I had to re-upload this video due to some audio issues. There were about 16,000 views and 150 comments that got deleted with the old video. My fault for the mess up! Please if you left a comment or like, leave it again and I will get back to as many as I can! You guys ROOOOCKK 🤘🤘🤘

@MxShee

2 жыл бұрын

By now youtube should allow us to reupload a deffective video without loosing everything, it’s kind of bs they havent found a way to do it yet.. i understand it would be easy to upload a completely different video but there has to be something that can work

@legendary_lemon1177

2 жыл бұрын

That tripped me out, lol I watched half before work, then tried looking for it after work and it was gone, I was like man I know I’m not crazy.

@abbybonilla4511

2 жыл бұрын

@@MxShee YT has become trash ever since the demonetization drama.

@MichaelSabo

2 жыл бұрын

@@MxShee I agree man, but as far as I know, there's no way to fix it unless you're willing to clip out the section.

@Bl8nkk

2 жыл бұрын

Hey Mike love the voodoo banshee build and all the other build you do also can not wait to see what you do with the trailer love from the uk

I'd love to see some dyno testing on different fuels on a 421 to show gains for compression, fuel etc BEFORE the powerband starts. My 521 serval lugs well on pump gas but I sure didn't build it for before the powerband activities.

@MichaelSabo

2 жыл бұрын

I'd love to do that to see the data. I am trying to find a somewhat local reliable chassis dyno for ATVs so I can start doing that regularly.

@dansavka7648

2 жыл бұрын

Haha damn.. Your like me! I have an 02 lightning build engine.. Crower 527 lift cams, 80 lb injectors and walbro pumps, h beam manly rods, crank and springs.. Patriot ported heads.. Whipple charger.. Dyno tuned.. Im kickin about 600hp.. My banshee(I hace two) one runs on alcohol and i rarely ride it.. The other set up for trails 4mil athena build.. The 4 mil with all the bolt ons.. Im looking for a 86-88 cr500r bike

@Sleeper_Banshee

Жыл бұрын

I could get you the results on that in a day at driveline lol

@rcbashnatic5395

Жыл бұрын

@@Sleeper_Banshee a car dyno has completely different resistance than a atv or mx dyno

@Sleeper_Banshee

Жыл бұрын

@@rcbashnatic5395 wtf are you talking about. My comment was to svtbanshee guy.

You give me so much inspiration man. I’m restoring a 2001 Yamaha blaster. I’m painting everything and doing it myself and it’s been a hell of a project. You have taught me so much…Can’t wait to get my hands on a Banshee in the near future!!!

@MichaelSabo

2 жыл бұрын

Dude that's awesome to hear! Good luck finishing your Blaster and soon you'll be doing a Banshee as well 🤘

Hey man the attention to detail and time you spend on your builds and videos is worth my time watching over and over! I love how you take the time to adjust the camera for us to see everything and you put a twist on your bikes when a lot of guys keep them stock. Keep the vids coming buddy!

Another great video sir , always learning something new in your vids .. keep up the good work

Good deal bud, you fixed that exactly how I would have. I can’t wait to see this project grow! You’re doing great things on your channels!

@MichaelSabo

2 жыл бұрын

Thank you for the love man 🤘

Thank god its back. This video is amazing. Watched it 3 times now

The tight stuff in the trees scares me more then when I see the front tires come up at 70mph . Great ride! I think you are right if that gaurd is plastic it might have contributed to the torque loss of the nut

@MichaelSabo

2 жыл бұрын

I agree man, its the tight trees that you end up snagging!

Your riding skills are absolutely insane, the amount of control you have is amazing, awesome riding and the voodoo looks and sounds great keep it up👍👍

@MichaelSabo

2 жыл бұрын

That's a big complement man, my riding skills are something I've been working on improving 👍

Your content is on point, like that you show your wins and fails. Definitely one of top channels on youtube.

Love the detail you put into both the videos and the quads. You got some of the best editing (after some re uploads) that I can find. I dream of making a quad like that dude so keep it up!

@MichaelSabo

2 жыл бұрын

Thank you for the compliments on my videos and machines man. Good luck doing your own dream build 👊🤘

@arm2896

2 жыл бұрын

@@MichaelSabo love to see some HP numbers too. Where you located?

@Golden-69

Жыл бұрын

There is nothing like Banshee. I haven't driven my 14 years. I'm working on it right now for my son, who wants to ride. I know what it can do. 95mpr on sand. You got to love the power.

Awesome footage of you ripping the voodoo banshee down the trails. Content keeps getting better and better.

@MichaelSabo

2 жыл бұрын

Thank you Roy 🤘

Just found your channel- awesome content! Watched the build, so nice to see someone who has the skills, good taste and passion to build a top quality machine like this. Even better, thrash it and it put it to the test like you did. Thanks, looking forward to more of your content. Good job!

New subscriber love the Vids ! Crazy torque crazy!!! Can’t wait for The raptor vids !

Awesome mike I’ve been waiting for you to post a riding video of this 👍👍 keep up the great work

@MichaelSabo

2 жыл бұрын

Thank you for watching man!

Cool air box fab! Thanks for showing that process! Really shows how much time and care you put into everything you do!

@MichaelSabo

2 жыл бұрын

Glad you like it man, thank you for the love 🤘

I love that ting man that’s a beast good riding keep up the good work

What a beautiful machine man one can only dream. Your content is amazing I’ve learnt a lot from you Never stop uploading brother!!!

I felt that when he said “I was mean to this machine”. Voodoo looking like a straight victim 😢 tough to see him send it over those rocks.

I think this is the best part of a build , smile & enjoy your machine good job 🔥🔥

Love to see you happy on your four wheeler. Wholesome 🤗

So Awesome Mike !Great tips, great video!!

super cool banshee ! love the restoration vids Sweet🤘

Great build and that airbox is rad. I like watching your channel as well as Pete Hagers channel. I love all the custom work and fabrication you do and not only is it fun to watch it also allows me to learn at the same time so I can better grow my skills when working on atv's. Keep up the good work Michael 🤙

I've never been on a quad before but I watch all of your videos. This banshee is dope!

I bought a 2010 brand new and put 150hours on it and then sold it! Wish I still had it, at the time I sold it in 2012 they were still available brand new in Australia so I thought I would just buy another one in a few years time. Now they are hard to find even second hand, people don’t want to let them go. Beat quad bike every made. Awesome channel, you’re the Banshee legend!

Hell yeah Mike! That’s what I’m talking about dude! Having good friends and contacts that can help make your ideas come to life is irreplaceable

@MichaelSabo

2 жыл бұрын

This is 100% true man. Thank you for the love as always Jon 🤘

I also run a water jet at a glass company in western Pennsylvania and was also a machinist at a couple tool and dye shops. Great riding video and that's why it's nice to have a riding buddy for times like these. Helped me several times over the years. P.S. That sprocket/bolts ain't going NOWHERE!!!!

Hell yeah man I been waiting for this !!!! Bike screams!

@MichaelSabo

2 жыл бұрын

Thank you bro 🤘

I love watching and rewatching all of your videos. Just very fun and interesting to watch. This banshee is my dream bike. Hopefully I can make something like this one day

This quad is badass.... top-notch video bro

Your content is so GOOD you should have 500k subscribers. Thanks very informative.

The footage of you getting on it is awesome... My favorite part... Tides me over until I can do it myself

Keep up the great work! Awesome content brother 🤟

@MichaelSabo

2 жыл бұрын

Thank you bro!

Great video! No ones perfect! And the quad is so cool man!!!

I had a Cheetah Banshee build circa 2009 sold it…your tutorials are top notch, phenomenal!! If I build another one, it will be a Voodoo replica!!

Awesome build bro as would love to have my old banshee back to rebuild. Your work is amazing as mine wouldn’t come close to this as your knowledge from motor to chassis is very good.

Seeing you fixing your quad is as fun seeing you building it🤘🏼

Dude I've been wanting one of these since I was like 12 yrs old (46 now). I had a Blaster when I was kid but the Banshee...man thats what dreams are made of lol. Congrats

Nice that you actually ride your builds hard! Looked like big fun 🔥

It’s a beast. Love the actual issues and fixes

Lots of power lots of torque and still running you should be proud cuz I'm proud of you keep building like that I would love for my machine to do their system me while I was out there after getting it from you

Super clean work .

Dude that banshee is sick Mike. Congrats on the build man, you killed it.

14:25 is like the most American moment ever. Full blast Banshee racing against a 450 dirtbike, in the middle of nowhere and miles and miles of empty track ahead. Wish I had that in the Netherlands.

@notagunfreak8146

Жыл бұрын

how fast where you going about there, on the camera it looks at least above 60 mph

Killer video Mike. Probably one of my favorites so far.

@MichaelSabo

2 жыл бұрын

Thank you Scott, I'm glad you liked it 🤘

Awesome video as always x2👍👍

@MichaelSabo

2 жыл бұрын

Thank you James!

Very talented dude. Props 🙏🏻🇺🇸

That’s why I’m in love with Oregon dunes so much fun and bikes still stay so clean

I ride in the same area's. I went with 22in tires on the back to give me some extra ground clearance. The quads have more than enough power for a trial ride. I have an 87 Lt250r. Great video. Keep them coming. 👍🏻

That is one wicked Banshee🔥🔥🤙🏾

Awesome video as always Micheal

I'm a new subscriber, I grew up in the desert riding a Blaster!! It was a BLAST! Now I ride a Can-Am x3! 😉 (easier on the body) I dig your work style (clean and professional) I really enjoy this content! 👌 thanx.

Old school tip. Paint brush cleaner will raise the octane to 114. The paintbrush cleaner has xylene ,toulene& acetone in it. All which are the prime ingredients to the octane boosters we buy in the store

Those guards took beating seeing that held up so good order some for my 450r I been working on always love your show man great work looking forward to next one

I had the same problem with my DRW sprocket guard. The material compressed around the bolts and I had the same problem you did. So I just got a billet sprocket guard. You live and learn.

Amazing content Mike! Would love to see a Renegade build in the near future. Keep it up!

That sound man 😍👍

I think it would be super cool if you took every machine you build out and test them like this. Man you really had me and the edge of my seat this channel has gotten so good I'm constantly checking every Friday for new videos. Keep up the great job brother btw I love the new toy hauler. Hope to see you out in Indiana I got a fresh banshee and raptor 660 it's funny we both built the same quads this year. Q-vo all the way from New Mexico!!!

you inspire me man I got a 2005 and you making me understand my quad better

@MichaelSabo

2 жыл бұрын

Happy to hear I can inspire you bro, good luck with your 05 🤘

Another awesome video man! Had to go outside and kick over the old 88 250r and go for a blast. Nothing like a 2stroke!!

When it looks fast on a gopro, its FAST!! Awesome build!

That thing is insane 😎💯

Looks like the rotator cuff's working as it should now. Bravo. Thank You

I know you are focused on light weight… I put 23 inch front and 22 rear inch tires for my trail quad. Your channel is soooo awesome. Really love the genuineness of how you are. You Rock.

@MichaelSabo

2 жыл бұрын

Thank you logn! I have always been curious to try 23/22 tire setup. I imagine it would help a lot with rocks!

Love your videos

That thing looks insane! 🔥

@MichaelSabo

2 жыл бұрын

Thank you Jose 🤘

great vid. really cool airbox. well done mike

Damn that thing sounds SWEEEET 🔥 Nothing better than the sound and smell of a 2 STROKE 🔥👍✌️

Amazing video👌

Love it 😀

@MichaelSabo

2 жыл бұрын

🤘🤘

Building my 06’ now. Waiting to get the parts back from powder coating. Full motor rebuild with the hot rods crank and Alpha cub cylinders. Thanks for the 10% discount code from BPR !!

The banshee sounds amazing. Can't wait to see what it can do once its all dialed in

God damn bro that thing is a animal 😳 you hit that power band you wanna be hanging on sounds amazing to love the vids keep it up man

@MichaelSabo

2 жыл бұрын

Thank you man, she sure runs fine 🤘

Good work!

Hey Michael I just wanted you too know I’m going through a break up and it’s beating me up really bad but thank you for ur videos that can teach me how too fix bikes and also distract me from what’s hurting me I just wanted too tell you thank you for being you and still on that grind god bless too you💯

@MichaelSabo

2 жыл бұрын

Sorry to hear about your loss man, there's no worse pain than heartache, but it will make you stronger and better. Thank you for the love on my videos and I will keep the videos coming 👊

@brandonstewart6753

2 жыл бұрын

Think of all the good times beating those guts. Even tho it'll never happen again. That will help bro.

@GBDunknRollCD

2 жыл бұрын

@@brandonstewart6753 That’s the worst thing to think about🤣

@brandonstewart6753

2 жыл бұрын

@@GBDunknRollCD you think bro? He should tell her he loves her. Let the air out of her tires then offer her a ride. With flowers of course.

@cutter1884

2 жыл бұрын

@@brandonstewart6753 Wow Dude. What a shitty thing to say. Chill out man.

Watching every video and crying myself to sleep beacuse I allways wanted one quad for me but never had a chance or money to buy it. Anyhow good joob, one more uniqe youtuber and content style.❤️

That bike is a pure widow maker. nice work built with love ❤️ 👌

@MichaelSabo

2 жыл бұрын

Thank you for the love Sam!

Insane banshee !!!

yooo dude you went crazyyy on the rocks fam for real

@MichaelSabo

2 жыл бұрын

Hahaha, I feel bad for the Banshee

Re-upload = re-like and 👍Up! Great work as always Michael! Thanks!

@MichaelSabo

2 жыл бұрын

Thank you for swinging back through to re-support 🤘

keep rocking the videos

I have an Armadillo skid on mine. its thick alu and covers both sprocket and brake rotor. Its been really good. Northern Ontario is very rocky too. I never go past third gear cause my arms cant handle it on our trails. Steel is real! I never aim for the rocks. I always look for the smoothest line. It has some good dents in it from hitting hard. Voodoo looks great. It looks like it wheelies really easy with all that power!

Dude that thing is sooo badass

Man this build Brough me back to Quad I just bought a TRX 450 and this thing remind me how fun it is to riiip on 4 wheel instead of 2.

Great build.

Love the color combo on the Voodoo monster.

Sick man

thing sounds wicked on the pipe. love the new look. im curious how the ride felt on the bike. i know it was really beating you up before the rebuild. keep up all the great builds.

Damn that thing is wicked!!!

Love the videos mike should do a full swingarm skid may be a lot better just a idea keep up the amazing content 🤘🏽

JEEEEZ THAT THING IS A BEAST

Wow this just brought me back to ripping around in southern Oregon

Ihr seit die Geilsten weiter so👍👍

i really wanna get a quad or a dirt bike. so sick man. love your videos

that rear sprocket and cover will never come apart.. looks absolutely bullet (rock) proof!!

Hell yeah man good build

@MichaelSabo

2 жыл бұрын

Thank you bro!

Yooo at 13:40 u hit ever gear perfect!!!! It look like hexes trying to keep up but the RMZ was no match for the voodoo banshee ❤😂

That thing dominated those hectic rocky roads. Impressive at speed.

That's what I'm talkin about man that means you build a a great machine