GARMIN Software Update Using The Active Captain App.
USED Inventory here:
www.russellmarineproducts.com...
Check our NEW INVENTORY:
Garmin Products:
www.russellmarineproducts.com...
Lowrance Products:
www.russellmarineproducts.com...
Humminbird Products:
www.russellmarineproducts.com...
Minnkota Products:
www.russellmarineproducts.com...
Don't forget about our Trade-in/Trade-up program, and our hassle-free financing options through Affirm Financing.
Calls us at 316.313.4113
Email: Sales@Russellmarineproducts.com
Пікірлер: 168
It’s been a year and I haven’t attempted to update my Garmin....UNTIL NOW!! Thank you for the easy to follow instructions.
By far., the most informative channel on youtube!
Thank you for this great instructional video it made my sv122 setup very easy. With a good high speed internet connection I did this in under 30 minutes. Straight to the point and step by step.
Fantastic instructions. It would have taken me a whole day to figure all this out. Thank you
I just purchased a 106sv and as a new user to Active Captain the steps were a little different for a new user, but the screen prompts and your tips guided me through the process. Thanks
Thank you very much for this video it made setting up the active captain and performing the updates needed easy to understand for our 94sv.
Thanks for your help. I have a diff Garmin unit but your info still helped even when Garmin's customer service is/was useless
This is FANTASTIC!!!! Thank you for another needed how-to video. I hope you get your cookies!!!
Thank you. Looks like you have a really nice shop and I’ll bet you treat your customers well.
Great video and thank you so much for it. I am old an computer stupid and these are my first graphs. I got it updated and it was "clear enough" because of this video that I could do it. Thanks again
Super helpful! Thanks for putting this together. Updated my unit tonight!
This was great! Now I can update my 2 units! I'm sorta computer and phone savy, but reading these steps seemed difficult. Thanks for making it look easy.
@pwea1anda294
Жыл бұрын
he just said do the one and the second one follows automatically ... uhhh
Great video. Very informative! Have been holding off on updates but you gave me confidence to try it!
Thanx for sharing the info! I just set up both of my Wave Runners, one with ECHOMap UHD 73CV and the other ECHOMap UHD 73SV. Off to the back country now!
Finally able to upgrade software on garmin with your great and easy to follow video
Thanks for making my update a breeze. Great info video!
Thanks much needed, just installed livescope last night!
Thanks for the video, very helpful one year later for a refresher.
I just watch the video and I updated my Garmin. I appreciate your videos thank you!
@RussellMarineProductsLLC
6 ай бұрын
I'm glad we could help!
This video is extremely informative and I’m a moron,it took 2 hrs of pushing buttons on different screens and I got it. Got her done in the parking lot of Campground:)))
Always reliable information!
I've never updated mine yet. My unit is working superbly
Thanks for this video. I was winging it based on garmin video and it was taking hours. The part they don't mention is to switch from the garmin wireless back to your home/local wifi. Once I did that, it downloaded in seconds.
Thanks for the video. I updated my Garmin 942 and I'm sure it would have been nerve-racking had I not known how long it would take as my screen went blank and when it was updating the brightness was so low I could barely see it in bright sun. Everything came back up and worked well.
@jamesmnoblesjr9062
2 жыл бұрын
Stuck on software updates page, just like hundreds of other fisherman:((((((
Thank you! Most helpful video yet!
Thank you for these instructions.
This video was VERY helpful. Thank you very much!
Very well done. Thank you!
A BIG THANK You Josh and the cookies are on the way I'll be home the day before Thanksgiving and they should be on the way soon after
Thanks for this video. Very easy to follow.
Excellent video, it just help me update my 73sv. Thank you
Awesome straight forward vid, thanks 👍🏻
Very helpful video, and a real good looking guy! Thank you.
Great explanation. I had kind of muddled my way through and got it working but it would have been easier to have seen this video first.
Great video guys!!! Thanks so much👍🏼💯🎣⚓🧭🚤🍻
Thanks so much! Great video
Great video. Thanks for your help!
Thanks for your help!
Excellent!!!!
Great job Josh
Sounds like a 6 pack job,but I'll have crack when it turns up,Cheers for the great Video👍
I updated mine. Little tip for y’all. If you have IPhone, go into your settings……. Go to notifications….. select messages and turn off notifications…. Go back to phone notifications and turn them off also. That should take care of anyone calling or texting during the update
Thank you for this
Thank you!
Thanks for sharing
Great tutorial, thanks! My unit is flush mounted so I need to take it out to access the memory card in the back. Question? Can we just leave the card in for the next update or does it need to be removed each time? Tx
Great job josh!
Great video, thanks for sharing
Great video!!
Great information, Thanks
Hello thank you for the Video. Once everything is complete, do you leave the micro card installed in the unit or can you take it out for later usage?
great video. Thank you
Thank you will be doing this today
Great video
I am going to attempt this tomorrow on my new 126SV. Do you leave the SD card in the unit when you are done ? Great video !! Thanks
thank you verry usefull information
Thank you so very much. I was able to update my Garmin unit. One quick dump question... i don't have to leave the chip in the unit as the update is stored on the unit's harddrive now correct? Thanks again. I really appreciate it.
If i have 2 7601's and 2 8610's along with Livescope, am I still OK with a single update with different models? GREAT Video... Thank you!
Do you think Garmin will ever have a update that allows the 93sv uhd echo map to be able to use the helm feature in active captain
Great video thanks
@RussellMarineProductsLLC
10 ай бұрын
Glad you enjoyed it
Thanks I just updated my ECHOMAP Ultra 106sv to v14.10 and I think my Panoptix Livescope system is now on v2.53. Is there anyway to confirm that? I see 14.10 on the software settings screen. Just not sure where to go to confirm the Panoptix software version?
Great info. thanks , my question is if you have 2 units or more do you have to have both of them on or powered up.Thanks
@whenboysetsfire1
3 жыл бұрын
You do then one at a time
Thank u
Do you have to leave the micro SD card in the unit after updating? And I know you said it’ll update all other units connected in the network…. Does that include the GLS 10 black box? Thanks!
Hi I already have a 32gb in use in my echomap plus do I need to format the card
Just an update to this! I just installed the software update on my new 94sv UHD, and it did not go as simple as his! 4 hours, 3 SD cards later I finally get it installed! Mine moved much slower than his, so as he said be patient. Each time mine got to 100% validation on the update, my unit would pause. I checked all the suggested items on screen, hence 3 SD cards, however I decided to try my iPad as opposed to the IPhone 8 Plus I was using. The update installed correctly that time! So just for anyone in the future if it pauses try a different device to download from. Hope this saves someone like me from going crazy in the future! JMO.
@lching7491
Жыл бұрын
I’m having problems with my install also. I’ll try an iPad next. Maybe it’s the cellular connection. I’ll try again with my iPhone on airplane mode
@melloreel
Жыл бұрын
@@lching7491 Try to get on wifi somewhere! It moves a lot of data and not sure cellular will work? Good luck and be patient.
In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzread.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.
Thank you for the info. With the multiple units on board, does that mean only garmin units or can it be garmin and 2 lowrances or vice versa?
@Erklzanderz
2 жыл бұрын
Different brands will require different software, so I dont think you can eve. link them, let alone update them together.
Sorry for the stupid question- do I have to use a new micro as card to create an active captain card each time I update ? If no is it ok to just click to reformat the current card ? If yes what do I do with the old active captain card?
Just purchased a Livescope 34 with a 1022 chart plotter. What do you recommend for garmins best detailed map program. Do I use active captain or is it like humminbird where you just insert the lakemaster unit. Is it possible to transfer my humminbird waypoints to my 1022? Thanks!
Man thank UUU
So that's updaters my Garmin with updates. If I have the vessel view mobile on motor and app, will my phone stay synced with Garmin 94sv and I can just use the engine icon on the Garmin to look at RPM's, GPM, hours on motor, etc?
Do I need various cards cause I was cause use the same card to have the updates, routes and activecaptain. Or does it require separate cards for different assignments
Late to the party here but, does the SG card have to stay in for the update to remain or after the process do you pull it back out?
They say you can so it with your computer so do I get a really long Ethernet cable or take the unit into the house OR buy a new laptop? I have wanted one. Mmm
loved the video..Was always the trick.....What wifi to use DAAAAAAA
If u have multiple units doing the software update with ActiveCaptain , does all units have to be turned on ?
I just purchased the garmin striker plus 7 cv and garmin strike plus 4 my 4 is at the console because it was to replace the small lowrance and 7 is at the bow if I update the 4 will it automatically update the 7 ant the bow??
What if the garmin was previously owned and had updates previously done. Has a card in it. Do I still need a new card. Tried to do a update but said something about a guest can't make changes?????
I'd like to update the Garmin 8612's in my center console. I noticed the main unit already has a memory card in one of the 2 sd card slots on the back of it. I'm guessing this is perhaps my Navionics cartography chip. Do I ignore it & follow these steps, using the empty SD card slot next to it, or should I take a different approach? Thanks in advance for any helpful replies.👍
Can you add perspective mode this way? Using active captain?
Thank you so much for this great video! It helped us so much.
Do you have to leave the memory card in at all times once this process is finished?
You say you can update Garmin units on ethernet network but can you also update items on NMEA network?
Hey there. I just got another 1243xsv to pair with a 943. Is it possible to share custom combo views or do you have to make custom views for each unit?
Hello, Do one echomap download for all Garmin series? If so, can you use the same SD card for updating the 93sv then remove it and put it in the 106sv and download the same??
Would love some advice. My ActiveCaptain app on my phone says there are updates for my unit but when I try to transfer, nothing happens. Garmin Echomap says the unit is up to date and no updates available. I believe this is causing my Panoptix to no not power up. Help please!! Have you ever seen this before?
How much memory do you need on an iPhone to download the Garmin vision/Navionics maps?
Am I able to start with an empty memory card to update the software and then use that same memory card to download the blue chart maps to keep in the head unit at all times? If so could I then use that same card for updates in the future?
@Erklzanderz
2 жыл бұрын
No, because like you saw in the video, it will erase all data on the card (maps, old updates, etc) when writing the new software. So you would only want to use that card for current and future updates, and have a seperate card that you use for anything else like maps. Hope that helps
Can you advise on what to do if the transfer is interrupted? The Garmin has “Transfer Interrupted” warning but I can’t get it to start the sync again and finish. Pretty frustrating.
Do I have to have the phone app active captain running all the time while I’m using the Garmin unit on the boat?
Dose the Livescope needs to be turned on ?
Hi can you remove the memory card after the install or it has to be plugged in?
Hi, I bought Navionics Vision+ charts and downloaded it to the SD via G Exp. I inserted the card in the unit and turned it on but I’m not sure that’s reading the map. Anything I need to do? How do I check if it’s using the right map? It’s a 72sv with a pre loaded global map. Tks.
Bought navionics vision + but nothing seems to transfer when I connect to the Garmin unit wifi from my phone. Any ideas?
Geez i guess i missed it. I thought it was going to be plug and play just like my last 2 Echomaps. Duel Console limits me to a 74sv2 UHD. Well I cabled for and installed unit and fired it up. Well beat me with a broom handle, as soon i started programming it tells me i have to install Active Captain. That mean i have to run out and get the micro SD and adapter. Then download the (3.4 rated) application and hope it takes properly. Can I put my phone on silent mode to prevent any interuptions or is ignoring it enough. I just think on a $1149 bundle it would take much the throw in the mini SD. Tell me... Did i miss it or did they neglect to mention it. I dont see it mentioned in the instructions either. I'm pretty darn loyal to Garmin but it feels like I've been lied to by omission?
most important step: MAKE SURE PHONE DOESN'T GO TO SLEEP!!!
If I buy a new Garmin will it come updated or do I have to do that myself?
I tried to link my Garmin Force trolling motor to my GPSMAP 1242XSV and I can't get it to connect.
I lost my simulation mode when I updated my units. How do I keep the latest version and restore simulation mode?