Awesome job mate thanks for uploading ✌️

Grandioso. excelente el reemplazo por un material diferente y colorido.

Thanks for this, very informative!

@thedetailformula7046

Ай бұрын

You're welcome mate!

Very nicely and well explained! I was thinking though, what if you would cut out the holes for the pockets before you add the vinyl? Maybe then you can make it out of 1 piece? But I like your solutions aswell, it looks professional!

@thedetailformula7046

17 күн бұрын

Thanks mate! I think cutting the holes might work but would be pretty tough to know how big they should be and where to put them. Pretty easy to make mistakes I think. Don’t know till you try it I guess!

On some vinyls you can peel off the cloth backing (with enough determination) which helps MASSIVELY with stretch. Maybe it would be possible to do the vinyl in a single piece like that. It´s been a while since I´ve had my door cards apart but iirc that´s how the oem vinyl is, no backing. The only downside I´ve found is the vinyl will tear when you go beyond max stretch without enough heat but it´s pretty easy to get used to.

@thedetailformula7046

Ай бұрын

Yeah thats a good point actually. When I removed to old vinyl there was no cloth backing. Thinking back, the cloth backing on the vinyl I used didn't seem like it would come off easily

@tonistaru

Ай бұрын

@@thedetailformula7046 Yeah there´s different backings, I don´t think any are designed to peel off put some do. The backing is also what determines the stretch direction. Most are more stretchy in one direction than other. Your two piece design worked out good too👌

@thedetailformula7046

Ай бұрын

Thanks mate!

Awesome Job!!! Hope when it gets warm in the car the glue you use does it s job

@thedetailformula7046

2 ай бұрын

Yeah I agree!

Hi 2 things where do I buy the aluminium door holders and is there any advice you can give on where to buy the vinyl

@thedetailformula7046

Ай бұрын

Hey mate: Vinyl - www.mollies.nz/products/2422823?variant=44523862393123 Bracket - www.bamboliltd.com/products/new-door-panel-repair-brackets-for-bmw-e36-coupe-convertible-door-cards-m3-325i?pr_prod_strat=e5_desc&pr_rec_id=257a396d6&pr_rec_pid=8339093160261&pr_ref_pid=8340834910533&pr_seq=uniform

Amazing detailed video bro. I just took mine out to reglue the plastics at the back to make them stay on door properly but now i think i need to do this while there off. Can you please share link to get rails for the top to connect to the door please. Cheers love content your chanels underated keep it up for us e36 lovers and owners

@thedetailformula7046

3 ай бұрын

Thank you mate! Appreciate you tuning in! Link below www.ebay.com/itm/256010823063

Where did you get the mrain fabric?

@thedetailformula7046

Ай бұрын

I actually got the fabric from Etsy. Seller was called Berry I think. I just found the foam backing was to thick but it was easy to pull off

Great video good sir. Maybe I missed it, but can you link or point me in the right direction where to get the vinyl you used??

@thedetailformula7046

2 ай бұрын

Thank you mate. See link below for the vinyl i used. www.mollies.nz/products/2422823?variant=44523862393123

Great video. Where did you get the speakers?

@thedetailformula7046

2 ай бұрын

Hey mate, they are just the stock ones. I think I’ll upgrade all the speakers at some point. After wheels and suspension though!

NEED MORE VIDEOS MATE

@thedetailformula7046

Ай бұрын

I agree mate! Next week I reckon!

You can do the whole card from one piece I have done it but you need to carefully and patient

@thedetailformula7046

2 ай бұрын

Yeah I’m sure you can but I struggled. After a couple of failed attempts I decided to go the 2 piece route and I’m really happy with it. It may have been the vinyl I used being not stretchy enough, not sure. Or just not talented enough! 😂

I wodmee of there's a way to make thsi carbon fibre

Post a link for the vinyl

@thedetailformula7046

Ай бұрын

Hey mate: Vinyl - www.mollies.nz/products/2422823?variant=44523862393123