрын
Just en-
@andyvitz
Жыл бұрын
Can't wait to see you do the Google pixel fold
@gladiatorsfc7
Жыл бұрын
They definitely don't let in that house anymore. All of the videos of their solar panels and garden prove that
Numerous channels do teardown or similar contents, what makes this channel stand out the conversation Zack has with us. Extraordinary!
@carltonmantovani3947
Жыл бұрын
I appreciate you mentioning this fact. His inside jokes are beyond any other channel.
@Shahriar019
Жыл бұрын
@@carltonmantovani3947 Thanks, I've said this earlier, I'll say it again, I'd pay to simply hear Zack speak! I hope some time in the future he starts venturing into podcasts or similar areas
It's pointless to "hide" cameras that watch you, you already have a bunch watching you straight to the face on your phone.
@andrewa8569
Жыл бұрын
Obviously not pointless if they are doing it. And the point would be, that you think you have all your cameras masked off. But, u missed one....
@Daniel-dj7fh
Жыл бұрын
@@andrewa8569 I have yet to see someone with a taped front camera on their smartphone. But you're generally right. with that statement. Similar can be applied with all the mics in all of electronics.
@Baronnax
Жыл бұрын
Not me tho, I still have the OP7Pro with the pop-up selfie cam. Kinda miss the period when companies were putting their own spin on motorised cameras for a notch/cut-out free screen.
@pvic6959
Жыл бұрын
@@Daniel-dj7fh my mom has it taped lo
@TexasTimelapse
Жыл бұрын
@@Daniel-dj7fh While you haven't seen me, you just met someone that does that.
The square in the display is for the proximity sensor. They have the same things in the 6, 6 pro, 6a, 7, and 7 pro, now the 7a
@cpvm0
Жыл бұрын
And you can totally see it under direct sunlight.
@SonicIND
Жыл бұрын
@@cpvm0yes, i was worried about that
@SonicIND
Жыл бұрын
because i didn't know about Google's design for placing proximity sensor
@gFamWeb
Жыл бұрын
He mentioned that.
@itIsI988
Жыл бұрын
Samsung do the same this as well. I can see the proximity and light sensors on my Z Flip4 if I shine a bright light at it.
"It's always good to see the insides before the insides see you" Sage advice we all need in these techie times!
Congrats to the 1000th Video Zack!!🎉
My list of things I should worry about is updated today. Thanks for the updates 😅
Always enjoy your tear-down commentary. The Sarcasm runs deep with this one
I guess the display connector in the underside of the motherboard is to facilitate a display only repair without opening the rear panel.
@Daniel-dj7fh
Жыл бұрын
I'm no pro, but normally you'd disconnect the battery before unplugging things around, and from my brief knowledge this is only reachable from the back.
Fun teardown. It's always nice to see one survive. Dumb question you've probably answered elsewhere at some point in the past: what do you do with the tech you teardown that survives? I remember, I think anyways, hearing that you part out the stuff that ends your videos completely broken. This one appears to be more than serviceable still. Is it destined to be parted out too?
art class with jerry is one my favorite thing on youtube
As someone that has fixed electronics for years. There are so many electronics that have mics in them. I even seen TV from before the mid 90s have mics in them.
I really appreciate the heads up on possible hidden cameras/microphones in our tech. It’s something we kind of forget as consumers and assume big tech companies would never intentionally do such a thing. But that complacency is how a company could get away with doing that exact thing.
*"Let's get started!"* **SNAP**
@SKAAADOOSH
Жыл бұрын
I'll see you around😎
I look forward to your pixel fold durability test and teardown
The under screen sensor is a nice touch. One issue with Pixel 7 Pro is that it is so easy to interfere with the sensor when holding the phone sideways.
Watching Zach pull the sharp blade _towards_ himself getting the covers off always gives me the willies.
I'm disappointed that you didn't make a proper teardown video of the regular pixel 7. The camera bar is connected to the frame and back panel has 2 different glass panels. That would be interesting to cover. In the pixel 7 pro tear down, you did not mention about this.
4:21 I still remember being annoyed about my Motorola Nexus 6 having an LED notification light, but you had to root your phone to actually get it to work.
I also think of the teardwons as like a video a surgeon might watch before performing surgery on a patient just for people that repair phones. So they know what to except.❤
My man Zack be dropping bombs🔥 4:37
Thought you were going to be talking about the exploding camera glass with this video title that google wont acknowledge .
Great as always ❤
Jerry’s comments while tearing down the phones are as valuable as his entire work 👍
Hey Jerry, it Would be nice to see the insides of a huawei mate x3. Been a while since we saw a foldable ehy.
You should do a teardown of HP envy x360 laptop. They are metal outside but the hinge holder is plastic and breaks like a skinny stick.
Looking forward to seeing a teardown of the fold
If you like the principle of seeing insides before they see you, I recommend Fairphone and Framework for phones and laptops respectively.
Purpose of the screen flex in that position is, it allows you to change the screen without removing the back of the phone, and vice versa, change battery or other components without removing the screen
I love ur videos❤❤ I wish to see phone processer in any of ur upcoming videos. Pls do if possible 😊😊
I had seen that square recently, using my phone in direct sun. Thanks for letting me know what it 8s!
Hi Jerry really amazing 👏 and I know you are really busy with all the projects you have on hand ✋️ but it would be amazing when you are filming the tear down videos you can keep an eye out for hidden tech if you already are not 😅😂 thanks as always keep it up 👍
1:57 Interesting, you got an Indian Unit? Kind of wish these teardown skin/case of dbrand were available here in India (they ship here but become extremely expensive)
Great video. My wife just got the 7 pro but at least she's got it in a case... I'll stick with my 6 pro for now. Quick question: it's been awhile since you've done any smart watches. Possible future episode?
I want to see the insides of the Sony Xperia 5 III. or alternativly we wait till autumn when the Sony Xperia 5V will be announced. On a sidenote I like your 'calm' voice... 👍
I was today years old when I found out the camera bar on the a series was connected to the back panel
7.5w wirelessly is identical to the iPhone se 3rd gen, hope apple release a updated se this year
Seeing him to cut open the phone with his knife so close to his finger always gives me goosebumps
I upgraded from my Note 9 to the 7a as soon as it was announced. It arrived 2 days before your durability test. Mum loved it so much she's just ordered one for herself. And we're both getting dbrand Grips!
@Daniel-dj7fh
Жыл бұрын
How's the contrast between the 7a and your old flagship phone. Do you notice any negative things about the 7a?
@grumpywolfgaming
Жыл бұрын
I'm sorry, just wait till you start encountering all the bugs with this phone.
@StephenIsnor
Жыл бұрын
@@grumpywolfgaming It's competition is the Samsung A54. I refuse to believe anyone actually thinks the A54 is a better phone.
@prayhe
Жыл бұрын
@@grumpywolfgaming ????
@MRSketch09
Жыл бұрын
Surprised you'd go to a phone without a stylus... since that was what I thought was the main selling point of the Note 9.
I'd like to see something from CAT, or some other rugged phone manufacturer. I wonder if their insides are tougher than usual.
I was able to finally upgrade from the iPhone X to the iPhone 14 pro, and of course I just had to get the sweet teardown skin! Thanks Zack! Great video today!
I think you should still put the actual phone model on the titles since it would pop up more for people searching info about specific phones
Really cool to see Zack briefly mentioning Bitcoin.
It's quite common to have holes like this on the screen for the proximity sensor for recent phones wiht thin bezels. You have to put them somewhere. And I still don't see what the big deal is, you'll have a camera that's visible anyway that can record at any time. Since Andriod 12, you have a camera and microphone indicator in the system anyway (up to you if you trust it or not) and it's not like you can just tape off your camera with the whole screen around it. The only safe option was the motorized retractable cameras, but even then the microphones could listen if you want to be paraniod.
@KazeMemaryu
Жыл бұрын
I don't think that is the issue at hand. The problem there is that this can be an uninformed surveillance method, which can be seen as wiretapping, depending on circumstances. There are special phone cases to cover the cameras, and plenty of unofficial apps to restrict mic activities, and no company should be compelled to install extra hidden hardware, except with malicious intent of breaching privacy beyond the ability of the user.
@sandorbence2067
Жыл бұрын
@@KazeMemaryu The possibility has been there for a long time, it's something you can do with pretty much all OLED screens as they are so thin by design. I still don't think this is an issue as if any reputable brand would try to do this and were found out, they would look at serious fines, lawsuits and potential bans (just look what happened to Huawei for a lot less). There are easier methods to manipulate the already existing cameras, mics or just install some sort of malware/spyware app or backdoor on your system. Or just add the extra camera and sell it with as a feature.
@Tomazack
Жыл бұрын
There are a couple of options if you wanna keep full control of when you're being recorded, at least there were a few years back. One type of linux based phone had mechanical switches to turn on and off the microphone, camera and bluetooth at least.
But can you bend the battery in half? Ive found myself having to when replacing my iPhone battery’s every time cus the pull tabs do nothing but break Never remove a phone battery until after it has turned itself off from as low of a load as you can put on it, cus even a flat battery has enough energy to burn down several houses
I would expect it to have slower wireless charging because it is less of a cost. I think everyone of them should make a separate battery for the sensors including gps and cell. Google fold and tablet in late January. Samsung flip and fold. Compare both folds.
@GarnitrexGaming
Жыл бұрын
I wonder if it could even have a faster charger with the plastic back, or if that could melt it lol
When the Pixel 8 comes out can you do the basic pixel 8 and the pro?
Genuinely any phone you tear down we will watch.
Watching you cut towards your thumb on that back panel removal gave me anxiety. Im cutting/installing sheetrock as I watch this. 😂
Thumbs up 👍 back to running again 😊
Great to see
Great video Jerry! Can you do Poco F5 next please ?
Love this channel
😂😂love that parable @4:33 to 4.51
Unknown spying underscreen cameras is interesting to think about but they require the screen to be black so they'll be noticed right away Im still a fan of pop-up front facing cameras though, I'll definitely notice that my phone will try to spy on me because it'll roll up the camera to do it
@albertogiavani75
10 ай бұрын
Meanwhile iPhones shows when the camera is on with the orange led
@mihirpanvalkar
9 ай бұрын
@@albertogiavani75 So do pixels with green dot.
Pixel Fold please, I'm gonna be getting on as my work phone, and would love to see it tested and torn down.
Would be nice to see some of the new Sony Xperia 1v with their new tech camera !
I'm liking my new Pixel 7a, but gotta admit...you had me a little worried at the title of this video :)
Google pull tabs are unique and need to be pulled in a z pattern starting from the top and you almost saw away the adhesive while pulling up. A bit different methodology than apple pull tabs
The A in the Pixel 7a stands for Able to withstand Jerryrigeverything test and teardown 😂
I wish they still made plastic screens and back panels phones. I know, they get scratched easily but I use a glass screen protector even if the phone has a gorilla glass screen, so I don't even use it anyway. At least this way, it wouldnt break when I drop it on the ground.
Did you change the title? I remember it was something like "add this to the things to worry about"
hey uh can you please do the durability test on the pixel tablet and the pixel fold? thank you.
can the skins come with a wallpaper to show the inside from the screen? like front and back
I'm on to you and your trick of copying the articles and then removing some parts of it to make it look like there's more articles than there actually is @ 4:29 in the video Edit I still like you and your channel just your pretty sneaky
Is it possible to do any upgrades while you're inside a phone? Like a more powerful wireless coil or bigger battery? Always enjoy your videos! 👍
@panzerofthelake506
Жыл бұрын
Probably not
looking forward for honor and pixel folds
Hey Zack, please do the durability test of moto edge 40 & 40 pro. Thanks in advance 😊
Cutting that phone open with the razor going toward your thumb made me tighten up lol
This hidden square is on the 6a too, noticed it in bright sunlight.
@suthtokcraew1227
Жыл бұрын
@Andrej good info 💯
I want to see the LAVA Agni 2 😊 next time on your channel
I preferred when pixels opened screen first. It's just a lot more convenient to replace the screen when it's the first thing that comes off.
@Starmast3rmusic
Жыл бұрын
You can open this from the front or back, so if you need a screen replacement, you don't need to disassemble the whole phone.
@LazorVideosDestruction
Жыл бұрын
@@Starmast3rmusic Oh okay that's awesome then!
Love the teardown skins
Cool video 👍 I wish the video was long though
Yo Zack, can you do a teardown of the Galaxy A54? I would love to see it very much❤ Thanks
I'd rly like u to teardown one the smiler phones on the market so we can see how they save weight thickness. Huaweis and Xiaomis r usually so and newly some Motos
nice work
0:48 Where could I find a replacement back panel for my Pixel 6a? Mine has become quite scratched from using the official case from Google... Ugh. Truly unfortunate.
jerry can you make a video about poco f5 dissemble and your opinion about the phone ❤
It is better to see inside, before the inside see's you 😮
Always good to know
Oh no, a hidden spot for potential cameras is not the direction that I thought tech would take us. Then again, you can be spied on in your living room with the promise of a "free TV". I love tech, but if greed keeps getting in the way, I might just move to the mountains and live off of solar and my own garden.
I want to see the insides of xiaomi's fold!
I always wanted some videos featuring phones from the Samsung Galaxy A series. A great video nonetheless.
what we need now is one display connector for all phones, like hdmi etc. if a pc could support all these monitor models, so sholuld a phone. most damaged thing in a phone is the display. wish I could just used a broken pixel 6 pro with the 4k display from old xperia
God tier watch mate
Zack, can you durability test and teardown a Sony Xperia 1 V? It's been a while since there was a Sony on the channel
"most current politician was born before the microwave and don't know the difference between a cookie and a bit coin" x'D had me dead laughing!
I want to see you review the pixel fold.
I'd love to see a tear down of the new Motorola Razr+ foldable phone and how it compares to Samsung Flip
from now 🤝 that 4:47 will be my favourite dialogue over "Glass is glass..." 💀
Tear down & see u arround
Can you make a realme c25y durability test video
Where is the video for the ROG 7? The opening of the phone!
They should give you that artifact (sword) for a durability test. I bet deeper grooves at level 4
Is there a correlation between the low wireless charging wattage and it being a plastic back panel? Are they possibly worried about overheating and melting the back?
@realcyphox5919
Жыл бұрын
are you serious? no, of course its the good old correlation between "oh, so want (fast) wireless charging?" and "then buy the epensive model, cheapo!"
Hey Zackery I am waiting for teardown video of 6a also since so long
Hi Zack I was wondering if you would consider doing the regular flagships from the samsung line. This year and if I remember correctly, also last year you only dod the ultra model, but the s22 and s23 are built quite different.
@Daniel-dj7fh
Жыл бұрын
Would be funny if Samsung also pulled an Apple move (with the 13 and 14, being the same exact phones with minor hardware and software updates)
yay i love the teardowns
Have you done the teardown of the latest Nubia phone yet?