FUJIFILM X-T3 POWERING OFF CAMERA APPEARING/SHUTTER PROBLEM/DISASSEMBLE/ASSEMBLE/ FIX

repairing shutter assembly

Пікірлер: 64

  • @miko.garden2
    @miko.garden2 Жыл бұрын

    Thanks for the video. It helped me disassemble my X-T3. Except it was much easier than I expected when watching this video. I didn't need to unsolder anything, and I could leave in place many screws that you removed. :)

  • @Ghxzt2161
    @Ghxzt21612 жыл бұрын

    Awesome video. Now we need one for the X-T4. I need to replace my sensor and wanted to know how similar it is to the X-T3

  • @bludger5275
    @bludger5275 Жыл бұрын

    I have the same problem in my Xt3. In the video you said manually testing the repaired shutterr assembly. How did you repair the shutter ? Did you replace it for a new one ?

  • @romeoMvictor
    @romeoMvictor11 ай бұрын

    @techxian Great Video!! I need to replace my #2 SD Card Slot for the X-T3. Is there soldering involved? THANKS!!

  • @gerrykasehung9516
    @gerrykasehung95162 жыл бұрын

    good video ,, can u make tutorial how to change CMOS battry on fuji xt3?

  • @herfajoart
    @herfajoart3 жыл бұрын

    Thank You

  • @titoink
    @titoink3 жыл бұрын

    I have an Issue with my hotshoe this is my second time trying to repair but fuji's repair charges $500 i wish if you could disassemble an xt3 from thee top

  • @thomasnguyen2280
    @thomasnguyen22802 жыл бұрын

    Hey, Would you please let we know how to power up when changed a new main board xt3. what do you suggest or any instructions to change a new board (part bought from fuji) Thanks

  • @techxian

    @techxian

    2 жыл бұрын

    if that main board sir is the problem it should power on when you replace mainboard sir..

  • @sonpham1754
    @sonpham17543 ай бұрын

    Hello! Does X-T3 use battery or capacitor to maintain its clock and settings?

  • @SadwanMuliko
    @SadwanMuliko5 күн бұрын

    What is cmos batre for xt3 .. ?

  • @casianm
    @casianm3 ай бұрын

    Hi kuya. Have you worked on the top assembly of the xt30/ x-t cameras? I think have a loose power on / off switch on my x-t30 and camera turns off as soon as I touch the shutter button/press the area. Loose glue lang ba similar to an x-t2 button that came off? Fuji repair centre telling me i need a new main board when it seems to be just a loose button/connection.

  • @gaetanp77

    @gaetanp77

    2 ай бұрын

    Did you manage to repair you x-t30? I have the same issue with my x-t10

  • @GregorioBarzasi
    @GregorioBarzasi Жыл бұрын

    hey, i have an unresponsive xt-3 ( its turns on but stay stuck on initial setup) and the shutter seems stuck at 3/4 closed position. you think that changing the shutter may solve the problem or can be other issue there? this situation happened during a fast burst for like 10 second so maybe the problem is just the shutter and not the mainboard.

  • @techxian

    @techxian

    Жыл бұрын

    yes sir its possible that the shutter assembly is the. problem of your camera

  • @bernardthecreator

    @bernardthecreator

    4 ай бұрын

    Hellol bro. Did you ever find out what the issue was? Because I have the same problem now. Please respond, I need help! 🙏🏽🙏🏽

  • @bernardthecreator

    @bernardthecreator

    4 ай бұрын

    @GregorioBarzasi

  • @idunnnnno
    @idunnnnno Жыл бұрын

    Hey, just disassemled mine. How did you. Test your shutter in the video?

  • @techxian

    @techxian

    Жыл бұрын

    supply the shutter motor with 5v dc..

  • @idunnnnno

    @idunnnnno

    Жыл бұрын

    @@techxian in the video it looked like your shutter was opening an closing. I used 3v to Power it. It just closed and stayed there until i took the leads off. Is that supposed to happen?

  • @doctor_igor
    @doctor_igor Жыл бұрын

    Hi! Having a problem with my XT3 camera. Started 1 month ago: when taking video for my "talking head" blog, at some time second or third 30minute video will stop before 30 minutes, just stop recording. Battery is still ok, no overheating. And the file is lost, not recorded on the SD card. If you push start again it will record video again and everything is fine. But every session at least one video is always lost. I have two SD cards - SanDisk 64 and Transcend 128. Don't know what to do. Very stressing... Do you have any ideas? Thank you in advance

  • @techxian

    @techxian

    Жыл бұрын

    maybe the sd card slot is malfunctioning need to clean and adjust the contact

  • @kheanghem
    @kheanghem2 жыл бұрын

    Hello, I have a fujifilm X-T3 I have the HDMI port which has unsoldered. Do they sell the part separately? how can fix it? thank you 🇫🇷

  • @thomasnguyen2280

    @thomasnguyen2280

    2 жыл бұрын

    Hey.How do you go with your camera.(HDMI port broken) Mine is the same but couldn't repair the port .Need new main board.(All port came with it)

  • @MatiasGonzalez-hp7zq
    @MatiasGonzalez-hp7zq3 жыл бұрын

    Hello! I have had the same problem with mine (F. XT2). What did you do for make it work properly?

  • @techxian

    @techxian

    3 жыл бұрын

    there a problem on the shutter assembly..there a short in there.

  • @tim071091

    @tim071091

    2 жыл бұрын

    Had the same problem with my Xpro 2, didnt cost too much to have the shutter replaced by fujifilm

  • @alexgoeke

    @alexgoeke

    Жыл бұрын

    @@tim071091 how much did it cost?

  • @LOUANNSTV
    @LOUANNSTV2 жыл бұрын

    Can i ask if what possible damage of my cam, i cant open it

  • @techxian

    @techxian

    2 жыл бұрын

    is there any reaction of the camera when you put the battery?

  • @dmitrykashima
    @dmitrykashima2 жыл бұрын

    Hello, friend! I have shutter jammed on my xt3, at first it has same error but later not responding at all. Please assist, where exactly short on shutter board? How did you fix it? What voltage need to be sent to check shutter?

  • @techxian

    @techxian

    2 жыл бұрын

    its posible that shutter motor engine is the problem of your camera

  • @dmitrykashima

    @dmitrykashima

    2 жыл бұрын

    @@techxian any thoughts how to check once I disassemble it? Any circuit diagram in web?

  • @techxian

    @techxian

    2 жыл бұрын

    @@dmitrykashima their no circuit diagram you can see at the web..just follow the video sir..

  • @dmitrykashima

    @dmitrykashima

    2 жыл бұрын

    @@techxian Thank you! Plan to get spare shutter assy just in case before disassemble

  • @Lucidexplore
    @Lucidexplore Жыл бұрын

    I have an XT1 that's always gives rhe temperature warning and turns off within 5 minutes after being turned on. Any idea what could be the problem? It even happens if I don't take photos or videos etc.

  • @techxian

    @techxian

    Жыл бұрын

    is there a incident po dropped off or splash with water?

  • @techxian

    @techxian

    Жыл бұрын

    @TweakPivot i see there a problem with the main board sir ,ive never encountered that problem in fujifilm , in sony camera i already encountered that problem, you have to troubleshoot the mainboard to find the damage parts or else replace the mainboard sir...

  • @Lucidexplore

    @Lucidexplore

    Жыл бұрын

    @@techxian here is a video showing what exactly happened kzread.info/dash/bejne/X5t3ss56qr3Op8o.html

  • @marineg8397
    @marineg8397 Жыл бұрын

    Hi, my fuji XT20 is not turning on anymore. I tried with a new battery, the screen stays black. When I plug in to power the charging light turns green. Do you have any idea what could be the problem ?...

  • @techxian

    @techxian

    Жыл бұрын

    its possible there a short circuit in the shutter assembly...

  • @lexteryap7514
    @lexteryap75148 ай бұрын

    Hi where are you based? Can i send my Xt3 for repair. Shutter button and power on off lever is stuck... (Salt build up)

  • @techxian

    @techxian

    8 ай бұрын

    bagumbayan sta cruz laguna philippines

  • @wanderingjackie7
    @wanderingjackie7 Жыл бұрын

    Hello sir i have my shutter windows on my xt2 stucked. Do you know how much will it cost to have it fixed?

  • @techxian

    @techxian

    Жыл бұрын

    it could cost sir from 2500 to 3500 pesos

  • @zeroko8621
    @zeroko8621 Жыл бұрын

    hi, i have xt3 with shutter not fully open. How to fix? Thank you

  • @techxian

    @techxian

    Жыл бұрын

    replace the shutter assembly sir if you cannot repair it..just like this video you will know to replace it

  • @Tbonyandsteak
    @Tbonyandsteak2 жыл бұрын

    NOOO, no, pls no, nooooo, no NOT my beloved XT2. Something are defferently going wrong changing the buttom.......That cant f... be true that you have disassemply everything to change the bottum....

  • @alexgoeke
    @alexgoeke Жыл бұрын

    Does anyone know how much it costs to get it replaced by Fujifilm?

  • @tatendamakwavarara1411

    @tatendamakwavarara1411

    Жыл бұрын

    about R7500 in SA

  • @KKrasGxXx
    @KKrasGxXx3 жыл бұрын

    Hello sir mine have green display lcd is it a flex or lcd problem

  • @techxian

    @techxian

    3 жыл бұрын

    check the flexcable first sir if there a damage on it...if the flexcable is okey there a change that the lcd panel or the drive board is the problem...

  • @KKrasGxXx

    @KKrasGxXx

    3 жыл бұрын

    @@techxian thank you so much

  • @techxian

    @techxian

    3 жыл бұрын

    @@KKrasGxXx welcome po sir

  • @KKrasGxXx

    @KKrasGxXx

    3 жыл бұрын

    @@techxian sir may shop po kayo kung sakali?

  • @techxian

    @techxian

    3 жыл бұрын

    @KKrasGxXx meron po sir. techxian camera repair service...sta cruz laguna po

  • @jacksoneffiong7492
    @jacksoneffiong74923 жыл бұрын

    X-T3 shutter release not shooting immediately. what should i do?

  • @techxian

    @techxian

    3 жыл бұрын

    there a short in shutter assembly sir or replace the shutter assembly if you cannot repair it

  • @jacksoneffiong7492

    @jacksoneffiong7492

    3 жыл бұрын

    Thanks but how do I replace it and where do I find it? Do you have a video or link online to replace it. thanks

  • @techxian

    @techxian

    3 жыл бұрын

    @@jacksoneffiong7492 is on my video sir just buy to aliexpress the part that i repair and replace that

  • @medinavlog4140
    @medinavlog4140 Жыл бұрын

    hello sir, how remove board shutter botton X-T3? my camera is problem

  • @techxian

    @techxian

    Жыл бұрын

    if the button is stuck up sir you need to removed the lock with has been press is quite hard to remove or change the top assembly if you cannot repair it..

  • @medinavlog4140

    @medinavlog4140

    Жыл бұрын

    @@techxian thanks i'll to try. where are you from sir?

  • @sarathr1654
    @sarathr16543 жыл бұрын

    My camera is not turning on ..Please Help me