Updated description with links to 12pc & 25pc kits of all 4 colors. Use code (YTLEDSALE) for 10% off!

Thank you so much for being so thorough! Just did mines .

I am impressed with the thoroughness of this video. I was concerned that I would have to do trial and error to get the polarity of the LEDs correct. Your presenting the chart to show each individual LED position was a great aid. I decided that I would use a solder sucker to clear the holes. I don't like to overheat connections and braid also applies more heat than I desire. Thank you, FUS Attempted Repair for a very helpful video.

Thank you so much for being so thorough!

I will be doing this on mines , thanks for the video I’ll revisit when I do mine

Killer video, fantastic, the lights in my Tahoe are so dim, thank you!

Awesome video;Thanks.

, thanks for the video I’ll revisit when I do mine

Now you just need to do the window remotes ! Great videos

Great resource thanks!

Good video thank you

muchas gracias por compartir su conocimiento

Just curious, there are 11 bulbs to that cluster, but yet the LED kit you listed the eBay link to is a kit of only 10 LEDs

I soldered my bottom row and the lights don’t come on at all. I had positive in right spot . Wonder what happen

Do u know if i would be able to add these typ of gauges to my Silverado or would i have to change the pigtail on mine i have the other type with the climaiin the middle and not the knobs

How would I determine if I have # 4892 or 4893 diagram? Thanks you.

can you fix the dim led readout though? if so where do i send it. i have the aftermarket version in my truck, oem went out long ago

Is this Polarity diagram the same for a 2008 trailblazer LT

You have any videos on clusters for these year trucks ?

Hey do you guys sell a kit that has bulbs for the dash cluster, light switch cluster and climate control? I’m trying to get them all at once instead of buying each kit seperate, I ordered my dash kit from tachtronics but haven’t gotten anything back from them lol

Is the polarity the same for 06 trailblazer with manual ac? Thanks

Very nice and informative video. A question please. My numbers are skipping very bad. Even if you turn clockwise to increase the temperature, the numbers go up and down. I might can get it to 72 and one more turn will make it go back down to 60. Will the Deoxit spray fix this and would I have to take the front black faceplate off or can I get away with it by just removing the buttons while the unit is still installed in the car? Kind regards.

@user-um7tr5up1t

4 ай бұрын

worked for me and I used mass airflow cleaner

Hi. Thanks for your videos!! I have learned so much what I need to do to switch to blue LED’s in My 2005 F350. The problem is I don’t trust myself doing it and I can’t find anyone anywhere around to do it. I need to do my climate control, info, and steering wheel controls. Would you be interested in in doing them? Of course for a price. I have everything tore apart and ready. Also I have the LED’s. Please let me know. Thank You.

Where can I download those diagrams for polarity sir?

Will the dimmer switch work with the CUBE LEDS...? Will the LED DIM with switch

I did mine, they lit up, for about a hour nd then all my lights turned off, what can it be?

What pins are negative and positive?

How can I rebuild it so the buttons are accurate with the numbers as I move it up and down. I move the nobs colder or hotter and the numbers jump all over

@artiklo

3 ай бұрын

That's the deoxit spray he mentioned, removes any oxidation within the knobs causing the numbers to jump around. If that doesn't fix it, you'll need to replace the bad knob.

Great video! I didn't trim the LED leads until after soldering them in. Makes it easier to make sure the orientation is correct. I used the link to buy the LEDs on eBay. They are sold in batches of 10. Unfortunately, you need 11 to replace all of them. Had to get an extra one to do the complete job. Why not sell in batches of 12, in case someone makes a mistake?

@Vault-TechSolutions

6 ай бұрын

I do plan on offering a 12pc kit for that specific reason for the auto climate controls. It’s the only module that uses that many on its own so it’s kind of an oddball. Have just kept it to 10pc and 25pc for a while just for ease of packaging

Can u change the led screen to white?

Where do you buy the led lights?

Great video. I do happen to have the other version board with the plug at the top. I don't see the revision comment if the specific light positions you pointed out are the correct ones with reversed polarity for the lights. Were you right on those positions?

@mikebowen7316

Жыл бұрын

Did you get an answer yet? mine is the same (the other version)

@charleyismael8669

Жыл бұрын

@@mikebowen7316 no reply

@mikebowen7316

Жыл бұрын

@@charleyismael8669 ok thanks

@Vault-TechSolutions

11 ай бұрын

Here is a link to the polarity charts, will be adding more postimg.cc/gallery/Fz9FKjq

@mikebowen7316

10 ай бұрын

@@Vault-TechSolutions appreciate this! Helps out tremendously. Thanks again...

Ur a saint

Do you sell these already with blue led?

The climate control in my silverado 2005 is not automatic, and has two different lights, the centers ones are 6v and the rest are 3 v, can I use the same square led in all places? Can you help on this?

@j1mmyv707

11 ай бұрын

Yes you can but the center 3 volt may be dimmer than 6 volt . Most 5mm LEDs are 3-6 volts.

@hannibalgenial7938

11 ай бұрын

@@j1mmyv707 I have 50 blue leds of 3mm and they are 3v. I installed one of those on the center with a 1k resistor, and works, but I just put one. And I do not know if I can install this LEDs directly on the rest of the places. What do you think.? This 3mm LEDs are clears.

@Vault-TechSolutions

11 ай бұрын

You can use the 5MM 12 volt cube ones i listed for all the bulbs on your 05 Slider style climate. The leds have a resistor inside them so they work from 3 volts to 12 volts

❤❤❤

i cant fin this climate control led for tahoe 2002

Que. Numro de foco lleva

Link to polarity charts postimg.cc/gallery/Fz9FKjq

i installed exactly how the diagram was and had only 2 working

@cody6.6max

4 ай бұрын

I had none working wtf

are these 5mm leds or 3mm?

@Vault-TechSolutions

6 ай бұрын

5mm , if you don’t want to modify the blower speed control you can put a 3mm one there also. Working on making a listing for a kit with the x10 5mm and 1 3mm for that reason

Can I just send the cluster and climate controls to you and pay you? Lol

You didn’t show how bright they are or the color at all

@tommymac3029

6 ай бұрын

He showed the board powered up and the LEDs lit up at 15:40. What more do you need?

i just dont understand why people dont take care of the fingers loose skin just hanging out. cut it before you film it is nasty. simple use nail clippers sorry but nasty.

@dalemccallum8945

8 ай бұрын

😢🎉😂🎉❤😂❤

🔥 【ｐｒｏｍｏｓｍ】