I don’t ever leave KZread comments or believe these quick fixes…but dang after two years of frustration I tried this and now she’s mint 🤙🏻

Wow!!! I figured I had a bad electronic component that could not be repaired, and it was going to end up costing me close to $200 !!! Thanks for the video!!! I realized your dial was Celsius instead of Fahrenheit, and saw someone else didn't understand that until you explained. Awesome video!!!! You saved a lot of folks a lot of time and a lot of money!!! Thank you so much!!!!

You sir are the man, mine just started giving me problems and I was thinking it was going to be a few hundred dollars to fix. THANK YOU!!

Amazing,. You saved me $200 cash this works.

Awesome!!!... My '04 Suburban's control stem is behind a closed panel, so no way to get the contact cleaner to the contacts. I used a 1/16" bit, drilled a small hole above the stem and squirted in a little WD-40, turned the controller back and forth a dozen times and bingo!

I just tried this on my suburban that was having this issue and it worked like a charm👌🏽 Thank You so much for this video🙌🏽 it is greatly appreciated!

I could hug you bro. I never would have thought this. You saved our winter months!

You are the fucking MAN! Thank you Sir! Been putting up with it for over 10 years.

On my way to Walmart to buy this right now. If it works you are my HERO. 5 years and it was this easy to fix!!!! Will update my results.

Dude, really? If this works, I owe you a beer or something. Lol. I'm trying this first since I was sure it was an issue with the circuit board or some kind of control module. I'm in a 2005 Suburban and the passenger side dial is doing the same thing. It's coming into winter but when I turn the dial up, the temp keeps gradually going down. Very frustrating. Thank you very much for the information!

This is legit! I’ve had this problem for a few years and finally decided to replace it. I was looking online for replacement part and saw this video and resolved it and now I don’t need a new part. Thanks for the tip!

@paulnierenhausen7840

Жыл бұрын

OP

@paulnierenhausen7840

Жыл бұрын

Ooooo

Just bought a 2003 Sierra 1500HD and was worried it was gonna be a expensive fix but I'm hoping your method works for me.. thanks so much for posting this

I had the exact same problem. Did what the video showed. Worked like a charm! Perfect!!! For once you try something as shown and it works!!! Awesome!!!

You saved me alot of money, I was about to buy one on Amazon.... but spent 3 dollars on some spray and VOILA thanks a million

Just found this video! Thank you! Didn't know what the issues was. Genius! Worked like a charm.

Thanks. I was looking for a video that showed me how difficult it was going to be to pull apart the unit to clean the contacts, and you gave me this! THANKS!!!

@jasi8051

5 жыл бұрын

No worries!

THANK YOU! Just saved me at least $120 replacing the unit and install time

@dennischristian9976

3 жыл бұрын

Same here ...$5.00 bottle from a store near by fixed a major point of frustration for me. Thank you!

Thanks for this vid. I have a 2003 Envoy with the same issue. I have been dealing with this and just use the steering wheel control. I will give this try and hopefully this works for me.

Thank you! This just saved the day! I had the exact same problem on my 2003 Hummer H2 with the same type of unit - and this fix it!

Thank you!! This worked on our 2005 GMC Denali

Thanks for the video. Solved the problem as advertised.

Just what I was looking for. Thanks!

Worked like a charm. Thank you.

I have been suffering with this problem for years, why the hell didn't I think of this. Worked perfect!

@jasi8051

6 жыл бұрын

Thanks. I just did it one more time the next day as well. Has been fine ever since.

Thank you so much for this video!

Genius! Saved me from jumping to replace it! Thank you!

Worked perfect on my truck thanks

Ugh so frustrating, thanks for the video!

Thank you!

This is great to know! I have this exact problem in my 2002 Envoy. I need to find my contact cleaner...

Gee, thank you, I'm going to give this a try tomorrow.

BIG THANKS FOR THIS VIDEO🙏🏼

@jasi8051

6 жыл бұрын

No problem. I had to do it one more time.....was good after that.

You.....are the man

Wow. Thank you so much !

Dude awesome

Got that problem, thanks

My 2004 Trailblazer does that,

Any idea on how to switch from C to F on the temp controls?

@jasi8051

2 жыл бұрын

Try this …… You go to the “i”on the steering wheel It is the dic, the driver informed center, and scroll the the settings. When you reach the meteric you change it

What if the display is not showing

Looking for additional help on this one. The contact cleaner works immediately upon spraying it and working the dial, but by the next day, it's back doing the same thing. I'll try using more contact cleaner to see if it eventually works all the time, but wondering if anyone else has experienced this. The fact that it seems to work immediately upon using the spray but then is back to being erratic the next day unless I use spray again has me scratching my head. Thanks

@jasi8051

4 жыл бұрын

I had to do it twice. Was fine after that.

@jenniferhorman2352

4 жыл бұрын

I keep having the same issue, but can't figure out what I need to try before replacing it.

I see your temp is in c how do you change it to farenheight?

@jasi8051

3 жыл бұрын

I am not sure. It came this way from the factory here in Canada....maybe in the “units” setting where your odometer screen etc is?? I never tried to change it.

@johnniewilliams5214

3 жыл бұрын

@@jasi8051 I just figured it out. You go to the i on the steering wheel It is the dic, the driver informed center, and scroll the the settings. When you reach the meteric you change it to English. Thank you!

What was the actual spray you used?

@jasi8051

5 жыл бұрын

Electric contact cleaner. Up here in Canada this brand is made by “motomaster”. It’s available at most auto part stores.

@jasi8051

5 жыл бұрын

I show the can at 0:23 in the video

@brendasmart2973

5 жыл бұрын

The video stops playing

You are the f****** man thank you say me a bunch of money

What’s wrong with it why won’t it go pass 32 that’s what mines is doing how did you fix that

@jasi8051

4 жыл бұрын

I believe that is the highest setting....this one is in degrees Celsius....32degrees Celsius works out to almost 90 degrees Fahrenheit....

@dennisscott318

4 жыл бұрын

Mines is blowing out cold

@jasi8051

4 жыл бұрын

@@dennisscott318 Have you tried recalibrating it? Worth a shot.... there is a few videos on you tube. If not, I am not sure what might be wrong with it.

@jasi8051

4 жыл бұрын

@@dennisscott318 another issue is (common) the blend door actuator in the system is physically broken/stopped working. This door switches the air from warm to cold

@patrickcowan8701

Жыл бұрын

@@dennisscott318 First flush out the dash heater core,reverse flush hose on the right before you check all the actuators they're hard to reach and the core's plug up all the time.

Can WD40 be used instead?

@nicolasraage

5 жыл бұрын

That most likely will not work, and likely cause a mess and more problems.

@bewitchedgirlsman

4 жыл бұрын

That's a negative

@LIVINGDOG

2 жыл бұрын

WD-40 is actually a great contact cleaner... but use sparingly... worked for me on multiple electrical contacts issues as well as the fix for this issue.

I tried it lasted bout 10 minutes :(

@jasi8051

Жыл бұрын

I had to do it twice. You may have to do it two or three times to get those contacts clean.

@roltyd22

Жыл бұрын

@@jasi8051 ok I'll hit a couple more times i really cant get the tube in past the knob stem and plastic cover but I'll fix that with a little blade