Fully Restoration Antique Diesel Engine | Restore and reuse old and rusty diesel engines
Ғылым және технология
Fully Restoration Antique Diesel Engine | Restore and reuse old and rusty diesel engines
Diesel engine, also known as internal combustion engine or CI engine, was named after Rudolf Diesel. Diesel engines are internal combustion engines in which the fuel ignites due to the high temperature of the air in the cylinder due to mechanical compression. The diesel engine is used a lot in machinery such as water pumps, plows, cars... In this restoration video we restored the old diesel engine that was broken. After recuperating the diesel engine was in good working order. I have many shortcomings myself, hope everyone will share their experiences. We will do better in the next video. Thanks for watching our video.
Dear Mr/Ms
Thank you to everyone for taking your valuable time to View, Like, Comment on and Subscribe our video on the "restoration and repair all" channel. In the future we will try to find good to find good ideas and create good restoration videos to serve everyone. If you have ideas, please contribute with us.Please feel free to contact us. We would like to thank everyone once again for their support. We apologize if something goes wrong in the restoration videos .
#restoration_and_repair_all#restoration#restorationvideo#perfect_restoration#enginerestoration#dieselengine#oldengine#diesel
Пікірлер: 354
Sửa máy móc hay quá mình thường xem thanks you hi hi cảm ơn bạn nhiều bạn làm hay quá bạn hiền ơi
@skibiditoilet_ideas
3 жыл бұрын
Cám ơn bạn đã xem video của mình. Nếu thấy hay hãy theo dõi những video tiếp theo bạn nhé
lại như mới rồi , bạn làm rất tốt
@skibiditoilet_ideas
3 жыл бұрын
cam on ban
Wow! A yellow pipe wrench was COOL!!!
@skibiditoilet_ideas
3 жыл бұрын
Thank you for your compliments
Step by step job!
Mấy loại máy dầu này ở miền tây tui còn sử dụng đầy nhé bạn!
@skibiditoilet_ideas
3 жыл бұрын
Ở mình miền bắc vẫn dùng bạn nhé
Nhìn thao tác là biết ngay thợ bậc 7. Đây là một người thợ chuyên nghiệp.
@skibiditoilet_ideas
3 жыл бұрын
Cám ơn bạn nhé.
Schön restauriert und läuft wieder 👍👍👍
@skibiditoilet_ideas
3 жыл бұрын
Ja. Vielen Dank, dass Sie sich unser Video angesehen haben.
@user-bz6vk8oy1j
3 жыл бұрын
@@skibiditoilet_ideas 12000
Ilike this engine old is gold👌
Nice job 🙏
Very good engine.
I think you did a fine job, especially what you have to work with
@skibiditoilet_ideas
3 жыл бұрын
Thank you very much. I will try to do better. Please follow us on the following videos
@vedo7065
3 жыл бұрын
@@skibiditoilet_ideas 근데 저걸 복원 왜 하냐
@ekroekro7779
2 жыл бұрын
Vf pp00
Cảm ơn em đã cho anh xem clip này
@skibiditoilet_ideas
3 жыл бұрын
Cám ơn anh đã xem video này nhé
Чумовая рестоврация, разобрать, помыть в солярке, собрать, обассать серебрянкой и вуаля!))
@user-pp6io7ux6f
3 жыл бұрын
Так и без инструмента!! Одним газовым и разводным ключем
오 대단해요 시동이걸리네요 영상잘봤읍니다 구독하고갈게요
@skibiditoilet_ideas
3 жыл бұрын
감사합니다
@ere67673
3 жыл бұрын
@@skibiditoilet_ideas sibop ayarı yokmu
Very Nice Job👌👍 Keep it Up
휴~ 대단하군..
@skibiditoilet_ideas
3 жыл бұрын
감사합니다
dùng lọ sơn đểu là k ăn thua rồi
My favourite part is that there's no music in the background, just natural sound.
@skibiditoilet_ideas
3 жыл бұрын
Yes, thank you
@Bigslim93
3 жыл бұрын
The damn 80s porn times they play in thr background ruin it for lot of videos
@ronnyrn_
3 жыл бұрын
Yeah
@alideliboyraz5641
3 жыл бұрын
Yeah guys i am with u i hate wen the atupid music is playing. When music start i honestly can tell u i skip vid
Lindo trabalho parabéns.
@skibiditoilet_ideas
2 жыл бұрын
Muito obrigado
Động cơ này là mới sản suất đây thôi bạn động cơ cũ cổ xưa là loại có 2 bánh đà 2 bên đó mới là động cơ cũ cổ xưa
@skibiditoilet_ideas
3 жыл бұрын
mình chưa thấy loại động cơ bạn nói
Sao loại này đỉnh pitson nó bằng phẳng như máy xăng vậy
@skibiditoilet_ideas
3 жыл бұрын
Chắc máy nó nhỏ nên nhà sản xuất để bằng phẳng.
Thơ nay la giồng nè.ma giồng an long về cua người ta.
Với người nông dân Việt Nam hay sử dụng máy này thì điều này quá bình thường!
@skibiditoilet_ideas
3 жыл бұрын
Không phải ai cũng biết mà bạn. cám ơn bạn
good work
Mất 1 phút là nổ ngay chứ k cần phải tháo ra và sơn phết xấu thế đâu
@skibiditoilet_ideas
2 жыл бұрын
Minh thay cả bô hơi mà
Bermanfaat sekali vidio nya Mantap bang 👍
@daudjabaransmarr.8725
3 жыл бұрын
Ok
@skibiditoilet_ideas
3 жыл бұрын
Terima kasih
Good as new.
@skibiditoilet_ideas
3 жыл бұрын
Thanks
FICOU OTIMO
@skibiditoilet_ideas
2 жыл бұрын
thanks
Làm tốt lắm, nhưng dụng cụ còn thiếu
@skibiditoilet_ideas
3 жыл бұрын
Cám ơn bạn
I like this kind of restoration 🥰
Good job bro...Bravo man...
Wonderful job 👏
@skibiditoilet_ideas
2 жыл бұрын
Thanks you
Ng việt nam hả 😁😁
I’ve never seen bolts come out so easily from an old rusted out engine 😳
@skibiditoilet_ideas
2 жыл бұрын
I shot it out first
Keren, disel berapa pk bang kecil bagt
👍👍👍👍👍
Good job .well done
@skibiditoilet_ideas
3 жыл бұрын
thanks you
hai anh thợ này làm nhanh cái tay lên
@skibiditoilet_ideas
3 жыл бұрын
Chúng tôi sẽ cố gắng làm nhanh hơn nữa. Cám ơn bạn đã xem và bình luận.
👍mesin swan
👍
good job.
@skibiditoilet_ideas
3 жыл бұрын
Thanks you
Jadi ingat mesin pencari ikan halus dulu
@skibiditoilet_ideas
3 жыл бұрын
thanks you
Quá bình thường
New !!
Hay anh ạ
@skibiditoilet_ideas
3 жыл бұрын
Cám ơn bạn
Cool
@skibiditoilet_ideas
3 жыл бұрын
Thanks
Good job
@skibiditoilet_ideas
3 жыл бұрын
thanks you
Heel mooi voor elkaar proficiat..
@skibiditoilet_ideas
3 жыл бұрын
Hartelijk dank
Thank you for posting this video
@skibiditoilet_ideas
3 жыл бұрын
Thank you for watching our video and commenting
Diesel fuel would have cut right through all the old grease and oil just get a couple of gallons and let it eat the stuff off the block.
@skibiditoilet_ideas
3 жыл бұрын
We also use diesel and gasoline to clean the inside of the machine
@cptyler150
3 жыл бұрын
@@skibiditoilet_ideas wow thats great.. where did you get the gaskets from.. I thought you had to use RTV gasket sealer since the machine is quite old
Máy này cái bơm nhơt năm chổ nào ban.mình cũng có 1 con ntn nhung k biet nơm nhớt nằm dau cả
@skibiditoilet_ideas
2 жыл бұрын
Bạn xem hết video là thấy mà. Mình có quay chỗ đổ nhớt cũ đi mà
wow
Thanks Nice Work
Нормально так клапан принтер молотком на четырнацатой менуте
@skibiditoilet_ideas
2 жыл бұрын
да. Я перемотал видео вперед, чтобы не скучать. Спасибо
귀엽다😊👍
@skibiditoilet_ideas
3 жыл бұрын
감사합니다
Keep up the good work!
@skibiditoilet_ideas
3 жыл бұрын
Thanks you
2 anh thợ này xịt sơn đểu
@skibiditoilet_ideas
3 жыл бұрын
Sơn xịt trai nhỏ bạn ơi. Không phải sơn đểu nhé chỉ không đẹp bằng sơn pha phun thôi.
작업하실때 장갑이라도 끼고 하셨음 좋겠네요 잘못하면 손다치겠어요.
@skibiditoilet_ideas
3 жыл бұрын
예, 귀하의 의견에 감사드립니다. 다음에 장갑을 끼겠습니다
경운기 엔진이네여 ㅋ
@skibiditoilet_ideas
3 жыл бұрын
맞습니다. 이것은 워터 펌프 모터입니다
This reminds me of a giant 1 ton 4 cylinder engine from the very early 1900s I saw in the woods on my friends hunting property. I think it was for an old oil pump or something like that he told me .someday I’d like to drag it out of there and see if I can get it to work.although now that I think about it I remember being able to see the crankshaft though an open panel and water being inside....
@skibiditoilet_ideas
3 жыл бұрын
thanks you
Nice video
@skibiditoilet_ideas
3 жыл бұрын
Thanks you
Cleaning injector parts in liquid full of dirt 😳 should change the nozzle and lap the parts before reassembly ! Those nozzle are cheap to purchase usually they are Bosch DNOSD ***. Nice restoration !😊
@skibiditoilet_ideas
3 жыл бұрын
Thank you for your comments. We found the injector still working well so we didn't replace it.
Please do not clean oily machinerie in river or stream !!!! J. Canada
@skibiditoilet_ideas
3 жыл бұрын
We just clean up the dirt that gets on the device on the river. Oil and grease on the machine we use gasoline to clean at home. Thank you for your comment
와 50년전에 보던거네
@skibiditoilet_ideas
3 жыл бұрын
감사합니다. 나는 언제부터 몰라
good job
@skibiditoilet_ideas
3 жыл бұрын
Thanks you
Tháo ra rửa sơn lại ráp thoi có gì mà xem
@skibiditoilet_ideas
2 жыл бұрын
Mình đã thay thế và sửa chữa những phần hỏng mà bạn.
what a cool little engine I love it
Sơn cái máy gì kỳ cục zay trời..
설명을하면서 수리를 한다면 더욱 제미가 있을것 같네요.
@skibiditoilet_ideas
3 жыл бұрын
귀하의 의견에 감사드립니다. 다음에해볼 게요
Yanmar NT 90 series I quess. Nice work.
@skibiditoilet_ideas
3 жыл бұрын
Thanks
Sorry to be negative but i cringed when i saw the condition of his hands while installing the piston rings and the condition of the piston during installation. i was trained differently and when my mother saw me rebuild an engine at home she said but you work just as clean as a doctor. My work area, tools, part and my hands had to be scrupulously clean.
@skibiditoilet_ideas
3 жыл бұрын
Yes. Thank you for the comments. I will try to clean up on the following video.
@swyoung69
3 жыл бұрын
Dude...did you see their valve spring compressor and sleeve press? Maybe thats as good as it gets there. Just sayin.
@mallacai8753
3 жыл бұрын
@@swyoung69 that’s exactly what we used back then. The kind of tools I see being used on these vids I am supprised how easy it got the work done.
@jmitchell8164
3 жыл бұрын
Get a grip. They did a great job.
F4 này mà cổ
What make and model is this engine? How old is it? Where did you get it from? What was it used for? It's nice to know the history behind these restorations.
@skibiditoilet_ideas
3 жыл бұрын
This is a water-cooled D4 diesel engine. it is over 5 years old. It is used to pull water pumps. I was given a gift from a friend. thank you for watching
@wowjchehwksm610
3 жыл бұрын
@@skibiditoilet_ideas I mean. You're technically correct
Good job guys, I’m sure it will be very useful for you. Please wear gloves as dirty oil and grease are a known carcinogen. Cheers Stuart 🇦🇺
@skibiditoilet_ideas
3 жыл бұрын
Thank you very much. I will wear gloves next time
@jmitchell8164
3 жыл бұрын
We need more people willing to get their hands dirty. I doubt many will get cancer.
@scroungasworkshop4663
3 жыл бұрын
@@jmitchell8164. What ever you say. My statement is based on professional advice as we had a Castrol engineer come to a club meeting to talk about oil and it was him that warned us of the dangers so it’s not just something I made up. What’s your opinion based on?
@jmitchell8164
3 жыл бұрын
@MYRMIDION Idiot? Really?
@jmitchell8164
3 жыл бұрын
@MYRMIDION I doubt OSHA is where he is. Just enjoy him refurbishing the engine.
Động cơ dầu D4 r170 mà bạn 😉😉😉
@skibiditoilet_ideas
3 жыл бұрын
Uh nó là động cơ diesel D4 ( động cơ dầu D4 R170)
@hoangnam1935
3 жыл бұрын
Cai.may.nay.co.phai May.dau.8.khong.banhay.that. May.cu.gio.thanh May.roi
@skibiditoilet_ideas
3 жыл бұрын
Nó là máy 4 làm mát bằng nước bạn nhé. Còn loại máy 4 làm mát bằng gió là loại khác.
Ôi mang bao tay cau su mỏng vào
@skibiditoilet_ideas
3 жыл бұрын
Vâng cám ơn bạn đã góp ý
Super gemacht 👍👍👍
@skibiditoilet_ideas
3 жыл бұрын
Thanks
Con D6trung quốc cùi bắp hồi ơ Quê tui sửa cho mấy ông bạn tác nước đìa
14:42 I wonder it seems you put the notch of 3 piston rings on the same position(same side)?
@skibiditoilet_ideas
3 жыл бұрын
Are not. Did I put the notches of the 3 piston rings on different positions (3 different sides) . Thanks you
@winstonsheu1193
3 жыл бұрын
@@skibiditoilet_ideas I think that the best way is the notch of first and third ring on the same position, and the second on the opposite 180 degree, it will make best closeth.
@davog1946
3 жыл бұрын
@@winstonsheu1193 makes no difference, rings spin in the bore. First time you start it your lovely ring staggering is a waste of time.
Adu vjp
ㅋㅋㅋㅋㅋ👍😄
Hi, mere paas me 10ho ka Machine he chalu karne me jam chalta he? Please bataye kya karna padega?
Cho em theo học nghề với a?
@skibiditoilet_ideas
3 жыл бұрын
Em cứ xem video . Xem kênh của a mà học.
It´s a great job, engine is live again.
@skibiditoilet_ideas
3 жыл бұрын
Yes. The engine worked fine. Thank you very much
@skada5866
3 жыл бұрын
@@skibiditoilet_ideas
맨손으로 기름 세척제 만지면 아주 위험한데.
@skibiditoilet_ideas
3 жыл бұрын
조언을 해주셔서 감사합니다. 다음엔 장갑을 쓸게요
ディーゼルなのにピストン平なんだ 初めてみた。
@skibiditoilet_ideas
3 жыл бұрын
平らなピストンがたくさん見られます。 空気圧縮機でもフラットプランジャーを使用します
Полная хрень!!! Рабочий дизель испачкали, разобрали, помыли, собрали.))
@user-gn8rj2wj9j
3 жыл бұрын
Согласен. Если бы это была ржавчина хрен бы они так легко его разобрали. Даже ни одной шпильки или болта не сорвали.
@joaodomingosboff603
3 жыл бұрын
Concordo. Se tivesse jateado com hidro jato de areia e passado uma gasolina no reservatório de lubrificante e depois pintado, daria no mesmo......
It'll do the job and it'll run but it probably won't last that long
なるほど
@user-sx3ee1ji7l
3 жыл бұрын
これが。ちきゆうなら。
@skibiditoilet_ideas
3 жыл бұрын
はい、ありがとうございます
Leaking like crazy ?
Bác đánh hết rỉ sét rồi xoa một lớp dầu e nghĩ đẹp hơn là sơn nhìn cùi mía lắm
@skibiditoilet_ideas
3 жыл бұрын
Sơn lớp dầu gì bạn. Máy móc họ toàn sơn cả.
Please, don't idendify my comment like a bad thing. I try all my best to preserv so much things in his history. But these motors, after your restauration, seems like a new motor! Another person, who fixes old motors, said the same thing. Please, listen to us and take care when you paint it. Thanks and congratulations!!!
Loại này của hãng nào vậy
@skibiditoilet_ideas
3 жыл бұрын
Nó han quá mình cũng không biết hãng nào. Cám ơn bạn đã xem
분해해서 세척 조립 동력 💕👍🇰🇷😁💕
Mong anh trả lời ạ Làm sao nghe tiếng nổ để biết máy cũ vậy anh
@skibiditoilet_ideas
3 жыл бұрын
Máy cũ nghe sẽ không được giòn e nhé
@Aloalo18386
3 жыл бұрын
@@skibiditoilet_ideas e cảm ơn a
Phục hồi cái gì ông ơi. Đâu phải máy nào cũng mang tháo ra hết vậy. Quay bánh đà coi còn sức nén k. Nếu còn vệ sinh dầu là nổ. Ông tháo ra sơn lại xấu quắc.
So my old shop teacher was wrong when he said "the right tool for the job. Don't be a caveman"
You should change injection and pump elements...works unstable
@jessemcbride226
4 ай бұрын
thats air in fuel lines
Washing these things in open source of water causes water pollution.
@skibiditoilet_ideas
3 жыл бұрын
Thank you for your comments. We will note next time
😁👍
@user-rm7hs4fs5x
3 жыл бұрын
سلامHello