Thank you for very clear instructions. All of my questions answered. I am new to flash and have spent days trying to understand the manual.

mine just arrived today, and this is exactly what I was looking for, big thank you man, amazing video, thanks

Kudos! He did a great job explaining functions and also noted advanced functions most of us will never use. Great job!

Excellent clear and unhurried review.I wish more were like this. Thank you!

Really helpful, clear, concise and the information I needed. Thank you!

I saw many videos but this one was really good. made very very easy covered all settings very clearly. Thank you

Great tutorial thanks a lot. I watched it a couple of times. The presentation is humble, unhurried and clear.

This was EXACTLY what I needed! Thank you so much!

Thank you! I've watched a few and this video successfully got me to pair and shoot. Thanks!

I watched this video before and loved it! I needed it again and forgot which video it was, so I had to watch several to finally get to this one again. Yours is by FAR the best. Thank you!

Awesome Job! I was so confused when I got this thing. Thank you so much!

Tutorial was awesome, very simple, well explained, didn't get side tracked, but most important. It was very easy to follow you and simple, thank you!!

Great video with tons of great info. Love the description part as well. Bravo and thank you.

Excellent video. I wish I would have watched yours first. Well laid out and useful!! Thanks

Excellent tutorial, clear and easy to follow, well done

Xpro made easy. The best so far I have seen. Thanks a lot.

As a Sony Interior Design Photographer, I get the White Balance problem quite often. So being able to use the new hot shoe trick and only send the firing signal is ideal for me, as third party adapters would constantly fail on me. Very helpful video. I just received mine from you guys and it's great! Also, the double click turning off the strobe is an incredible useful new feature.

Thank you so much. You made it really easy to set it up!

Clear and very professional, thank you!

Thank you for taking the time.

Excellent delivery !!! quite easy to understand

Excellent review.. The interface on this unit is relatively simple and straight forward, unlike the Godox X1T. However, I learned a good bit from the video.

I love this controller. You can fine tune each flash beautifully.

Very good walk trough. all my question answered.

Just got mine. Great video thanks!

Thank you so much best video I have seen on this controller!!!!

Great job! Thank you!!!

Thank you very much for this informative video. Now I can safely explore.

Great vid. Got two SKII 300’s will be getting one soon.

This is simple and informative. Thanks

this person deserve subscribe for explaining this very well

AWESOME CANT WAIT TO USE MINE

thx for this, very helpful

What a lovely guy. Thanks for your help.

thanks for your explanation

Great video. Thanks. 😀😀

Thanks for the video. The Xpro is simple enough to figure out if one used it for 15min but there were setting I needed clarification about. Thanks again.

Bit late I know but I just came across this vlog. I have the goddox XPRO system for Fuji xt2 and works like a treat off camera flash I also discovered that the Fuji goddox system was also works on my d800e controlling two small goddox flashes in manual mode no ttl which is what I prefer anyway just thought it strange how although branded for Fuji it seems to work for Nikon as well but no complaints great system

Great explanation

How is this video the ONLY one like it out here on yt, yet it's so underrated. 23+K views and only 354 likes... Thank you for your time making this tutorial / walkthrough, it's a tough system to set up but you made it that much easier!

@DanMolinaStudio

Жыл бұрын

Seriously eh?

Saved my life. Thanks yeah

good video, but one other use for the sync function is to allow a leaf shutter lens to trigger the flash, like on a Hasselblad, Rolleiflex TLR, large format camera,or even as a trigger in say a bird hide, an optical 'detector' to fire the shot, without you being at the camera.

Ive been wondering what that second switch is forever! Lol. Thank you

Muchas gracias! me es muy útil

Many thanks.

pretty good teaching, I have the Godox XProS TTL Wireless Flash Trigger for sony with 4 860 series strobes and sometimes can't get them to work like tyring to photography night blooming cereus last night which means I didn't get the shot when they basically only bloom for one night and close up at dawn forever. Will try again tonight since they bloom in groups. Gotta be able to just turn on and go which I have not achieved yet. Also, training is rather spotty with this system.

@Strobepro

6 жыл бұрын

Make sure you have the trigger in close range mode. Access it in the custom menu. Maybe you're getting some interference by being too close to the flashes.

@michaelryan2622

6 жыл бұрын

Strobepro Studio Lighting naw, just have to watch all the signs on the various screens and be sure I'm in the right mode. The tip on the ranges was very handy and your your videos nice and thorough but whatever you say this is not the simplest strobe system in the world.

Nice and clear, thank you! When using the PC/Sync port to attach a film camera should the setting me IN or OUT?

Great video...thanks for creating and sharing. Can I have a few Yongnuo flashes that are Canon-compatible. Can I use a Godox X1R-C receiver for Canon and the XProS trigger for Sony on my Sony camera and everything will work?

Good Job!!!

Thank u 😍from India ☺️

Agree with the comment below. Best Xpro tutorial I’ve seen. A question, I’ve noticed this on Mine and in Your video. When You change the zoom and the sync on the Xpro, the flash menu doesn’t change. Does the XPro trigger override the readings on the flash? Also, btw, Do You have a tutorial for the flash?

@Strobepro

5 жыл бұрын

Hi Billy, The XT Pro trigger will always override any local adjustments made on the flash itself. If you're using one of the X series lights then you would see the changes. Depending on the model of OEM speedlite, you won't always see the XT Pro changes on the back of the speedlite display.

thanks for the upload, where do you find the firmware in the menu please?

Thanxs for the video, is there any way to tell the controller that I would like to increment in full stops? So power up and down by one stop eachfilm GmbH time I press the trigger?

You can control modelling lights separately for each group: press MOD to swich on all the modelling lights, choose a specific group (by pressing A,B,C... buttons) and then press MOD -- it'll switch off only the lights of that group.

At last, a clear and helpful info tutor> the original paper manual sucks :-)

Can you make a video on how to make different roofs in adjust flash settings for different flashes in different scenarios. For instance, say you have a 3 light setup and you want your key light to be setting Axe and then you want your room light to be setting why and then you want your back like to be settings e. Could you make a video showing us how to do so?

Very clearly explained! Could you tell the differences between this controller, and the MKII? Is the new one any better?

@Strobepro

4 жыл бұрын

We just released a new video showing the new features on the X2T. kzread.info/dash/bejne/lpOhl7SLYtCwgaw.html

The sync function on my X ProF for Fuji is greyed out and I understand to access HSS I have to press this function. How can I restore it.

Thank you for the clear well versed explanation. I am using this trigger to gether with XTR16 mounted to a Godox ES600p strobe, although the strobe triggers, the power levels in the strobe do not correspond to thise set in the trigger. Am I doing something wrong? or this is the level of functionality for the XTR16 reciever with this strobe? thanks!

@Strobepro

5 жыл бұрын

Since that strobe is an older model you would need the XTM transmitter to work with the XTR16. This transmitter can change the scale from 1-5, 5-8 and 1/128-1/1.

Does the xro Sony communicate with Sony HVL-60RM and TT685S?

Does the Xpro works with the Neewer NW600? Is the same model as the Godox AD600.

Hello. Your Xpro shows a ZOOM setting of 135mm while the flash display shows 24mm. You forgot to set your flash ZOOM to AUTO. When the flash ZOOM is set on MANUAL (as you can clearly read on the flash display), Xpro cannot control the ZOOM flash setting as indicated in the GODOX Xpro instructions page 39 (ZOOM value setting).

Hi. Please, can XPro control a AD200 as continuous light while it uses Godox ad-L 60 LED? Thanks

Can i use that with my Canon Speedlites 43o II AND III ALONG WITH GODOX TT685C FOR OFF CAMERA FLASH?

Is that flash Godox Thinklite TTL HSS TT685N?

Sir please tell godox trigger for photopro strobe lights.. studio strobe lights

Hi Kevin, Thanks for sharing the info. I'm new to Godox. In the mail my Godox V350 (Sony A7 III body) + XPro-S Transmitter. The quesstion is, should I have 2 V350 heads am I able to set different power settings on the heads from the camera trigger transmitter. What is the total number of heads the transmitter can handle? Thank you.

@Strobepro

6 жыл бұрын

Yes you can control up to 5 groups independently with as many lashes per group as you want..

I'm having problems when using HSS that it will just refuse to shoot in HSS even though the trigger, the camera and the AD200 are all set on HSS. Usually when I first start shooting it is fine but at some point it will just stop. Any ideas?

How to trigger Canon 580ex flash with Xpro C ?

Can you do a video on how to use the trigger with Nikon flashes ( SB 910)

@rizwanhaider131

6 жыл бұрын

justray65 I’ve a same question does it work with sb 919 or not?

Will the XproN and X1RN work with the Nikon SB 600 and 700 flash guns

Hi Does this work with canon flash 600 EX-RT?

The TTL funtion of the (x1t/x2t/Xpro) can control the TT600 (Manual Flash)?

How to activate the AF assist beam from the Xpro? I have switched it on but still not firing.

Right now theres no option to fire a group without first disabling other groups. I think it would be a definite plus to be able to select a group, hit the test button and fire only those flashes in the group without having to go to each other group first and disable. To fire all groups would then be a simple select all and hit test button.... no? Would really like to see a firmware upgrade addressing this issue... tnx.

Will it work with the Neewear Vision 5 in TTL ?

The focus assist button on the side of the trigger does not work on a Sony a7iii, zoom function does not work either :-(

Hi , thank you for your information, its very helpful. I just buy the XPRO today. I have Canon 600exrt , so when I tried to lingking the xpro m to my speedlite canon 600EXRT is not working. What I have to do to linking it together. Hope you could help me . Thank you

@Strobepro

5 жыл бұрын

The controller will not link directly to an OEM Canon flash. You would need the XRC receiver on your Canon Speedlite. You can find the receiver here. strobepro.com/products/strobepro-xrc-radio-receiver-canon Thanks

Does this radio controller work with most speed flashes I have a neewer NW 565 flash?

Great! I bought two TT685 and combined it with X Pro. It does not work. NOW it DOES !!

Is this Normal Godox X pro (c)? Or Is it from your website exclusive? Which is the cheap and best remote Trigger to connect Canon 5D III with Canon flashes 600ex rt ii 580 ex ii 430 ex ii If I can trigger 600ex rt ii , I can use other two as slave as well.

Thanks so much for the Video, very appreciated. Got a question: I’m using a 200ADPro & XproC. I’m often off camera, remotely hand holding 200ADPro & remote triggering the camera -using a remote-, however I’ve found the XproC will override any setting I have on the 200ADPro. Is there anyway to stop this so the Xpro will simply trigger the flash & not override it’s settings? (Currently the only workaround I’ve found is to put the Xpro in APP mode (and not use the app) - but this seems a bit backwards? Is there a better or proper way to do this?) Thanks heaps.

@Strobepro

Жыл бұрын

You are correct in using APP mode. This is the only way for controller not to override the AD200 settings.

A great trigger, easy to use and definitely an improvement over the old one, however I find the control for the mod lamps too clunky, counter-intuitive and confusing. I have four strobes each assigned its own group. Displaying all the groups I can turn off or on all mods together. I select a group and turn it off, lamp goes out ok as expected. I press set button to clear my group selection. The LCD would show an icon at top to indicate mod lights on and an icon next to each group that is currently turned on. I have one turned off, no icon next to that group, good. I press mod button to turn off all lights, all lights currently on go out, good. I press mod button again to turn on lights and ALL mods come on... ?? Facepalm. DUH !! Expected behavior is that only those groups with icon on should be turned on and those previously turned off would stay off. I would think a firmware upgrade could fix this over-sight / anomaly. I would also like to see a firmware update where I can select a group and turn the mod light off or on without all coming on /off. Also an update where I can adjust the power of the each mod lamp using the dial wheel when selected... this would be if the strobe was NOT set to prop. Also I find the LCD is also tilted too far forward for use on a tripod at head height....maybe just me??.

Is there a way to identify the current firmware on the XProN ?

how to connect to Nikon speedlight sb-900 ?

Great tutorial ...... when you used TTL SETTING how you use the camera settings? Thanks

@Strobepro

4 жыл бұрын

Hi Eddie, With TTL, you can use your camera in any setting. However, I would generally suggest shooting in manual, and ensuring your flash is below your flash sync speed to get the most consistent experience (that way only the flash power is automated).

@Havanero52

4 жыл бұрын

Strobepro Studio Lighting thanks

If you do not need TTL just get XT 16 (no ttl and no zoom) and I think no HSC

Hi Strobepro; The Xpro ( N) HSS doesnt work with the Nikon D2X. ( just in case) Any other with the same experience?

@Strobepro

6 жыл бұрын

Make sure you have your flash sync in camera set to Auto FP.

I find that the min/steps setting in the menu screen needs attending to... on my trigger I have the option to set to either 128 or 256 and in steps of 1/10..... theres strobes that only go down to 1/16 power and no way to tell the trigger to stop at 1/16. My thinking is we should be able to set the limit of each strobe and not be a global setting. Also, if theres one strobe that is set to 1/1 power while others are set to maybe 1/2 then selecting the "all" option to raise the power of the remaining strobes does not work because the one set to 1-1 has reached its limit. Similarly, using the "all" feature and adjusting power downwards - if one strobe has reached the lowest limit set in the menu then no others will be adjusted downwards. Expected behavior is that all strobes not reaching 1-1 power or the min limit should be allowed to adjust until ALL strobes reach the limit whether upper or lower... a firmware update should be able to handle this.

How to use two or more flashes. My trigger (X-Pro) connects only one flash (Godox) V1 with V860 II the other does not connect. Who can show how to do this? When I connect another flash in group "B", the current flash in group "A" turns off for some reason.

Which APP should i use for APP MODE shoot?

can't get it to work with the sb900 nikon. tip anyone? Al set to same channel and group and nikon flash is set to remote

Hi strobe pro. Thank you for this informative session. I’ve a question that I’ve Nikon sb 910 so please tell me if I can sync sb 910 with this trigger?

@Strobepro

6 жыл бұрын

It will if you put the 910 on the XRN Receiver. Your 910 doesn't have a built in receiver so it needs this. strobepro.com/products/strobepro-xrn-radio-receiver-nikon

@rizwanhaider131

6 жыл бұрын

Strobepro Studio Lighting I’m currently living in Dubai and I checked it’s availability here but unfortunately I couldn’t find it, so is there any second option available.

@Strobepro

6 жыл бұрын

Please contact us at the store and we can check shipping prices for you.

@mikerichardson60

2 жыл бұрын

Nikon has its built in wireless function with TTL. Why would you want to add unnecessary gear to the mix?

I am using Fujifilm X-T2 with Fujifilm EF-X500 flash. Question Can Godox XPro or Godox X2T triggers Fujifilm EF-X500 off camera or any non Godox speedlites off camera?

@Strobepro

Жыл бұрын

Unfortunately not. These controllers are only compatible with Godox flashes. There are flash receivers that can bring Canon, Nikon, or Sony flashes on board with the system, but there is currently no Fuji receiver available.

I have just got this together with an X600 II studio flash. Can I control multiflash mode from the trigger? Thanks.

@Strobepro

5 жыл бұрын

Yes you can control multiple lights.

2 issues I’ve had, learned the hard way. 1) My Fuji cannot be in Electronic Shutter. Mechanical shutter only. 2)Will not go into HSS if camera flash is on first or second curtain sync. Must be in Auto. Hope this helps someone. Also my Xpro trigger doesn’t have SYNC appearing on its LCD. But the second button over does turn HSS on even though it’s blank.

I have a Godox AD360ii TTL flash for Canon... Can I trigger the flash in manual mode and with HSS using the XT Pro (Sony) trigger,

@Strobepro

5 жыл бұрын

Yes, as long as you have the latest firmware on your 360ii.

Hi Kevin, can the Xpro on a nikon body trigger the Godox Ving V860II for C (or other Ving V860II for C for ex ( made for other cameras)?

@Strobepro

6 жыл бұрын

So if you have the XT PRO Nikon on your Nikon camera it will fully control any other X series flash. Essentially the Canon flashes will convert to Nikon if you're using the Nikon trigger. The same is true for the other brands. They are interchangeable. You just need to keep the same brand controller on the camera if you want TTL and HSS. Otherwise you would only have manual and power control. So to summarize the trigger matters, the X series flashes don't.

👌

Great video....which cable would I need to update the firmware?

@Strobepro

5 жыл бұрын

Thanks, it uses usb c.

@salpatalano2306

5 жыл бұрын

Strobepro Studio Lighting Thank you so much....