✅DAWs that Can do this: Cubase (offline process, you can always go back even after years of reopening the project) Nuendo (offline process, you can always go back even after years of reopening the project) ProTools Wavelab (very similar to Cubase) Logic (destructively- once you save, you can't go back, proceed with caution and backup your audio) ❌DAWs that CANNOT do this the way I show on the video- (at least at the moment-clip gain is not the same ;) : Reaper StudioOne Ableton Live FL Studio (there is a declick option in Edison but not a pencil tool to draw - correct me if I'm wrong)

@vacuumelite2065

Күн бұрын

Back in the early 90's was DigiDesign, which was the company that morphed into Protools. You could absolutely get the pen and draw the click out. However it was destructive. We used to take a deep breath and go for it 😶. Thank you, Dom for your splendid vids. ❤️

I'm happy that what I thought was a dirty hack is actually a pro move. I feel very validated right now

3:59 the most trippy RGB shirt ever ☠

Dom your knowledge and willingness to share your experience in such a professional and friendly way is so appreciated.

@DomSigalas

12 күн бұрын

Thank you so much for your support my friend ❤️

I've been using this technique since the '80s when I was digitizing my vinyl collection in Steinberg Clean and Wavelab. The click and pop filters did a fairly decent job, but some pops were just too extreme. I still have my Wacom tablet and pen attached to my studio PC specifically for this type of repair (and also drawing detailed automation).

@Djyahel

9 күн бұрын

Yes i also remember Waveleb 🤩

My man is not getting younger😊. Thank God for grace and thank you for all you have done for us🙏🙏🙏

@-______-______-

10 күн бұрын

wtf?

@soundsofveer1050

9 күн бұрын

@@-______-______- 🤒

@BRADONDOofficial

9 күн бұрын

Please don’t say “my man” bcos he is also my man. You should say OUR MAN. 🤩

@soundsofveer1050

9 күн бұрын

@@BRADONDOofficial 😂 yeah, our man

I was literally stressing over this today and you posted this at such a perfect timing like you knew😂 thanks a lot😊

Thx for showing us!...Been doing this for 15 yrs. :) & Yes in LOGIC ( I make COPY in case i mess anything up )

Tried it today.... so darned easy! And to think I could have been doing that all along! Thanks, Dom!

I agree about all the technical aspects of it... The technicalities

I have done this in Cubase since they introduced the 32bit float audio engine. It was the only way to engage the pen tool to edit back then.. Now it is just there for all you youngsters...

As usual, great one Dom 😊 many thanks 🙏🏼

I had absolutely no idea about this! Thanks!

Wow! Thank you Dom :)

THANK YOU SO MUCH DOM!!! I have done this for years for those pesky clicks. It makes me feel good to know I have been doing something the correct way all of these years LOL!!!

Very amazing lesson You’re blessed 🎉

This is GOLDEN!

Awesome tutorial Dom! I didn't know about this feature! you are a God sent to this community!

This originated with Pro Tools at least 24 years ago. It has also been possible literally forever to simply delete that millisecond from a soundfile, shortening it by an amount that even the performer could never hear. Technical clicks, as opposed to acoustic clicks, are ultra brief and easy to remove without artifacts.

Thanks, always with precious advice.

Perfect!! Thany you very much, Dom. Veeeeery helpful!

Once again thank you Μaster...!!!

Thanks Dom, as always educative. From Australia 🇦🇺 ❤

Big Thanks Dom

Very nice tip Dom ! Never heard about this before ! You boom it again :D

Dom, you have been the go to guy for many of my questions or problems. This definitely will come in handy. I really appreciate you talk about other products too even though Cubase is my tool.

Awesome, thanks so much!

Dang FL needs this feature🔥

to me at least, that's a shocking discovery (in a good way) i never really thought you could draw on the waveform! that's like super cool! I'm 100% gunna try it!

Thanks Dom for teaching us this, after 20y cubase i still learn, i didnt need it but of it will happen i can adjust it, thank you so much

fantastic tip!

Thank you big man 🫡

Thank you so much just had this happen tried all kinds of stuff made it worse, I cant wait to try this.

I didn't know it. Thanks!!

For me Cubase Pro and Pro Tools, The Top.

Great Sir

sick! never knew

Woh! This is amazing. I confess as a long time Cubase user, I'm one of those that didn't know! Thanks, Dom.

Danke!

🎉amazing

Gracias!!

🔥🔥🔥

Tks so much..verry good 🥰🥰🥰

WTH... I did not know this and I'm using Cubase since forever! Wow...Thank you man! 👍

Yes, this works in many cases, but not always. There are clicks that are caused by processes in the nasopharynx. These clicks are multiple and last several times longer than the click shown in the video. It is basically impossible to correct such clicks manually, since the click is mixed with a useful signal and does not even look like a click. The only solution in this case is the use of special plugins. Personally, I prefer to do this not in DAW, but in a separate sound editor (naturally saving the source file).

I Have Been Doing Thing For a Long Time But I Did Not Know If It Was right Or Wrong To Do It Now I Know It Is Ok To Do 👍🏼Thanks Man

Wow!😮

Thank soo much :)

Thanks Don! Great tip! I tried it here but [Draw Tool] didnt work in my specific case here. But I just range selected the click (with "Snap To Zero Crossing" enabled) and deleted it! Perfectly!

I use the RX declick and what I do is that I automate the mix so that it only acts on the clicks, thus leaving the rest intact, then I render and continue with the rest to eliminate the RX and that latency

by the title I knew it was going to be the drawing tool in Cubase 👍 I remembered your other video and I use it a lot instead of automation for nuisances. Now, I will for this too (along with surgical Spectralayers)

OMG!🤩

Nice

You are a wonderful person. Please explain to us the inputs for a compressor in Qubis, the mono and stereo inputs and outputs to connect to a compressor or any other hardware.

Wow, I've been using Cubase for over a decade and had no idea you could do this. Thank you!

@RedButtonTV1

11 күн бұрын

wavelab has that since always

Thanks Dom, I never knew about this, but will it work ok without the “BOOM!” 😊

Clicks/gaps are less common than in the early days of audio interfaces and PCI cards. I remember myself doing that a lot, i.e. after tranfer Adat 8 channel through the audio card inside my comp.

Hey Dom, thanks as always! I had a different audio "click" issue and traced it back to needing to adjust the latency and buffer in the audio settings. It drove me nuts but only had the problem with a few projects in the past. I could use more insights in understanding this... or maybe it's an excuse to get a new computer?!🤷

Sometimes the clicks appear as a result of tongue movement or saliva or any other mouth-related thing involved or adjacent to sound emission. Also, most times they don't look like spikes in your waveform, but rather like jagged lines. Sometimes it's easy to spot them, other times not. I use the pencil for that too to draw a more seamless line instead of the jagged one. I wish the faulty, clicky part were more obvious.

I use Adobe Audition and would love to have a feature like this :,) One note though, using a click remover plugin removes ALL clicks with one button. That alone is irreplaceable for me, especially dealing with artists with home studio setup, who usually have a lot of imperfections in their audio files.

Studio ine also cak do that bro ❤❤

..on logic pro latest is non destructive too..u can undo, regards Dom and thanks for your amazing tutorials.

I wonder as an average user if it’s actually possible to know all the little features of Cubase? Now I know one more!! Thanks Dom…👍

your shirt color changes :)))

What is this sorcery? Wow!! First time hearing this!!!

❤

Thats why i buy wavelab and tell ableton to make it the default wave editor. Intel and nvidia have a lot to answer for when it comes to high page file usage, high dPC latency. Intel dynamic tuning driver is terrible when it comes across audio DAWs it goes nuts and causes audio clicks. Nvidia interrupts are terrible too especially if gpu switching between on board gpu and nvidia gpu. OEM bloatware and e cores are also a problem for audio.

Only a master knows 😄 Thank you, I couldn't understand what you whispered? I like your video editor changing your t-shirt color 👍

@DomSigalas

13 күн бұрын

I said, Cubase is great isn’t it? 😉

@shapourdashtpour63

13 күн бұрын

@@DomSigalas it's great as long as you make it simple 😁. Thank you

Cool trick :) Does this also work for mouth clicks/noises?

THANK YOU for showing how to do this without using expensive Plugins. I watched a Video about getting rid of Fret Noise, where the Guy literally said, "Open RX 10, and press the "Remove Noise Button".....like, yea,, that's great, now show how to do it without using a $2,000 tool that not everybody can afford...

Good tip, thank you, and how did your t shirt change color? I want a OBS filter that makes disco light in the room?

Hi, best Cubase tutorials in the world! I even understand your English... I´m from Germany ... 😁 Is there actually a trick that allows you to do this de-clicking AFTER editing with Vari-Audio?

Thank you so much Dom very interesting However, I have a request. Today the AI music is a reality but the quality of sound need more work and so would be great if you can do a video on how to use Spectre Layer and Vari audio in order to arrange sounds what come out from AI. E.g. Convert the parts from audio to midi Thanks in advance

As God as my witness… I’ve been doing since this Nuendo 3. Same DAW just for movies.

Excellent tip. Used it for a years. Only problem I have is that my mouse hand is not steady through physical health problems, and never seem to manage it clean 100%.

@DomSigalas

12 күн бұрын

That’s why I use a trackball :)

Also possible in Studio One with Paint tool in combination with clip gain envelopes.

@DomSigalas

13 күн бұрын

I see there's a lot of requests about this in Studio One and it hasn't been addressed. To my understanding it's not possible the way I show on the video- do you have a video to show us how it works? :)

OK, I give, what did you whisper at the end?? 😁 Was it "Cubase is awesome, isn't it"?

You can import the audio file into sound forge and do the same editing with the pencil tool.

@robingraham1585

9 күн бұрын

That's what I used to do. I didn't realize it could be done inside Cubase.

Very easy to do in Digital Performer (which is surely very better than Cubase for audio editing…)

My VOICE is ALL clicks!

Dom aka "The Cubase Don"

Cubase Is making your T Shirt change from blue to green

Dom thank you for another amazing video !!!! I have one question hoping someone can help me when i export my one track beat to record in cubase from FL Studio my beat is not on the grid but the tempo and sample rate is the same any advice how i can fix this insted of manually sniping it :=))

Does this work in Studio One as well?

damn, i would think that reaper would have this 😭

hi dear Dom how did you make the Sample Editor so big on the Window so you can see the waves/sample like a points and ready to draw on it? I tried many ways withaout succeed :( Pls help!

I use soundforge to record vinyl and restore it from destroyd clicks or scratch or Clickrepair to repair low clicks. It's not new. I do it almost 20 years.

your shirts changing colo(u)r again lmao

Studio One can do it too.

I’ve a question for Cubase , trying to reverse a track doesn’t work and in the process window it just shows an exclamation mark next to the function I just tried … any advice ?

HELLO SIR

Is there way to do this reaper?

P.S: ... it´s only possible with a real audio editor. 🔥 S1 and Reaper don´t have this. ^^ 😘

logic has destructive and nondestructive editing too. it s better than cubase in most of the cases

Whats going on with that tshirt?

Hey Boss👋 am facing many challenges in cubase 13,1 is that I don't get the pitch sound to listen when In variaudio when pitching up or down,2 is that I don't know how to set may cubase to start in the point I stopped last because mine keeps jumping back and front on time line, that's bomboglad,can you do something on that plz 🤔🙏

Audacity has this as well.

What is the original color of your shirt?

What did U whispering in the end😅😊

I always assumed that any other DAW can do that.

@DomSigalas

13 күн бұрын

Me too!