Found this video after dishwasher quit drying and sanitizing. Your video is concise and easy to follow. Ordered part, followed your instructions, and it worked perfectly. Total repair time was less than 20 minutes. Thank you so much.

Bought a renovated home and thought I had to buy a new dishwasher as well. It smelled awful and did not heat dry. I did some research and found your video. Thanks for explaining every step and the closeup shots. I did the repair myself and I feel so proud! I am not a “Do-It-Yourself-er”. You saved me hundreds of dollars from having to buy a new dishwasher! Thanks for your generosity. Thanks for taking the time to create this video. Literally a life changer.

I am 67 years old and thanks to watching your video I gained the confidence I needed to repair my dishwasher. Knowing the tools I would need was very helpful and having a magnetic screwdriver with hex adapter was great advice. The close-up shots of each step along the way made it very helpful and easy to follow.

All 'fix it yourself' videos should be done this way. Thank you very much.

O M G this freaking worked. I can NOT believe it . I am dancing around my house. All the search info went to a bad heating element. There was nothing during my first few searches that discussed this little secret. But after searching for like the 7th time, i found this. Thank you Thank YOU. Bought the part on Amazon- got the one listed prime that was cheaper than all the others and it was an ACTUAL GE PART. Thank goodness for the magnetic hex wrench and i taped that little side hole. I did let the plug thingie slip thru the hole by accident and after cursing alot i got out the spackle gun and used the long L bracket on it to find the piece and pull it back up. I then taped it to the hole until i was ready to put the new part in. I also taped the side hole so i wouldn't lose the screws. What an empowering feeling. Truly thank you.

@lostmagicofdisney

10 ай бұрын

I love your enthusiasm. 😆 I feel the same every time I'm able to make a repair without needing to call a repairman!

Best visible instructions I’ve seen yet. Thank you. [Seattle WA]

This repair fixed the issues with the water in my GE dishwasher not heating the water. Thank you. Part number needed is Part # WD21X10519. Great repair video quality and instructions. Thank you.

Great video. Daughter (10) meticulously followed steps and succeeded thanks to your video!

Followed your instructions. Dishwasher working, using hot water to clean and dry the dishes. Thanks for saving me $100’s. Bless your soul.

Thank you for your knowledge and generosity! You saved me hundreds of dollars instead I spent $70 total- $40 for the part, $20 for expedited shipping, & $10 for a hexhead screwdriver

Wow, one of three choices to why I’m not getting water in the dishwasher. And this was the easiest of the three to try first and darn sure it worked.! Thank you for your in-depth installation instructions.

I replaced the Float. Thanks for the help. It works perfect now. Float was full of MOLD, so the switch was stuck.

I just fixed my dishwasher I am so excited!!! Thank you so much 😊

Thank you for posting this very helpful video!😀

This video was great. Very easy to buy the parts, tools and then install. I had this fixed within 10 minutes.

Thank you for this video! Our dishwasher was not heating and had a funky smell. I ordered the part from Amazon for $37 and it took me 10 minutes to swap it out. The Dishwasher is working like new now.

Great video. I replaced my switch and now have steam again when I open the dishwasher. My switch appears to have been stuck due to not cleaning the filter. I encourage everyone to clean the filter regularly.

Thanks so much for your informational video! I really appreciate your pleasant, well-modulated voice and the close, brightly lit views. Very professional - I can't wait to tackle the job!

@partselect

2 жыл бұрын

Thanks for the kind words and for visiting our channel!

Thank you Steve!

Most helpful video I’ve seen for this repair.

Thank you, thank you, thank you.....worked perfectly...$20 part and dishwasher seems brand new!!~

Great video thank you for the easy to follow instructions

Thank you fixed mine today

Thank you so much. Only video I could find on this part. Didn’t see the little screws, about broke my float

Awesome video thank you for making it.

Perfect! Thanks a lot!

Well done Sir👍🏻

How can you diagnose if this part is bad or not?

@seymoreazz

2 жыл бұрын

With mine, the dishes weren't completely dry, and didn't come out hot. No steam would come out of the dish washer

@Sparkchaser1200

11 ай бұрын

Good ones rattle, ball float inside must be free to float, bad ones don’t. Replacing this part fixed mine too.

Hello, thank you for taking the time to make these videos, do you know if there is a way that I can test the part to know that it’s faulty?? Can this be done by testing the pins with an ohm meter. I don’t know which wires to test, the harness for this part that has one orange wire, one red wire, one blue wire, and one white wire… I’m going to go ahead and replace it, I’m a technician for an apartment community and I would like to test Parts to prove their bad if I can , thank you for any advice or help with this, thanks again I really enjoy all of your videos, and I learned a lot from them

This worked although getting those screws off were a massive pain I almost gave up …

Just curious, and this is a serious question: what should you do if that harness goes back down into the hole? What would I need to disassemble next? I am about to do this right now, so I thought I would pose the question for possibly myself and others. Also-THANK YOU for the info about the 1/4 inch extender.

@21AirDrop

Жыл бұрын

You can reach underneath and push it back through.

We opened up the area as shown in the video and there is no flood switch. Do newer dishwashers not have them?

Hello. Don't really expect a reply but it is worth a shot. If the float is bad, will it cut power to the user interface? I have good power to the lower board (green LED is flashing fast) and I have 13.8V at the pins going to the upper door control panel but I have no power on that upper panel at all. I've tried all resets known to man. Trying to avoid buying panels I don't need if the float switch could be the issue. thanks

Thank you for the video. I switch out the flood switch, but now it won't drain at all. Please advise.

@Susan70003

Жыл бұрын

Did you try turning your circuit breaker off for a few minutes and then turning it back on? Did you find the reason for not draining?

I started the repair but when I got to 2:00 found this whole sump area full of water. That's not right, is it? What does that mean?

What can I do if the wire falls down the hole? I went fishing around for it but I cant seem to find it.

Mine works, but is leaking. I reinstalled seemed tight. Any advice???

My new flood switch rattles as if something is loose inside, is that normal?

@Dinocrus500

2 жыл бұрын

Yes, that's what it is supposed to do.

how did you get the water out of there?

@spartacus5380

2 жыл бұрын

I think water isn't supposed to be in there (it is supposed to drain out), but if things are clogged, you can use a rag to soak up the water and squeeze it out into a bowl.

The fine filter cap in my dishwasher broke off. 😡 Edit to add.. after forcefully unscrewing my filter it looked like it was covered in concrete. We have hard water.. 7 years of never cleaning it out🤢 I didn't know!

@Susan70003

Жыл бұрын

Glisten dishwasher cleaner.

Slightly different model - checked the switch - not at all the same wondering if the Thermal switch is bad - I don't see any videos on that subject ...