four pages of written notes later, im feeling a bit more confident with this program. thanks man!

One of the best tutorials I’ve seen in fusion cam

Really helpful to see how to setup these multiple passes. This is what I was still missing.

Fantastic video. Watched 100 fusion 360 videos and this one of only 2 that I found to help with my situation. Thank you very much.

Great tutorial! Thank you for taking the time sharing.

Hello! Thank you for this great video. I was wondering, how do you determine what size endmills/bits you need? Will Fusion 360 give you an error if you picked the wrong size? Also, you mentioned there were resources for determining speeds/feed rates, can you please share those? Finally, I didn't see an answer to the comment below, but he asked how you were able to zero your 2nd and 3rd bits after facing the whole piece of stock?

Nice for beginners. I was trying to understand how to setup and add specific data from Lars videos. He explained everything very detailed but there was too many things. In your video it looks nicer and easier :) I'm trying to switch from Vectric Aspire so everything I have to learn from the beginning. Thanks so much!

Regarding the contour outline, have you tried creating a base feature on the model and then converting mesh to brep? usually this is a good way to do it, but doesn't always work well for high complexity models.

Man thank you for this video this has really been a great resource for getting me started with my cnc machine. Top quality content my dood.

Great how to! Two comments... do you have a bit setter? I'm wondering how you were able to zero your 2nd and 3rd bits after facing the whole piece of stock? And next, what prevented your 1/4" adaptive clearing pass from cutting the model out completely?

Thanks for the tutorial, I have just made my first engraving of a bas relief following the method explained in your video

Great tutorial! Thanks a lot for sharing.

Thank you. A LOT of help!

excellent tutorial you explain things so people can understand, one suggestion though answer some of your questions, don't take my comment as hate because this really was a great video, i learned a few new things.

Long video but worth every minute of watching it...awesome it was a refresher for be I am back on track to sending by GCode to Easel too

Excellent tutorial. Thanks,👍

So helpful! thank you

Hello. This is a great video. I just purchased my first cnc/laser engraver 3018. I have a question. I want to make a branding iron for myself. Is it like the same process in this video or easier? Also watched your rubber stamp video but unfortunately there was no technical explanation which i need :) so decided to write under here.. Thanks in advance.

Superb tutorial.

Thank you for the information. Being very new to fusion setups, my next question may seem obvious. For the adaptive clearance cnc bit - one obviously needs to probe Z top height and X & Y outer corners (based on the stock corner chosen or box point); but for the parallel path the cnc bit is changed to a bullnose - and while one does need to probe again Z tool height again, do we also need to probe the outer corners X & Y again? .....It can get a little confusing when you consider that the silhouette cut for the adaptive clearance bit is set to "tool outside boundary", while the parallel path bullnose bit chosen is set to "tool centre on boundary". Does fusion just do the calculation for you when you go from one bit to the next "for the x & y box point", or does one have to probe X & Y again (in addition to Z) for each cnc bit change?

That was really well-explained mate but I was just wondering if you have a videos on actually sketching a 3d image in Fusion. Cheers

Man fusion360 is so damn difficult to learn. Stressing me out. Appreciate this video.

@jan90219021

2 жыл бұрын

man tell me about it

Thank you for this video :) awesome work, but shouldn't you logo be M||B rather than M(b)? or "outcome ? make : break"

You got a really good microphone. Not so much as a minute in and first thing I note is that it's not like you're in my room, it's like you're talking in my ear.

My body shows it being 267" is there a way to rescale the model in fusion?

When I do the 2D Adaptive Clearing and the 2D contour I get the Rapid Collison with stock warring, at the very start when it places bit into the stock to start cutting. How do I fix this?

Thanks for this tutorial. I followed it to the extreme and I also have the x-carve. Couple things is this is my VERY first project in fusion 360, so it took me a long time to get everything dialed following your steps. I appreciate the thorough-ness of everything. Few daunting parts about "you'll have to get all this dialed yourself" when I know nothing about the program is a little intimidating, but I just followed your lead and am about to go try and cut this thing. Also side note, I took a screen shot of fusion 360, threw it in illustrator and just did a trace draw and deleted the paths inside, and it did seem to go a little quicker (Even though I lost my scale tool bar and couldn't figure out how to bring it back up) but also was way more precise on the edges (or so it seems, will let you know after the cut). Thanks again!

@Damien8787

3 жыл бұрын

How did it go?

Is this also possible with the the free hobby version of Fusion 360?

but if it is for complete begginers you need like NO1 set z up in settings ,,normal way is y up that way it will carve side of it not z :)

hi there by chance could you give us a tuto for 4 axes Rotary lecture

Hi! Thanks again for a great tutor. Im stuck tho, and hope to get some help. I get "Warning: Empty toolpath." when trying to do adaptive toolpath as you are doing. Why could this be? thanks

@bwhitehead

2 жыл бұрын

When you post, there is another tab that will allow you to select which operations for which to generate g-code.

at 10min in you go to geometry. When i get there i have a different panel than you got. Is that because you used face mill and i used the only tool i have (1,2mm flat head)?

@quaziz

3 жыл бұрын

I learned a lot from this tutorial up to that point :) Thanks a lot! Really great and explaining tutorial

What 2" endmill bit do you have/recommend?

@makeorbreakshop

3 жыл бұрын

I get most of mine from Tools Today or Bits Bits!

When I import the "mesh" 3d file, I get a mesh body instead like your nice 3d model...why is this so?

@Grumplefut

2 жыл бұрын

Same here. And mine is enormous compared to his. Mine is importing at 142 inches

@sparkfire1223

2 жыл бұрын

@@Grumplefut Did you figure out how to fix this?

Great video, might i suggest talking a wee bit slower, and possibly mentioning your key shortcuts as you go. You have the issue where you speak quickly and just click around not really describing everything you are doing. Its the most obvious thing for you, but not for someone learning fusion 360.

i cant for the life of me figure out fusion 360. too complex. Doesnt help that they redesigned the GUI and most video's use the old one..

great video, but dude, get a filter for your mic or edit out your swallows. I barely could get through this video

lol using crapple :)

why cant people just show you how to do something slowly without all the extra talking..nobody knows how to show people without confusing them..you cant keep jumping around to whatifs and talk about things that dont have to do with the very point you are trying to explain..re do the video..slowly start doing it without all the talking,,just explain what you are doing..

Is there a way in Fusion 360 to create 2.5d from vector or any other picture?