That was probably one of the best most clear and detailed video I’ve seen everyone else over complicates the instructions very nice job keep up the great videos 👍🏼

@MotorvateDIY

2 жыл бұрын

Thanks! I was a technical writer/trainer for 12 years so I strive for good and quick content. (which funny enough, sure takes a long time!)

@ArifulIslam-de5wl

2 жыл бұрын

@@MotorvateDIY Thank you again I’ve done everything step by step and it was a breeze it was my first time ever working on anything on the engine and I was very nervous but it felt rewarding

I cant believe I didn't discover your channel sooner! Thank you for saving me the time and money from the stealership! Appreciate your content

@MotorvateDIY

4 жыл бұрын

Hey Ryu Q, Thanks and I'm glad you found me :)

Watching you reconnect the hoses here helped me find the cause of my "system too lean" code. Thanks!

@MotorvateDIY

2 жыл бұрын

Well... that makes my day!!! When is the next 370z meet? I'd love to chat with you and test my gauges. Feel free to PM me on the370

Keep up the videos man, really appreciate how in depth they are.

@MotorvateDIY

6 жыл бұрын

Hey Zeta Orionis, Thanks! The next episode is in pre-production right now.

Thank you sir. I just bought a 370z so I will be following you every step of the way! Really enjoy how you make your videos. Straight to the point! Keep it up man

@MotorvateDIY

5 жыл бұрын

Hey Jay T, Thanks for your kind words! I am working on the next episode right now :)

Always appreciate your videos. Thank you for helping me today!

@MotorvateDIY

3 жыл бұрын

I love comments like this... Thank you!

Thanks for this. Just completed on 2014 Infiniti Q50 3.7HR - idle back to normal after throttle body cleaning.

@MotorvateDIY

3 жыл бұрын

Glad it helped

Great step by step demo!

@MotorvateDIY

5 жыл бұрын

Hey Nikhil Agarwal, Thanks! If your car is made by Nissan or Infiniti, you should follow these steps after cleaning: G37 & 370Z After Throttle Body Cleaning: Motorvate’s DIY Garage Ep.27 kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

This guy deserves more subscribers ..seriously..

@MotorvateDIY

Жыл бұрын

Thanks... The channel growth is OK, after all, not many people have the tools, space and knowledge to work on their own cars these days.

This is great! New to me 2013 EX37. Weird throttle response and stalling on warm startup yesterday. Will try this. Still learning

@MotorvateDIY

3 жыл бұрын

Excellent, a dirty throttle body can result in stalling on start up. I hope the video helped you resolve the issue.

Had a P0106 code, following the steps in this video helped cleared it alongside cleaning the MAF sensors. Thanks for the step-by-step!

@MotorvateDIY

5 жыл бұрын

Hey Ralu, I'm glad that you were able to fix the issue. The P0106 code means the intake manifold absolute pressure (MAP) sensor's output doesn't match the calculated pressure by the engine control unit. (ECU) This is used to verify the performance of the MAP sensor. Now with a very dirty throttle body, a P0106 is possible and cleaning the throttle bodies and MAFs should clear it. BUT it may come back: see this Infiniti TSB: www.infinitig37.com/TSB/ITB12-026a.pdf I assumed you cleared the code? In the future it is a good idea to use an inexpensive app like OBD Fusion and an ELM 327 OBD scanner and run a diagnostic report. Here is an example from my other KZread channel: kzread.info/dash/bejne/hmuDwdijo6WYetI.html If it does come back, please let me know.

@Rahulc1987

5 жыл бұрын

@@MotorvateDIY thanks a ton for the additional information!

@MotorvateDIY

5 жыл бұрын

Hey @@Rahulc1987, Anytime :)

Cool vid man!!..damn P0101 was getting me once every month or so. So cleaned maf sensor, but to no avail, code came back. So after work gonna give this a shot. Car's almost 5 yrs old now so needs it anyway. Thnx again

@MotorvateDIY

4 жыл бұрын

Hey stephen gillenwaters, A P0101 means the bank 1 (passenger side) MAF signal is not similar enough as bank 2. Check for any possible intake leaks on the passenger side and clamps are tight. If you have a cheap OBD scanner you can use OBD Fusion to display the actual reported air mass to the ECU. To learn more visit my other channel OBD4Everyone and watch this video: iOS OBD Fusion's Fantastic Diagnostic Report: OBD4Everyone Ep. 8 kzread.info/dash/bejne/l6uCrKaph6axlZc.html With the engine fully warmed up (idle around 650 RPM) the MAF air volume should be about 2.0 g/s. Good luck!

@stephengillenwaters1950

4 жыл бұрын

Well after cleaning both throttle bodies yesterday, noticed a big difference. Lots of carbon build up. thank you for the info, definitely going to replace the maf sensors as opposed to cleaning them again. Didn't think about checking for leaks but that is on the to-do list. Thnx again

@MotorvateDIY

4 жыл бұрын

Hey stephen gillenwaters, I know what you mean... The initial throttle response is so much quicker, it makes the car feel very responsive. Before you replace the MAF sensor, you should verify the sensor output. It would be an expensive mistake to buy a new MAF, put it in and realize, there was a loose or broken wire. Also, the scrap yard is a great place to get a cheap MAF and most offer a 10-30 day warranty. The G37 MAF (part number 22680-7S00A) is used on many different and easy to find Nissans: Nissan 350Z 2003, 2004, 2005, 2006, 2007 Nissan 370Z 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Nissan Altima 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Nissan Armada 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2017, 2018, 2019, 2020 Nissan Cube 2009, 2010, 2011, 2012, 2013, 2014 Nissan Frontier 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Nissan GT-R 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2017, 2018, 2019, 2020 Nissan Juke 2011, 2012, 2013, 2014, 2015, 2016, 2017 Nissan Maxima 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Nissan Murano 2003, 2004, 2005, 2006, 2007, 2010, 2011, 2012, 2013, 2014 Nissan NV1500 2016, 2017, 2018, 2020 Nissan NV200 2013, 2014, 2015, 2016, 2017, 2018, 2020 Nissan NV200 TAXI 2014, 2015, 2016, 2017, 2018 Nissan NV2500 2016, 2017, 2018, 2020 Nissan NV3500 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2020 Nissan Pathfinder 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Nissan Quest 2004, 2006, 2007, 2008, 2011, 2012, 2013 Nissan Rogue 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Nissan Sentra 2007, 2008, 2009, 2010, 2011 Nissan Titan 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Nissan Versa 2006, 2007, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016, 2017 Nissan Versa Note 2013, 2014, 2015, 2016, 2017, 2018 Nissan Xterra 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

Thorough video! Awesome!

@MotorvateDIY

4 жыл бұрын

Hey Jason LeBlanc, Thanks for your kind words :)

Thank you for the helpful vids, subscribed

@MotorvateDIY

4 жыл бұрын

Hey Private Shak, I'm glad you found the videos helpful and even more glad you subscribed! Thanks :)

if your 7at shifts hard from 3 to 4, try this. mine were full of gunk on the bottom and now the shift is smoother and response is better

@MotorvateDIY

3 жыл бұрын

Hey... Thanks for this info!

Made it easy! And can tell a difference 🙏

@MotorvateDIY

Жыл бұрын

Good to hear! You should feel a little sharper initial throttle response and the cruise control speed up/down should operate a little smoother.

Thanx for this Cleaned it today was quite dirty

@MotorvateDIY

Жыл бұрын

Most welcome 😊

Wow, great videos and major thanks! Do you have videos to clean the maf?

@MotorvateDIY

3 жыл бұрын

Hey TP, Yes I do.... shot but not editied. I should have that out soon.

Thanks for the vid, I plan to replace my spark plugs on 13' G37x Sedan as it just hits 100k miles mark. While I am going to change the spark plugs anyways, I think I will clean the TB and MAF as well. Do you think I should disconnect the battery first to clean the TB and MAF? I am sure after cleaning I will do all three learning procedures in your other vid.

@MotorvateDIY

4 жыл бұрын

Hey Andy T, You have great timing. Yesterday I cleaned the MAF, throttle body and replaced the plugs AND used 3 cameras to shoot it for a future episode. There is no need to disconnect the battery. I didn't yesterday and the car fired up and idled well. However, if you think you need to disconnect the battery, there is no harm in doing that.

@atcyber

4 жыл бұрын

Motorvate DIY That’s awesome. I’m looking forward to see your next video.

There's a good change that your MAP sensor will throw a code: P0106 after this procedure. If so then you will also need to use the following TSB and ECM relearn reset reprogram procedure: EC12-010a ITB12-026a May 23, 2012 which has been updated recently too. You may need the consult III computer and software to do this.

@MotorvateDIY

Жыл бұрын

Nope... That TSB updates the ECU to fix a bug. There is no connection to a P0106 and cleaning the throttle bodies.

If you moved the plates incide of the throttle body you need to reprogram ECU. I learned it hard way on my wife's mazda. Removing entire throttle body, cleaning it, and not moving plates will do just fine, no reprogramming needed.

@mitchellmeyers1705

4 жыл бұрын

What happens if you don’t reprogram?

@MotorvateDIY

4 жыл бұрын

@@mitchellmeyers1705 In the example of a Nissan or Infiniti your idle will be unstable and high.

@Eurodriver801

4 жыл бұрын

Eugene Tooms what plates? I haven’t done this before and don’t wanna make a mistake was it the one he moved in the video to scrub with the tooth brush?

@se5145

4 жыл бұрын

@@Eurodriver801 Yes, that is the throttle body plate. Whenever you clean it you need to do an idle relearn

@dexate

2 жыл бұрын

How do you reprogram? Or can you just do as this video without moving thr plates?

I don’t have an 8mm nut driver. Seems like you could use a flathead screwdriver to loosen those clamps as well. Correct? Looks like it has the groove for it.

@MotorvateDIY

3 жыл бұрын

Yup! :)

Hi , i have a 2009 370z AT , before cleaning my throttle bodies , do i need to disconnect the battery or can i leave it connect ? after cleaning , i must do the "relearn" procedure for throttle and idle ? thanks for your answer.

@MotorvateDIY

5 жыл бұрын

Hey Flo, There is a lot of confusion and mis-information on the internet about cleaning the throttle bodies. There is no need to disconnect the battery. Follow the steps in the video to clean it and then do the three steps as shown in the "After Throttle Body Cleaning" kzread.info/dash/bejne/en2dw6hphsS6nLQ.html Here is why you need to do the three steps: After the throttle body is cleaned, you have removed carbon build up and this changes the airflow through the throttle body. So, we need to "teach" the ECU the airflow of the cleaned throttle body. Good luck!

Looks like the butterfly valve itself is modular and can be removed with two screws. Is this a correct assumption? And also is any loctite involved in putting them back on? Have a 12 G37xS with 150 000 on it and it runs like new. Nothing but full synthetic oil changes has been done to the car since I bought it with 130000 on the odo.

@MotorvateDIY

4 жыл бұрын

Hey cardinaldriver, Yes... but each throttle body has 4 screws and can be removed easily. There is not loctite and many have reused the rubber o-ring with out any issues.

hey, is it okay to be super liberal with the throttle body cleaner? I'm talking about spraying while brushing. Will the engine be okay with getting that stuff in there?

@MotorvateDIY

5 жыл бұрын

Hey leinad20002, Yes, that should be fine. Remember to clean the EDGE of the throttle plate. After cleaning, make sure to do this: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html Also if you have a 2007 G35 or 370z with the VQ35HR, you might have difficulties doing the idle air volume learning. Good luck and have fun :)

Great video.. very detailed! Quick question.. Would it be ok to remove the throttle body completely so as to clean both sides thoroughly? I heard on another video that you do not want to unplug the control module on the throttle body because it will throw off the idle.. but would it go back to normal if we follow up with doing the 3 things you show on your "After Throttle Body Cleaning" video to update the ECU? I have a 2016 370z Nismo and will be using your videos to DIY my own vehicle.. so keep posting these great videos! Thx

@MotorvateDIY

5 жыл бұрын

Hey traec1992, The most important part to clean on the throttle body is the EDGE of the throttle plate. That is the part that regulates the air flow. Cleaning the front and back of the throttle plate is just for looks (and makes up happy!) So... I don't think there is any need to remove the throttle body to clean it. You can if you want. BUT after cleaning you should do the 3 steps in the "After Throttle Body Cleaning" kzread.info/dash/bejne/en2dw6hphsS6nLQ.html I'm glad you find the videos helpful! The next episode is in pre-production right now and there are many more episodes planned. Thanks for your comment.

@traec1992

5 жыл бұрын

@@MotorvateDIY Thanks for the quick response. Here's the update: I completely removed both throttle bodies and MAS. I used the correct CRC cleaner for each. Let them dry for about 30 min and reinstalled. Let me first mention that I have a few bolt on mods (Z1 CAI, Z1 HFC, AAM resonated short tails and UpRev Tune.. all installed by a professional shop out here in NC). At cold start the car idle at about 1500 rpm.. after about 20-25 sec it idle between 1100-1200 rpm.. after about a min or so it idle between 800-900 rpm.. it idled pretty steady at each interval. After a quick drive around the neighborhood (never reached more than 35 mph) the car idled at a steady 700 rpm. I also rev'd the engine to about 2500-3000 rpm a few times and felt no issues. Did I simply get lucky (not a chance.. lol) or did my UpRev tune override any issues I may have had with the ECU? Thanks again for the greats vids.. this was a lot easier then I thought it would be!

@MotorvateDIY

5 жыл бұрын

Hey traec1992, It is my understanding that UpRev or ECUTek don't change the idle control part of the code, so I don't think that had anything to do with it. If your throttle body is not very dirty, the ECU can adapt to the cleaning by itself. I think people get into trouble when they clean a throttle body for the first time at high mileage. If they don't do the 3 steps as shown in the "After throttle body cleaning" they will have idle issues. Anyways, it looks like all worked out well for you. It still wouldn't hurt for you to do the "After throttle body cleaning" kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

Thanks for this very informative video. I'm following the instructions right now and everything makes sense, but I am having a lot of difficulty unlocking the squeeze clamp. The two clips that you're supposed to squeeze with pliers are facing down and completely inaccessible. I also wasn't able to simply rotate the clamp as you did in the video, as it was extremely snug on the hose. Do you have any tips for this?

@MotorvateDIY

2 жыл бұрын

If the clamp hasn't been moved in a while (or never!) they can be difficult to rotate as they get stuck/attached to the rubber. You could try spraying a little silicon spray (won't hurt the rubber) on the clamp and try to move it again... other than that, my best advice is to keep trying. Being persistent is an important DIYer skill. Good luck!

@bohanyang23

2 жыл бұрын

@@MotorvateDIY Thanks again for your tips. I ended up buying a hose clamp plier which did the trick. Was able to get to the throttle body and clean it. I also followed the relearning procedures (accelerator released position, throttle valve closed position, and idle air). I just find it interesting that right after cleaning the throttle body and before I did the relearning procedure, while I did notice an initial (very slight) rough start, the RPMs were pretty much normal, both on accelerating and idle. After the relearning, again no noticeable difference in how the engine revs. So this kind of just makes me not confident that I cleaned the throttle body properly (even though it was definitely dirty and I cleaned the edges) or perhaps I didn't do the relearning properly (for instance when doing the throttle valve closed position relearn, I didn't hear the mechanical clicking sound). Just wondering if there's a surer way to know that this procedure was done satisfactorily? I'm not an expert on judging how the engine revs, but I assume if it revs to 2000-3000 in P, comes down to 650 without any stops or resurgence along the way, then that's normal?

@MotorvateDIY

2 жыл бұрын

Cleaning the throttle bodies and doing the idle air volume learning will give you a more stable idle, with no RPM drops/stumble below about 600 RPM. AND the initial throttle response should be a little quicker. If your idle is stable and around 650 RPM, then everything is good :)

I plan on changing my spark plugs soon. Since I’m going to remove the throttle body’s, should I take advantage and just clean both sides?

@MotorvateDIY

2 жыл бұрын

I would (and did!). If you Nissan/Infiniti has the 3.5 litre v6 and is a 2007, don't clean the throttle body. There is a bug in the ECU and it prevents the idle air volume procedure from running to completion and you are left with a high and unstable idle.

@rickdizzle5392

2 жыл бұрын

@@MotorvateDIY I have 2013 G37 so I should be fine. Definitely going to use your videos when I do the idle relearn 👌🏼

I have a 15 Infiniti q50 3.7 that’s showing a P1239 code. Sometimes I lose ALL power while driving at freeway speeds, but as soon as I restart it it’s back to running like normal. This has happened a handful of times and infrequently, and am wondering if cleaning the throttle body could resolve this problem

@MotorvateDIY

8 ай бұрын

I don't think it will. The P1239 code is defined as: "the throttle position sensor (bank 2) circuit range/ performance" This can be caused by a worn throttle body sensor, bad connection, broken wire or other items.

Thanks for sharing. Remove battery cable to do this job right?

@MotorvateDIY

Жыл бұрын

You can if you want, but I never have as there is no need.

I have a 2010 g37x, and im planning on doing this job this weekend. Do you have to worry about spraying into the throttle body if its still attached to the intake manifold? and when scrubbing, do you have to worry about the carbon buildup going inside of the intake manifold?

@MotorvateDIY

4 жыл бұрын

Hey Ryan Jermain, There is nothing to worry about when spraying cleaner into the throttle body as it won't damage anything. The carbon build up inside the intake has no impact on performance or emissions, so if you clean it, it will just make you feel better. :) The most important part to clean is the outer edge of the throttle plate and the inside bore of the throttle body. After cleaning, made sure to do the three steps in this video: After Throttle Body Cleaning: MotorvateDIY Ep27 kzread.info/dash/bejne/en2dw6hphsS6nLQ.html Good luck!

@ryanjermain4185

4 жыл бұрын

@@MotorvateDIY im blown away with how fast you replied, so thank you so much for that. Ill let u know how it goes

@MotorvateDIY

4 жыл бұрын

Hey Ryan Jermain, Thank you! I check and replay to messages once a day. If you take the time to ask a question, I should do my best to answer. PLUS, some of the questions are really interesting and gives me ideas for future episodes.

@ryanjermain4185

4 жыл бұрын

@@MotorvateDIY Just an update, did my throttle bodys and WOW they were dirty. Did all the relearns as you instructed and it all went smoothly. Thank u so much.

@MotorvateDIY

4 жыл бұрын

Hey Ryan Jermain, Thanks for the update! I'm always happy to my videos are helpful :)

I’ve seen other videos people saying not to open the throttle bodies manually if it’s an electronic throttle body. Is this true? Also dio you think taking the throttle body off to better clean the inside is necessary?

@MotorvateDIY

Жыл бұрын

Good questions! In the making of this video, I struggled to get a good camera angle and ended up cleaning /opening/closing the throttle body 5 or 6 times. It is OK to open the throttle body to clean it. I suspect that in the past after folks cleaned the throttle body, they didn't know to do the idle air volume learning and had idle problems. If you want to remove the throttle body to clean it, go right ahead. The most important part to clean is the EDGE of the throttle plate. This is the part the controls air flow. Cleaning off the carbon in other areas is only to make us feel good that it is clean. Sooooo, clean it any way you want, just make sure to do the idle air volume learning. :)

Guud sheeit my guy!!!! REALLY!!!

@MotorvateDIY

2 жыл бұрын

Thanks! I aim to please :)

Okay so I’m replacing the spark plugs on my 370 and want to go head and clean the throttle body’s since I’m taking them off anyways. after reading these comments I’m a little confused now. After cleaning it I need to do all the 3 steps in your other video right? Is there anything I shouldn’t do? Car is tuned and don’t want to mess up the idle. Thankyou

@MotorvateDIY

Жыл бұрын

It is best to do all three, but some have done just the idle air volume learning and all was good. You don't need to disconnect the battery and you can move the throttle plate while cleaning. Then do the three steps and all should be good!

I just clean the two throttle body of my 07 Infiniti g35 sedan,and I’m having a big problem.every time I start the car the rpm gauge is to high and after it gets to normal temperature rpm gauge goes up and down,any suggestions!!!what should I do?

@MotorvateDIY

5 жыл бұрын

Hey Henry Flores, I suspect you need to do the "After Throttle body cleaning" kzread.info/dash/bejne/en2dw6hphsS6nLQ.html This video shows you how to do the accelerator pedal released learning, closed throttle position learning and idle air volume learning. The video applies to all Nissan and Infiniti vehicles with an electronic throttle body. Good luck and please let me know how you make out.

@LeonardoRodriguez-fl6hn

4 жыл бұрын

Take it to get the CPU reset

Could you please make a video how to lubricate suspension for our G sedans without removing wheels? 🙏🏻

@MotorvateDIY

2 жыл бұрын

These isn't anything to lubricate. 30+ years ago most cars has grease fitting on the tie rod end and ball joints that made it easy to grease. The G/Z cars don't have any grease fittings and if there is a squeak, then you have a joint with dry grease and it needs to be replaced.

Since we are moving the butterfly in the throttle body do we have to disconnect the battery ?

@MotorvateDIY

10 ай бұрын

I never have, all I do is to make sure I move it slowly. In the making of this video, I ended up cleaning the throttle body about 5 times to get the right camera angles. No issues! Just make sure to do the "After Throttle Body Cleaning" (aka intake idle air volume learning)

Thank you!

@MotorvateDIY

2 жыл бұрын

I hope it helped :)

I've heard pushing the throttle valve by hand can screw up your idle, isn't that the case?

@MotorvateDIY

4 жыл бұрын

Hey Mikolaj, For a Nissan or Infiniti with electronic throttle (~2003+) pushing on the throttle plate to open it up does not screw up the idle. ** HOWEVER ** Cleaning the throttle body without doing an "idle air volume learning" will. As the dirt builds up on the throttle plate the air flow at idle changes and the ECU does a small adjustment to compensate. After cleaning, the required range of adjustment is too much and the ECU can't close the throttle enough to get a proper idle. The "idle air volume learning" process allows the ECU to learn the new air flow characteristics. Keep in mind, theses engine do not have a separate idle control circuit, only the throttle body - so it need learn the air flow when at idle. If you have a cheap Bluetooth OBD scanner and an Android device you can use this free app to do the idle air volume learning: Quick & Easy Idle Air Volume Learning: Motorvate's DIY Garage Ep.28 kzread.info/dash/bejne/gZ12m9axdaa9cpM.html Or do it the other way without any scan tools: G37 & 370Z After Throttle Body Cleaning: Motorvate’s DIY Garage Ep.27 kzread.info/dash/bejne/en2dw6hphsS6nLQ.html Thanks for the great question!

Did you clean the driver side one as well?

@MotorvateDIY

4 жыл бұрын

Hey Nathan Cabeceiras, I thought I mentioned that in the video, but maybe I didn't. Anyways, yes I did clean the other side :)

Boss, does the G37 have a idle air control valve?

@MotorvateDIY

3 жыл бұрын

Hey Atif Ashraf, Excellent question... and the answer is: NOPE! That is why after cleaning the throttle body, it is important to do the "idle air volume learning" as shown here: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html This procedure allows the engine control unit (ECU) to learn how much air the engine uses at the proper idle.

Any thoughts on using a catch can?

@MotorvateDIY

6 жыл бұрын

Hey chosenwon4444, Good question! It won't hurt anything and should help collect some of the oil vapour that comes from the PCV system, resulting in a cleaner throttle body. BUT, catch cans cost much more than the cost of cleaning your throttle body every 50,000 - 70,000 miles.

On the Nissan/infiniti factory service manuals every throttle body clean the ECM needs to me reprogramed, or else the idle with be out of parameters

@MotorvateDIY

5 жыл бұрын

Hey Rick Moises, I agree... that's why you need to do this after cleaning the throttle body on a Nissan/Infiniti: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

Did you have any idling issues? I’ve read on forums of people cleaning the throttle bodies and having idling issues

@MotorvateDIY

6 жыл бұрын

Hey Peter Chau, No idle issues, BUT I did the proper procedures after cleaning the throttle body: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html This process should work on every Nissan or Infiniti with a "drive by wire" or electronic throttle.

@peterkim2987

3 жыл бұрын

Motorvate DIY can this be applied to 07 g35ss?

What do you think about B12 Chemtool Throttle Body cleaner ??

@MotorvateDIY

2 жыл бұрын

I don't know anything about it, but if it is a throttle body cleaner, I'm sure it would work well :)

Hey do you disconnect the battery befor cleaning throttle bodys

@MotorvateDIY

Жыл бұрын

Many internet/forums say that you must.... but I never have. BUT I always do the "After Throttle Body Cleaning" steps aka "idle air volume learning: See my other video: G37 & 370Z After Throttle Body Cleaning: Motorvate’s DIY Garage Ep.27 kzread.info/dash/bejne/en2dw6hphsS6nLQ.html or if you have a cheap Bluetooth ELM327 and Android device: G37+370Z Easy Throttle Body Dirt Check using an App: Motorvate’s DIY Garage Ep.29 kzread.info/dash/bejne/gJ2qxaiOZrvQcbw.html

You can do it this way, but you might have a 50/50% chance you might have idle problems after your finished. And have to go through the idle and throttle re-learn process. I usually just unbolt the throttle body and clean it that way and barely move or touch the plates the throttle cleaner seems to get the gunk off pretty well by itself & the hard carbon deposits i just use a damp rag with cleaner.

@MotorvateDIY

5 жыл бұрын

Hey Eks ls, The most important part of the throttle body to clean is the EDGE of the plate. This is the part that controls the airflow into the engine. Due to the crank case ventilation system (PCV) feeding into the intake BEFORE the throttle bodies, a small amount of carbon will slowly build up on the small gap between the edge of the throttle plate and the throttle bore. Over time the ECU (engine control unit) will adjust slightly open the throttle body to compensate for the dirt build up. When you clean the throttle bodies, the dirt is removed from the small gap between the edge of the throttle plate and the bore of the throttle body. This creates a larger gap, allowing more air into the engine, which increases the idle. Sometimes if the idle it too high, the ECU tries to lower it, the revs drop too low, and then the ECU increases the revs. This causes the idle to rev up and down. So.... We have an ECU that knows the air flow of the idle when the throttle bodies were dirty BUT they are now clean and the air flow is different! The Solution: Three specific procedures need to be done, to teach the ECU the new airflow of the CLEAN throttle bodies: • Pedal Released Position Learning • Throttle Valve Closed Position Learning • Idle Air Volume Learning These are all shown in this video: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html TIP: If your throttle bodies are VERY dirty you may have trouble getting the Idle Air Volume Learning to run or complete. If that happens follow the steps in this TSB from Nissan/Infiniti: www.infinitig37.com/TSB/ITB11-060.pdf For the 2007 VQ35HR, an ECU update may be required for the Idle Air Volume Learning to run to completion.

@6402457

5 жыл бұрын

@@MotorvateDIY thanks for the info cause i fucked this up the first time I did this hahaha moved the the throttle plates and my idle got messed up when i started my vehichle it would rise to 3k then drop to 500 and go up and down like I had a vaccum leak. And doing all that relearn process was so tideous it took me like 9 tries to get my car idling normal again. But its idling & driving normal now and i just did a PCV valve delete to a catch can with a breather throttle bodies stay way cleaner now just your noramal outside dirt & grime no carbon deposits.

@MotorvateDIY

5 жыл бұрын

Hey Eks ls, Yes it can be difficult to get the idle air volume to run. However, if you have a bluetooth OBD scanner and a Android device you can use a free app NDSIII and do it with the push of a button: kzread.info/dash/bejne/gZ12m9axdaa9cpM.html I wonder what the long term effects are when a PCV delete is done... Instead of the blow-by gassed being constantly be sucked out of the crankcase, they are only "pushed out" under high engine load and vented to the atmosphere. Anyways, I'm glad you got your proper idle back :)

What should I do if the throttle body won’t open? Do I need the battery connected?

@MotorvateDIY

Жыл бұрын

With the car off, you should be able to gently push open the throttle as shown in the video. It does take a little force, just be smooth and gentle.

240K miles, 2012 370Z, seems to run fine. Never have done this. Maybe a little hesitation when taking off from a stop, but this can also be caused by a late release of the brake pedal. What should be noticed if this procedure is done?

@MotorvateDIY

10 ай бұрын

Two things: (1) smoother cruise control when changing speed. (2) A little more responsive throttle at initial "tip in" (when you first press the accelerator pedal.)

When do you have to replace the rubber gasket for Throttle body?

@MotorvateDIY

Жыл бұрын

From what I have seen they last a long time... so I guess they should be replaced when they allow air into the intake.

Did you need to do the idle re-learn process since you moved the butterfly valve? Did you disconnect the battery?

@MotorvateDIY

2 жыл бұрын

No need to disconnect battery and yes, I did the "idle air volume learning" as shown in the follow up video: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

@bobbyheenan4061

2 жыл бұрын

@@MotorvateDIY Ok, thanks. One quick question for you, if you happen to know, when replacing a crankshaft position sensor on a 2003 350Z, do I need to disconnect the battery? Thanks again!!

@MotorvateDIY

2 жыл бұрын

No need to disconnect the battery when replacing the CPS. Make sure to compare the old and new sensor length from the tip to the underside of the mounting tab. They should be the same, which means the flywheel to tooth gap is the same and in spec. Good luck!

@bobbyheenan4061

2 жыл бұрын

@@MotorvateDIY Thank you so much!!!

I have clean g37 throttle body with maf sensor cleaning jus fine

@MotorvateDIY

5 жыл бұрын

Hey Elvrick Gibbs, Great... It is nice when things work like you expect.

I’m in dire need of help car won’t throttle throws check engine light and p0106 code

@MotorvateDIY

6 ай бұрын

What year, make and model?

Have you or are you going to change the intakes?

@MotorvateDIY

5 жыл бұрын

Hey Joshua Cassino, Right now the intakes are stock, BUT when the budget allows I would like to dyno them to see what they can do over stock.

Hmmm interesting method! I can guarantee you know more about car maintenance than I do, so I'm not challenging you at all here. However, I've seen many other sources that remove the TB and clean on the opposite side of the butterfly valve (side closest to the engine) as well as the intake manifold in which the TB is connected to. Can you give me your reasoning as to why you chose to do it this way? Does it not make any difference? Thank you for your help.

@MotorvateDIY

6 жыл бұрын

Hey Tyler Hicks, That is an excellent question.... and here is why: The most important part of the throttle body is the small gap between the throttle plate and the outer throttle bore. This small gap allows for very fine air flow control. As the throttle body collects dirt, this small gap gets filled. The throttle body needs to open up a little more to compensate. BUT since it is open a little more, it does not have as much fine air control. (look at the second graph: blog.opticontrols.com/archives/727) If you don't open the throttle body to clean it, you really aren't cleaning the most important part. Carbon build up on the front and back of the throttle plate, or in the bore don't change the operation very much.

@joejones6968

6 жыл бұрын

Motorvate DIY Wrong. It most certainly does make a significant difference. To thoroughly cleaning both sides of the TB's and the plenum bore, itis very much ideal and very important. As well as cleaning the M.A.S as well. Very poor video, and not well thought out, this one gets a F.

@MotorvateDIY

6 жыл бұрын

Hey Joe Jones, The purpose of the throttle body is air regulation. Carbon on the back or front of the throttle plate or in the plastic plenum don't change how well it can control the air flow. Do we feel better with everything clean? Yes we do, but it really is not required. Is there any harm in cleaning everything? Nope.

@el34glo59

5 жыл бұрын

@@joejones6968 Bullshit. He's right and did it right. F my ass

@Waqar_a9

3 жыл бұрын

Motorvate DIY u told the way to clean but u should have also told it requires to be lean otherwise it won’t work properly

I am experiencing an idle issue where if the vehicle is stopped momentarily and in neutral (6mt) the idle rpm drops to about 400rpm and then surges back to normal. Do you think it’s dirty throttle bodies even though the car only has 70,000km?

@MotorvateDIY

5 жыл бұрын

Hey Dougie LaForce, It sounds like it... When dirt builds up in the throttle plate it can't make small adjustments to the air flow to keep the idle steady. Keep in mind, after cleaning the throttle body some vehicles need an extra step or two to "teach it" the new air flow of a clean throttle body. What car is this on?

@LaForce97

5 жыл бұрын

@@MotorvateDIY Vehicle is a 2008 Infiniti G37s. I followed the steps in all your videos yesterday and did the cleaning and learning procedures. Thank you very much for the information.

@MotorvateDIY

5 жыл бұрын

Hey Dougie LaForce, Anytime... Did you notice any difference?

@LaForce97

5 жыл бұрын

Motorvate DIY so far the issue hasn’t came back. I haven’t driven it in stop and go traffic (where the issue was most present) but so far I am pleased

@MotorvateDIY

5 жыл бұрын

Hey Dougie LaForce, That's all that matters :)

Sir, when I clean the throttle body on our G37s, is it better that I warm up the engine before removing the rubber parts (air intakes) at cold temperatures (-5 celsius degree) to make them flexible? Rubber air intake parts might be flexible and easier when I remove them?..

@MotorvateDIY

2 жыл бұрын

There is no harm in doing that, as it will make it easier to get them off. Be careful removing the smaller PCV plastic connectors, they always seem to be tough to get off. Good luck!

@Qkfltpdls777

2 жыл бұрын

@@MotorvateDIY Thank you for the reply! Is it totally safe to touch butterflies without disconnecting negative battery terminal even on 08 g35 sedans? (Yes i got ECU updated!)

@MotorvateDIY

2 жыл бұрын

I think it is ok. In the making of this video I moved the throttle plates many, many times without issue.

@Qkfltpdls777

2 жыл бұрын

@@MotorvateDIY i moved the butterflies while cleaning and had no issue AT ALL. This video helps and proves a lot. thank you sir. You saved my $ a lot instead of spending $ at shops for cleaning throttle bodies.

@MotorvateDIY

2 жыл бұрын

Glad to help!

Hello I have a 2008 Infiniti G35S 6mt (VQ35HR) and I have tried the process multiple times while ensuring all the steps and procedures are followed. I notice you said the VQ35HR engines have a bug with the ECU and doing the idle relearn. Should I try to contact the local Infiniti dealership to get it reprogrammed or just buy some use throttle bodies and install them?

@MotorvateDIY

8 ай бұрын

The ECU bug only applies to the 2007 models. It can be tricky to get the idle air volume learning to run to completion, as the timing needs to be VERY accurate and all the preconditions need to be met. One subscriber mentioned that it took him about 20 times before he got it to work. You can also use a free Android app and a Bluetooth OBD scanner: kzread.info/dash/bejne/gZ12m9axdaa9cpM.html

@muhammadnumaan7553

8 ай бұрын

@@MotorvateDIY Thank you so much sir, I went ahead and disconnected the battery overnight and reconnected it. Still idled at 800-900 rpm, however once I let it get warm enough I did 2-3 revs and the RPMs seemed to have drop to the 600-700 range

@MotorvateDIY

8 ай бұрын

Thanks for the happy update :)

Nice vid

@MotorvateDIY

5 жыл бұрын

Hey DoomFinger511, Thank you! It was difficult getting the proper camera angles as the throttle body is mounted very low. BUT after 4 tries I got it :)

@DoomFinger511

5 жыл бұрын

@@MotorvateDIY I just bought a 2012 g37xS with 49k miles last week. I subscribed to your channel. I know I'm going to need them at some point. Plan to use your advice and check the computer to see if I need a throttle body cleaning. Seriously your vid angles and explanations are great!

@MotorvateDIY

5 жыл бұрын

Hey DoomFinger511, Nice purchase! You might also enjoy my other channel: (has a slight G37 focus) OBD4Everyone kzread.info Thanks for subbing and your kind words :)

we have to disconnect the battery right?

@MotorvateDIY

6 жыл бұрын

Hey Debo Sen, Good question! The factory manual does not say to disconnect the battery, but it won't hurt anything if you do. I didn't when I cleaned my throttle bodies four times when shooting this video, and all was fine. JUST MAKE SURE TO FOLLOW THE "AFTER TB CLEAN" STEPS: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

Found it :-) 136K? That's pretty much exactly what I have on my 07 G35x. Will be doing mine soon

@story1234

5 жыл бұрын

How did it go? I am afraid to push the throttle body as per G35forum

@MotorvateDIY

4 жыл бұрын

Hey story1234, If you have a 2007 G35, don't clean the throttle body. There is a bug in the ECU that won't allow the idle air volume learning to complete. Some have been able to get the dealer to update the ECU and others have used Eugene at www.yelp.ca/biz/enthusiast-auto-care-concord to update the ECU.

What does cleaning your throttle body really do? I’m curious. Im starting to educate myself about cars

@MotorvateDIY

3 жыл бұрын

Hey Brown Saint, It allows very precise control of air flow. The throttle uses a "butterfly valve" and the ratio of position and flow is not linear. (1:1) As it starts to open, it has very fine control of the air flow. This is required as most cars in the last 10-15 years don't have a dedicated idle control valve. However, after opening 5-10% the change in air flow is quite large and that results in difficulty in accurately controlling the air flow. As the throttle body get dirty, the engine control unit (ECU) must slightly open up the throttle to get the same air flow. The more open the throttle is, the less precise control it has on the air flow and weird things starts to happen with the idle. That was an excellent question and I wish you luck on learning more about cars.

@brownsaint2324

3 жыл бұрын

Thank you so much @@MotorvateDIY that was very helpful🙏🏽

I followed steps here and did the relearn procedures after and now my g37 feels very sluggish. did a 0-60 test and took about 6.5 seconds. no cel. any ideas anybody?

@MotorvateDIY

Жыл бұрын

Did you do the idle air volume learning?

@Demotaiz

Жыл бұрын

@@MotorvateDIY yup I did all 3 procedures from the next episode. I think they worked bc right after I cleaned it it had a very high idle. Now it idles perfectly and has no problems revving up. Literally the only symptom it has is it feels sluggish (doesn't "pull" like before, feels like there is no low end torque). I noticed it right after cleaning the throttle bodies.

Sir, can you clean throttle body with brake part cleaner?

@MotorvateDIY

3 жыл бұрын

I don't know... I have always used TB cleaner. You could try it and see it it works.

All the module and sensors on the Nissans and Infiniti's including the 3.7 engine are very sensitive. How do you know if you didn't damage the coating on the throttle bodies?

@MotorvateDIY

Жыл бұрын

Every module in ANY car is sensitive to having the proper/required voltage. The micro-controllers don't function as expected at under-voltage conditions. As for the "coating" on the G37 throttle body, it doesn't have one and even if it did, a throttle body cleaner wouldn't damage it.

@xorbitman

Жыл бұрын

@@MotorvateDIY The 370 BTW doesn't have a MAP sensor although G37S coupes do. Probably the sedans do too. A lot of people with these cars think that by changing the airboxes to CAI they get better performance. That depends on 3 things: 1. The quality of the air filters; 2. The amount of actual air going in; and 3. The amount of cool air vs heat soak. If you don't get enough air you will end up chocking the engine, running to rich, getting poor gas mileage and your ECU will start throwing codes if it happens too often and that's when the SES light goes on in your dash.

@MotorvateDIY

Жыл бұрын

The 2010 - 2020 370 do have a MAP sensor, part number 22365-EY00C. The 2009 370 does not. The idea of "doesn't get enough air, and runs rich" is old school / carb thinking. The 370/G37 engines use a wide band air/fuel ratio sensor, and will adjust the fuel mixture to fit the actual air flow. Carbs couldn't do that, and would run rich.

I had to drain my tranny to fix a solenoid in my tcm unit I changed the fluid with Castro’s transmax full synthetic, I have 138,000 miles, 07 g35x sedan.. was that a good idea.. should I have not used that oil?? Any help would be very much appreciated

@MotorvateDIY

4 жыл бұрын

Hey Jonah urban, After a quick search for the specs of the Castrol fluid and then a quick search for the owner's manual... I think you will be fine. The G35 owner's manual specs a "NISSAN Matic J" fluid for the automatic transmission... and the Castrol Transmax data sheet says it is compatible with "Matic-D, Matic-J, Matic-K" To verify this, if the shifting feels the same you are good :)

@jonahurban4552

4 жыл бұрын

Motorvate DIY Motorvate DIY thanks!! Shifting feels better than before I changed the fluid!, not sure if u remember but I had wrote to you about my car idling bad and codes p0300 and p0021, it tuned out to be the VVT solenoid replaced it and I finally have my baby back!!

@jonahurban4552

4 жыл бұрын

Motorvate DIY wondering if you could tell me any maintenance I should preform for having just about 140,000miles I have done nothing with change oil, tranny fluid just now, and cleaning the throttle body and the air intakes as I have short ram intakes... thanks

@jonahurban4552

4 жыл бұрын

Sorry I’ve done nothing but the following maintenance ^

@MotorvateDIY

4 жыл бұрын

@@jonahurban4552 Good and thanks for the update :)

New sub thanks

@MotorvateDIY

5 жыл бұрын

Hey Freddy Villalba, Thank you for subbing! The next episode is under development where I compare different drop-in air filters and measure how efficient they are. (pressure drop across the air filter using an medical/industrial high resolution pressure sensor mounted in the air box)

Do u need to disconnect the battery

@MotorvateDIY

Жыл бұрын

No... With the ignition off, the ECU and throttle body do not have power. Some seem to think you must disconnect the battery not so you don't have high idle problems after cleaning... but that is not correct. After you clean the throttle body, you MUST do an "idle air volume learning" which sets the correct idle RPM.

should i disconnect negative battery

@MotorvateDIY

Жыл бұрын

You can if you want, but I don't.

Would you do this to spray Seafoam into the intake for cleaning? I can't figure out how to rev the engine and spray the spray during the daytime by myself so no one gets alarmed by the plumes of smoke that are supposed to come out.

@MotorvateDIY

4 жыл бұрын

Hey P Hanley, I have used Seafoam for over 30 years. It works really well for engines with carburettors - just pour a little in the carb and you are good to go. However, with fuel injected engines, I don' t think there is any benefit. Generally they run MUCH cleaner and have a lot less carbon build up. If your throttle body is dirty, it is best to clean it. (***Unless you have a 2007 G35 / 350Z then don't!!*** there is a software bug and your idle will be high and unstable) Seafoam alone won't do a very good job of cleaning the edges of the throttle plate. Also Seafoam can confuse the O2 sensors and set a code that you will need to clear. So get your toothbrush and get to work :)

@Xyrium

4 жыл бұрын

@@MotorvateDIY THanks for your reply. I was going to spray it in the G37 intakes. Should I just spray into one side of the intake on the VQ37 or remove the boot from each side and go half and half? Last, how does one rev the engine while in the engine bay?

@MotorvateDIY

4 жыл бұрын

Hey P Hanley, On the G37 there is no easy way to add Seafoam to the intake system. Some use the brake booster, but then the seafoam doesn't pass through the throttle bodies. In my opinion, don't use seafoam at all. Clean the throttle body (kzread.info/dash/bejne/q4d_m5uPkrbPhKg.html) then do theses three steps: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html Also, there is no way to rev the engine under the hood. The throttle bodies are electronic and there is no cable to pull on , like what we did in the past.

Does it makes power ?

@MotorvateDIY

3 жыл бұрын

Hey SillyChillie, Nope, but it does give you much better throttle response :)

No throttle body cleaner? I thought you weren’t supposed to force open the throttle body if it was electronic. Or is this not electronic?

@MotorvateDIY

6 жыл бұрын

Hey boostedmaniac, The throttle body cleaner was sprayed off camera onto the tooth brush. I didn't want any throttle body cleaner droplets eating my lens. - I will try to add a note about that. Thanks for pointing that out. That may be true for some engines, but it isn't true on this one. (VQ37VHR)

@tofuyam7361

5 жыл бұрын

@@MotorvateDIY I thought I read on the myg37 forum that some people were causing damage after forcing the throttle body open.

@infiniti_chik1225

5 жыл бұрын

@@tofuyam7361 I have a 2005 Infiniti FX35 with an electronic throttle body. I've completely taken my throttle box off to clean it, not once, but twice with absolutely no damage and no issues. I opened the throttle plate and cleaned 'the heck out of it' (And, I am a female, by the way)....thank you Now, tell that to the people in the forum :)

Hey what up man I have a cel code for P0420 bank1 and have a small rough idle any idea what it could be ? You’re videos are amazing btw !

@MotorvateDIY

2 жыл бұрын

If you want to troubleshoot this yourself, you will need an OBD app (OBDFusion is my current favourite) and a wireless OBD scanner. I would look at your fuel trims to see where they are. Add the short term to the long term fuel trims.... They should be between -10% to +10% for a normal engine. You should also have a look at the post cat O2 sensor voltage. Here is a video I do for my other channel that may help: Understanding & Live Graphing of the Rear O2 Sensor: OBD4Everyone Ep.19 kzread.info/dash/bejne/k5qd0ZJsg9nFfbg.html

How are you sir? Well, i bought my car for n it has 80 miles and now has 170 miles on it. I never clean the TB. I kept searching for a guide video and they are many of them! However, you seem very confident and sure about what you are doing. Im thinking to follow your video but i heard ppl say “shouldn’t open that by hand”. I have g35 hr which is almost the same g37. What do you think? Thank you,

@MotorvateDIY

5 жыл бұрын

Hey ali alghanim, Very good question! If you have a 2007 HR there is an issue with the ECU after cleaning the throttle bodies and it won't complete the Idle air volume learning, which results in a high idle. If you have a 2007, I wouldn't do anything -or- you can contact Eugene Turkov at www.yelp.com/biz/enthusiast-auto-care-concord and he can load the 2008 ECU software on your 2007 ECU. It is my understanding the 2008 HRs don't have this issue. So if you don't have any issues, you may want to leave it :)

I heard it’s a terrible idea opening throttle by hand can really damage the motor & change the position since the pedal position sends certain voltage depending on position of pedal that determines how much the throttle should open

@MotorvateDIY

5 ай бұрын

Anyone who says that doesn't understand or know what is actually happening. They would clean the throttle body without doing the "idle air volume learning" and then have problems like a high idle. BUT if you clean the throttle body and then do the idle "idle air volume learning" you will have a stable idle and improved low RPM throttle response.

So I have a 2007 g35x and disconnected the cable on my throttle body when I cleaned it what do I do now that u say it you have to update it how do I do that plz get back ASAP thanks!!

@MotorvateDIY

4 жыл бұрын

Hey Jonah urban, You didn't mention what car you are working on, so... If you have a Nissan or Infiniti, there are three different special procedures that you need to do and you don't need any special tools: G37 & 370Z After Throttle Body Cleaning: Motorvate’s DIY Garage Ep.27 kzread.info/dash/bejne/en2dw6hphsS6nLQ.html If it is a different make, then your best bet is to do an online search. Good luck!

@jonahurban4552

4 жыл бұрын

Motorvate DIY sorry I have a 2007 g35x sedan

@jonahurban4552

4 жыл бұрын

Motorvate DIY I am also getting codes p0300 and p0021, I changed the pcv valve didn’t do anything checked all sparked plugs and gave them a clean coils looked good expect for the passenger side closest to back of the car coil and spark plug was covered in oil with a good big of oil in the plug hole what could this be or what should I do next / check? Thanks

@MotorvateDIY

4 жыл бұрын

Hey Jonah urban, Sorry, I didn't see that!

@MotorvateDIY

4 жыл бұрын

Hey Jonah urban, What happens when you start the car? Does it idle OK? As for the P0300 and P0021 codes, I would check your oil pressure. The VQ35/37 can leak oil internally and it lowers the oil pressure. Here is an episode we did: Oil Pressure Check: G37/370z - Motorvate's DIY Garage Ep. 18 kzread.info/dash/bejne/X32jmNSyqLqspLQ.html

Many videos before said you are not supposed to touch the butterfly valve... This is the complete opposit, i'm confused....

@MotorvateDIY

Жыл бұрын

In the making of this video, the throttle bodies were moved many times as I was trying to get the best camera angle. I didn't have any issues... BUT I did the Idle Air Volume Learning. If you don't move the throttle body to clean the edge of the throttle plate, you are not cleaning the area that controls the air flow. Google butterfly valve. I suspect in the beginning, the throttle plate was cleaned without moving it and it didn't cause any issues as the air flow characteristics were not changed, since the edge of the throttle plate were not cleaned. The throttle plate edge is the most important part to clean. If you clean the throttle body correctly and remove the carbon build up on the edge, yo must do the "intake idle air volume learning as you have changed the idle air flow. You will also notice the absolute throttle position is decreased since your trained the ECU on the new idle air flow characteristics. This shows the "idle air volume learning" has worked. As always, do what you feel is correct. On my G37, I can move the throttle body with the battery connected to clean it all day and as long as I do the "idle volume leaning" all is good.

I’ve always heard you’re not supposed to touch the plate on the throttle body. Is that a lie ??

@MotorvateDIY

2 жыл бұрын

For the Nissan/Infiniti 3.7 litre V6 I can tell you for a fact you can. I have done it multiple times. In the filming of this episode I ended up cleaning the throttle body 5 times in two days. AND all was well. Many people are not aware that on most drive by wire (electronic throttle) there is a additional procedure that need to be done, so the ECU can lean the new air flow characteristics of a clean throttle body. For Nissan/Infiniti that is the "Idle air volume learning" From episode 27: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

P1233 P2133 P0228 I received all these codes after tb coolant delete I need help

@MotorvateDIY

3 жыл бұрын

All codes point to the bank 2 (driver's side) throttle body. Check for any broken or damaged wires... Also unplug the throttle body connector it and check for any bent pins and plug it back in firmly.

wow I never thought of using a toothbrush

@MotorvateDIY

3 жыл бұрын

Hey Nazje Chatman, It is a great tool to use for cleaning throttle bodies, dust around buttons and dust in vents. Have fun cleaning!

Is this an ASMR ?? cause it feels good

@MotorvateDIY

4 жыл бұрын

Hey S, To be honest, I had to google "ASMR" as I had no idea what you are asking. So no, it is not a "autonomous sensory meridian response" video. Just me trying to help others. I'm glad you enjoyed it :)

Old video but you should NEVER move the TB plate by hand, reason is you'll mess up the electrical connection with the electronic motor, you got lucky and got away with that. Many had their TB hit the dust messing around with the plate. Correct way is to disconnect TB off the car, clean it in and out with tb cleaner, PUT NEW gasket and reinstall.

@MotorvateDIY

5 жыл бұрын

Hey Mohammed Hnoosh, I know specifically for the G35/G37/350z/370z (VQ35HR / VQ37VHR) that is not accurate. Here is the inside of that throttle body. kzread.info/dash/bejne/eoCFy9dqm72ZZZc.html The most important part to clean is the edge of the throttle plate, so you must move the throttle plate. AND after cleaning the electronic throttle body on a Nissan/Infiniti you must do these three steps after, or your idle might be high: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

@CFpinoy5141

5 жыл бұрын

@@MotorvateDIY i cleaned my TBs on my 07 350z and now its high idle and surging, it wont even wanna relearn

@MotorvateDIY

5 жыл бұрын

@@CFpinoy5141 Crap, I guess you didn't see the warning at the top of the video description for the 2007 G35/350z :( There is a software bug in the 2007 HR ECU and the idle air volume learning won't complete. Some have fixed this by the dealer updating the ECU, some have replaced the ECU with one from on 2008 (and reprogrammed the keys) and others have good luck with Eugene at Enthusiast Auto Care in California (www.yelp.ca/biz/enthusiast-auto-care-concord) to reprogram the 07 ECU.

@gersonescalante586

4 жыл бұрын

Hi I was wondering if you happening to know what specific tool they use to reprogram the ecu and if for some reason the ecu doesn’t program what then ?

@MotorvateDIY

4 жыл бұрын

@@gersonescalante586 I don't know what tool they use, but I do know that the reprogramming always works.

Why does this need to be done?, Is it something these cars have an issue with?

@MotorvateDIY

10 ай бұрын

The throttle bodies get carbon build up due to how the positive crankcase Ventilation (PCV) works: en.wikipedia.org/wiki/Crankcase_ventilation_system

Its o.k to open the butterfly when you clean it

@MotorvateDIY

6 жыл бұрын

Hey Joseph Passero, Sorry, but don't know if what you are saying is a question or statement... It is OK to move the butterfly valve to clean it. Just make sure to do the released pedal learning, throttle valve closed position learning and the idle volume air learning: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

@clarda1

6 жыл бұрын

There really needs to be a disclaimer on this video!!!!!!!!!!!!!. Manually moving the throttle body on these vehicles commonly results in damage to the throttle body motor. They are very delicate. I dont mean to be overly dramatic but even my local Infiniti dealer warned be about this.

arent you suppose to unscrew the bolts and disconnect the throttle body so you can also the the other side which is the dirtiest ?

@MotorvateDIY

4 жыл бұрын

Hey Akira Maruyamam, There is no need... Slowly push open the butterfly valve and use a toothbrush to scrub and clean both sides. -or- if you want to remove it, you can. The most important part to clean is the outside edge, as that is the part that controls air flow.

@JESUSISKING77742

4 жыл бұрын

@@MotorvateDIY oh I see thanks a lot for the info going to do mine soon just saw another youtuber remover it so was wondering why

@MotorvateDIY

4 жыл бұрын

Hey Akira Maruyamam, There are different ways to do the same thing, and get the same result. I show the way I like :)

im sure you can have sum1 sit in the car with car on not started put in drive butterfly should open then you can clean it like that.

@MotorvateDIY

3 жыл бұрын

Maybe.... with the drive by wire systems on the G37 & 370z, when the ignition is on, with the engine not running, the ECU is smart enough to know, if the engine isn't running, it won't open the throttle.

@Icu399

3 жыл бұрын

@@MotorvateDIY true that being said would it be any different to 35hr as i have 06 350gt sedan

@MotorvateDIY

3 жыл бұрын

I don't have access to a HR to test, so I really don't know. Maybe you could tell me?

No need to do a relearn?

@MotorvateDIY

Жыл бұрын

It is recommended and I have an episode right here for Nissan/Infiniti: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

WARNING: Do not do this for a 350z HR. For a 370z they might have changed it up. I unplugged the battery first, then I disconnected the throttle body sensors before disconnecting the throttle body to clean. I moved the butterfly valves to clean with CRC just like he did in this video. However, once I plugged everything back, my idle would fluctuate between 1000-2000 rpm. This is called the dreaded idle surge. You can not reprogram the car for the idle volume reset, since it is always surging. Took it to the dealer and they can not reprogram the car due to the surge as well. Best bet is to buy used OEM throttle bodies, or buy a whole new ECU to solve your problem due to the fact that moving the butterfly will short or fry your sensor in the throttle body or ECU.

@MotorvateDIY

5 жыл бұрын

Hey Bruce, Sorry to hear that you are having this trouble. I am going to do my best to help! Why did you disconnect the battery and remove the throttle body connectors? The video doesn't mention that... and by doing that you erase the ECU (long term fuel trim and others) which may of made your situation worse by changing 2 things to the car: a clean TB and a reset ECU. It would be VERY difficult to damage the throttle bodies, since they are very simple devices: just a DC motor, a few gears and a variable resistor. Here is what it looks inside the your actual throttle body: kzread.info/dash/bejne/eoCFy9dqm72ZZZc.html The VQ35HR and the VQ37VHR use the exact same throttle bodies, so I don't think the issue is specific to the throttle body.... now the ECU programming might be different. Questions: • How does the car drive when going 30-50 mph? • Does your idle still surge when the engine is fully warmed up? • Is the idle any different after driving it for a few days? • Is there a check engine light on? • What is the battery voltage at idle? (needs to be > 12.9 volts) Suggestions: • With the car off, remove and reconnect each throttle body connector (to ensure a good connection) • Reset the ECU: (from: www.titantalk.com/forums/titan-faq-how-area/25118-how-ecu-reset-throttle-accelerator-position-learning.html) Timing is extremely critical. If it is NOT DONE within the specify time, the ECU will not reset and the Check Engine Light (CEL) will continue to remain ON. A stop watch or an analog clock with a second’s needle will be useful. Operations Procedures 1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” and wait 3 seconds. 2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds. 2a. Fully depress the accelerator pedal (HARD). 2b. Fully release the accelerator pedal. 3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking. 4. Fully release the accelerator pedal (while the CEL is still blinking) 5. Wait about 10 second. 6. Fully depress the accelerator pedal and keep it for more than 10 seconds. 7. Fully release the accelerator pedal (The CEL light will continue to blink). 8. Turn ignition switch to “OFF” position and now you can start the car. By performing this procedure, ECM memory is erased and the following diagnostic information is erased as well. • Diagnostic trouble codes • 1st trip diagnostic trouble codes • Freeze frame data • 1st trip freeze frame data • System readiness test (SRT) codes • Test values • Long Term Fuel trim Now do the three steps in the "After Throttle Body Cleaning": kzread.info/dash/bejne/en2dw6hphsS6nLQ.html ** MAKE SURE THAT ALL PRECONDITIONS ARE MET OR THE IDLE AIR VOLUME WON'T COMPLETE ** There was one mention that the idle air volume won't complete if the coolant temp is more than 90C / 194F, so that may be something to try. If you have a bluetooth OBD scanner and a Android phone/tablet you can use this free app for the idle air volume learning: kzread.info/dash/bejne/gZ12m9axdaa9cpM.html Good luck and I look forward to your response. :)

@MotorvateDIY

5 жыл бұрын

I found this old technical service bulletin (TSB) alflash.com.ua/for/NTB05-067.pdf that mention to disconnect 1-2 fuel injectors to lower the idle so the idle air volume learning can complete. On the VQ35HR / VQ37VHR I don't think anyone's hand can fit between the intake manifold to unplug the fuel injector. BUT... This document (prostream.com.au/wp-content/uploads/2015/04/Nissan-IAVL1.pdf) on page 4 mentions to loosen the clamp by the throttle body and slighly open a gap, allowing un-metered air to enter the engine.. This should slow down the engine idle so the idle air volume procedure can complete.

@MotorvateDIY

5 жыл бұрын

Addition ideas to lower your idle so the idle air volume can complete: (from: productforum.autorepairdata.com/forum/showthread.php?t=4744) • Remove the air filter and use your hand to party block the air going into the engine • Step on the brake and put the car in drive Once the idle air volume has completed, repeat it again with the engine back to normal and in Park. Interesting option on Post 16: I figured before I replace the throttle body , I figure WTF do I have to loose, so I tell assistant to turn the key on , engine off, and to depress accelerator pedal WOT to the floor and throttle plate opens . Release the pedal, and throttle plate closes but it's still kinda open a bit, so I hold the throttle actuator plate completely closed and ask assistant to cycle the key off and then on a couple times while I'm holding the throttle plate completely shut when he turns the ignition key off against the actuator pressure as it automatically tries to crack the throttle open and closed after the key is turned off. I put the air duct back on and start engine and engine idle is good. Damn it worked, I wouldn't recommend doing what I did except as a frustrated last resort measure before sending a turd to the dealer and letting them throw a throttle actuator and ECM on it. I'm hoping something here will work for you :)

@OperatorKregs

Жыл бұрын

@@MotorvateDIY Love to see the detailed response in helping out your community!

@havenr.1601

Жыл бұрын

I might be wayyy to late lol, but yeah that doesn’t make sense to why your throttle body would get damaged. You are definitely just overthinking it.

Can you move that throttle plate manually on a electronic throttle body without ignition on and someone to press the gas I don't think so 🤣🤣🤣🤣🤣🤣🤣

Well this is obviously not an electronic throttle body because you NEVER touch or move the butterfly valve. If this is an electronic TB you just got very unheard of lucky if you TB is not damaged. The best way is to have someone in the car that switches the accessory mode on and off as you spray the cleaner... DON"T START THE CAR! This will open and close the butterfly valve correctly with out damage to the computer /TB I have always understood you never manually move the butterfly valve on any TB that is electronic

@MotorvateDIY

Жыл бұрын

This is on an Infiniti G37 that has a VQ37VHR which does have an electronic throttle. (look it up) On that engine you can move the throttle to clean it. In fact, in the shooting of this video I had to clean/move the throttle body 5 times to get the proper camera angle. What is true on one engine may or may not be true on another.

U not has to relearn sir?

Think he forgot to actually remove the throttle body and clean the inside back which is the actual worst part of the build up.

@MotorvateDIY

2 жыл бұрын

I don't think so... In the video I used the tooth brush to clean BOTH sides of the throttle plate. :)

Uhhh no no no never push open the throttle plate

@MotorvateDIY

2 жыл бұрын

In the specific example of the G37 (or any Nissan/Infiniti) you can move the throttle plate while cleaning it - nothing is broken and no damage is done. In the creating of this video, I ended up cleaning the throttle body 5 times and moved the plate many, many times and there was no issue. Here is a video we made that show the inner workings of a typical Nissan/Infiniti electronic throttle body: How it Works - Drive by Wire Motorvate's DIY Garage Ep.31 kzread.info/dash/bejne/qmisxbOMgqTNdqw.html

U should never push on a electric throttle body. It could mess it up

@MotorvateDIY

6 жыл бұрын

Hey familyand hope, That may be true for some engines, but it isn't true on this one. (VQ37VHR) In a future episode I will disassemble the throttle body and show how it works using a home made throttle body controller.

@story1234

5 жыл бұрын

@@MotorvateDIY How about the V36? Can we move the throttle body?

@MotorvateDIY

5 жыл бұрын

Hey familyand hope, kzread.info/dash/bejne/eoCFy9dqm72ZZZc.html Here is the inside of the throttle body on the G35HR / G37 or any Nissan/Infiniti with the 3.7 V6. There is nothing that cam be damaged by moving the throttle plate.

@MotorvateDIY

5 жыл бұрын

Hey story1234, I have not had any issues... Overtime, as the throttle body gets dirty, the engine computer adjusts to compensate for the dirt build up. When you clean it properly by pushing it open to clean the edge of the throttle plate, the dirt is removed which makes the slight opening a little larger. This results in a high idle, since there is a little more airflow. The fix for this is to run the "idle air volume learning" procedure to teach the engine computer how much air flow there is at idle. Most folks seem to skip this step and then think the high idle is from pushing the throttle plate. Here are the three steps that need to be done after cleaning the throttle body: G37 & 370Z After Throttle Body Cleaning: Motorvate’s DIY Garage Ep.27 kzread.info/dash/bejne/en2dw6hphsS6nLQ.html Here is the inside of the V36's throttle body:kzread.info/dash/bejne/eoCFy9dqm72ZZZc.html As you can see, it is just a simple DC motor and a variable resistor - and both of those are very durable. I think you will be just fine ;)

How hard would of been to remove those four allen bolts to take off the whole throttle body and do a proper cleaning.. if your gonna half ass it don't make a video of it

@MotorvateDIY

Жыл бұрын

All the videos here show what/how I do things. Feel free to do what you think is required to clean a throttle body.

Fail. That's not clean, you didn't get the back side, you can remove the throttle body from the intake plenum, reuse the rubber gasket/ o-ring providing you don't tear it. Don't unplug the harnesses from the assembly.

@MotorvateDIY

6 жыл бұрын

Hey Joe Jones, Actually I did... with the throttle body fully open, the tooth brush is used to clean both sides of the throttle plate. There really is no need to remove the throttle body, but if you feel that is required to clean it, that's fine. There are always different ways to do the same thing. The single most important part to clean is the edge of the throttle plate and the bore. This is what allows for very small and accurate air regulation.

In future don't touch throttle body just spray it by cleaner

@MotorvateDIY

5 жыл бұрын

Hey Ali Kurdy, That won't clean the most important part of the throttle body... The carbon from the sharp edge of the butterfly valve is what needs to be cleaned. The more open a butterfly valve is open from carbon build up, the less "fine" control of the idle airflow it will have. Removing the carbon from that edge, allows the butterfly fly to close more and give the required "fine" control of air flow. After cleaning the throttle body, it is important to perform the 3 calibration steps, including the "idle air volume learning" see: kzread.info/dash/bejne/en2dw6hphsS6nLQ.html

I have vibrations from auto g37. at 2000rpm. And I don't know what to do. I decided plugs and to replace the engine mounts with new original ones. I don't know how to solve it. Do you have an idea? I'm already afraid that the engine has failed

@MotorvateDIY

Жыл бұрын

I have very little experience with the 7 speed autos used on the G37, so I don't know how much help I can be. You might want to post your issue on www.reddit.com/r/G37/ or myg37.com They should be able to give you some direction and suggestions. Good luck!

I keep hearing the moving the butterfly valve will get damaged if we move them with the car off? Is that true or am I good to clean it as you have shown in this video? Thanks!

@MotorvateDIY

3 жыл бұрын

Many folks on the G/Z forums say that, but that has not been my experience. In the making of this video, I cleaned the throttle bodies 5-6 times and moved them a lot. I think this got started when people didn't know that an idle air volume learning was needed to be done after they were cleaned. ALSO the ECU bug in the 2007 G/Z didn't help. (the idle air volume learning will never complete)

@nathancalderaro340

3 жыл бұрын

@@MotorvateDIY Thanks for the feedback. I had no issues by following your steps and my pesky P0106 code is gone! Thank you.

@eternalflames581

3 ай бұрын

​​@@MotorvateDIYhey so would getting a new ECU then performing the idle relearn would maybe fix the problem?on a 2007 hr 350z

@MotorvateDIY

3 ай бұрын

Technically, there is nothing wrong with the ECU, it just need to be updated. The easiest option may be to see if the local dealer or Nissan specialist can update it to the current version.