awesome video of your knuckles

THX, got mine in the mail yesterday, Also IF they did not flush the cooler the shavings may still be floating around from your old one.

@RAMBLE_ON

2 жыл бұрын

The dealer installed the new tranny, he said flush was done. I will know at next tranny fluid change

This would have been a good video if I could see the installation

@RAMBLE_ON

2 жыл бұрын

The installation consists of 1 bolt attaching this piece to the transmission. Not much to see. very easy to remove and install

@superiortransmissionpartsi5357

2 жыл бұрын

There are several that customers have done for us on their own about our technology. It's something I've not seen in 45 years of doin this for a living 😎

@superiortransmissionpartsi5357

2 жыл бұрын

When someone wants to get the word out to their followers and channels if you go to our Superior yt you can see some there and we are working on more now that COVID disappeared. 😂

@superiortransmissionpartsi5357

2 жыл бұрын

It shows me you don't need a technical background to see if it's plugged...your in deep dodo, or up North cold below zero slurp-ie... It's a true grand slam product.

We’re did you get this delete kit thanks

@RAMBLE_ON

2 жыл бұрын

Global transmission parts. $32.00. Very easy 10 minute mod to do. You will lose about 3 drops of tranny fluid. Easy to do and no mess

Does work for the 07-13 6l80e

@RAMBLE_ON

2 жыл бұрын

I know this works on all the newer model gm trans 2015 and up. Dont know about older models

I don’t get it,if you’re going to leave the temp controls out why not by-pass it to begin with.with temps like that I wouldn’t have one at all,I’d have a cooler the size of a refrigerator!this is what you use with varying temps not all the time hot temps.I’d add fluid capacity and bigger lines and cooler and call it a day

@RAMBLE_ON

Жыл бұрын

Because you need a working bypass in your system, especially if you tow. 3 GM suvs thus far totaling 200 thousand miles (lots in death valley heat) and not a single issue

I saw another video where the guy dropped the second piece you removed with the brass just drop it in with small side down first then put the spring in the top piece and install the snap ring that's the way I'm going to fix mine free,Thanks for sharing!!!

@RAMBLE_ON

2 жыл бұрын

"Flipping" method works. I just dont mind spending $35.00 on a $55,000 vehicle on a proven product being sold by a well known company.

@jjaimevillalobos1118

2 жыл бұрын

Do you a link for that video will that work on a 2014 gmc sierra tia

@superiortransmissionpartsi5357

2 жыл бұрын

But it doesn't allow a working bypass? Good luck, when it melts, send us a pic so we can use it for education. Heck just take the lines off and run straight tube? No thanks. Nothing is free

@RAMBLE_ON

2 жыл бұрын

@@superiortransmissionpartsi5357 I have had zero issues with my tranny running so much cooler. I was in death valley last august and outside temp was 134F, yes 134F and my tranny temp was only at 140F instead of 194F per GM. Great product..........

@superiortransmissionpartsi5357

2 жыл бұрын

But, if you loose flow your toast, as your bypass is plugged off. Ours keeps the bypass functioning when demand calls for it, otherwise it's full wide open, protecting the cooler and lube circuits, one of them you just plugged. So for 45 bucks it's worth the risk? Maybe if your trading it in. ?

What does your engine temp run on average?

@RAMBLE_ON

2 жыл бұрын

avg 140F temp daily use

@29auto30

2 жыл бұрын

@@RAMBLE_ON Engine temp?

@RAMBLE_ON

2 жыл бұрын

@@29auto30 Even in 134F Death Valley heat, my engine temp has never gone above what is normal on the gauge. I only use Molbile 1.