Cannot thank you enough for this video. I've been trying to figure out how it mounts and how it tilts for the longest time. Off camera flash is something I've been slowly trying to learn. This was soooo very helpful. Thank you thank you thank you!!!

@Strobepro

Ай бұрын

Glad you found the video helpful! Feel free to reach out to us if you ever have questions.

Exactly the video I am looking for. I just got mine yesterday and now I will set it up, thanks for the video! Very informative.

This is the most comprehensive and easy to understand vid I've seen so far on the GodOx 600 Pro. Bought one for these bad boys recently and have been looking for a vid like this! Thanks for sharing!

Thank You! The most informative video ever !

Thank sir for such an informative video. This was absolutely perfect!

love best vid on the 600 I have seen on KZread!! Thank you.

Great video! Took me a long time to find a simple but yet very informative video thank you! 👌🏼

Best Godox video on the internet.

This video was EXTREMELY helpful! THANK YOU!

Great tutorial. Many thanks!

woow you such a great teacher , i got mine and am confused what softbox/difuser can give me best results

Thank you.

Great Video, most helpful and informative - I'm new to this end of photography and was expecting the worst - Yet today, I'm a Smarty Pants . . . Thank you - : )

fully covered ...Thank you

extremely good and helpful review!!!! A+++++

Great Video. I'm just getting g into the Godox system. I have several Canon 600EX-RTs and I would like to use the XPro to fire them together with the AD600. I need help After mounting the 600EX-RT on the X1 and the XPro C on the Camera, how do I set this up to make me use both AB600 and 600EX-RT be fired by the XPro mounted on my Canon Camera. Manty thanks

Thank you so much! :)

Great in depth review on its features. Is the 2nd curtain synch still limited to 1/30s and lower?? This is a bit of a nuisance for me on my 200, 360 and 600 flashes! Surely Godox could fix this with firmware updates.

@Strobepro

6 жыл бұрын

It is still maxed at 1/30s. We will have a chat with the engineers to see what the limitation is.

Great, thanks

can you adjust tempterature on godox 600 mines coming up very blue or do you adjust that via camera

@Strobepro

Ай бұрын

Strobes are typically daylight balanced, and there is no way to change a strobe's colour temperature aside from using gels. Strobes do have a small amount of colour variance throughout the power range. For example, your AD600 Pro has a colour temperature of 5600 +/- 200K. The variance is reduced to +/-75K in its colour stability mode. Auto white balance (AWB) can produce mixed results with strobes. For colour neutral results, fix your camera's white balance to 5600K, or take a custom reading from a neutral grey or white.

thank you

Very Helpful Vid, thanks. I can't get the Canon trigger to mirror the AD600Pro when in TTL, what am I doing wrong?

@Strobepro

5 жыл бұрын

The display of the strobe will not reflect the exposure compensation in TTL on the LCD screen. It will show on the controller and is actually sending the TTL. Any exposure compensation showing on the the strobe display is cumulative to what shows on the controller. I would recommend keeping the strobe compensation in TTL at 0 and adjust everything from the controller.

I have two of these and noticed that when I trigger them they make a strange sound, like a spring vibrating, just after the beep, it does it with both Units, so would not think its a fault, Unit s both seem to perform OK, but I have used quadra kits and Broncolor Siros none of these make the strange sound, would you have any idea what it is.

Price and does it comes with the remote?

Good review, can you get a trigger for the GH4 or 5?

@Strobepro

6 жыл бұрын

Yes the trigger will work on both these cameras. We have the XT-OP in stock or the new XT Pro-OP will be in by the end of the month. strobepro.com/products/strobepro-xt-op-godox-x1t-o-radio-trigger-controller-olympus-panasonic

Can it be shipped to Germany?

So at roughly 24:53....when you turn on the trigger, I see SYNC on the bottom of window.....I don’t see that on my trigger....it’s always blank....any reason why? Thank you...

@Strobepro

5 жыл бұрын

So you have your controller updated to the latest version?

Is the modeling light bright enough to do a headshot inside a Octabox Inside a studio environment?

@Strobepro

6 жыл бұрын

IYou would be pushing it for a headshot in the softbox. f4, 1/100, iso 400.

@cesarebonazza

6 жыл бұрын

I'm speaking of the modeling light is that light bright enough inside a sofbox or Octabox to focus?

@Strobepro

6 жыл бұрын

Yes it’s bright enough to focus for sure.

On the multi mode, you said you can set the number of flashes and the Hertz. What does it mean to set the Hertz? Does that control the speed of the flashes?

@Strobepro

6 жыл бұрын

Yes you can set the Hertz (unit of frequency) of the flash. It basically means how many times something can happen in one second. The higher the Hertz the more flashes you get per second. This has nothing to do with setting your camera to multiburst mode for example and seeing if the flash will keep up. It is how many times the flash will fire in one frame. For example taking a picture of a sequence of movements of a dancer captured all in one shot.

@BooLee01

6 жыл бұрын

Got it! Thanks for the reply.

hi, Can I link & use this light to trigger Canon Speedlite 600EXII-RT wirelessly? thanks for your help

@Strobepro

6 жыл бұрын

No the Canon is on a different wireless system. however you can add an XRC receiver to your 600Rt to add it into the system. The XT Pro Canon controller would control both lights then with full TTL and HSS. All lights from Strobepro now have the receivers built in. strobepro.com/products/strobepro-xt-pro-c-godox-xpro-c-radio-trigger-controller-canon strobepro.com/products/strobepro-xrc-radio-receiver-canon

Is this compatible with the Godox Witstro AD-H600 portable? or is there another version of that? Pins look different...

@Strobepro

6 жыл бұрын

No they are not compatible. You need this extension head for the Pro version. strobepro.com/products/strobepro-x600-pro-godox-ad600-pro-extension-head

How about Pentax systems? K-1 for example. Will your trigger work with Pentax K-1 and what about the high speed sync?

@Strobepro

6 жыл бұрын

There is no full Pentax support yet. It would still trigger in single pin mode but you would not have HSS or TTL on any of the lights. You would still have power control and firing though.

@vadimyakus

6 жыл бұрын

Will Cactus help in this case? For example, I buy the Fuji trigger and put it on top of my Cactus transceiver... And another important question here: what about the Elinchrom speedrings? I have 5 amazing and very expensive Elinchrom sorftboxes and still want to use them with Godox AD600pro. Thank you.

@Strobepro

6 жыл бұрын

No it still won't give you HSS. For your Elinchrom modifiers you can change the speedring to bowens with our 6" speedrings. If those won't fit your boxes just give us an email because we have an adapter for $35. hello @strobepro.com

@vadimyakus

6 жыл бұрын

Well noted! Thx

@tkimaginestudio

5 жыл бұрын

@vadimyakus In the meantime Pentax support has been added in the form of the XPro-P trigger.

Nice...

Hi! Did you sell the bag separately?

@Strobepro

6 жыл бұрын

Yes we do. strobepro.com/products/strobepro-ultimate-traveller-gear-bag

Will that be compatible with my Yashica Electro 35, thanks in advance? Your friendly neighborhood Spider-Man!

Shipping anytime soon?

@Strobepro

6 жыл бұрын

Should be shipping Monday.

Correction: it’s + or - 75 Kelvin’s

@Strobepro

6 жыл бұрын

Yes, I thought it was assumed but I'll change that next time. I also said modelling lamp instead of flash tube a few times but hopefully it won't bother anyone too much.

@xperimentalone

6 жыл бұрын

I don't think so people will be bothered much by it but for the perception and admiration to the brand and the person it would greatly improve audience influence.