Goat and Sheep Handling System
Фильм және анимация
DIY goat and sheep handling system. Here is what we use to make sorting, deworming, hoof trimming, and handling much easier with a holding pen, crowd pen, squeeze chute, flip table, cut gate, and loading chute.
If you are looking for goats and sheep for sale in the Northwest Alabama area, contact me 256-668-3014 or check out our website www.rollingofarm.com to see what I currently have available.
Пікірлер: 150
Excellent! I hope we can do something like this. I usually have 6 or 8 sheep. The older we get the harder it is to take care of them. We are 70.
I know everything costs money and more of it nowadays but you've got an excellent setup there with easily obtainable materials without spending several thousand dollars on specialized equipment. Definitely given me some good ideas for my own handling system.
would really love to see more on that flip table man that's great! Love the videos bud!
@rollingofarm
3 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Troubleshooting after going over to help a fellow homesteader vaccinate an unruly, horned buck. He's about 120lbs and way more than can be handled without a squeeze chute for sure. This is really helpful in visualizing how I might help them get control of their big boy!
I jiust found your video spotlighting the flip table in particular... thanks!
My brother, who just sent me the link to this video, has modeled your flip table for use with his sheep. Now I can see why. Nice system you've created!
@rollingofarm
Жыл бұрын
Thank you.
wow, that's an amazing system.
Awesome video from “Rolling Reed Ranch”
You have an excellent system for handling these stocks. Thanks for sharing.
This was great I'm about to build a system so thanks I needed some inspiration and ideas
@rollingofarm
Жыл бұрын
Thanks
I love your handling design 🖤
Wow! You're organized! Great work!
Love this especially the flip table - as a new goat owner will be exploring all these options
I’m a little disappointed I didn’t get to see more of the baby goat! 😂 but it looks like a very fancy system!
I like your system! Your loading ramp and your flip table, thank you for sharing everything you do in your farm 👍GOD bless you 🙏🙏
Nice setup. We're looking at converting a cow chute, and definitely getting a table! Those things will make this so much easier!!
We are looking at starting a little goat operation. Thank you for the info. It is obviously well thought out and time tested.
Amazing. We're just starting our farm, and are planning fences and pens. We will definitely do something similar for our goats. Adapt it for our pigs as well. Simply perfect, small farm setup. Thanks for sharing!
This video was to the point and informative...Thanks
Great set up, great video
Brilliant. Thanks for posting this.
Simplicity always works best I found this video so Useful thank you very much mate you explain it so simple and straightforward hallelujah 😊👍🏼 Now I feel confident and I have a plan for rounding up my sheep and treating them thank you for a great video.
@rollingofarm
Жыл бұрын
Glad it was helpful
You got a nice system there and a new subscriber here. Thanks for sharing.
Great video. Great tips in all your videos.I just found your Channel, I hope to get back into Sheep/Goats this year.
That is pretty damn ingenious
@rollingofarm
Жыл бұрын
Thanks.
Watched most of ROLLING O's videos. Notice he always has a long sleeve shirt on. Something to think about when you're in the sun all day. Most of the real cowboys in West Texas where I used to live, dressed similarly.
@rollingofarm
2 жыл бұрын
Good call!
Really cool setup 😍
Sir. Your Idea is so great^_____^ Two thumbs up~~~
Great design! Perfect for small farmers. Would love for myself to be able to build a small pen like this one for sheep and stocker calves
Very very nice. Impressive setup.
@rollingofarm
2 жыл бұрын
Thank you
Excelente. Te saludo desde Argentina. Tengo una pequeña granja, dónde crío cabras y ovejas lecheras, pues, hago queso. Tus instalaciones son muy parecidas a las mías. Coincido con tus vídeos. Explicas claro y bien. Felicitaciones
nice system helped a lot
I like this, thank you, My goats like to lay down in there.
Awsome setup , I’m barley starting with goats , I have 8 goats now my goal is have 30 does , I looked into similiar setup from a company and I was looking at 15k+ , love your setup ! Thanks for sharing
@rollingofarm
Жыл бұрын
You are welcome
Nice system!
I love your handling system, can I copy it? Lol
Well done..has off !!
Nice set up
Great Vid! Would really appreciate a followup vid on the flip table 😊
@rollingofarm
3 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Fantastic.
Awesone video.
This great thank you so much
Very nice!
@rollingofarm
8 ай бұрын
Thanks!
The best!
Love the system. If possible I'd like to see your slide gates a bit more in depth and the flip table.
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Man that was awesome! I have to create this. Would love more info on this and the flip table.
@rollingofarm
2 жыл бұрын
Thanks. Check out this video on the flip table. kzread.info/dash/bejne/dYaWtbinhbebntY.html
Very helpful, thank you. It would be helpful to know also how wide the alley is. Did you also build the gates and the flip table?
@rollingofarm
3 ай бұрын
Alleys are 20” wide. I did build the flip table. I have a video on it as well.
Very nice
@rollingofarm
Жыл бұрын
Thanks
Would love more information on measurements to your set up via this video and equipment used.
@welterprado757
Жыл бұрын
Yes, measurements would help! how wide is the chute?
Really like the flip table. I'm needing to make my own. Can you please show me details on how to build my own. Maybe some measurements too.
@rollingofarm
3 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Very nice setup. Clean and functional. I'd like to see a video on how the flip table is made.
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
this is genius
Decent system.
Ingenious...where did you get the slider gates?
What aset up great work
@rollingofarm
Жыл бұрын
Thanks.
That flip table looks amazing. Can you please share how you made it?
@rollingofarm
3 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Thanks for sharing, love and would like more information on the Flip Table, did you make that yourself, or is it a purchasable item? We're in Tasmania, Australia, and in the process of setting up a Goat Dairy. I really like the way you've setup those runs, and will think about designing something similar. Have subscribed, and will have to check out your other videos.
@rollingofarm
3 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
This is an awesome set up!! Good job! What type of woven wire fencing did you use?
@rollingofarm
Жыл бұрын
Thanks. For my handling system I use 48” goat and sheep wire.
That’s an excellent “flip table”, did you make it? If so can you please do a video about it.
@rollingofarm
3 жыл бұрын
I just made it out of an old workout bench I had. Thanks for the suggestion. I may try to do that.
@mattallen9546
3 жыл бұрын
@@rollingofarm I can't wait to see this
Just want to say thank you for the video. I made my first handling system earlier this year out of pallets and it didn't work so well. Now I've read up more on how best to design it from a sheep's point of view I came across your video and it looks a hell of a lot easier than my current one. it is so wet here that I can't get my truck and trailer over to where I built it. Didn't occur to me how bad it would get. So I'm going to look into tearing it down, relocating it to the other opposite end of the field and starting again. How wide is your race/chute please? Mine was seemingly too narrow in one point and too wide in another and they got stuck. #Rookieproblems
@rollingofarm
2 жыл бұрын
My chute is 20" wide, which is too wide for most ewe and goats (they can turn around in it), but I want to be able to fit my largest rams through it too.
Hi Nice video. Could you please provide the complete dimension of this system. I would like to setup same kind of system in my farm
Nice
oh man, I need this. If you turned these into plans and materials, I'd buy those from you. ANy chance you might document this setup and sell them as plans?
@rollingofarm
Жыл бұрын
Maybe. Thanks for the suggestion.
@jeffery19677
10 ай бұрын
@@rollingofarm I'd pay $20.00.
I need a flip table like that where did you get that or if you made it I would love to know how with a another video excellent video thank you for posting
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Thanks helpful. Where can find nice simple flip chute like you have. In Kansas beef country. Or someone have plans could build one.
Could you please share where you purchased that squeeze chute? We have been looking since seeing your video and can’t find one like it. Love Love your videos.
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Love your system. Have you tried to make it portable?
@rollingofarm
Жыл бұрын
I have not tried to make it portable. I have all of my paddocks funnel into my working system. I believe it would be possible to move the flip table (but not easily), and the rest could be made out of portable panels.
Very creative & efficient! Your tilt table... is that a specific purchase or did you cobble it together? If purchase, could you provide a link? If cobbled, do you have plans? Thanks!
@rollingofarm
Жыл бұрын
I made it. I have a separate video for it.
👍👍
Hi, Do you have any kind of setup to weigh the sheep. ? Please share your ideas.
nice
@rollingofarm
4 ай бұрын
Thanks
Number 10
How did you build your sliding gates? I'm not far from you so I might come check them out
@lonnieoldag9011
3 жыл бұрын
I built the sliding gates out of old hand railing. I may try to do a video on the sliding gates because they are very handy.
How did you make the thing to turn them?
Great system! Did you purchase or make your sliding gates?
@rollingofarm
2 жыл бұрын
I made them out of some old handrails.
@jaymond80
2 жыл бұрын
How wide is your chute?
@welterprado757
Жыл бұрын
@@jaymond80 that is my question too!!
How big should a flock to be for a handling system to be useful?
@rollingofarm
Жыл бұрын
I would say it is useful with any size flock, but over 30 animals it becomes really helpful. It also depends on how easy to handle your animals are.
Sir how wide is your system am thing about 20” or so?
Hey mate any reason why your sheep panel and all got tin over the the blind panels is this so shgep cant see through make walking through bettet
@rollingofarm
4 ай бұрын
It actually makes it a little more difficult to get them to enter the race, but keeps them from getting legs or head hung as you work them. And keeps them moving to the end once in the race.
How high/tall (in feet) does the metal siding go up to? Is it just 1, 36" panel?
@rollingofarm
Жыл бұрын
Yes. It is just 10’ sheets of 36” wide roofing tin.
Sir did you build your slide gates. Or buy them
@rollingofarm
2 жыл бұрын
I built them out of some old hand railing from a school that was being torn down.
Do you have basic plans for the flip table?
@rollingofarm
6 ай бұрын
Foot Trimming "Flip Table" kzread.info/dash/bejne/dYaWtbinhbebntY.html
What are the sides of your shoot made out of? Thanks
@rollingofarm
2 жыл бұрын
Treated 2x4 and 3' wide galvanized roofing.
Is the fixing machine homemade or factory-made ? I want to make a homemade one, you can take a more detailed picture about it.
@lonnieoldag9011
3 жыл бұрын
It is homemade. I'll try to do a video of it soon. Thanks.
@user-zf3ju4wv8v
3 жыл бұрын
@@lonnieoldag9011 Thank you very much. This is important for me, as we do not have such videos in Russia.
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
Where did u get your flip gate to trim sheep feet? Did you make it?
@lonnieoldag9011
3 жыл бұрын
I did make the flip table out of some scrap metal I had around.
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/dYaWtbinhbebntY.html
@jayrolfe3338
3 ай бұрын
Can you post a detailed video of the flip gate?
Do you worm all at the same time or check eyes
@rollingofarm
3 жыл бұрын
I check eyelids color. I think deworming only the ones that need it helps prevent producing resistant strains of parasites.
@Lindseyfarms270
3 жыл бұрын
Love the handling system gave me some good ideas
@kathrynclark20
3 жыл бұрын
I use Shaklee Basic H for reworking. 6cc monthly on their feed or the soap can be placed in their water. The soap disintegrates the exoskeleton of all worms- barber pole as well as other gut parasites. Non-toxic. Google for more info.
Would you be willing to share a drawing or dimensions for your flip table? I would like to make one like this.
@rollingofarm
9 ай бұрын
Foot Trimming "Flip Table" kzread.info/dash/bejne/dYaWtbinhbebntY.html
Roughly how high is that chute ??
@thetrufflefarminc.lagottop2069
2 жыл бұрын
PS.... I totally copied this system and it worked like a charm. Many thanks.
@rollingofarm
2 жыл бұрын
The chute is 36" high
How wide is the chute, and how high, I'm about to build something like that, do you sell any drawings.
@lonnieoldag9011
3 жыл бұрын
Sorry, I don't have any drawings. My chute is 20" wide which allows the biggest rams to go through, but also allows smaller ewes to turn around which can be aggravating. Some make it as narrow as 16".
@mattallen9546
3 жыл бұрын
@@lonnieoldag9011 how high are the walls?
@rollingofarm
2 жыл бұрын
@@mattallen9546 3'
Hi Sir... Is goat farming a profitable business? Pls advise🙏
@cndbradley4423
2 жыл бұрын
kzread.info/dash/bejne/gIyKz6SomJy4daQ.html
@rollingofarm
2 жыл бұрын
It can be.
How much 🐑
@rollingofarm
Жыл бұрын
The sheep I have available at the moment are $250-$300 for ewes and $325-$500 for rams.