Pulling my hair out too. The process you layout is super helpful. The operation "New Component" was exactly the tip I needed. Not a week into my P1S and already appreciating the community!

Thanks for this video. I’m learning f360 now and really appreciate these no nonsense workflows.

This tutorial is great !! I was close to rip my air off painting the models with the paint bucket . Thank you so much

I recommend selecting Only one wall on first layer. It will really clean up the look on that surface even more. Great video, thanks!

Thank you so much!! This was a PERFECT video and so in-depth! I have been banging my head against a wall with this stuff for months! Thank you! Thank you! Thank you! 1000 times!

Best tutorial ever, just THANK YOU!

Thanks for sharing, Great Job! This helped me out a lot.

Great tutorial! A friend asked me to design and print a coaster, I'm so glad I found this tutorial! I love the tip for coloring the coaster!

This was way easier than what I had been doing. Thanks so much for putting this together. Learned how to do certain things faster!!

Just great, thank you very much!! 😀

Thanks for showing how to do ❤ Great Job 👏

Thanks for this video, best tutorial yet, I’m gonna try this 👍

So I'm having issues with the extrusion. I finally get it to look right but the design is still raised above the rest of the print. The top layer isn't flat. What am I missing?

Great video

Very useful, thanks 👍

As a Tampa Bay Rays fan I thank you for this tutorial. I’m looking forward to completes this project. Well deserved like and subscribe. #GoRays

@Ryanlit

5 ай бұрын

Thanks so much! Go Rays ! I see the stadium everyday from my house

this is an awsome video. your the man!!! thanks

WOW, I actually was able to follow along. use to make coasters in 3d builder .. this was way way easier. Thank you.

Dang he out here making more tutorials! lets goo!

Excellent tutorial. I designed and printed exactly what I needed in no time at all. Great job!

@Ryanlit

5 ай бұрын

Glad to hear it worked

Thanks, it helped a lot!

@Ryanlit

6 ай бұрын

Glad I could help

Cool , great tutorial,liked and subbed 👍

Thanks 🙏

Great tutorial, just need to purchase an AMS now 🙂

Dude, this was super useful. Im Really Enjoying your lessons videos!

@Ryanlit

5 ай бұрын

Thank you so much. Means a lot

@brandonmows

5 ай бұрын

@@Ryanlitthat’s a great video loved how simple it was to follow along and simple it made the process for beginners to fusion360 I’m used to the paint bucket method but this will help me in another project to get smoother color changes

Ok waiting on my first printer to arrive... going to try and make one with ny logo... fingers crossed

NICE!

@Ryanlit

6 ай бұрын

Thanks!

Thankyou! Can you do a video on .3mf files? I am just learning to make my own designs and it seems 3mf is the way to go over .step?

Nice 👍 thx

@Ryanlit

6 ай бұрын

Welcome 😊

Interesting, When I follow your process (step by step), the "image" (in your case the TB) when laid flat on the build plate is backwards.

Im still missing how you made the logo flush to the surface of the coaster. did i miss that?

@Ryanlit

3 ай бұрын

Extra use everything by 1mm to make it flush

tutorial seems to work great apart from a few things unless im doing something wrong? when i extrude the back at -4mm but then extrude the svg at 1mm it sticks out of the back of the model at 1mm i have to them extrude the back again at 1mm to make it flush, does this make sense? ive tried to follow it step by step but this keeps happening

@Ryanlit

2 ай бұрын

Try reversing to -1

I put my friend's baby's face and name on one. If you watch over the print, when it starts to fill the text after 0.5mm (in my example below) do a color change, let it complete the layers to fill in the text, then switch back to the first filament and your text will be another color. Use a PEO print bed plate and it can be smooth like glass and if you get one with a hologram in the print bed, it'll be on the coaster.

I could do this in my sleep. Fusion seems intimidating... it's not. It's you over thinking it. Coasters are simple. Find the logo you want. Convert it to SVG file format. Open fusion, create sketch on bottom plane, make a circle to the size you want the coaster, insert your logo svg, align it the way you want. Finish the sketch. Select inside the circle and leave the logo unselected. Extrude up 0.5mm. Select the area of the extruded body. Create a sketch. Make another circle over the first circle. Finish sketch. Extrude up 4.5mm. Select the top surface. Create a sketch. Make a circle about 20mm so that the edge of the circle aligns with the edge of the part. Select the circle and then select under "Create" menu, "Circular Pattern". New menu pops up. Click "Axis". Select the middle point of part. It should automatically create three circles symmetrically around the part. Finish sketch. Select all three circles. Extrude them up 3mm. Send to print. Congratulations, you have made a drink coaster.

@jiaj1985

2 ай бұрын

make your own vid

Hi doing everything exactly like you say but for some reason when I select the -4 I get a lip not a solid block it is see thru with a -4 side edge if this makes sense not sure why I have tried over and over it just won't go solid only a lip :( help and the colorful design is higher on the top and not flat how will that work for a coaster for things to sit on? what am I doing wrong here?

I followed your exact steps but it seems no matter how simple the file I choose the SVG file has too many bodies/points and is causing program to freeze. It throws an error due to too many points/bodies? Anyone else having this issue and how did you resolve it? How to reduce to amount of bodies/points? is this done prior to bringing the image into F360 at the converter level?

I as well, can not get the TB to highlight where I can choose the colors. I think I get lost at the -4mm extrusion part. I extrude it to -4mm but it sends the TB to the back of the coaster I can see it through the side profile in the sketch. The TB is at the very back of the round plate and I can see the TB but is in the rear or back of the coaster but will only allow the whole circle to be highlighted. When I flip the coaster to the back the TB can be highlighted but only a few of the lines will highlight purple and not the interior of the letter. I have extruded the parts of the TB 1mm and -1mm to see the difference on your video it clearly shows a raised portion of the TB but mine is not Raised off the coaster. When you extrude the Part to -4mm it sends the TB to the back through the coaster. I have tried to do 4mm and it shows a raised logo but still will not allow me to highlight the individual parts of the TB to color it. I have followed your video 20 times and paused it in between to try to see your settings and figure out where I may be doing something wrong. Please clarify what to click on to extrude. This seems really straightforward but I have been missing a simple process most likely.. Was a great tutorial by the way.. Just lost Anyone please chime in as well too.. Truly appreciate the assistance..

@axelsadventures3270

5 ай бұрын

Same issue here

@Ryanlit

5 ай бұрын

To extrude you click “E” on the key board if the extrude is going in the wrong direction there is I small icon in the extrude windows that shows an arrow. I believe on the bottom left of the extrude window you can click and it will reverse positive and negative

Nice video. But what if i want it flat,so text is at rhe same level as back?

@Ryanlit

4 ай бұрын

This is face down so everything is flat. It prints flat.

@jawknee21

Ай бұрын

​@Ryanlit why do different thicknesses for each color then? I think I'm misunderstanding something

Just want to see the result after the print on the both side

So I'm assuming you have AMS on your Banbu printer. What if you don't have an AMS option, how would you do this with a single extruder printer? z hop?

@jawknee21

Ай бұрын

Pause and manual color change. Z-hop is something the printer does during printing to avoid hitting the print

Ok, might be a stupid question but why won’t my cursor change and allow me to choose the sections to colour after unhiding the Sketch layer? I’ve named the Back part and then unhide the Sketch but it won’t let me click on the parts I want to colour… please help 😮

@Ryanlit

5 ай бұрын

Hmm that is odd. Feel free to reach out instagram.com/bearded_dad_designz?igshid=OGQ5ZDc2ODk2ZA%3D%3D&

@horrorshow21

5 ай бұрын

Make sure you have the sketch actually selected (highlighted in blue). I had the same issue initially.

@lxxBassheadxxl

4 ай бұрын

I'm having the same issue. Did you figure it out! ? I do have the sketch highlighted. Only way to color is to flip on backside. Then it prints backwards.

@lxxBassheadxxl

4 ай бұрын

​@@RyanlitI sent you a message via insta

@horrorshow21

4 ай бұрын

​@@lxxBassheadxxl I think you are running into an issue I also ran into. He his not using the default axis orientation, if you look at around 2:10 you will see his vertical axis is Y, i believe the default is Z (it was on mine anyway, maybe mine's not the default) what happens is all the extrusion measurements he does you need to do in reverse. So if he does -4mm you need to do 4mm, etc. This should leave you with the "image" on the front, instead of the back.

The part that confuses me is if the lettering is raised by 1mm, when you flip it face down in BS wouldn't the blue be off the bed?

@Ryanlit

3 ай бұрын

Extra use everything by 1mm to make it flush

Why is mine reversed? Your -4 is my +4. I went back and redid everything the same but its always the other way around.

@Ryanlit

2 ай бұрын

There is a little arrow next to where you type -4. Click that and it will reverse. Also make sure your doing it on the front plane view and not back

Leaving it flat and coloring it in the slicer is easier

@Ryanlit

5 ай бұрын

I like to color in fusion to confirm I like how it looks it’s an optional step. However it’s always good to label components so you can paint by object in the slicer

Does anyone know why I can't get the image on the front. It keeps loading on the back . Been trying all day. -4 on first extrude. Then +1 on all colors afterwards. Please someone help

@davidgallant2545

4 ай бұрын

This appears to be a sketch orientation issue as I had the same results initially. Instead of using Front for the initial sketch plane, use Top and perform the same steps outlined in Ryan's video. Not a Fusion expert to describe why, but I could see the SVG attaching to the back of the extrusion with the Front orientation.

Wait! We raised up the logo in f360, then we flipped it over in the slicer. Thats not flat though, its just printing that raised section on the bed, the rest is hovering one layer up. That doesn't seem right. I'm not saying it won't "melt" together. It may work but its technically incorrect. I'm printing now so if it looks ok, I guess the answer is, don't worry, be happy, lol

@SteveInScotland

2 ай бұрын

Yeah, it was not happy printing in mid-air and I ended up with a failed print. Print it the right way up and it’s fine but useless as a coaster as the image is raised up.

@Ryanlit

2 ай бұрын

It’s only floating when you failed to extrude everything forward.

I have a couple questions I would like to send you an email. Would that be possible?

I don't think the vectorizer site is free. Every time I try and downloads it asks to pay for a subscription. Nice tutorial though.

I'm saying this 28 seconds into the video.

you have to pay for that website now :(

@Ryanlit

3 ай бұрын

Yea I know …

@nickcamarata3378

3 ай бұрын

Any recommendations on a free one?