1) 1000cc with 1 cylinder!!??? wowwww.I’m curious about the make and model. 2) the broken parts of the frame looks like they were already poorly welded and broken again 3) false rust (over paint) which is only dried mud or rust effect paint 4) welding of the chassis without a geometry guide and with concrete bar!!!??? = unstoppable and dangerous motorcycle 5) grinding and welding of the piston without disassembly 6) reassembly of not cleaned motor inside (crank, gear box, cooling system....) and reassembly of cases without joints 7) reassembly of rusty camshafts 8) painting a dirty and greasy engine 9) poorly and dirty painting on tank disapears on final reassembly It's obviously not the same motorbike at the beginning and at the end. All that is fake. What you did to the broken motorbike will never work. You did'nt do restoration but massacre. Fake video.

@mlmerricks

11 ай бұрын

Not a single gasket to be found, welding on aluminum with steel, probably improperly timed judging by the installation of the valves and cams. This whole thing is just OOOF!

@legionkumar5471

10 ай бұрын

honda cbr 150r

@q3511

10 ай бұрын

Thanks for saving me the time to write this up.

@gatot4621

9 ай бұрын

1000cc.... Sebuah kebohongan...ini seperti Honda CBR 150cc..🤦

@user-xc1hp7nz4n

9 ай бұрын

Я это тоже смотрел на одном дыхании. Думал что они его обратно выкинуть должны в конце😅

La supuesta moto restaurada y la moto final son totalmente diferentes. Me tramó su forma de soldar, no se cuantos preinfartos me hubieran dado si no fuera porque a leguas se notó el montaje :D 😁😁😁🤣🤣🤣🤣🤣

После такой реставрации его еще раз надо реставрировать!

@greenhat7742

Жыл бұрын

Да тут весь канал - один большой троллинг "реставраторов" :))) Заварка поршня, приварка рулевой - вообще адъ и израиль :) Покраска по окислам и ржавчине, сборка двигла со ржавыми распредами и ржавой корзиной сцепы - бест оф зе бест! На фоне этих юмористов даже е.матвеев - лох колхозный :)))

@Kompot_rp

Жыл бұрын

Ты же понимаешь что это не имеет никакого отношения к реставрации и в конце ролика совершенно не то что он так усердно в тазике всю дорогу моет?

His welding knowledge is overwhelming: the rear suspension, the crankcase, and finally the piston. I must have missed these techniques during my apprenticeship.

@tommyarmour68

Жыл бұрын

Im not too sure I would trust the piston, or the engine build in general. But hey they were not trying to break the bank on this restoration either.

@davisMP

Жыл бұрын

Se suelda así para no agujerear la chapa y para dar relleno a un material muy fino

@mioselalu142

11 ай бұрын

Halo my frends from indoneisa🔔🇮🇩

@user-mp2zs1fb1b

8 ай бұрын

Это ужасная халтура а не как не реставрация!

I can’t be the only one completely concerned through out this entire video 😅

@darrenkaspers9331

Жыл бұрын

100% bodge

@stephenoldfield3710

10 ай бұрын

Should come with a health warning….built for entertainment purposes only 😂

@mekko2012

10 ай бұрын

i'm still waiting for the transmission restoration, feel like incomplete

@johncorlett3699

4 ай бұрын

6x10 warranty........6 miles or 10 minutes, prettyish on the outside, argh on the inside.......

@malcomhaye-re3zo

25 күн бұрын

38:01 😅pop 11¹​@@mekko2012

Damn.. 1000 cc with single cylinder😂😂

@Cv_Chung

8 ай бұрын

Những chiếc xe 1000cc sẽ có 4 xi lanh 😅

A moto do final do vídeo e a sucata do começo não são a mesma. Por que você acha que ele pulou a parte mais importante que seria recolocar o motor no quadro, religar todos os sensores e etc, e pula para a montagem das carenagens ? Um motor nessas condições não volta a rodar simplesmente com uma "limpeza" mal feita como no vídeo. Isso só falando por alto sem entrar em detalhes. Olhem por volta dos 30 minutos do vídeo como as carenagens pintadas sem lixar estão cheias de relevos e olhem na montagem final como a pintura está lisa só com uns descascados na pintura, da mesma forma o motor.

@Rinoeldosvideos

Жыл бұрын

And more.. the bike to stay in that state of "decomposition" would only likely be possible to be immersed in water for years.. but, notice that copper wires (the face is dirty but the copper is perfect) rusty aluminum parts, rusty tires, and even rusty plastic? Where have you seen it? So nothing beats this video!! E mais.. a moto pra ficar naquele estado de "decomposição" só seria provável possível de estivesse emergina na água por anos.. mas, notem que fiações de cobre (a cara esta suja mas o cobre está perfeito) peças de alumínio com ferrugem, pneu com ferrugem e até mesmo plástico com ferrugem? Onde já se viu? Então nada se bate neste vídeo!!

@theu9584

Жыл бұрын

Meu irmão, o cara deixou o motor enferrujado, preto, td encardido e sua preocupação é essa??

I love the rusty plastic and rubber lol

I could tear this thing apart really fast. But I could never put it back together. Absolutely amazing work, and memory of where everything goes. Not in a million years would anybody tackle this project. Thats what I thought anyways

@Tomo01234

11 ай бұрын

fake restoration video

@pinosinogaming5776

11 ай бұрын

Sir everything is cover with video,After you take apart and see video,you will be able to notice all the part in the same place

Absolutely incredible. I would not have thought it possible. I like the way the hole in the piston was merely welded and not replaced. I would like to have seen a bit more on the work to get the engine running. I'm sure it wasn't just press and go.

@jayabdih1

10 ай бұрын

nice

@HoldenCaulfield0_0

8 ай бұрын

You need at least milling machine to make that piston work. I actually don't really believe this restoration, that bike was too broken to make it work that easily. A lot of parts of the restoration are not shown so they could have replaced a lot of pieces instead of restoring them.

@BINX-RR

7 ай бұрын

With the power of TikTok flip flops and a fake supreme hat anything is possible

The hardwork is mind-blowing

1 cylinder 1000cc holy crap

@mariofabrizi5050

Жыл бұрын

Exactly, 500cc at most

@itsrye8001

Жыл бұрын

@@mariofabrizi5050 it is a Honda cbr150 version 2.

That is not a 1000 cc Honda. Possibly, a 150 or 250 cc.

@mauricioavendano6294

Жыл бұрын

Callate y disfruta

@punditsushilkumar39

Жыл бұрын

Kaha ji rahe ho Honda gold wing 1800 cc ki hai

@anadil888

Жыл бұрын

@@punditsushilkumar39 13:06 ่บอล ่

@hiroshiujiie

Жыл бұрын

mistake.100cc

@mixdiver12

Жыл бұрын

This is sooooo fake 😂. Here we go again with the fake rust, just like the “computers” restorers…All rusted still inside and not a single part replaced.. what a joke

not 1000cc that is CBR 250

A fairytale.Once upon a time there was a boy with a pile of junk.And he thought he could make the general public believe he could turn it into a motorbike.

@amyk1769

2 ай бұрын

But the boy had some nice tik tok slippers 😂😂😂

An absolutely entertaining sci-fi short film!!!! 😆😆😆

Я надеюсь этот парень еще живой))))

that engine restoration part was BS

Truly a brilliant piece of fiction!

Я не верю не одному его сварочному шву . Стиль сварки называется СРАЛА МАЗАЛА 😂

Man was showing off the gas tank paint job like it wasn’t the literal worst paint job I’ve ever seen holyyyy😂

@cobravids

9 ай бұрын

I a novice body man. I did a repair on the front and rear of a van. Noone could tell I did a repair and paint feathering job. Until I went and traded it in. They saw it. That paint work was less than quality for sure.

@felipearias4830

8 ай бұрын

Esa pintura esta muy mal. Es pintura que le cae gasoline y se quita utedes me entienden 😮😢

This is going to be really interesting when they try to fix the forks onto the frame,

@user-pf5di6yq7r

Жыл бұрын

Qsq

Very nice motorbike, congratulations

Essas pessoas que restaura parece ter super poderes, uma moto toda queimada ele não troca uma peça aí a moto funciona direitinho esses ferro velho tem que contratar esses cara para conserta .carro é moto 😂😂😂

Двигатель данного мотоцикла собран по всем правилам механики, особенно заваренный поршень!

this would be incredible if infact that was the same bike cause that clear coat on the tank was obviously not the same one in the video unless you sanded it all down again all the way down to the bondo

@jimg8887

Жыл бұрын

The tank looked like a milk dud when he finished painting it... 😂

@mightyman8028

Жыл бұрын

@@jimg8887 Lol totally

@Tomo01234

11 ай бұрын

this is fake restoration video. and that engine is done no way it'll run

Hermoso trabajo saludos desde El Salvador 🇸🇻

Awesome little 125 project 😂

Best of luck wielding a frame back together! Good Luck!

I dont think its the same bike

It's hard to call it a restoration. I'm surprised he's wound up)))

@cobravids

9 ай бұрын

More like a patch up

Много не показанно, по итогу видно совсем не то, что делалось на видео.

This super 👍👍 they were born with an engine in their hands .Not a Canadian or an American who would do that . Congratulations to him . 🇨🇦👍👍👍👍👍🇨🇦

*_There's just something magical about watching something that was so old and broken being restored back to looking so new. Its such a thing to watch. ❤_*

@moppelruel

Жыл бұрын

😂😂😂😂😂😂😂😂

@dyakdaphogii-thewanderinga7695

Жыл бұрын

He is just fooling his self and all the viewers here who doesnt know motorcycle repairs and mechanic commented praising his work.. Waste of time.🤣🤣🤣🤣

Incrível a capacidade de restaurar uma moto nessas condições, Parabéns 👏👏. Se eu desmontasse iria ser jogado para o ferro velho porque jamais conseguiria montar de novo😂. Abraço do Brasil 🇧🇷👍👏👏

@MOSTRACOMOFAZMCF

Жыл бұрын

A moto do final do vídeo e a sucata do começo não são a mesma. Por que você acha que ele pulou a parte mais importante que seria recolocar o motor no quadro, religar todos os sensores e etc, e pula para a montagem das carenagens ? Um motor nessas condições não volta a rodar simplesmente com uma "limpeza" mal feita como no vídeo. Isso só falando por alto sem entrar em detalhes. Olhem por volta dos 30 minutos do vídeo como as carenagens pintadas sem lixar estão cheias de relevos e olhem na montagem final como a pintura está lisa só com uns descascados na pintura, da mesma forma o motor. Se for procurar detalhes tem muito mais.

@Rinoeldosvideos

Жыл бұрын

E mais... Onde é que já se viu ferrugem em pneu, pessoas?

@elizeuferreiradasilva3647

11 ай бұрын

Eu nem acredito que assisti esse vídeo inteiro pra ter um final tão frustrante. Deslike👎. Mas quando vi a solda e a pintura mal feitas já sabia que não ia prestar!

@fernando.dragaossj3

8 ай бұрын

Motos totalmente diferentes. O motor ficou deplorável, e da pra ver que se trata de outra moto

@motoimz430

7 ай бұрын

Братан, это не ремонт, а пустая трата времени. Они ничего там не поменяли, покраску производили по ржавчине. Раму сварили как попало. На этом мотоцикле опасно ездить

Its not the same bike because when he cuts to the video of him assemblying it you can notice a three things 1. Paint is not the same 2. Engine is not "freshly" painted 3. The frame welds are gone like the frame was never broken

Почему наши умельцы не умеют так ремонтировать-заварил поршень, отмыл немного, зашпаклевал бак с дырками. а им все новое подавай?😀😀😀

@user-oc8kt7wn5n

10 ай бұрын

дааааа, как он искусно дыру в баке шпаклевкой заибенил..... а.... уметь так надо

@user-yp1bu5if5s

2 ай бұрын

Меня убило когда он поршень стал варить!

Contando con lo que tenía... Buen trabajo!! Eso sí, 2000cc😂😂

You need a sand blasting cabinet

😢fake, i might believe the body restoration but the engine (!!!) Pffftt, the rusted timing chain, the falling off valve... Hahaha wat a laugh!!

@jostouw4366

Жыл бұрын

The flame cut frame was no accident either

При сварке использовал в качестве посредника пруток арматуру периодического профиля? Ну хотя бы гладкий, или просто болт креплени какой нибудь

1000cc for 1 cyl🤣, it's CBR 150 Thai 2014,.... however it's awesome works

Wow, if this wreck (and that's an understatement) can be restored, anything can.

did i missed it or the gear box was oky

Total litas tingkat tinggi.mantapp bro.salam dari indonesia.👍👍👍

Hm, nasty. props for making it run. hard to call it restoration though.

Es correcto esa moto es posible 200 pero lo que si son exelentes mecánicos además aprendes observando los vídeos 👍👍👍👍👍

Asombroso!!!la capacidad de encontrar otraoto y simular que la restauró 🤣🤣🤣💞

@erikaa1268

8 ай бұрын

cada vez gente me sorprende que tonta que es👏tu crees que soldando piston sin desmontar a motor no pasaria nada? restauración del moto 0 y luego pintura sobre la grasa🤓

7 ай бұрын

Ya te digo es muy falsa esa restauración, como que sea una Honda de 1000cc con un sólo cilindro...

What a mess!!.............you did an awesome job!

I think you could make a new one in the same while

Ese arreglo no me ha terminado de convencer

@nexxo9352

Жыл бұрын

Es una moto diferente la del final xd

Oh that piston is fully restored, a little welded and it’s like new. Ready to run

Bonjour ''pourrais avoir histoire culte

bro no 1000cc 4 inline yes 1 cylinder 250cc?

What brand ..1000 cc one cylinder i think ..200 cc yarn

Think you have the gloves on the wrong way the green bit gose on the parm off the hand not at the top

Желаем пацану успехов.И поофессионального роста.

39:59 a valve cup is missing. Ready to be scrapped again

Pusieron el mismo pistón? Mismo cilindro? Solo limpiaron el motor? Mmm una acelerada y explota o ni prende

I've always wanted a motorcycle racing car

the title says "motorcycle racing car" hahaha

1000cc!!!! I don't know? Whatever it is, great build. 👍

Absolutely incredible liars.)

@mightyman8028

Жыл бұрын

There's no way that's the same bike

Hahaha single cylinder, 1000 CC😂

@badspy100

Жыл бұрын

🤣🤣🤣🤣🤣

Parabéns cara ficou muito bom trabalho muito bem msm

I think that's a Honda VFR 750F from the late 80s to mid 90s I had one back in 1998 that I used to go to college with . It was 1997 Red.

He welded the top of the piston. You can’t do that. He cobbled that bike back together. Wow. Well done.

@johncorlett3699

4 ай бұрын

didnt even take the piston off, filled the crankcase with spatter and filings........jeeze

This looks like a cbr 150 to me

Luar biasa dari kondisi. awal yg sudah hancur bisa jadi seperti motor yg bagus tapi saya juga yakin pasti banyak spare parts yg diganti terutama di blok mesinnya. Jarang sekali orang didunia ini yg bisa membangun motor kondisi hancur sampai 90 % ini bisa di sulap menjadi motor yg bagus bahkan bengkel motor sekalipun. tidak mau mengerjakannya 😂😂😂😂 anda luar biasa 👍👍👍👍👍

El depósito quedó fatal, lo siento.

very nice job looks and sounds awesome

👊😊 ¡Excelente restauración! 😲 Pero.. ¡El vitropiso y la pared de su casa señor! ¡No los eche a perder manchandolos de pintura! 🤦🏻‍♂️

1000cc and only a single disc on the front? wow!!

Good work

VN mãi đỉnh, nhưng mà xe này CBR150 ông ơi

I believe this was fixed, made to believe it was all fixed but I reckon most was replaced and we are made to believe it was the same part that was fixed. Parts of the engine didn't even have gaskets and the bike towards the end is obviously a different bike.

Kawał dobrej roboty lecz według mnie błędne spawanie należało do środka przed spawaniem włożyć kontownik ponieważ obecne spawy puszcza i pęknie rama

@qbasfactory

5 ай бұрын

technologia z lat '45-'70'/80' w polsce.

The frame is only fit for scrap

its a CBR 150cc .how it become 1000cc

Sei propio bravissimo bravooooo complimenti

This is not 1000 cc it's Honda CBR

You guys are really very talented.And I love watching your video.Keep Growing 👍🎉

Да а ещё на спортбайке рама из профиля 20-20 ещё и шовная.👍

That is a honda cbr 150. Not 1000cc.

мне аж страшно стало за того, кто сядет за руль этой адской колесницы)

Excellent work

honda cbr 250 ...good job bro

Primera vez que veo un Honda 1000 de eso es un Honda 200 a partir de 250 es 2 cilindros y la 1000 es de 4 cilindros

If that's a 1000cc I'm Nelson Mandela

Xq trabajan en ojotas pero con guantes

Hay que ser realista el trabajo de restauración es algo serio y de dedicación loque en esta restauración no se be ya que lo hicieron pésimo el motor lo armaro con las mismas piezas oxidadas que debían esta agarrotas por la corrosión y lo más irónico es que entendió sin problemas😮

This is like one of those movies you show your friends knowing it’s bad but that’s what makes it good. I’d love to start another channel just tearing into these “restoration videos” lol

That is just unbelievable. Well done buddy.

Eu acredito em duende também.

Good jobs brother👍👍👍👍

Good restoration of the 150cc I don't know how he did it but I lost half of the screws but the description of the video says 1000cc the bike lacked a couple of displacements or I enlarged the work a bit.😂😂😂😅😅

kāpēc metināt virzuli, ja var nopirkt jaunu un skaistu

캼샤트프 벨브컵 안껴서 계속보는데 엔진이 바뀜

this is 1000CC? SOUND LIKE 125CC

Ich bin 75 Jahre alt, und habe auch selbst repariert und restauriert, Junge, du hast Ahnung und dein Schweißwissen ist fenominal, trotzdem bekommst du kein Lob von mir, warum nicht, ganz einfach, schlampige Arbeit, schlecht gespachtelt, noch schlechter geschliffen und nicht nach gearbeitet, nicht grundiert, einfach überlackiert, was man so lackieren nennt, den Motor ohne Dichtungen zusammen gebaut. Nein ich hätte mich nicht getraut solche Arbeit abzuliefern, auch wenn ich jetzt einen Shit Storm ausgelöst habe, das Video ist keine Werbung für dich.