Great helpful video!

Best Video clear I can understand and Thank you great video

Very helping vid..tq very much💖

I do listen very nice tool.you are good my friend

Chingon esto opino que es mejor q un aparato Lasser. En última instancia, el aparato no hace el trabajo, lo hace el mecánico.

Gostaria de saber onde comprar esse produto de alinhamento para caster com os pratos de alinhamento. Já enviei e-mail para a fábrica e não obtive resposta. Sou do Brazil. Se houver como comprar através de seus distribuidores eu agradeço. Obrigado.

Do I need to turn tables to utilize the gauge? I just need to get a general idea of what the camber is at with the aftermarket kit I have installed.

@TheToolconnection

4 жыл бұрын

No turntables necessary - watch the video, it is all explained.

can you make adjustments with the turntables ? , would you have to keep driving on/off the plates to adjust the toe, or just drive on and stop on the plate then adjust the toe ?

@mwv8408

4 жыл бұрын

NO! when car is on an alignment rack it stays parked on the steering plates once it sets up.

does that magnetic camber gauge work for aluminum wheels?

@TheToolconnection

7 жыл бұрын

If you want to keep the alloy wheel on, use this: gunson.co.uk/product/77137

Nice tools. I wonder how much do they cost as a set and individual

@adamwilliams4377

2 жыл бұрын

I bought mine off ebay for £9.50

Why not mount on rotor if u can?

I have a question, how much is maximum weight of vehicle what it can measured. thanks.

@TheToolconnection

7 жыл бұрын

1360kg per pair

Hi, I have just purchased the camber gauge & I am having a problem, i first mounted it on the wheel hub as you recommend & noted the reading, I then attached it to the brake disc (which is brand new) as mentioned in the tools instruction leaflet by going through one of the holes & I got a totally different reading, So my obvious question is which reading do I go for?. Oh & I hadn't raised the car at any point.

@TheToolconnection

9 жыл бұрын

For the readings to vary one of the faces must be out of true. A lump or bolt head sticking up on the hub face perhaps. The other possibility is that you have accidently adjusted the main level when moving the tool. The instructions also suggest the use of a flat bar to span the wheel rim to give a surface that is at the same angle as the camber.

@no1froggy

9 жыл бұрын

The Tool Connection Limited Thanks for your reply, The brake discs were brand new & fitted yesterday,After scratching my head a bit I think that the probable cause might be that the wheel/hub bearing cap although having a flat top is slightly out of true, So I opted for the disc method instead,,,,,,,,, Just one other question, I take it you take the measurement from the middle of the camber bubble?,,,cheers & a great tool by the way!.

@TheToolconnection

9 жыл бұрын

no1froggy Middle of the bubble, yes.

@raydesfor8217

8 жыл бұрын

+no1froggy stub axle is bent

@dimosk7389

8 жыл бұрын

+Ray Desfor but both the wheel and the disc are mounted on it. in fact the rim face is sitting right on the disc center, so i don't think it is possible.

And then what happens?

@itzbrskeemer

5 жыл бұрын

I’m saying ..... he never adjusted anything lol

I would like to know where to buy this alignment product to caster with alignment plates. I already sent an email to the factory and got no response. I'm from Brazil. If there is a way to buy through your distributors I would appreciate it. Thanks.

@TheToolconnection

2 жыл бұрын

if you visit the product page for G4008 on the Gunson website (www.gunson.co.uk/Product/G4008/Trakrite-Wheel-Alignment-Gauge) you can see a list of online sellers who you can buy this product through.

How much does it cost? I live in Thailand.

@TheToolconnection

7 жыл бұрын

We don't have any Gunson agents in the Thailand. However, this company will ship and have a very quick service: www.thetoolacademy.co.uk/

hola, buenas noches podrian hacer traduccion en español, o como contactar para adquirir equipo

@TheToolconnection

5 жыл бұрын

Fercar Europa,S.L. Pol.Ind. de Piadela 2 Sur Parcela 8-B 15319 Piadela - Betanzos Spain Tel: 0034902150202 www.fercareuropa.com

You don t need that if you have a flat cell phone ( ho has it not ) then with the app clinometer you can do it easy and more accurate !!! :)

Does Camber should always be zero?

@TheToolconnection

6 жыл бұрын

No. All vehicles have different suspension settings.

@Yons96

5 жыл бұрын

Vff

@reza_dc2

4 жыл бұрын

It depends if that is what you want.. I think most cars come with +1 camber or around that.. BMW X5's have a high rear positive camber from the factory.

Where to buy it?

@TheToolconnection

7 жыл бұрын

Whereabouts in the world are you?

what is set at for astra 06 rear camber ??

@TheToolconnection

2 жыл бұрын

Hi Mick, unfortunately we don't have any data for this vehicle. We have found a figure on Google, but we've not been able to corroborate it (which is why we're not sharing it here). If you are unsure about the camber/or alignment, it would be wise to get the car professionally checked out. Sorry we couldn't be of more assistance.

Where is the tool sold

@TheToolconnection

3 жыл бұрын

Find stockists here: www.lasertools.co.uk/

nouvelle technologie pour la visite technique des voiture ( extrem).................................

@jellyartsdirba3947

7 жыл бұрын

Khaled Trigui i